Work, Kinetic Energy and Power: JEE Main Notes
Reviewed Last updated 2026-11-20. Syllabus topic: Work, kinetic energy and power.
In short. Work is force along the displacement times the displacement, and it can be negative. Net work on a body equals its change in kinetic energy, K = 0.5 m v². Power is the rate of doing work, P = F v cos(angle), in watts.
- Constant force: W = F d cos(theta) = F.d, a scalar in joules; it is negative when the force opposes the displacement and zero when the force is perpendicular to it.
- Variable force: W = integral of F dx, the signed area under the F-x graph; area below the axis counts as negative work.
- Work-energy theorem: W_net (all forces together, including friction) = change in kinetic energy, valid in an inertial frame.
- Kinetic energy K = 0.5 m v² = p²/(2m) is never negative, and doubling the speed multiplies it by four.
- Power: P_avg = W/t and P = F.v; at constant power the driving force is P/v and the top speed is P/f when resistance is f.
Syllabus line: Work, Energy and Power Work done by a constant force and a variable force, kinetic and potential energies, work-energy theorem, power. The potential energy of a spring, conservation of mechanical energy, conservative and non- conservative forces, motion in a vertical circle. Elastic and inelastic collisions in one and two dimensions. (NTA JEE (Main) 2026 syllabus, Physics, Unit 4 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Newton's laws and free-body diagrams: Work is done by each force on the free-body diagram. Read this first if you cannot list the forces on a body.
- Motion in a straight line: Kinematic results such as v² = u² + 2as are the cross-check for every work-energy answer. Read this first if they are not automatic.
- Definite integrals and properties: Work by a variable force is a definite integral. Read this first if integrating xⁿ between limits is slow.
Related topics
The concept step by step
What work means in physics
A force does work only when the body moves and the force has a component along the movement. A porter standing still with a load on the head does no work on the load, even though he is tired. For a constant force the work is the force component along the displacement times the displacement, W = F d cos(theta), measured in joules (1 J = 1 N m).
Work can be positive, negative or zero
The sign of cos(theta) decides the sign of the work. If theta is below 90 degrees the force helps the motion and the work is positive. If theta is above 90 degrees the force opposes it and the work is negative, as for friction or for gravity on a rising ball. If theta is exactly 90 degrees, as for the normal force on a block sliding on a table, the work is zero.
Work by a force that changes with position
When F changes with x, split the path into tiny steps, each with an almost constant force F dx, and add them up: W = integral of F dx. On an F-x graph this is the area between the curve and the x axis. Area above the axis is positive work and area below is negative work. Always add the signed areas, never the plain areas.
Kinetic energy and the work-energy theorem
Multiply F = m a by a small displacement and use v dv = a dx. Adding up gives W_net = 0.5 m v² - 0.5 m u². The quantity K = 0.5 m v² is the kinetic energy. The theorem uses the net work of all forces, including friction, and it gives speeds without any need to know the time taken. Example: 2 kg going from 3 m/s to 5 m/s needs 0.5 x 2 x (25 - 9) = 16 J.
Power: how fast the work is done
Average power is the work divided by the time, P = W/t, in watts (1 W = 1 J/s). The power at one instant is P = dW/dt = F.v = F v cos(theta). For a vehicle on a level road at constant power P with resistance f, the driving force is P/v. It falls as the speed rises, so the acceleration (P/v - f)/m falls to zero at the top speed v_max = P/f.
A quick routine for exam questions
Choose the two positions between which the motion is described. List every force and write the work of each with its sign, using areas for variable forces. Set the sum equal to the change in kinetic energy. Use this routine whenever the question asks for a speed after a given displacement and no time is involved. Use P = F v when time or speed enters through power.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
A constant force of 20 N acts on a body at 60 degrees to its displacement. The body moves 3 m. Find the work done by the force.
| Step | Marks |
|---|---|
| Work = F d cos(theta) with theta = 60 degrees. | 1 |
| W = 20 x 3 x 0.5. | 1 |
| W = 30 J. | 1 |
| Total: 3 marks | 3 |
Answer: 30 J
Fast method: Component of force along the motion is 10 N, times 3 m.
Sanity check: Units: N x m = J. Limiting cases: theta = 0 would give 60 J and theta = 90 degrees would give 0, and 30 J lies between them.
Example 2 (easy)
A 2 kg book is lifted slowly through 1.5 m. Find the work done by gravity and by the hand. Take g = 10 m/s².
| Step | Marks |
|---|---|
| Gravity acts downward and the displacement is upward, so theta = 180 degrees and the work is negative: W_g = -m g h. | 1 |
| W_g = -2 x 10 x 1.5 = -30 J. | 1 |
| Lifted slowly means no change in kinetic energy, so W_hand + W_g = 0 and W_hand = +30 J. | 1 |
| Total: 3 marks | 3 |
Answer: gravity -30 J, hand +30 J
Fast method: W = m g h = 30 J with the sign by direction.
Sanity check: Net work is zero, matching zero change in kinetic energy. 30 J is of the order of the weight 20 N times 1.5 m, as it must be.
Example 3 (medium)
A car of mass 1000 kg speeds up from 10 m/s to 20 m/s. Find the net work done on it. A student says it is 0.5 x 1000 x (20 - 10)². Is that right?
| Step | Marks |
|---|---|
| By the work-energy theorem W = 0.5 m (v² - u²), not 0.5 m (v - u)². | 1 |
| W = 0.5 x 1000 x (400 - 100) = 0.5 x 1000 x 300. | 1 |
| W = 150000 J = 150 kJ. The student value is 50 kJ, which is wrong. | 1 |
| Total: 3 marks | 3 |
Answer: 150000 J (150 kJ)
Fast method: Difference of squares: 0.5 x 1000 x 300 = 150000 J.
Sanity check: The work to go from 0 to 10 m/s is 50 kJ, and 0 to 20 m/s is 200 kJ, so the step from 10 to 20 m/s takes 150 kJ, three times the first step.
Example 4 (medium)
A force F = 12 - 3x (F in N, x in m) acts on a body that moves from x = 0 to x = 6 m. Find the work done.
| Step | Marks |
|---|---|
| The force is zero at x = 4 m, so it reverses direction beyond this point. | 1 |
| Work from 0 to 4 m: area of the triangle = 0.5 x 4 x 12 = 24 J. From 4 to 6 m the force is negative and the area is 0.5 x 2 x 6 = 6 J, counted as -6 J. | 2 |
| Net work W = 24 - 6 = 18 J. | 1 |
| Total: 4 marks | 4 |
Answer: 18 J
Fast method: Integral of (12 - 3x) = 12x - 1.5 x² = 72 - 54 = 18 J.
Sanity check: The positive area dominates, so the net work is positive and below the 24 J of the first stretch. Adding plain areas would give 30 J, which is wrong because the force opposes the motion after 4 m.
Example 5 (hard, multi-step)
A motor lifts a 100 kg load from rest with a constant upward acceleration of 2 m/s² for 5 s. Find the power the motor delivers at the end of the 5 s and the average power over the 5 s. Take g = 10 m/s².
| Step | Marks |
|---|---|
| Rope pull: F - m g = m a, so F = 100 x (10 + 2) = 1200 N. | 1 |
| Speed at 5 s: v = a t = 10 m/s. Height reached: 0.5 x 2 x 25 = 25 m. | 1 |
| Instantaneous power at 5 s: P = F v = 1200 x 10 = 12000 W. | 2 |
| Average power = work/time = 1200 x 25/5 = 6000 W, half of the final value because the speed grew linearly from zero. Final answer: 12 kW at 5 s and 6 kW on average. | 2 |
| Total: 6 marks | 6 |
Answer: 12000 W at 5 s; 6000 W average
Fast method: F = m(g + a) = 1200 N; P_final = F a t = 12000 W; P_avg = 0.5 P_final.
Sanity check: The average of a linearly rising power from 0 to 12 kW is 6 kW, which matches the work 30000 J over 5 s. Units W = N x m/s.
Example 6 (hard, multi-step)
A 2 kg block at rest on a rough horizontal floor (kinetic friction coefficient 0.2) is pushed by a force F = 12 - 2x (F in N, x in m) along the floor. Find its speed after it has moved 4 m. Take g = 10 m/s².
| Step | Marks |
|---|---|
| Work by the push from 0 to 4 m: integral of (12 - 2x) dx = 48 - 16 = 32 J. | 2 |
| Friction is constant: f = 0.2 x 2 x 10 = 4 N, so its work is -4 x 4 = -16 J. The normal force and weight do no work. | 2 |
| Work-energy: 32 - 16 = 0.5 x 2 x v², so v² = 16. | 1 |
| v = 4 m/s. | 1 |
| Total: 6 marks | 6 |
Answer: 4 m/s
Fast method: Net work 16 J equals 0.5 m v² = v² for m = 2 kg, so v = 4 m/s.
Sanity check: Check the force stays positive: at x = 4 m the push is 4 N, equal to friction, so the speed is still rising up to this point, consistent with a positive net force throughout. The units are J = kg (m/s)².
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Work, constant force | W = F d cos(theta) = F.d | constant force, straight-line displacement; theta is angle between F and d | J (N m) | Example 1 |
| Work, variable force on a line | W = integral of F dx = area under F-x graph (signed) | force varying along a straight line; areas below the axis count negative | J | Example 4 |
| Kinetic energy | K = 0.5 m v² = p²/(2m) | speed much less than light speed; translational kinetic energy of a particle | J | Example 3 |
| Work-energy theorem | W_net = 0.5 m v² - 0.5 m u² | W_net is the work of all forces on a particle, speeds much below light speed | J | Example 3 |
| Average power | P_avg = W/t | average over the time interval t in which work W is done | W (J/s) | Example 5 |
| Instantaneous power | P = F.v = F v cos(theta) | at one instant; theta is angle between force and velocity | W | Example 5 |
| Top speed at constant power | v_max = P/f (f = constant resistance) | engine power constant and resistance constant; net force zero at top speed | m/s | none |
| Energy unit conversion | 1 kW h = 3.6 x 10⁶ J | not applicable | J | none |
| Lifting at constant speed | W_hand = m g h; W_gravity = -m g h | lifting at constant speed (slowly); g constant, h is the height gained | J | Example 2 |
Common mistakes and speed
- Writing W = F d without the cos(theta), or with the angle measured from the wrong axis. Why it tempts: The simple formula is the first one learnt, and an option equal to F d is usually present; with an inclined pull the angle is easily taken against the vertical.
- Adding the area below the F-x axis as positive work. Why it tempts: Area feels positive, so the total of plain areas looks correct, but the force opposes the motion there and the work is negative.
- Using 0.5 m (v - u)² instead of 0.5 m (v² - u²). Why it tempts: The change in speed seems the natural quantity, yet kinetic energy is quadratic in speed, so equal speed steps take unequal work.
- Leaving out friction or the initial kinetic energy in the work-energy equation. Why it tempts: The question names the pushing force prominently, and the option that ignores friction is exactly what the unwary answer gives.
- Taking power as force x average speed in a constant-power problem, or forgetting resistance. Why it tempts: P = F v looks symmetrical, but at constant power the driving force P/v changes with speed and the net force is P/v - f.
Time per question and fast method
Target: about 90 seconds per question.
Name the two positions, add signed works (areas for variable forces), and equate to the change in kinetic energy in one line; use P = F v for power and for top speed set F = resistance, so v_max = P/f. Estimate the answer by a limiting case such as theta = 0 before checking the options.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 5 correct. Pick an option for each question.
Practice
- A constant force of 10 N acts on a body at 60 degrees above the horizontal while the body is displaced 5 m… Verified (T1)
- A particle moves along the x axis under a force F = 3x² - 2x, where F is in newtons and x is in metres. The… Verified (T1)
- A force acts along the x axis on a 2 kg block. As the block moves, the force rises uniformly from 0 N at x =… Verified (T1)
- A car of mass 1000 kg moves on a level road with its engine delivering a constant power of 30 kW. The… Verified (T1)
- A block of mass 2 kg is released from rest at the top of a fixed rough incline of length 10 m and height 6 m.… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Work by a constant force: sign, units and special cases
W = F.d = F d cos(theta) is a scalar. Its unit is the joule, 1 J = 1 N m, and its dimensions are M L² T⁻2, the same as energy. Work is positive for theta 90 degrees and zero for 90 degrees. Zero work with a non-zero force happens for a normal force on a surface at rest, for the tension on a body moving in a circle on a string, and for any force perpendicular to the velocity. Work by gravity on a body that rises by h is -m g h, whatever the path. When a hand lifts a body at constant velocity, the hand does +m g h and gravity does -m g h, so the net work is zero and the kinetic energy does not change. The work by a force depends on the frame only through the displacement it is measured with, so state the frame when a trolley or lift is involved.
Work by a variable force and the graph method
For a force along one line, W = integral of F(x) dx from x1 to x2. For a vector force in a plane, W = integral of F.dr. On an F-x graph the work is the signed area. For a straight-line segment use the trapezium or triangle formula, with area below the axis negative. If the force is given as a function of time or velocity, you cannot integrate F dx until you know x as a function of that variable, and a force given against time is not an F-x graph. A frequent slip is to add the magnitudes of areas on both sides of the axis: for F = 12 - 3x between 0 and 6 m the net work is +24 - 6 = 18 J, not 30 J. Another is to forget the initial kinetic energy when asked for the final value, since the theorem gives only the change.
Kinetic energy, momentum and the work-energy theorem
K = 0.5 m v² = p²/(2m), so for equal momentum the lighter body has the larger kinetic energy and for equal kinetic energy the heavier body has the larger momentum. K is a scalar, never negative, and is not conserved in a general collision. The work-energy theorem, W_net = K_final - K_initial, holds for any combination of forces and any path in an inertial frame, so it also handles friction and drag, which is why it is the first tool for questions with non-conservative forces. It involves only the initial and final states, so it cannot give the time. If a force does work on one part of a system only, count the work on that body, not on the system, unless the question defines the system. Check units: kg x (m/s)² equals J.
Power: average, instantaneous and constant-power motion
P_avg = total work/time and the instantaneous power is P = F.v, which can be negative when the force opposes the velocity, as for friction or for gravity on a rising body. The SI unit is the watt, 1 W = 1 J/s, and 1 kW h = 3.6 x 10⁶ J because 1000 W x 3600 s = 3.6 x 10⁶ J. A kilowatt-hour is therefore a unit of energy, not of power. For a machine delivering constant power P, F = P/v, the acceleration falls as v rises, and the top speed on a level road is v_max = P/f when f is a constant resistance. For a body lifted from rest with constant acceleration a the force is m(g + a), the speed grows as a t, and the power grows linearly with time: the instantaneous power at the end is twice the average power over the interval. Efficiency problems use output power = efficiency x input power.
What examiners test and the usual traps
Expect: the angle in W = F d cos(theta) hidden in an inclined pull; the sign of the work by friction, gravity and tension; variable force from an F-x graph with a part below the axis; work-energy for a block on a rough incline; speed or stopping distance from kinetic energy, where stopping distance is proportional to u²; power as F v with resistance, including top speed; and a changed mass or speed ratio, such as the ratio of work to take a body from 0 to v and from v to 2v, which is 1 : 3. The quick checks are the units (joule, watt), the limiting case (zero angle gives F d, 90 degrees gives zero) and the sign of the final kinetic energy, which can never come out negative. Expected time is about 60 to 120 seconds per question.
Memory hook
Suppose you are pushing a loaded handcart along a market lane, and you first push along the lane, then press down on the handle while the cart keeps rolling.
- When you push along the lane, your force and the cart move together, so your work on the cart is positive and the cart picks up speed.
- When you press straight down on the handle, the force is at a right angle to the motion, so that push adds no speed however hard you press.
- When a friend leans against the front of the cart to slow it, the force opposes the movement, so that work is negative and the cart loses speed.
- Pushing the same cart twice as fast with the same force needs twice the power, because every second the force acts over twice the distance.
Only the part of the force along the movement does work, the net work changes the speed, and power is that work per second, F times v.
Along the motion adds speed, across it adds nothing, against it takes speed away: W = F d cos(theta).
Revision card
Try to answer each without looking above.
- Write W = F d cos(theta) and say when the work is positive, negative and zero.
- How do you find the work of a variable force from an F-x graph, and how is area below the axis treated?
- State the work-energy theorem and say which forces are included in the net work.
- Write kinetic energy in terms of speed and in terms of momentum.
- Give P = F.v and the top speed of a vehicle at constant power against a constant resistance.
- Why is the work from v to 2v three times the work from 0 to v?
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (see content/reviews/scope-audit-2026-11-20.md)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 0; fixed: 0
- Report: content/reviews/learn2-wep-2026-11-20.md
Textbook references
- NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 5: Work, Energy and Power, 5.3 WORK (read 2026-11-22)
- NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 5: Work, Energy and Power, 5.2 NOTIONS OF WORK AND KINETIC ENERGY: THE WORK-ENERGY THEOREM (read 2026-11-22)
- NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 5: Work, Energy and Power, 5.10 POWER (read 2026-11-22)
- NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 5: Work, Energy and Power, 5.5 WORK DONE BY A VARIABLE FORCE (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 4 (https://jeemain.nta.nic.in/document/syllabus-2026/), read from syllabus/lines/jee-main/2026.json
- Standard results are derived in the notes and every number is recomputed by code; no textbook section was opened for this page, so section references are pending
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.