Uniform Circular Motion: JEE Main Notes and Solutions
Reviewed Last updated 2026-11-20. Syllabus topic: Uniform circular motion.
In short. In uniform circular motion a body moves on a circle of radius r at constant speed v. Its velocity keeps changing direction, so it has an acceleration v²/r = omega² r directed towards the centre; the speed is v = omega r and the period is T = 2 pi r/v.
- Angular velocity omega = 2 pi/T = 2 pi f, in rad/s; v = omega r links linear and angular speed.
- Centripetal acceleration a_c = v²/r = omega² r points towards the centre and is perpendicular to the velocity.
- Constant speed does not mean constant velocity or zero acceleration.
- The velocity is always along the tangent; a body released at any instant moves off along that tangent, not along the radius.
- Convert rpm and km/h to SI units first: 1 rpm = 2 pi/60 rad/s and 36 km/h = 10 m/s.
Syllabus line: Kinematics The frame of reference, motion in a straight line, speed and velocity, uniform and non-uniform motion, average speed and instantaneous velocity, uniformly accelerated motion, velocity-time, position-time graph, relations for uniformly accelerated motion, relative velocity. Motion in a plane, projectile motion, uniform circular motion. (NTA JEE (Main) 2026 syllabus, Physics, Unit 2 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Frames of reference and vectors in motion: Vector subtraction and change of velocity. Read this first if Delta v for a turning body is unclear.
- Motion in a straight line: Speed, distance and time relations used for arc length and period.
Related topics
- Frames of reference and vectors in motion
- Projectile motion
- Laws of Motion (lesson planned)
The concept step by step
Step 1: Describing a point on a circle
A point on a circle of radius r can be located by the angle theta it has turned through, measured in radians. The arc length is s = r theta. If the body keeps turning at the same rate, its angular velocity omega = theta/t is constant, in rad/s. One full turn is 2 pi radians, so the period is T = 2 pi/omega and the frequency is f = 1/T.
Step 2: Linear speed and angular speed
In one period the body covers the circumference 2 pi r, so the speed is v = 2 pi r/T = omega r. A fan blade tip at r = 0.5 m turning at 120 rpm has omega = 120 x 2 pi/60 = 12.57 rad/s and v = 6.28 m/s. Points farther from the centre have the same omega but a larger v. Always convert rpm to rad/s first.
Step 3: Velocity changes even at constant speed
The velocity is tangent to the circle, so as the body moves round its direction changes continuously. A changing direction means a changing velocity vector, so there is an acceleration. For a quarter turn at speed v, the velocity turns from east to north: Delta v = v(north) - v(east), whose size is v sqrt(2). Speed alone says nothing about acceleration.
Step 4: Magnitude and direction of the acceleration
For a small turn through angle d theta the velocity vector changes by v d theta, perpendicular to v and pointing inward. Dividing by dt and using d theta = omega dt gives a = v omega = v²/r = omega² r. The direction is along the radius towards the centre, hence "centripetal". It is perpendicular to the velocity, so it changes direction but not speed. For r = 2 m and v = 4 m/s, a = 16/2 = 8 m/s².
Step 5: Average acceleration over part of a turn
The instantaneous acceleration has constant size v²/r, but its direction rotates. The average acceleration over a quarter turn is Delta v divided by time, which is smaller than v²/r. With r = 2 m and v = 4 m/s the period is pi s, the quarter turn takes 0.785 s, Delta v = 4 sqrt(2) = 5.66 m/s, so average acceleration is 7.20 m/s², while the instantaneous value is 8 m/s².
Step 6: Meeting problems and everyday conversions (applications)
Two bodies on one circle meet when the angle by which one gains on the other is a full 2 pi (same direction, same start) or the sum of angles is 2 pi (opposite directions). Use relative angular velocity. With periods 6 s and 12 s and a start diametrically apart in the same direction, the faster gains pi radians at pi/6 rad/s, so they meet after 6 s. Convert km/h to m/s by dividing by 3.6.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
A particle moves on a circle of radius 0.5 m at 120 revolutions per minute. Find its centripetal acceleration.
| Step | Marks |
|---|---|
| Convert: omega = 120 x 2 pi/60 = 4 pi = 12.57 rad/s. | 1 |
| a = omega² r = (12.57)² x 0.5 = 157.9 x 0.5. | 1 |
| Centripetal acceleration = 79.0 m/s² (speed v = 6.28 m/s). | 1 |
| Total: 3 marks | 3 |
Answer: 79.0 m/s²
Fast method: omega = 4 pi, so omega² = 16 pi² = 157.9; half of that is 79.0.
Sanity check: Units: (rad/s)² x m = m/s². Cross-check: v²/r = (6.28)²/0.5 = 78.9 m/s². Matches.
Example 2 (easy)
A wheel turns at 300 revolutions per minute. Find its frequency, period and angular velocity.
| Step | Marks |
|---|---|
| f = 300/60 = 5 Hz. | 1 |
| T = 1/f = 0.2 s. | 1 |
| omega = 2 pi f = 31.4 rad/s. | 1 |
| Total: 3 marks | 3 |
Answer: f = 5 Hz, T = 0.2 s, omega = 31.4 rad/s
Fast method: rpm divided by 60 gives hertz; multiply by 2 pi for rad/s.
Sanity check: omega T = 31.4 x 0.2 = 6.28 = 2 pi, as required for one full turn per period.
Example 3 (medium)
The minute hand of a wall clock is 0.1 m long. Find the speed of its tip in m/s.
| Step | Marks |
|---|---|
| The hand turns once in 3600 s, so omega = 2 pi/3600 = 1.745 x 10⁻3 rad/s. | 1 |
| v = omega r = 1.745 x 10⁻3 x 0.1. | 1 |
| Speed of the tip = 1.745 x 10⁻4 m/s, about 0.17 mm/s. | 1 |
| Total: 3 marks | 3 |
Answer: 1.75 x 10⁻4 m/s
Fast method: Distance 2 pi r = 0.628 m in 3600 s.
Sanity check: The tip moves a bit under a millimetre per five seconds, which matches how slow a minute hand looks. Units: rad/s x m = m/s.
Example 4 (medium)
A particle moves at 4 m/s on a circle of radius 2 m. Find its average acceleration over a quarter of a revolution and compare it with the instantaneous centripetal acceleration.
| Step | Marks |
|---|---|
| Quarter turn: velocity turns by 90 degrees, so |Delta v| = v sqrt(2) = 5.66 m/s. | 2 |
| Period T = 2 pi r/v = pi s; the quarter turn takes pi/4 = 0.785 s. | 1 |
| Average acceleration = 5.66/0.785 = 7.20 m/s², less than the instantaneous v²/r = 8 m/s². | 2 |
| Total: 5 marks | 5 |
Answer: 7.20 m/s² (instantaneous value 8 m/s²)
Fast method: Average acceleration over a quarter turn = Delta v/(T/4) = 4 sqrt(2) v/T = 2 sqrt(2) v²/(pi r).
Sanity check: The average is the vector sum over a changing direction, so it must be smaller than the constant size 8 m/s²: ratio 7.20/8 = 0.90 = 2 sqrt(2)/pi. Matches.
Example 5 (medium)
A car travels at 36 km/h round a circular bend of radius 50 m. Find the magnitude of its acceleration.
| Step | Marks |
|---|---|
| Convert: 36 km/h = 36/3.6 = 10 m/s. | 1 |
| a = v²/r = 100/50. | 1 |
| Acceleration = 2 m/s² towards the centre. | 1 |
| Total: 3 marks | 3 |
Answer: 2 m/s²
Fast method: 36 km/h is 10 m/s: v²/r = 100/50.
Sanity check: Units: (m/s)² / m = m/s². An acceleration of 2 m/s² is a fifth of g, plausible for a gentle bend.
Example 6 (hard, multi-step)
A particle moves in uniform circular motion on a circle of radius 0.4 m at 150 revolutions per minute. Find its speed, its centripetal acceleration and the magnitude of its average velocity while it turns through 60 degrees.
| Step | Marks |
|---|---|
| Convert: omega = 150 x 2 pi/60 = 5 pi = 15.71 rad/s. | 1 |
| Speed v = omega r = 15.71 x 0.4 = 6.28 m/s. | 1 |
| Centripetal acceleration a_c = omega² r = 246.7 x 0.4 = 98.7 m/s². | 1 |
| Time for 60 degrees = (pi/3)/omega = 1.047/15.71 = 0.0667 s. | 1 |
| Chord for 60 degrees = 2 r sin(30 degrees) = 0.4 m, so average velocity = 0.4/0.0667 = 6.0 m/s. | 2 |
| Speed 6.28 m/s, centripetal acceleration 98.7 m/s², average velocity 6.0 m/s. | 1 |
| Total: 7 marks | 7 |
Answer: 6.28 m/s; 98.7 m/s²; 6.0 m/s
Fast method: 150 rpm = 2.5 rev/s, so T = 0.4 s, v = 2 pi r/T = 6.28 m/s. A 60 degree turn takes T/6 = 0.0667 s and the chord equals the radius for 60 degrees.
Sanity check: Speed 6.28 m/s with radius 0.4 m gives v²/r = 98.7 m/s², matching omega² r. The chord (0.4 m) is shorter than the arc (0.419 m), so the average velocity must be below the speed.
Example 7 (hard)
Two particles move on the same circle in the same sense. A has period 6 s and B has period 12 s, and at t = 0 they are at diametrically opposite points with A behind. Find when A first catches up with B.
| Step | Marks |
|---|---|
| omega_A = 2 pi/6 = pi/3 rad/s, omega_B = 2 pi/12 = pi/6 rad/s. | 1 |
| Relative angular velocity = pi/3 - pi/6 = pi/6 rad/s. | 1 |
| A must gain half a turn, pi radians: t = pi/(pi/6) = 6 s. | 2 |
| Total: 4 marks | 4 |
Answer: 6 s
Fast method: The gap is half a turn and the relative rate is 1/6 - 1/12 = 1/12 turn per second, so the time is (1/2)/(1/12) = 6 s.
Sanity check: At 6 s A has turned one full circle and B half a circle, so both are at the starting point of A. If they moved in opposite senses from the same point, they would meet after 4 s, a smaller time as expected.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Angular velocity | omega = d theta/dt = 2 pi/T = 2 pi f | dtheta/dt always; 2 pi/T and 2 pi f hold for uniform circular motion | rad/s | Example 1 |
| Linear and angular speed | v = omega r | circular motion, omega in rad/s | m/s | Example 1 |
| Period and frequency | T = 2 pi r/v = 1/f | uniform circular motion, constant speed v | s (Hz) | Example 2 |
| Centripetal acceleration | a_c = v²/r = omega² r = v omega | uniform circular motion; v, omega in SI units | m/s² | Example 1 |
| Arc and chord | arc = r theta; chord = 2 r sin(theta/2) | theta in radians, r the circle radius | m | Example 6 |
| Unit conversions | 1 rpm = 2 pi/60 rad/s; 1 km/h = 1/3.6 m/s | not applicable | rad/s (m/s) | Example 1 |
Common mistakes and speed
- Using rpm or km/h directly in v = omega r or v²/r. Why it tempts: The numbers appear in the stem and the formulas look unit-free, but omega must be in rad/s and v in m/s.
- Saying acceleration is zero in uniform circular motion because speed is constant. Why it tempts: Speed is mentioned as constant, so students forget that velocity is a vector whose direction changes.
- Drawing the acceleration along the tangent or outward. Why it tempts: The outward push felt in a turning vehicle is an apparent effect of the frame; the body's own acceleration is always directed to the centre, never along the tangent.
- Taking the velocity along the radius, or saying a released body flies off outward. Why it tempts: Thinking of a stone whirled on a string, one expects it to fly radially away when released; but at release its velocity is along the tangent, so it leaves along the tangent.
- Taking the average acceleration over a part of a turn as v²/r. Why it tempts: The magnitude of the instantaneous value is constant, so it is tempting to assume the average equals it; but the direction rotates.
Time per question and fast method
Target: about 75 seconds per question.
Convert units first (rpm to rad/s, km/h to m/s). Use v²/r when speed is given and omega² r when rpm or period is given. For ratios use proportion: at equal omega, v and a go with r; at equal v, a goes with 1/r. For meeting problems use relative angular velocity and the angle to be gained.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 5 correct. Pick an option for each question.
Practice
- The second hand of a wall clock is 0.20 m long and moves at constant angular speed. Taking pi = 3.14, the… Verified (T1)
- A disc of radius 0.30 m rotates uniformly at 300 revolutions per minute. Taking pi = 3.14, the magnitude of… Verified (T1)
- The hour hand and the minute hand of a correct clock point in the same direction at 00:00. Counting the… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Definitions, units and the vector nature of omega
Angle in radians is dimensionless, so omega has units rad/s which are s⁻1. The conversion 1 rpm = 2 pi/60 rad/s is used constantly. Frequency f is in hertz and T in seconds. JEE Main uses angular velocity mainly through its magnitude and sense (clockwise or anticlockwise); its direction along the axis is given by the right-hand rule, which is rarely needed here. The relation v = omega r holds at an instant for any circular motion, uniform or not. All points of a rigid rotating body share the same omega; their speeds differ with r. The time period of a uniform circular motion is T = 2 pi r/v, so doubling the radius at the same speed doubles T.
Centripetal acceleration: derivation and meaning
Take two velocity vectors of equal size v separated by a small angle d theta. Their difference has size v d theta and points to the centre in the limit. So a = v d theta/dt = v omega. Since v = omega r, a = omega² r = v²/r. The word centripetal names a direction, not a new kind of force or acceleration: it is the radial component of the acceleration whatever supplies it. The tangential acceleration is zero for uniform motion. Both v²/r and omega² r are useful: use v²/r when speed is given and omega² r when rpm or period is given. Scaling: at fixed v, a falls as 1/r; at fixed omega, a rises with r.
Average versus instantaneous, and displacement over arcs
Over a turn of angle theta at speed v, the displacement is the chord 2 r sin(theta/2), while the distance is the arc r theta. Average velocity is chord divided by time and average speed is arc divided by time. Over a full turn the average velocity and the average acceleration are both zero, while the average speed is v. Over half a turn the change in velocity is 2v, so the average acceleration is 2v/(T/2) = 4v/T = 2v²/(pi r), compared with v²/r instantaneous. A frequent examiner idea is to ask for the average acceleration or the change in velocity over a fixed fraction of the period.
What examiners test and edge cases
Typical items: omega, v or a from rpm, T or r; ratios for two bodies (same omega, different r; same v, different r); the angle turned in given time; a clock hand and its tip speed; change in velocity over a part of a turn; and meeting of two bodies on a circle. Edge cases: the centripetal force does no work because it is perpendicular to the velocity, so the speed stays constant; a body released at an instant moves along the tangent, not along the radius; constant speed with changing direction is accelerated; and units: using rpm directly in v = omega r gives a wrong answer by a factor 2 pi/60.
Memory hook
Suppose you are standing at the rim of a merry-go-round at a village fair that turns once every few seconds, while a friend stands close to the centre.
- Both of you complete each turn in the same time, so you turn through the same angle every second.
- But you are far from the centre and cover a much longer circle in that time, so your speed is larger. That is v = omega r.
- You feel as if you are pushed outward and you must hold the rail (this feeling is only apparent, because your body tends to go straight on while the platform turns); the rail keeps changing the direction of your velocity inward. The farther out you stand, the harder it is to hold on, since the inward acceleration omega² r grows with r.
Same turning rate, larger radius gives larger speed and larger inward acceleration: v = omega r and a = omega² r.
Same omega for everyone on the disc; speed and inward pull grow with radius.
Revision card
Try to answer each without looking above.
- Write the relations between omega, T, f and v for circular motion.
- State the formula and direction of centripetal acceleration and give its two equivalent forms.
- Why is a body in uniform circular motion accelerated even though its speed is constant?
- In which direction is the velocity at any instant, and where does a body go if it is released from the circle?
- How do you convert rpm and km/h to SI units?
- How do you find when two bodies on a circle meet, in the same and in opposite senses?
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (see content/reviews/scope-audit-2026-11-20.md)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 4; fixed: 4
- Report: content/reviews/learn2-kin-2026-11-20.md
Textbook references
- NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 3: Motion in a Plane, Summary SUMMARY (read 2026-11-22)
- NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 3: Motion in a Plane, 3.10 UNIFORM CIRCULAR MOTION (read 2026-11-22)
- NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 3: Motion in a Plane, Points to ponder POINTS TO PONDER (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 2 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
- NCERT Class 11 Physics, Motion in a Plane (read as a reference for scope, content written fresh)
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.