EngineeringRise

Collisions in One and Two Dimensions: JEE Main Notes

Reviewed Last updated 2026-11-20. Syllabus topic: Collisions in one and two dimensions.

In short. In a collision the total momentum stays the same, along each direction separately. Kinetic energy also stays the same only if the collision is elastic. A perfectly inelastic collision loses the most kinetic energy: the bodies move together.

  • Momentum of the colliding system is conserved in all collisions, because the forces between the bodies are equal and opposite and the collision is brief; it is conserved component by component in two dimensions.
  • Elastic: kinetic energy is conserved and the speed of separation equals the speed of approach along the line of impact; inelastic: kinetic energy decreases.
  • Perfectly inelastic: the bodies move with a common velocity v = (m1 u1 + m2 u2)/(m1 + m2); the energy lost is 0.5 x m1 m2/(m1 + m2) x (u1 - u2)².
  • Equal masses in a head-on elastic collision exchange velocities; if one is initially at rest and the collision is elastic but not head-on, equal masses move off at 90 degrees to each other.
  • Never conserve kinetic energy unless the question says elastic; use momentum first and then the energy difference.

Syllabus line: Work, Energy and Power Work done by a constant force and a variable force, kinetic and potential energies, work-energy theorem, power. The potential energy of a spring, conservation of mechanical energy, conservative and non- conservative forces, motion in a vertical circle. Elastic and inelastic collisions in one and two dimensions. (NTA JEE (Main) 2026 syllabus, Physics, Unit 4 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

Related topics

The concept step by step

  1. What a collision is, and what is always conserved

    In a collision two bodies exert large forces on each other for a very short time. These forces are equal and opposite, so the total momentum of the two bodies does not change, even if outside forces like friction or gravity exist, because they are small compared with the collision forces. Total momentum is conserved in every collision. Kinetic energy may or may not be.

  2. Elastic and inelastic collisions

    If kinetic energy is the same after the collision as before, it is an elastic collision. If some kinetic energy is changed into heat, sound or deformation, it is inelastic. In a perfectly inelastic collision the bodies stick and move with the same velocity, and this loses as much kinetic energy as momentum conservation permits. Most real collisions lie between the two extremes.

  3. Head-on elastic collision in one dimension

    Take the direction of u1 as positive. Momentum gives m1 u1 + m2 u2 = m1 v1 + m2 v2. Elastic energy conservation gives, after simplification, v2 - v1 = -(u2 - u1): the bodies separate at the speed at which they approached. Solving the two equations gives v1 = ((m1 - m2) u1 + 2 m2 u2)/(m1 + m2) and v2 = ((m2 - m1) u2 + 2 m1 u1)/(m1 + m2). Equal masses simply exchange velocities.

  4. Perfectly inelastic collision and the energy lost

    If the bodies stick, v = (m1 u1 + m2 u2)/(m1 + m2). When the second body is at rest, the final kinetic energy is the initial kinetic energy times m1/(m1 + m2), so the fraction lost is m2/(m1 + m2). Example: 2 kg at 6 m/s hitting 4 kg at rest has 36 J before, v = 2 m/s, 12 J after, so 24 J, which is 4/6 of 36 J, is lost.

  5. Two-dimensional collisions by components

    Momentum is a vector, so conserve it along x and along y separately: m1 u1x + m2 u2x = m1 v1x + m2 v2x, and the same for y. Kinetic energy is a scalar and uses speeds squared, vx² + vy². For an elastic collision of equal masses with one at rest, the momentum triangle and the energy equation together force the velocities after the collision to be perpendicular. Examples: 5 m/s becomes 3 m/s and 4 m/s.

  6. Typical set-ups: bullet and block, spring, ball and floor

    A bullet embedding in a block is a perfectly inelastic collision: find the common speed from momentum, then use energy for the swing afterwards, never energy for the impact itself. Two bodies compressing a spring are closest when they have the same velocity, and that instant has the same common velocity as a perfectly inelastic collision. A ball rebounding from the floor loses speed in a ratio e, which is the speed of separation over the speed of approach.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

A 3 kg block moving at 4 m/s collides with a 1 kg block at rest and they stick together. Find their common speed.

Marks-style solution of example 1
StepMarks
Momentum conservation for a perfectly inelastic collision: 3 x 4 + 1 x 0 = (3 + 1) v.1
12 = 4 v.1
v = 3 m/s.1
Total: 3 marks3

Answer: 3 m/s

Fast method: v = m1 u/(m1 + m2) = 12/4.

Sanity check: The common speed 3 m/s is between 0 and 4 m/s, as it must be. Units: (kg m/s)/kg = m/s.

Example 2 (easy)

A 2 kg ball moving at 5 m/s collides head-on and elastically with a 2 kg ball at rest. Find the speed of the target ball afterwards.

Marks-style solution of example 2
StepMarks
Equal masses in a head-on elastic collision exchange velocities.1
Check with the formula v2 = 2 m1 u1/(m1 + m2) = 2 x 2 x 5/4.1
v2 = 5 m/s; the first ball stops.1
Total: 3 marks3

Answer: 5 m/s

Fast method: Equal masses: velocities are exchanged.

Sanity check: Kinetic energy before is 25 J and after is 0.5 x 2 x 25 = 25 J, so energy is conserved. Units are m/s.

Example 3 (medium)

A 4 kg block moving at 3 m/s collides elastically and head-on with a 1 kg block at rest. Find the speed of the 1 kg block after the collision.

Marks-style solution of example 3
StepMarks
Momentum: 4 x 3 = 4 v1 + 1 x v2, so 12 = 4 v1 + v2.1
Elastic: v2 - v1 = 3 (speed of separation equals approach speed).1
Substitute v2 = v1 + 3: 12 = 4 v1 + v1 + 3, so 5 v1 = 9 and v1 = 1.8 m/s.1
v2 = 4.8 m/s.1
Total: 4 marks4

Answer: 4.8 m/s

Fast method: v2 = 2 m1 u/(m1 + m2) = 24/5.

Sanity check: The light target moves faster than the heavy striker, 4.8 m/s against 3 m/s, as expected, and the striker slows to 1.8 m/s. Energy check: 0.5 x 4 x 9 = 18 J before; 0.5 x 4 x 3.24 + 0.5 x 1 x 23.04 = 6.48 + 11.52 = 18 J after.

Example 4 (medium)

A ball dropped from 5 m height rebounds to 3.2 m after hitting the floor. Find the coefficient of restitution.

Marks-style solution of example 4
StepMarks
Speed before impact: v1 = sqrt(2 g h1), speed after: v2 = sqrt(2 g h2).1
e = v2/v1 = sqrt(h2/h1) = sqrt(3.2/5) = sqrt(0.64).1
e = 0.8.1
Total: 3 marks3

Answer: 0.8

Fast method: e = sqrt(h2/h1).

Sanity check: The value is between 0 and 1, as it must be. The height ratio 0.64 is the fraction of kinetic energy kept, e² = 0.64, so 36 percent of the kinetic energy is lost.

Typical trap: Using e = h2/h1 = 0.64. Heights are proportional to the square of the speeds, so e is the square root of the height ratio.

Example 5 (hard, multi-step)

A bullet of mass 20 g is fired horizontally into a 1.98 kg wooden block hanging from a light string. The bullet embeds and the block rises through a height of 0.2 m. Find the speed of the bullet and the fraction of its kinetic energy lost in the collision. Take g = 10 m/s².

Marks-style solution of example 5
StepMarks
Swing after the impact conserves energy: 0.5 (m + M) V² = (m + M) g h, so V = sqrt(2 x 10 x 0.2) = 2 m/s.2
Collision conserves momentum: 0.02 u = (0.02 + 1.98) x 2, so u = 4/0.02 = 200 m/s.2
Fraction lost = M/(m + M) = 1.98/2 = 0.99, so 99 percent of the kinetic energy is lost in the impact.1
Bullet speed 200 m/s; 99 percent lost.1
Total: 6 marks6

Answer: 200 m/s; 99 percent of the kinetic energy is lost

Fast method: u = (m + M) sqrt(2 g h)/m = 2 x 2/0.02.

Sanity check: Bullet kinetic energy is 0.5 x 0.02 x 40000 = 400 J; the pendulum has 0.5 x 2 x 4 = 4 J after the impact, which is 1 percent, consistent with the fraction M/(m + M). Applying energy conservation to the impact itself would give a wrong speed.

Example 6 (hard, multi-step)

A 2 kg body moving along +x at 3 m/s collides with a 1 kg body moving along +y at 6 m/s. They stick together. Find the speed of the combined body and the kinetic energy lost.

Marks-style solution of example 6
StepMarks
Momentum along x: 2 x 3 = 6 kg m/s. Momentum along y: 1 x 6 = 6 kg m/s.2
Combined mass 3 kg: velocity components (2, 2) m/s, so the speed is sqrt(8) = 2.83 m/s at 45 degrees to the x axis.2
Kinetic energy before = 0.5 x 2 x 9 + 0.5 x 1 x 36 = 27 J; after = 0.5 x 3 x 8 = 12 J.1
Speed 2.83 m/s; energy lost 15 J.1
Total: 6 marks6

Answer: 2.83 m/s at 45 degrees to the x axis; 15 J lost

Fast method: Total momentum (6, 6) divided by 3 kg.

Sanity check: The lost energy 15 J is positive and below the initial 27 J, as required. Units: kg m/s divided by kg gives m/s.

Example 7 (medium)

A 2 kg block at 6 m/s collides head-on with a 4 kg block at rest. The coefficient of restitution is 0.5. Find the speed of the 4 kg block afterwards.

Marks-style solution of example 7
StepMarks
Momentum: 2 x 6 = 2 v1 + 4 v2.1
Restitution: v2 - v1 = e x 6 = 3.1
Substitute v1 = v2 - 3: 12 = 2 v2 - 6 + 4 v2, so 6 v2 = 18.1
v2 = 3 m/s (and v1 = 0).1
Total: 4 marks4

Answer: 3 m/s

Fast method: v2 = (1 + e) m1 u/(m1 + m2) = 1.5 x 12/6.

Sanity check: The speed v2 = 3 m/s is between the perfectly inelastic value 2 m/s (e = 0) and the elastic value 4 m/s (e = 1), as it should be for e = 0.5.

Formulas and units

Formula and unit box for Collisions in one and two dimensions
ResultFormulaValid whenUnits or noteWorked example
Momentum conservation (1D, with signs)m1 u1 + m2 u2 = m1 v1 + m2 v2no external impulse during the collision; velocities with signs along one linekg m/sExample 1
Elastic, head-on: speed rulev2 - v1 = u1 - u2elastic head-on collision along one line (kinetic energy conserved)m/sExample 3
Elastic head-on, final velocitiesv1 = ((m1 - m2) u1 + 2 m2 u2)/(m1 + m2); v2 = ((m2 - m1) u2 + 2 m1 u1)/(m1 + m2)elastic head-on collision along one line, signed velocitiesm/sExample 2
Perfectly inelastic: common velocityv = (m1 u1 + m2 u2)/(m1 + m2)bodies stick together after a collision along one linem/sExample 1
Energy lost, perfectly inelasticloss = 0.5 x (m1 m2/(m1 + m2)) x (u1 - u2)²perfectly inelastic collision (bodies stick together)JExample 5
Coefficient of restitutione = (v2 - v1)/(u1 - u2) = sqrt(h2/h1) for a ball and floorhead-on collision; height form only for a ball dropped on a fixed floorno unitExample 4
General inelastic, target at restv2 = (1 + e) m1 u/(m1 + m2); v1 = (m1 - e m2) u/(m1 + m2)head-on collision, m2 initially at rest, m1 has speed u, restitution em/sExample 7
2D collision: componentssum of px and sum of py each conserved; K from vx² + vy²no external impulse in the plane; resolve along two perpendicular axeskg m/s (J)Example 6
Equal masses, elastic, one at rest, obliquev1 + v2 perpendicular; v1² + v2² = u²elastic oblique collision, equal masses, one initially at restm/snone

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Conserving kinetic energy in a collision where the bodies stick or deform. Why it tempts: Energy conservation is a familiar tool, but kinetic energy is conserved only in elastic collisions; the option calculated with it is usually present.
  • Dropping the sign of a velocity moving opposite to the positive direction. Why it tempts: Speeds are quoted as positive numbers in the stem, and head-on collisions with opposite directions then give a wrong momentum sum.
  • Stating the energy remaining instead of the energy lost in a perfectly inelastic collision. Why it tempts: For a target initially at rest, the energy remaining and the energy lost are simple fractions of the initial energy, m1/(m1 + m2) and m2/(m1 + m2), and the wrong one appears as an option.
  • Using e = h2/h1 for a bouncing ball. Why it tempts: The height ratio is easy to read from the stem, but e is the ratio of speeds, so it is the square root of the height ratio.
  • Using energy conservation across the impact in a bullet and block set-up. Why it tempts: The block rises and the energy equation is neat, but nearly all the kinetic energy is lost in the impact, so momentum must be applied across it.

Time per question and fast method

Target: about 110 seconds per question.

One dimension: write momentum, then speed of separation = e x speed of approach (e = 1 for elastic, 0 for sticking): two linear equations, no formula recall needed. Two dimensions: split into components, conserve each, then take kinetic energy last. For equal masses, elastic, one at rest, use the right-angle triangle v1² + v2² = u².

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. A 5 kg body moving at 2 m/s sticks to a 3 kg body at rest. The common speed, in m/s, is
Show the answer

Answer: C: 1.25. v = 5 x 2/8 = 1.25 m/s.

Question 2. When two equal masses collide perfectly inelastically and one is at rest, the fraction of the initial kinetic energy lost is
Show the answer

Answer: D: 0.5. The fraction lost is m2/(m1 + m2) = 1/2.

Question 3. A 1 kg body at 4 m/s hits an equal body at rest, head-on and elastically. The speed of the target afterwards, in m/s, is
Show the answer

Answer: B: 4. Equal masses exchange velocities, so the target moves at 4 m/s.

Question 4. A 1 kg body at 6 m/s hits a 2 kg body at rest, head-on and elastically. The speed of the 1 kg body afterwards, in m/s, is
Show the answer

Answer: D: 2. v1 = (m1 - m2) u/(m1 + m2) = -6/3 = -2 m/s, so it rebounds at a speed of 2 m/s.

Question 5. In an elastic collision of two bodies of equal mass, one initially at rest, that is not head-on, the angle between the velocities after the collision is
Show the answer

Answer: A: 90 degrees. Momentum gives u = v1 + v2 as vectors and energy gives v1² + v2² = u², so v1.v2 = 0 and the angle is 90 degrees.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Momentum conservation and the impulsive-force argument

For two bodies that collide, the force each exerts on the other is equal and opposite at every instant by Newton's third law, so the total momentum change is zero over the collision, p1 + p2 = constant. This holds when external forces are negligible during the short collision time, such as friction and gravity compared with the contact force, and it holds whatever the type of collision. In one dimension fix a positive direction and enter every velocity with its sign. In two dimensions apply the law separately along two perpendicular axes. The centre of mass of the two bodies moves with constant velocity through the collision. Momentum is conserved even in an explosion or in a perfectly inelastic collision, and the only thing that distinguishes collision types is what happens to kinetic energy. A frequent slip is to treat the speed of a rebounding body as positive when it is entered in the momentum equation; the sign of the velocity must follow the chosen direction.

Elastic collisions in one dimension: results and special cases

For an elastic head-on collision, v1 = ((m1 - m2) u1 + 2 m2 u2)/(m1 + m2) and v2 = ((m2 - m1) u2 + 2 m1 u1)/(m1 + m2), together with v2 - v1 = u1 - u2 (speed of separation equals speed of approach, which follows from energy and momentum together). Special cases with the target at rest: equal masses give v1 = 0 and v2 = u1, a complete transfer; a light body striking a much heavier one rebounds with nearly its own speed and the heavy body hardly moves; a heavy body striking a much lighter one continues at nearly u1 while the light one moves at nearly 2 u1. The relative-speed rule plus momentum is a faster route than the formulas, since it gives two simple linear equations. For a given incoming momentum, the largest impulse on the struck body comes from a light ball rebounding from a heavy one, when the impulse is nearly 2 m u.

Inelastic and perfectly inelastic collisions; coefficient of restitution

In an inelastic collision kinetic energy falls and the speed of separation is less than the speed of approach. The ratio e = (speed of separation)/(speed of approach) along the line of impact is a measure of how elastic the collision is: e = 1 elastic, e = 0 perfectly inelastic, and 0 < e < 1 in between. For a ball dropped from height h1 on a floor that rebounds to h2, e = sqrt(h2/h1), since speeds scale as the square root of heights. In a perfectly inelastic collision, v = (m1 u1 + m2 u2)/(m1 + m2) and the energy lost is 0.5 x (m1 m2/(m1 + m2)) x (u1 - u2)², which is zero only when the bodies have the same velocity. The energy lost is never negative, which makes a good check; if a calculation shows more kinetic energy after the collision without any energy source, there is an arithmetic or sign error. In the ballistic pendulum the collision loses almost all kinetic energy, the fraction M/(m + M) for a bullet m in a block M, and the later swing conserves energy only after the collision.

Two-dimensional collisions: components and the 90 degree result

Choose axes along the initial velocity. For a collision of m1 moving along x with m2 at rest, momentum gives m1 u = m1 v1 cos(a) + m2 v2 cos(b) and 0 = m1 v1 sin(a) - m2 v2 sin(b). If the collision is elastic, add m1 u² = m1 v1² + m2 v2². Solving these requires one extra datum, such as an angle or a final speed. For equal masses and an elastic collision, m u² = m v1² + m v2² and the vector relation u = v1 + v2 give v1.v2 = 0, so the bodies move off at 90 degrees: a speed of 3 m/s for one ball implies 4 m/s for the other when the incoming speed is 5 m/s. For inelastic collisions in two dimensions only the momentum equations hold, and the energy lost is found afterwards as the difference of the kinetic energies. A perfectly inelastic collision of perpendicular momenta p1 and p2 gives a combined momentum of magnitude sqrt(p1² + p2²) at an angle tan(angle) = p2/p1 to the first.

What examiners test and edge cases

Standard tasks: velocities after a head-on elastic collision with signs; energy lost when two bodies stick; the common speed in a bullet and block set-up and the height reached; a spring compressed by two bodies, where the maximum compression is at the instant of equal velocities; the speed of the second body in an equal-mass elastic oblique collision; and the energy lost in a collision where components are given. Edge cases: a collision with a fixed wall conserves the speed in an elastic case and reverses its direction, and the wall gains momentum but no energy; momentum conservation along a direction fails if an impulsive external force acts along it, for instance a fixed surface during an oblique hit. Always check that the final kinetic energy does not exceed the initial one, and that for a perfectly inelastic collision the common speed lies between u1 and u2. Typical time is 90 to 140 seconds, and the two-dimensional component questions take longer.

Memory hook

Suppose two friends are playing carrom, and the striker hits a coin that is lying at rest on the board.

  1. If the striker and the coin were equal in mass and the hit were head-on and clean, the striker would stop and the coin would move off with the striker's speed.
  2. If the striker hits the coin off-centre, both move away from each other at an angle, and the two paths come out at a right angle when the masses are equal and no energy is lost.
  3. If a lump of clay were stuck on the coin so that the striker stays attached to it, the pair would move on together slowly, and part of the striker's kinetic energy would be lost as heat and sound.
  4. In all these cases the total push, mass times velocity, of striker and coin together is the same before and after.

Total momentum is the same before and after every collision; kinetic energy survives only when the bodies bounce off cleanly.

Momentum is always conserved, kinetic energy only if elastic; in 2D, conserve each component.

Revision card

Try to answer each without looking above.

  1. Say what is conserved in every collision and what only in an elastic one.
  2. Write the speed-of-separation rule and the final velocities for a head-on elastic collision.
  3. Write the common velocity and the energy lost for a perfectly inelastic collision.
  4. State what happens when equal masses collide elastically and head-on, and when they collide obliquely with one at rest.
  5. How do you handle a two-dimensional collision, and what do you do for the energy?
  6. Why must you not use energy conservation across a bullet embedding into a block?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (see content/reviews/scope-audit-2026-11-20.md)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 2; fixed: 2
  • Report: content/reviews/learn2-wep-2026-11-20.md

Textbook references

  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 5: Work, Energy and Power, 5.11.1 Elastic and Inelastic Collisions (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 5: Work, Energy and Power, 5.11.3 Collisions in Two Dimensions (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 5: Work, Energy and Power, 5.11.2 Collisions in One Dimension (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 4 (https://jeemain.nta.nic.in/document/syllabus-2026/), read from syllabus/lines/jee-main/2026.json
  • Standard results are derived in the notes and every number is recomputed by code; no textbook section was opened for this page, so section references are pending

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.