EngineeringRise

Circular Motion Dynamics and Banking: JEE Main Notes

Reviewed Last updated 2026-11-20. Syllabus topic: Dynamics of circular motion and banking.

In short. Centripetal force is not a new force: it is the net force along the radius, pointing to the centre, and it equals m v²/r. For a vehicle on a road, find the real forces along the radius (friction, normal force) and set their sum to m v²/r.

  • Along the radius, net inward force = m v²/r = m w² r; draw only real forces and never add a separate centripetal arrow.
  • Level road: static friction provides the force, so v_max = sqrt(mu r g) and the smallest safe radius is r_min = v²/(mu g); mass cancels.
  • Banked road, no friction: tan(theta) = v²/(r g); the normal force at this speed is m g/cos(theta).
  • Banked road with friction: v_max = sqrt(r g (tan(theta) + mu)/(1 - mu tan(theta))) and v_min = sqrt(r g (tan(theta) - mu)/(1 + mu tan(theta))).
  • If mu is at least tan(theta), v_min = 0; lowering mu lowers v_max, and raising theta raises the ideal speed.

Syllabus line: Laws of Motion Force and inertia, Newton's first law of motion, momentum, Newton's second Law of motion, impulse, Newton's third Law of motion. Law of conservation of linear momentum and its applications, equilibrium of concurrent forces. Static and Kinetic friction, laws of friction, rolling friction. Dynamics of uniform circular motion, centripetal force and its applications: vehicle on a level circular road, vehicle on a banked road. (NTA JEE (Main) 2026 syllabus, Physics, Unit 3 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

Related topics

The concept step by step

  1. Turning needs a force towards the centre

    A body moving in a circle at constant speed keeps changing direction, so its velocity changes and it has an acceleration. This acceleration points to the centre and has size a = v²/r, or w² r if w is the angular speed in rad/s. By Newton second law the net force along the radius must be m v²/r. This is the centripetal force. It is not a separate force: it is the sum of real forces such as tension, friction, normal force or a component of weight.

  2. Method: pick the radial axis and write one equation

    Draw the body with its real forces only. Choose one axis along the radius pointing to the centre and one perpendicular to it. Along the radius write (forces towards centre) - (forces away from centre) = m v²/r. Along the other axis the acceleration is zero, so forces balance. Never draw an extra arrow named centripetal force, because the inward direction is already covered by the real forces such as friction and the normal force.

  3. Level road: friction turns the car

    On a flat road the only force pointing to the centre is static friction between tyres and road. Its largest value is mu m g, because N = m g here. So m v²/r is at most mu m g, giving v_max = sqrt(mu r g). Mass cancels, so a heavy truck and a light car have the same limit. Example: mu = 0.4, r = 50 m gives v_max = sqrt(0.4 x 50 x 10) = 14.1 m/s. Going faster, the car skids outward.

  4. Banked road: the normal force helps

    Tilt the road by angle theta with the outer edge higher. The normal force N is now tilted and has a horizontal part N sin(theta) pointing to the centre. With no friction: N cos(theta) = m g and N sin(theta) = m v²/r. Divide to get tan(theta) = v²/(r g), so v = sqrt(r g tan(theta)). At this design speed the car needs no friction at all. Faster or slower speeds need friction to act down or up the slope.

  5. Banking with friction: the two limiting speeds

    At the largest speed friction acts down the slope and is at its limit mu N: N cos(theta) = m g + mu N sin(theta) and N sin(theta) + mu N cos(theta) = m v²/r. Dividing gives v_max = sqrt(r g (tan(theta) + mu)/(1 - mu tan(theta))). At the smallest speed friction acts up the slope, and v_min = sqrt(r g (tan(theta) - mu)/(1 + mu tan(theta))), valid when mu is less than tan(theta). Between the two speeds the car stays on the curve.

  6. What changes the limiting speed: friction, angle and radius

    On a level road v_max = sqrt(mu r g), so halving mu divides v_max by the square root of 2, and the smallest safe radius at a given speed doubles. On a bank the ideal speed sqrt(r g tan(theta)) grows with tan(theta), and friction widens the safe band on both sides of it. Example: r = 50 m and tan(theta) = 0.75 give an ideal speed 19.4 m/s; with mu = 0.5 the band is 9.5 m/s to 31.6 m/s. If mu is at least tan(theta), the lower limit is 0 and only the upper limit matters.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

A car turns on a level road of radius 50 m. The coefficient of static friction between tyres and road is 0.4. Find the maximum speed at which it can turn without skidding. Take g = 10 m/s².

Marks-style solution of example 1
StepMarks
Only static friction points to the centre, and its maximum is mu m g since N = m g.1
m v²/r = mu m g, so v = sqrt(mu r g) = sqrt(0.4 x 50 x 10) = sqrt(200).1
v_max = 14.14 m/s (about 51 km/h).1
Total: 3 marks3

Answer: 14.1 m/s

Fast method: v = sqrt(mu r g): 0.4 x 50 x 10 = 200, and sqrt(200) = 14.1.

Sanity check: Units: sqrt(m x m/s²) = m/s. A larger mu or radius should allow a larger speed, and mass does not appear, as expected. Setting mu = 0 gives zero speed, so no turn is possible on a smooth road.

Example 2 (easy)

A stone of mass 0.2 kg is whirled on a smooth horizontal table by a string of length 0.5 m at a steady speed of 4 m/s. Find the tension in the string.

Marks-style solution of example 2
StepMarks
The string tension is the only force towards the centre, so T = m v²/r.1
T = 0.2 x 4²/0.5 = 0.2 x 16/0.5.1
T = 6.4 N.1
Total: 3 marks3

Answer: 6.4 N

Fast method: m v²/r = 0.2 x 16/0.5 = 6.4 N; halve r and T doubles.

Sanity check: Units: kg x (m/s)²/m = newton. If the speed doubled the tension would become 25.6 N, four times as large, matching the v² dependence.

Example 3 (medium)

A frictionless banked road of radius 90 m has tan(theta) = 0.4. Find the speed at which a car needs no friction to take the turn. Take g = 10 m/s².

Marks-style solution of example 3
StepMarks
Vertical balance N cos(theta) = m g and radial N sin(theta) = m v²/r.1
Divide: tan(theta) = v²/(r g), so v² = 90 x 10 x 0.4 = 360.1
v = sqrt(360) = 18.97 m/s, about 68 km/h.1
Total: 3 marks3

Answer: about 19.0 m/s

Fast method: v² = r g tan(theta) = 900 x 0.4 = 360, and 19² = 361.

Sanity check: With theta = 0 the formula gives v = 0, which matches a smooth flat road. Reasonable speed for a banked curve of this radius. Mass is absent.

Example 4 (medium)

On a dry level road of radius 80 m a car can just turn at 20 m/s without skidding. After rain the coefficient of friction becomes 0.2. Find (a) the new maximum speed and (b) the smallest radius needed to turn at 20 m/s on the wet road. Take g = 10 m/s².

Marks-style solution of example 4
StepMarks
Dry road: mu = v²/(r g) = 400/(80 x 10) = 0.5.1
Wet road, same radius: v = sqrt(mu r g) = sqrt(0.2 x 80 x 10) = sqrt(160) = 12.65 m/s.2
Wet road at 20 m/s: r_min = v²/(mu g) = 400/(0.2 x 10) = 200 m.1
Answers: maximum speed 12.65 m/s (about 12.6 m/s) and smallest radius 200 m.1
Total: 5 marks5

Answer: (a) about 12.6 m/s; (b) 200 m

Fast method: v is proportional to sqrt(mu): 20 x sqrt(0.2/0.5) = 20 x 0.632 = 12.65 m/s. r_min is proportional to 1/mu: 80 x 0.5/0.2 = 200 m.

Sanity check: Units: sqrt(m x m/s²) = m/s and (m/s)²/(m/s²) = m. Friction fell by a factor 2.5, so the speed falls by sqrt(2.5) = 1.58 (20 to 12.65) and the radius rises 2.5 times (80 to 200 m), which agrees.

Example 5 (medium)

A frictionless banked road of radius 75 m is designed for a speed of 15 m/s. Find tan(theta). If the angle is later increased so that tan(theta) doubles, find the new speed at which no friction is needed. Take g = 10 m/s².

Marks-style solution of example 5
StepMarks
No friction: tan(theta) = v²/(r g) = 225/(75 x 10) = 0.3.1
New tan(theta) = 0.6, so v² = r g tan(theta) = 75 x 10 x 0.6 = 450.2
v = sqrt(450) = 21.2 m/s.1
Total: 4 marks4

Answer: tan(theta) = 0.3; new speed about 21.2 m/s

Fast method: v is proportional to sqrt(tan(theta)), so doubling tan(theta) multiplies the speed by 1.414: 15 x 1.414 = 21.2 m/s.

Sanity check: Units: m/s. The speed rises when the bank is steeper, but only by the factor 1.414, not 2. At tan(theta) = 0 the formula gives zero speed, as for a smooth flat road.

Example 6 (medium)

A road of radius 100 m is banked with tan(theta) = 0.2, and the coefficient of friction is 0.3. Find the minimum and maximum speeds at which a car can take the turn without skidding. Take g = 10 m/s².

Marks-style solution of example 6
StepMarks
Compare mu with tan(theta): 0.3 is greater than 0.2, so friction alone prevents sliding down the bank even at rest. Hence v_min = 0.2
At the fastest speed friction acts down the slope at its limit: v² = r g (tan(theta) + mu)/(1 - mu tan(theta)) = 1000 x 0.5/(1 - 0.06).2
v² = 500/0.94 = 531.9, so v_max = 23.06 m/s. Answers: v_min = 0 and v_max about 23.1 m/s.1
Total: 5 marks5

Answer: v_min = 0; v_max about 23.1 m/s

Fast method: Test mu against tan(theta) first. If mu is at least tan(theta), skip v_min and compute only v_max.

Sanity check: Without friction the ideal speed would be sqrt(1000 x 0.2) = 14.1 m/s; friction raises the upper limit to 23.1 m/s, above the ideal speed, as it must. Setting mu = 0 in the v_max formula gives back 14.1 m/s.

Typical trap: Using the v_min formula with mu greater than tan(theta). The radicand is negative, so there is no real minimum speed: the car does not slide down the bank, and v_min = 0.

Example 7 (hard, multi-step)

A road of radius 50 m is banked at an angle with tan(theta) = 0.75. The coefficient of friction between tyres and road is 0.5. Find the maximum speed at which a car can take the turn without skidding up the slope. Take g = 10 m/s².

Marks-style solution of example 7
StepMarks
At the fastest speed the car tends to slide outward and up, so friction acts down the slope at its limit mu N.1
Vertical: N cos(theta) = m g + mu N sin(theta). Radial: N sin(theta) + mu N cos(theta) = m v²/r.2
Divide: v² = r g (tan(theta) + mu)/(1 - mu tan(theta)) = 500 x 1.25/0.625 = 1000.2
v_max = sqrt(1000) = 31.6 m/s.1
Total: 6 marks6

Answer: about 31.6 m/s

Fast method: Substitute directly in v² = r g (tan(theta) + mu)/(1 - mu tan(theta)); the denominator 1 - 0.375 = 0.625 is the only slow step.

Sanity check: With mu = 0 the formula gives sqrt(r g tan(theta)) = 19.4 m/s, the ideal speed. Friction raises the limit to 31.6 m/s, so the result is above the ideal speed, as it must be.

Example 8 (hard, multi-step)

A bend of radius 200 m is to be banked so that a car at 72 km/h (20 m/s) needs no friction. (a) Find tan(theta). (b) With coefficient of friction 0.1 between tyres and road, find the minimum and maximum safe speeds. Take g = 10 m/s².

Marks-style solution of example 8
StepMarks
Ideal speed: tan(theta) = v²/(r g) = 400/(200 x 10) = 0.2, so theta = 11.3 degrees.1
Maximum speed, friction down the slope: v² = r g (tan(theta) + mu)/(1 - mu tan(theta)) = 2000 x 0.3/0.98 = 612.2, so v_max = 24.7 m/s.2
Minimum speed, friction up the slope: v² = r g (tan(theta) - mu)/(1 + mu tan(theta)) = 2000 x 0.1/1.02 = 196.1, so v_min = 14.0 m/s.2
Check that 14.0 < 20 < 24.7. Answers: tan(theta) = 0.2; safe band 14.0 m/s to 24.7 m/s.1
Total: 6 marks6

Answer: tan(theta) = 0.2; v_min about 14.0 m/s, v_max about 24.7 m/s

Fast method: Use the two formulas directly with tan(theta) = 0.2: numerators 0.3 and 0.1, denominators 0.98 and 1.02.

Sanity check: The ideal speed 20 m/s lies inside the band 14.0 to 24.7 m/s, and with mu = 0 both limits would collapse to 20 m/s. Units are m/s. The band is not symmetric about 20 because the denominators differ.

Formulas and units

Formula and unit box for Dynamics of circular motion and banking
ResultFormulaValid whenUnits or noteWorked example
Centripetal acceleration and forcea = v²/r = w² r; F = m v²/rcircular path of radius r; radial component of accelerationm/s² (N)Example 2
Angular speedw = 2 pi n = 2 pi N/60 (N in rpm)uniform rotation; w in rad/s, n in rev/s, N in rpmrad/snone
Level road, maximum speedv_max = sqrt(mu r g)level road, friction alone gives centripetal force, car not skiddingm/sExample 1
Level road, smallest radius at speed vr_min = v²/(mu g)level road, friction alone gives centripetal forcemExample 4
Banked road, no frictiontan(theta) = v²/(r g); N = m g/cos(theta)banked road with no friction, ideal speeddimensionless, NExample 3
Banked road, maximum speed with frictionv_max = sqrt(r g (tan(theta) + mu)/(1 - mu tan(theta)))banked road, friction at its limit acting down the slope, mu tan(theta) < 1m/sExample 6
Banked road, minimum speed with frictionv_min = sqrt(r g (tan(theta) - mu)/(1 + mu tan(theta))), if mu < tan(theta); else 0banked road, friction at its limit acting up the slope; zero speed if mu >= tan(theta)m/sExample 6
Scaling rulelevel: v is proportional to sqrt(mu r); bank: v₀ is proportional to sqrt(r tan(theta))banked road or level road, same turn; only for scaling comparisonsrationone

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Drawing centripetal force as an extra arrow in the free-body diagram. Why it tempts: The words appear in the question and the picture seems incomplete without an arrow pointing to the centre, but the inward direction is already covered by real forces such as friction and the normal force.
  • Using N = m g cos(theta) on a banked road. Why it tempts: It is the memorised result for a block on a fixed incline, but on a bank the radial acceleration makes N = m g/cos(theta) at the ideal speed.
  • Using the v_min banking formula when mu is greater than tan(theta). Why it tempts: The formula still gives a number if the negative radicand is ignored, but the physical answer is that the car can stand still, v_min = 0.
  • Using v_max = sqrt(mu r g) on a banked road. Why it tempts: It is the first formula learnt for turning cars, but on a bank the normal force also has a horizontal part, so the limit is larger.
  • Taking friction up the slope for the maximum speed on a bank. Why it tempts: Friction up the slope is the familiar direction for a block on an incline, but a fast car tends to slide outward and up, so friction acts down the slope.

Time per question and fast method

Target: about 110 seconds per question.

Name the radial direction first and write sum of inward forces = m v²/r in one line. Memorise two results: sqrt(mu r g) on a flat road and sqrt(r g tan(theta)) on a smooth bank. For friction on a bank use the (tan(theta) plus or minus mu) formula directly, after checking mu against tan(theta). For ratio questions use v squared proportional to mu r (level) or to r tan(theta) (bank).

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. A car turns on a level road of radius 20 m with coefficient of friction 0.5. What is the maximum speed in m/s? Take g = 10 m/s².
Show the answer

Answer: C: 10. v = sqrt(mu r g) = sqrt(0.5 x 20 x 10) = sqrt(100) = 10 m/s.

Question 2. A 0.5 kg ball moves in a horizontal circle of radius 2 m at 3 rad/s on a string. What is the tension in newtons?
Show the answer

Answer: A: 9. T = m w² r = 0.5 x 9 x 2 = 9 N.

Question 3. A road of radius 90 m is banked with tan(theta) = 1/3 and the coefficient of friction is 0.5. What is the maximum safe speed in m/s? Take g = 10 m/s².
Show the answer

Answer: B: 30. v² = r g (tan(theta) + mu)/(1 - mu tan(theta)) = 900 x (5/6)/(5/6) = 900, so v = 30 m/s.

Question 4. A frictionless road of radius 160 m is banked with tan(theta) = 0.25. What is the speed at which no friction is needed, in m/s? Take g = 10 m/s².
Show the answer

Answer: B: 20. v = sqrt(r g tan(theta)) = sqrt(160 x 10 x 0.25) = sqrt(400) = 20 m/s.

Question 5. A car moves at constant speed on a flat circular track. Which force supplies the force towards the centre?
Show the answer

Answer: A: Static friction between the tyres and the road. The road exerts a sideways static friction on the tyres, directed to the centre. Weight and normal reaction are vertical, and engine thrust is along the motion.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Centripetal force and units

For uniform circular motion on a circle of radius r with speed v, the acceleration is v²/r = w² r directed to the centre, with units m/s². The sum of the real force components along the inward radius must equal m v²/r, with units of newton. Angular speed w = 2 pi n for n revolutions per second, or w = 2 pi N/60 for N revolutions per minute, in rad/s. Centripetal force does no work because it is always perpendicular to the velocity, so it cannot change the speed. Always write the equation of motion in the road (ground) frame, with real forces only.

Flat road and the skidding limit

On a level road the only horizontal force on the car is static friction. For a turn of radius r the requirement is f = m v²/r, and f cannot exceed mu_s m g, so v_max = sqrt(mu_s r g) and the smallest safe radius at speed v is r_min = v²/(mu_s g). Mass cancels, so a lorry and a car have the same limit. If the road is wet and mu falls, the maximum speed falls as the square root of mu; at a fixed speed the radius needed rises in proportion to 1/mu. Static friction, not kinetic, is the working force while the tyres grip. Once the car skids, the friction falls to its kinetic value, which is smaller, and the car slides outward along the tangent.

Banked roads: ideal speed and the two friction limits

For a road banked at theta, the ideal speed with no friction is v₀ = sqrt(r g tan(theta)), independent of the mass of the vehicle. Driving faster than v₀ pushes the car outward, so friction acts down the slope. Driving slower makes it slide inward, so friction acts up the slope. Equations for the fastest and slowest speeds follow by resolving N and mu N along the horizontal and vertical: v_max = sqrt(r g (tan(theta) + mu)/(1 - mu tan(theta))) and v_min = sqrt(r g (tan(theta) - mu)/(1 + mu tan(theta))). If mu is at least tan(theta), then v_min = 0 (the car can stand still) and when mu tan(theta) is at least 1 there is no upper limit on the speed from friction. Check: at mu = 0 both reduce to v₀. Typical design: choose theta from v² = r g tan(theta) for a given speed and radius, and remember that the road reaction N is larger than m g, N = m g/cos(theta) at ideal speed.

Design and what changes the limiting speed

Typical design problems fix two of speed, radius and angle and ask for the third. With no friction, tan(theta) = v²/(r g); for 20 m/s on a bend of radius 200 m, tan(theta) = 0.2, about 11.3 degrees. Friction then gives a safe band around the ideal speed: for mu = 0.1 the band is 14.0 m/s to 24.7 m/s. Scaling rules: on a level road v_max is proportional to sqrt(mu r); on a bank the ideal speed is proportional to sqrt(r tan(theta)); doubling tan(theta) multiplies the ideal speed by sqrt(2). The vertical reaction on a bank at the ideal speed is N = m g/cos(theta), larger than m g, so the tyres are pressed harder than on a level road.

Banked road with friction: direction of friction and special cases

Above the ideal speed the car tends to slide up and outward, so friction acts down the slope; below it the car tends to slide down and inward, so friction acts up the slope. At the ideal speed friction is zero. Write N cos(theta) = m g plus or minus mu N sin(theta) for the vertical balance and N sin(theta) plus or minus mu N cos(theta) = m v²/r for the radial equation, with the upper sign for v_max. If mu tan(theta) is at least 1, friction alone can hold any speed, so there is no upper limit. If mu is at least tan(theta), the car does not slide down even at rest, so v_min = 0. Check every answer against mu = 0, which must give the ideal speed, and against theta = 0, which must give the level-road result.

What examiners test, and edge cases

Typical questions: maximum speed on a level curve; smallest radius for a given speed and mu; banking angle for given speed and radius; the minimum and maximum speeds on a bank with friction; the change in the safe speed when the road becomes wet or the angle is changed; the normal force on a banked road; tension for a body whirled on a string in a horizontal plane as a direct case of centripetal force. Edge cases: banking and friction both present; a car slower than the ideal speed; mu greater than tan(theta). Integer-answer items often use tan(theta) = 3/4 or 1/3 so that the denominator 1 - mu tan(theta) is simple. Always check units (m/s, rad/s, N), the direction of friction, and the limiting cases mu = 0 and theta = 0.

Memory hook

Suppose you sit in an auto-rickshaw that takes a left turn at a crossing on a flat road, first slowly and then faster on the same turn.

  1. At a slow speed the road needs to push the tyres only gently sideways to bend the path of the auto.
  2. At a higher speed on the same turn, the sideways push needed is much larger, because it grows with the square of the speed.
  3. On a tighter turn the same speed needs a bigger sideways push, since the path must bend more sharply.
  4. If the road is wet, the sideways grip is smaller, and beyond a certain speed the tyres can no longer give the push needed, so the auto slides outwards. A flyover curve that is tilted inward lets the road push partly sideways even without grip.

The sideways push needed is m v²/r: it grows with the square of the speed and falls as the radius grows. On a level road only friction can give it; on a banked road the normal force gives part of it.

The turn needs m v²/r towards the centre: faster or tighter means a bigger push.

Revision card

Try to answer each without looking above.

  1. Write the centripetal force in terms of v and r, and in terms of w and r.
  2. Derive the maximum speed on a level road and say why mass does not appear.
  3. Derive tan(theta) = v²/(r g) for a banked road and state what friction does above and below this speed.
  4. Write v_max and v_min for a banked road with friction, and say when v_min is zero.
  5. How does the maximum speed on a level road change when mu falls to a quarter?
  6. What is the normal force on a banked road at the ideal speed, and is it more or less than m g?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (see content/reviews/scope-audit-2026-11-20.md)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 1; fixed: 1
  • Report: content/reviews/learn2-lom-2026-11-20.md

Textbook references

  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 4: Laws of Motion, 4.10 CIRCULAR MOTION (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 4: Laws of Motion, Example 4.11 Example 4.11 (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 3 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
  • NCERT Class 11 Physics, Laws of Motion, circular motion section (read as a reference for scope; content written fresh)

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.