EngineeringRise

Energy Conservation and Vertical Circle: JEE Main Notes

Reviewed Last updated 2026-11-20. Syllabus topic: Potential energy, conservation of energy and vertical circle.

In short. A conservative force has a potential energy, and then K + U is constant. Spring energy is 0.5 k x² and gravitational energy near the ground is m g h. In a vertical circle with a string, the least speed at the top is sqrt(g R), which needs sqrt(5 g R) at the bottom.

  • A force is conservative if its work between two points does not depend on the path, or equivalently if its work around any closed loop is zero; gravity and the spring force are conservative, friction and drag are not.
  • Spring potential energy is U = 0.5 k x² with x measured from the natural length, for stretch and for compression alike; the work from x1 to x2 is 0.5 k (x2² - x1²).
  • Mechanical energy K + U is conserved when only conservative forces (or forces that do no work, like a normal force on a smooth surface) act; otherwise W_nc = change in (K + U).
  • Vertical circle on a string: v_top² is at least g R and v_bottom² is at least 5 g R; on a rod or bead the least speed at the top is zero, so v_bottom² is at least 4 g R.
  • Tension at angle theta from the lowest point is T = m v_bottom²/R + m g (3 cos(theta) - 2) for a string, found from energy conservation plus the radial equation.

Syllabus line: Work, Energy and Power Work done by a constant force and a variable force, kinetic and potential energies, work-energy theorem, power. The potential energy of a spring, conservation of mechanical energy, conservative and non- conservative forces, motion in a vertical circle. Elastic and inelastic collisions in one and two dimensions. (NTA JEE (Main) 2026 syllabus, Physics, Unit 4 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

  • Work, kinetic energy and power: Energy conservation is the work-energy theorem with potential energy. Read this first if W_net = change in K is not clear.
  • Dynamics of circular motion and banking: Vertical circle needs the radial equation T - m g cos(theta) = m v²/R. Read this first if centripetal force is unfamiliar.
  • Friction: Non-conservative problems need the friction force and its work. Read this first if f = mu N is not automatic.

Related topics

The concept step by step

  1. Conservative and non-conservative forces

    A force is conservative if the work it does between two points is the same along every path. Equivalently, the work around any closed loop is zero. Gravity and the spring force pass this test. Friction does not: sliding a box along a long and a short path between the same points loses more energy on the long path. Only conservative forces have a potential energy.

  2. Potential energy as stored work

    The potential energy U of a conservative force is the negative of the work the force does: change in U = -W by the force. Near the ground, lifting a mass m through a height h stores U = m g h, with the height measured from a chosen zero level. Only differences of U matter, so the zero level can be chosen to make the algebra simplest, but it must be the same at the start and at the end.

  3. Energy stored in a spring

    A spring pulls back with F = k x, where x is the stretch or compression from the natural length. Pulling it slowly from 0 to x needs the average force 0.5 k x over the distance x, so U = 0.5 k x². The energy is the same for compression and stretch of the same size. To go from x1 to x2 the work is 0.5 k (x2² - x1²), the difference of squares, not 0.5 k (x2 - x1)².

  4. Conservation of mechanical energy

    If only conservative forces do work, the kinetic energy gained equals the potential energy lost, so K + U is constant. A normal force on a smooth surface and the tension in a string moving along a circle do no work, so they do not spoil the conservation. If friction acts, the work of friction is the energy lost: W_nc = change in (K + U). Use it for a block sliding down a rough curve.

  5. The vertical circle on a string

    At the top of a string circle the weight and tension both point to the centre, so m g + T = m v²/R. The string stays taut while T is at least zero, so v_top² is at least g R. Energy conservation over the fall of 2R gives v_bottom² = v_top² + 4 g R, so the least speed at the bottom is sqrt(5 g R). At this speed the tension at the bottom is m g + 5 m g = 6 m g.

  6. Bead on a wire, loops and leaving a surface

    A bead on a rigid wire or a body on a rod can be pushed as well as pulled, so it can reach the top with almost zero speed and the least bottom speed is sqrt(4 g R). A block sliding down a smooth track into a loop needs a starting height of 2.5 R above the bottom to just complete it. A block sliding on the outside of a smooth sphere leaves it when the normal force drops to zero, at cos(theta) = 2/3 from the top.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

A 0.5 kg ball is dropped from a height of 5 m. Find its speed just before reaching the ground, neglecting air resistance. Take g = 10 m/s².

Marks-style solution of example 1
StepMarks
Only gravity does work, so mechanical energy is conserved.1
m g h = 0.5 m v², so v² = 2 g h = 2 x 10 x 5 = 100.1
v = 10 m/s.1
Total: 3 marks3

Answer: 10 m/s

Fast method: v = sqrt(2 g h) = sqrt(100).

Sanity check: The mass cancels, as for any free fall. Units: sqrt(m/s² x m) = m/s. It matches v² = u² + 2as with u = 0.

Example 2 (easy)

A light spring of force constant 400 N/m is compressed by 5 cm. Find the energy stored in it.

Marks-style solution of example 2
StepMarks
Convert to metres: x = 0.05 m.1
U = 0.5 k x² = 0.5 x 400 x (0.05)².1
U = 0.5 J.1
Total: 3 marks3

Answer: 0.5 J

Fast method: U = 200 x 0.0025 = 0.5 J.

Sanity check: Units: N/m x m² = N m = J. Forgetting to convert 5 cm to metres would give 5000 J, a clear order-of-magnitude error.

Example 3 (medium)

A spring needs work W to stretch it from its natural length by 2 cm. How much more work is needed to stretch it from 2 cm to 4 cm, as a multiple of W?

Marks-style solution of example 3
StepMarks
Work from 0 to x is 0.5 k x², so W = 0.5 k (2)² with x in cm.1
Work from 2 cm to 4 cm = 0.5 k (4² - 2²) = 0.5 k x 12.1
The ratio is 12/4 = 3, so 3 W more is needed.1
Total: 3 marks3

Answer: 3 W

Fast method: Squares of 2 and 4 are 4 and 16: step two is 16 - 4 = 12 against 4, a ratio of 3.

Sanity check: Total work for 4 cm is 4 W, so the second step is 4 W - W = 3 W, consistent. Doubling the extension quadruples the energy.

Typical trap: Assuming the second 2 cm needs the same work W as the first. The force grows with extension, so the second step needs three times as much.

Example 4 (medium)

A 2 kg block slides down a rough curved track from a height of 5 m and reaches the bottom with a speed of 8 m/s. Find the work done by friction. Take g = 10 m/s².

Marks-style solution of example 4
StepMarks
Loss of potential energy = m g h = 2 x 10 x 5 = 100 J.1
Kinetic energy gained = 0.5 x 2 x 64 = 64 J.1
Work by friction W_f = 64 - 100 = -36 J, so 36 J goes to heat.1
Total: 3 marks3

Answer: -36 J

Fast method: Compare 100 J of height energy with 64 J of speed energy; the gap is the loss.

Sanity check: The result is negative as friction work must be, and its size 36 J is less than the 100 J available. If the track were smooth the speed would be sqrt(2 g h) = 10 m/s, more than 8 m/s.

Example 5 (hard, multi-step)

A 0.5 kg stone is tied to a light string of length 2 m and whirled in a vertical circle. At the lowest point it has the least speed that lets it complete the circle. Find the tension when the string is horizontal. Take g = 10 m/s².

Marks-style solution of example 5
StepMarks
Least speed at the top: v_top² = g R = 20 (m/s)².1
Energy from the top to the horizontal position (drop of R): v² = 20 + 2 x 10 x 2 = 60.2
At the horizontal position the tension alone supplies the centripetal force, so T = m v²/R = 0.5 x 60/2.1
T = 15 N.1
Total: 5 marks5

Answer: 15 N

Fast method: For the least-speed case T at the horizontal position is 3 m g = 3 x 0.5 x 10 = 15 N.

Sanity check: The tension 15 N lies between 0 at the top and 6 m g = 30 N at the bottom, as expected. Units: kg x (m/s)²/m = N.

Example 6 (hard, multi-step)

A 2 kg block moving at 6 m/s on a smooth floor enters a rough patch 2 m long (kinetic friction coefficient 0.2), then meets a light spring of force constant 1400 N/m on a smooth floor. Find the maximum compression of the spring. Take g = 10 m/s².

Marks-style solution of example 6
StepMarks
Initial kinetic energy = 0.5 x 2 x 36 = 36 J.1
Friction on the patch: 0.2 x 2 x 10 = 4 N over 2 m, so 8 J is lost. Energy at the spring = 28 J.2
At maximum compression the block is momentarily at rest: 0.5 x 1400 x x² = 28, so x² = 0.04.2
x = 0.2 m.1
Total: 6 marks6

Answer: 0.2 m

Fast method: Energy left 28 J equals 700 x², so x = sqrt(0.04) = 0.2 m.

Sanity check: Without the patch x would be sqrt(36/700) = 0.227 m; friction lowers it to 0.2 m, as it must. Units: sqrt(J/(N/m)) = m.

Example 7 (medium)

A small bead of mass 0.1 kg is threaded on a smooth vertical circular wire of radius 0.5 m. Find the least speed at the lowest point for the bead to reach the top. Take g = 10 m/s².

Marks-style solution of example 7
StepMarks
A bead on a wire can be pushed or pulled by the wire, so it can reach the top with speed almost zero.1
Energy from bottom to top (rise 2R = 1 m): 0.5 v² = g x 2R = 10.1
v² = 20, so v = 4.47 m/s.1
Total: 3 marks3

Answer: 4.47 m/s

Fast method: v = sqrt(4 g R) = sqrt(20).

Sanity check: The value 4.47 m/s is below the 5 m/s needed for a string, sqrt(5 g R), because the wire can push at the top. Units: sqrt(m/s² x m) = m/s.

Typical trap: Using sqrt(5 g R) = 5 m/s, which is the string case. A wire or rod can supply an inward push, so the top speed may be zero.

Formulas and units

Formula and unit box for Potential energy, conservation of energy and vertical circle
ResultFormulaValid whenUnits or noteWorked example
Gravitational potential energy (near the ground)U = m g hnear Earth's surface where g is constant; h from a chosen reference levelJExample 1
Spring potential energyU = 0.5 k x² (x from the natural length)ideal spring within Hooke's law range; x from the natural lengthJExample 2
Work to change spring extensionW = 0.5 k (x2² - x1²)ideal spring within Hooke's law range; x1 and x2 from the natural lengthJExample 3
Conservation of mechanical energyK1 + U1 = K2 + U2 (only conservative work)only conservative forces do work; other forces absent or do no workJExample 1
With frictionK1 + U1 + W_nc = K2 + U2, W_nc = -mu N (path length)kinetic friction is the only non-conservative work; use total path lengthJExample 4
Vertical circle, string: top and bottomv_top >= sqrt(g R); v_bottom >= sqrt(5 g R)smooth circle in a vertical plane with a string or inside a track (no inward push)m/sExample 5
Vertical circle, rod or beadv_top >= 0; v_bottom >= sqrt(4 g R)smooth vertical circle with a rod, tube or wire that can push and pullm/sExample 7
String tension at angle theta from the bottomT = m v_b²/R + m g (3 cos(theta) - 2)string stays taut in a vertical circle; theta from lowest point, v_b at the bottomNnone
Loop track: least start height; leaving a smooth hemisphereh = 2.5 R; leaves at cos(theta) = 2/3smooth surfaces, body sliding (not rolling) from rest at the stated starth and R in m; cos(theta) has no unitnone

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Using 0.5 k (x2 - x1)² for the work between two extensions. Why it tempts: The change in extension looks like the relevant quantity, but the energy is quadratic, so subtract the squares.
  • Leaving out the extra fall during compression when a block drops on a spring. Why it tempts: The drop height h is given in the stem, so m g h = 0.5 k x² looks complete, but the block keeps falling by x while it compresses the spring.
  • Using sqrt(5 g R) for a bead on a wire or a rod. Why it tempts: The string result is memorised as the vertical circle answer, but a rod can push, so the top speed can be zero and the bottom speed is sqrt(4 g R).
  • Counting the work of the normal force or the string tension in a smooth circular or curved motion. Why it tempts: Every force on the diagram seems to need a work term, but forces perpendicular to the velocity do no work.
  • Writing friction work as mu m g times the height or the straight-line distance. Why it tempts: Gravity work uses the height, so the same habit is carried over, but friction work uses the path length along the surface and the normal force.

Time per question and fast method

Target: about 100 seconds per question.

Write K + U before and after, mark the zero level at the lowest point, and add the friction work if any. For a string circle quote the least speeds directly: sqrt(g R) at the top, sqrt(5 g R) at the bottom, tension difference 6 m g between the bottom and the top. For a spring, use 0.5 k times the difference of squares.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. Energy stored in a spring of force constant 1000 N/m compressed by 0.02 m, in joules, is
Show the answer

Answer: A: 0.2. U = 0.5 x 1000 x (0.02)² = 0.2 J.

Question 2. A string circle has radius 0.4 m. The least speed at the top for a complete circle, in m/s, is (g = 10 m/s²)
Show the answer

Answer: B: 2. v_top = sqrt(g R) = sqrt(10 x 0.4) = 2 m/s.

Question 3. For the same circle, the least speed at the lowest point, in m/s, is (g = 10 m/s²)
Show the answer

Answer: A: 4.47. v_bottom = sqrt(5 g R) = sqrt(20) = 4.47 m/s.

Question 4. A smooth loop of radius 0.4 m: the least height above the bottom from which a block must slide to complete it, in metres, is
Show the answer

Answer: B: 1.0. h = 2.5 R = 2.5 x 0.4 = 1.0 m.

Question 5. Which of these forces is non-conservative?
Show the answer

Answer: C: Kinetic friction. Work by kinetic friction depends on the path length, so it is path dependent and has no potential energy.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Conservative forces, potential energy and the zero level

A force is conservative if its work between two points is path independent, so the work around a closed loop is zero, and then F = -dU/dx in one dimension. Gravity near the surface and the ideal spring force are conservative. Friction and air drag are not, and for them no potential energy is defined. The work done by a conservative force equals the fall in its potential energy. The value of U at one point is arbitrary because the zero level is a free choice, so only differences U2 - U1 carry meaning; mark the zero level once, for example at the lowest point of the path, and use it throughout. Units: joule, dimensions M L² T⁻2. A common test is to ask why work by friction on a round trip is not zero, and the reason is that friction always acts against the velocity, so every piece of the path adds negative work.

Spring energy: stretch, compression and the equilibrium shift

U = 0.5 k x² with x from the natural length, for stretch and compression equally. The work by an external agent in moving from x1 to x2 slowly is 0.5 k (x2² - x1²), so the step from 2 cm to 4 cm needs 3 times the work of the step from 0 to 2 cm. The work done by the spring itself is the negative of this. For a block hanging at rest from a vertical spring the stretch is x0 = m g/k. If the block is released from the natural length, the energy equation m g x = 0.5 k x² gives a maximum stretch of 2 m g/k, twice the equilibrium stretch, and the motion is oscillation about x0. With a gravity term included, a block dropped on a spring compresses it by x where m g (h + x) = 0.5 k x²; the fall during compression, x, must be counted. A spring that is cut or has other springs attached is not asked at this level, so treat k as given.

Conservation of mechanical energy and non-conservative work

The rule is K1 + U1 + W_nc = K2 + U2, where W_nc is the work of friction and other non-conservative forces and is negative for friction. For a block sliding on a rough path, the energy lost as heat equals mu N times the path length along the surface, not the straight displacement. A normal force on a smooth surface, the tension of a string in circular motion and the force at a fixed pivot do no work, so they do not appear. Choose the system with care: for a block and a spring together the spring force is internal and U_spring belongs in the energy, while for the block alone the spring force does work and there is no U_spring. Never use both. When the speed at the end is asked and no time is involved, energy methods are shorter than Newton's laws, and the answer can be checked with v² = u² + 2as when the acceleration is constant.

Motion in a vertical circle: string, rod and track

For a particle of mass m on a string of length R, with speed v at angle theta from the lowest point, v² = v_b² - 2 g R (1 - cos(theta)) and T = m v²/R + m g cos(theta), giving T = m v_b²/R + m g (3 cos(theta) - 2). At the top, theta = 180 degrees, T = m v_b²/R - 5 m g, and T at least zero needs v_b² at least 5 g R, so the top speed is at least sqrt(g R). At the horizontal position with v_b² = 5 g R, T = 3 m g. The tension difference between bottom and top is always 6 m g, whatever the speed, which is a frequently tested result. For a rod or bead on a wire the top speed can be zero, so v_b² is at least 4 g R, and the rod can push or pull. For a loop track, the block loses contact if the normal force becomes zero; the least starting height on a smooth track is 2.5 R above the lowest point, and a bead on a wire needs 2 R. If the speed is between sqrt(2 g R) and sqrt(5 g R) at the bottom, the string goes slack above the horizontal and the body moves as a projectile, which is a conceptual check rather than a calculation here.

What examiners test and edge cases

Typical forms: speed after a fall or slide with a given height; compression of a spring by a falling or moving block, with or without friction; the energy lost to friction on a rough curved track; the least speed and the tension in a vertical circle; the height from which a block must slide to complete a loop; the leaving point on a smooth hemisphere. Edge cases: a smooth track conserves energy even when the shape is curved, because the normal force is perpendicular to the motion; tension at the top is zero for the least-speed case; and a spring with a block on a rough surface stops short of the point where energy would be fully converted, so write friction work with the full path travelled. Check units, the sign of tension (never negative) and the limiting case of zero friction. Expected time: about 90 to 120 seconds, and up to 3 minutes for the vertical circle with extra steps.

Memory hook

Suppose a child sits on a playground swing in a park and you pull the swing back and let it go.

  1. At the highest point the swing stops for a moment: all the energy is stored as height, and no energy is in speed.
  2. As it comes down the stored height energy turns into speed, so it is fastest at the lowest point.
  3. At the lowest point the chains pull harder than the child's weight, because they must also turn the child along the curve.
  4. After many swings it dies down, because rubbing at the hooks and air take energy away: that part is not conservative.

Height energy turns into speed and back again without loss when only conservative forces act, and the string tension at the bottom is more than the weight because it also supplies the turning force.

Energy is only moved between K and U, unless friction takes it: K + U = constant.

Revision card

Try to answer each without looking above.

  1. State the test for a conservative force and name two conservative and two non-conservative forces.
  2. Write the spring energy and the work between two extensions, and say why squares are subtracted.
  3. State when K + U is conserved and what changes when friction acts.
  4. Give the least speeds at the top and the bottom of a vertical circle on a string.
  5. How do the least speeds change for a rod or a bead on a wire?
  6. Where does a block leave a smooth hemisphere, and what is the condition?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (see content/reviews/scope-audit-2026-11-20.md)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 3; fixed: 3
  • Report: content/reviews/learn2-wep-2026-11-20.md

Textbook references

  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 5: Work, Energy and Power, 5.7 THE CONCEPT OF POTENTIAL ENERGY (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 5: Work, Energy and Power, 5.9 THE POTENTIAL ENERGY OF A SPRING (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 5: Work, Energy and Power, 5.8 THE CONSERVATION OF MECHANICAL ENERGY (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 4 (https://jeemain.nta.nic.in/document/syllabus-2026/), read from syllabus/lines/jee-main/2026.json
  • Standard results are derived in the notes and every number is recomputed by code; no textbook section was opened for this page, so section references are pending

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.