EngineeringRise

Simple Harmonic Motion and Energy: JEE Main Notes

Reviewed Last updated 2026-11-20. Syllabus topic: Simple harmonic motion and energy.

In short. SHM obeys a = -omega² x, giving x = A sin(omega t + phi) and T = 2 pi/omega. Speed is v = omega sqrt(A² - x²). Total energy (1/2) m omega² A² is constant; KE and PE swap and each averages half of it.

  • The defining condition is a = -omega² x: the restoring acceleration is proportional to displacement and opposite to it.
  • x = A sin(omega t + phi); T = 2 pi/omega = 1/f; v_max = A omega at the mean position, a_max = A omega² at the extremes.
  • v² = omega² (A² - x²); KE = (1/2) m omega² (A² - x²), PE = (1/2) m omega² x², E = (1/2) m omega² A².
  • KE and PE each oscillate at twice the frequency of x; each averages E/2 over a period, and KE = PE at x = A/sqrt(2).

Syllabus line: Oscillations and Waves Oscillations and periodic motion: time period, frequency, displacement as a function of time, periodic functions. Simple harmonic motion (S.H.M.) and its equation, phase, oscillations of a spring: restoring force and force constant, energy in S.H.M.: kinetic and potential energies, simple pendulum: derivation of expression for its time period. Wave motion, longitudinal and transverse waves, speed of the travelling wave, displacement relation for a progressive wave, principle of superposition of waves, reflection of waves, standing waves in strings and organ pipes, fundamental mode and harmonics, beats. (NTA JEE (Main) 2026 syllabus, Physics, Unit 10 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

Related topics

The concept step by step

  1. Periodic and oscillatory motion

    A motion that repeats after a fixed interval is periodic; the smallest such interval is the time period T, in seconds, and the number of repetitions per second is the frequency f = 1/T, in hertz. Angular frequency is omega = 2 pi f = 2 pi/T, in rad/s. An oscillation is a periodic to-and-fro motion about a mean (equilibrium) position. All oscillations are periodic, but not all periodic motions are oscillations: the Earth going round the Sun is periodic, not oscillatory.

  2. The defining condition of SHM

    A particle executes simple harmonic motion when its acceleration is proportional to its displacement from the mean position and always directed towards it: a = -omega² x. Equivalently the net force is a restoring force F = -k x, with omega² = k/m. The minus sign is the physics: the force opposes the displacement. A force like F = -k x² or a constant-magnitude force is not SHM.

  3. Displacement, velocity, acceleration and phase

    The solution of a = -omega² x is x = A sin(omega t + phi). A is the amplitude, (omega t + phi) the phase, phi the initial phase (epsilon in some books). Differentiating: v = A omega cos(omega t + phi) and a = -A omega² sin(omega t + phi). Velocity leads displacement by pi/2 in phase and acceleration is in antiphase with displacement. Maximum speed A omega occurs at the mean position, maximum acceleration A omega² at the extremes where speed is zero.

  4. Speed as a function of position

    Eliminating time between x and v gives v² = omega² (A² - x²), so v = omega sqrt(A² - x²). Two measurements of speed at two displacements fix both omega and A: subtract the two equations to get omega², then substitute back for A. This is the standard route for problems that give no equation of motion, only data at two points.

  5. Energy in SHM

    Kinetic energy is (1/2) m v² = (1/2) m omega² (A² - x²). Potential energy, taking zero at the mean position, is (1/2) m omega² x² = (1/2) k x². Their sum is (1/2) m omega² A², constant when there is no friction. At the extremes all the energy is potential, at the mean position all is kinetic. KE = PE at x = A/sqrt(2), and when x = A/2 the kinetic energy is three quarters of the total.

  6. Timing with the reference circle

    Imagine a point moving uniformly round a circle of radius A with angular speed omega; its projection on a diameter executes SHM. The time between two displacements is the angle swept divided by omega. From the mean position to half amplitude the angle is 30 degrees, time T/12; from the extreme to half amplitude it is 60 degrees, time T/6; from the mean position to the extreme it is T/4. Use these angles directly instead of solving trigonometric equations.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

A particle moves as x = 0.050 sin(20 t) metre, with t in seconds. Find the time period and the frequency.

Marks-style solution of example 1
StepMarks
Compare with x = A sin(omega t): omega = 20 rad/s.1
T = 2 pi/omega = 2 pi/20 = 0.314 s.1
f = 1/T = 3.18 Hz. The time period is 0.314 s.1
Total: 3 marks3

Answer: T = 0.314 s, f = 3.18 Hz

Fast method: T = 2 pi/20 = 0.314 s directly, since omega is the number multiplying t.

Sanity check: Units: rad/s gives s after dividing 2 pi. A larger omega gives a shorter period; 20 rad/s is about 3 oscillations per second, matching f = 3.18 Hz.

Example 2 (easy)

A particle executes SHM of amplitude 0.080 m with angular frequency 5.0 rad/s. Find its maximum speed and its maximum acceleration.

Marks-style solution of example 2
StepMarks
Maximum speed is at the mean position: v_max = A omega = 0.080 x 5.0 = 0.40 m/s.1
Maximum acceleration is at the extremes: a_max = A omega² = 0.080 x 25.1
a_max = 2.0 m/s²; v_max = 0.40 m/s.1
Total: 3 marks3

Answer: v_max = 0.40 m/s, a_max = 2.0 m/s²

Fast method: a_max = v_max x omega = 0.40 x 5.0 = 2.0 m/s².

Sanity check: Units: m x rad/s = m/s; m x (rad/s)² = m/s². The ratio a_max/v_max equals omega = 5.0 per second, a quick consistency test.

Example 3 (medium)

A particle of amplitude 0.10 m and angular frequency 4.0 rad/s is at a displacement of 0.060 m from the mean position. Find its speed there.

Marks-style solution of example 3
StepMarks
Use v = omega sqrt(A² - x²).1
A² - x² = 0.0100 - 0.0036 = 0.0064, so sqrt = 0.080 m.2
v = 4.0 x 0.080 = 0.32 m/s.1
Total: 4 marks4

Answer: 0.32 m/s

Fast method: A 6-8-10 triangle: sqrt(0.1² - 0.06²) = 0.08, so v = 4 x 0.08 = 0.32 m/s.

Sanity check: Units: rad/s x m = m/s. The speed 0.32 m/s is below the maximum A omega = 0.40 m/s, as it must be away from the mean position; at x = 0 the formula returns 0.40 m/s and at x = A it returns 0.

Example 4 (medium)

A block of mass 0.20 kg oscillates with amplitude 0.050 m and angular frequency 10 rad/s. Find the total energy, and the kinetic energy and potential energy when the displacement is half the amplitude. Give the kinetic energy in mJ.

Marks-style solution of example 4
StepMarks
E = (1/2) m omega² A² = 0.5 x 0.20 x 100 x 0.0025 = 0.025 J = 25 mJ.2
PE = (1/2) m omega² x² with x = A/2 is one quarter of E: 6.25 mJ.1
KE = E - PE = 25 - 6.25 = 18.75 mJ.1
Total: 4 marks4

Answer: E = 25 mJ, PE = 6.25 mJ, KE = 18.75 mJ

Fast method: PE fraction = (x/A)² = 1/4, so KE fraction = 3/4 of 25 mJ = 18.75 mJ.

Sanity check: Units: kg (rad/s)² m² = J. KE + PE = 25 mJ, as required. Limiting case: at x = A the KE would be zero, at x = 0 it would be the full 25 mJ.

Example 5 (medium)

A particle in SHM of time period 12 s starts from the positive extreme position. Find the time it takes to reach a displacement equal to half the amplitude.

Marks-style solution of example 5
StepMarks
From the extreme, use x = A cos(omega t), omega = 2 pi/12 rad/s.1
x = A/2: cos(omega t) = 1/2, so omega t = pi/3.1
t = (pi/3)/(2 pi/12) = 12/6 = 2 s.1
Total: 3 marks3

Answer: 2 s

Fast method: Extreme to half amplitude sweeps 60 degrees of the reference circle: T/6 = 2 s.

Sanity check: Units: seconds. The time to go from the extreme all the way to the mean position is T/4 = 3 s, so 2 s for the first half of the amplitude is plausible (the particle is slow near the extreme, so the first half of the distance takes longer than the second half, which takes T/12 = 1 s).

Typical trap: Using T/12 (the time from the mean position) when the motion starts at the extreme. The sine and cosine starting points are different; the particle starts slowly from an extreme, so it takes longer.

Example 6 (hard, multi-step)

A particle moves as x = 0.040 sin(10 t + pi/6) metre. Find the displacement and velocity at t = 0, and the first time t > 0 at which it passes the mean position.

Marks-style solution of example 6
StepMarks
At t = 0: x = 0.040 sin(pi/6) = 0.040 x 0.5 = 0.020 m.1
v = dx/dt = 0.40 cos(10 t + pi/6); at t = 0, v = 0.40 cos(pi/6) = 0.346 m/s towards +x.2
It reaches x = 0 when the phase first equals pi (phase is pi/6 and increasing): 10 t + pi/6 = pi.1
t = (5 pi/6)/10 = 0.262 s.1
Total: 5 marks5

Answer: x(0) = 0.020 m, v(0) = 0.346 m/s, first crossing at t = 0.262 s

Fast method: Phase starts at 30 degrees and increases at 10 rad/s; the next zero of sine is at 180 degrees, a sweep of 150 degrees = 5 pi/6 rad, so t = 0.2618 s.

Sanity check: Units: rad divided by rad/s gives s. Since the particle starts moving outwards (v positive, x positive), it first reaches the extreme (phase pi/2, at t = 0.105 s), returns and passes x = 0 at 0.262 s, exactly a quarter period (0.157 s) after the extreme, consistent with T = 0.628 s.

Example 7 (hard)

A particle moves as x = A sin²(omega t) with omega = 5.0 rad/s. Show that this is SHM and find its time period. Give the period in seconds.

Marks-style solution of example 7
StepMarks
Rewrite: sin²(omega t) = (1 - cos 2 omega t)/2, so x = A/2 - (A/2) cos(2 omega t).2
About the mean position x = A/2 the displacement is -(A/2) cos(2 omega t): a single sinusoid, so SHM with amplitude A/2.1
Angular frequency is 2 omega = 10 rad/s, so T = 2 pi/10 = 0.628 s.1
Total: 4 marks4

Answer: SHM about x = A/2 with T = 0.628 s

Fast method: The squared sine doubles the frequency: T = pi/omega = pi/5 = 0.628 s.

Sanity check: Units: seconds. Check by direct repetition: sin² repeats after omega t increases by pi, that is after t = pi/5 s, the same 0.628 s. The naive answer 2 pi/omega = 1.26 s would be wrong by a factor two.

Formulas and units

Formula and unit box for Simple harmonic motion and energy
ResultFormulaValid whenUnits or noteWorked example
Defining conditiona = -omega² x; F = -k x with omega² = k/mrestoring force proportional to displacement, directed to the mean positionm/s² (N)none
Displacementx = A sin(omega t + phi)x measured from the mean position; phase in radiansm (phase in rad)Example 1
Period, frequency, angular frequencyT = 2 pi/omega = 1/f; omega = 2 pi fany periodic motion; for SHM omega = sqrt(k/m) of the systems (Hz, rad/s)Example 1
Velocity and accelerationv = A omega cos(omega t + phi); a = -A omega² sin(omega t + phi)SHM with x = A sin(omega t + phi); phase in radiansm/s (m/s²)Example 6
Speed at a positionv = omega sqrt(A² - x²); v_max = A omega; a_max = A omega²SHM; x measured from the mean positionm/s (m/s²)Example 2
Kinetic energyKE = (1/2) m omega² (A² - x²)SHM; x is displacement from the mean positionJnone
Potential energyPE = (1/2) m omega² x² = (1/2) k x²SHM; x is displacement from the mean positionJExample 4
Total energyE = (1/2) m omega² A² = (1/2) k A²SHM with no energy loss (undamped, conservative)JExample 4
Special positionsKE = PE at x = A/sqrt(2); KE/PE = n at x = A/sqrt(n + 1)SHM; x measured from the mean positionmnone
Reference-circle timesmean to A/2: T/12; extreme to A/2: T/6; mean to extreme: T/4SHM, time measured along the reference circlesnone

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Reading omega as the coefficient of pi or dropping the pi: for x = 0.03 sin(4 pi t) taking omega = 4. Why it tempts: The number 4 is what stands out in the equation, and the pi looks like decoration; the options then include a_max computed with omega = 4, a value that looks neat.
  • Using T/12 for the time from the extreme to half amplitude (or T/6 from the mean position). Why it tempts: Both times look like fractions of T from a half-amplitude condition, and the sine form is the one most often memorised; the starting point changes the angle swept.
  • Equating KE = n PE with x = A/n or x = A/sqrt(n). Why it tempts: The ratio is mistaken for a ratio of displacement. The correct condition is KE/PE = (A² - x²)/x² = n, which gives x = A/sqrt(n + 1).
  • Adding the two speeds, or averaging them, when two-point data are given. Why it tempts: Speeds at two points seem to be measurements of the same quantity; but v changes with x and only v² = omega² (A² - x²) links them.
  • Taking any periodic function as SHM, e.g. sin(omega t) + sin(2 omega t), or forgetting the doubled frequency in sin². Why it tempts: Repetition is the visible feature of SHM; the single-sinusoid test is less obvious.

Time per question and fast method

Target: about 80 seconds per question.

Read omega first from the given equation. For speed at a point use v = omega sqrt(A² - x²) and look for Pythagorean triples (3-4-5, 6-8-10). For energy questions work in fractions of E: PE fraction = (x/A)², KE fraction = 1 minus that. For time questions use the reference circle angles: T/12, T/8, T/6, T/4 for 30, 45, 60, 90 degrees, and decide whether the start is at the mean position or at an extreme.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. A particle follows x = 0.020 sin(8 t) metre. Its maximum speed, in m/s, is
Show the answer

Answer: A: 0.16 m/s. v_max = A omega = 0.020 x 8 = 0.16 m/s.

Question 2. A particle of amplitude 0.10 m has equal kinetic and potential energy at a displacement of
Show the answer

Answer: B: 0.0707 m. KE = PE gives x = A/sqrt(2) = 0.0707 m.

Question 3. The angular frequency of an SHM of time period 2.0 s, in rad/s, is
Show the answer

Answer: C: 3.14 rad/s. omega = 2 pi/T = pi = 3.14 rad/s.

Question 4. The kinetic energy of a particle in SHM of period T varies with a period of
Show the answer

Answer: B: T/2. KE is proportional to cos²(omega t + phi), which repeats every half period of the displacement.

Question 5. A particle in SHM of period 2.0 s starts from the mean position. The time taken to reach the extreme position, in seconds, is
Show the answer

Answer: C: 0.50 s. Mean position to extreme is a quarter period: 2.0/4 = 0.50 s.

Question 6. The amplitude of an SHM is doubled with the same omega and mass. The total energy becomes
Show the answer

Answer: B: 4 times. E = (1/2) m omega² A² is proportional to A², so it becomes 4 times.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Definitions, units and the equation of motion

Time period T (s), frequency f (Hz = s⁻1), angular frequency omega (rad/s), amplitude A (m, the maximum displacement), phase (omega t + phi) in radian. For a body of mass m under a restoring force F = -k x, the equation m d2x/dt2 = -k x has solution x = A sin(omega t + phi) with omega = sqrt(k/m). The period does not depend on the amplitude (isochronism) as long as the restoring force stays linear. The quantity omega² is the acceleration per unit displacement and is the first thing to read from any given equation of motion: for x = 0.03 sin(4 pi t), omega = 4 pi rad/s, not 4.

Phase, initial conditions and sin versus cos

x = A sin(omega t + phi) and x = A cos(omega t + phi') describe the same family; the two initial phases differ by pi/2. If the particle starts from the mean position moving towards +x, phi = 0 for the sine form. If it starts from the positive extreme, use the cosine form with zero phase. The initial phase is fixed by x(0) and the sign of v(0): for x = 0.04 sin(10 t + pi/6), x(0) = 0.02 m and v(0) = 0.4 cos(pi/6) = 0.346 m/s, positive. Two SHMs of equal omega have a phase difference that is constant in time; a phase difference of pi means they are always on opposite sides of the mean position.

Energy graphs, averages and the double frequency

KE and PE are both proportional to sine or cosine squared, so each oscillates at twice the frequency of the displacement and has period T/2. Plotted against x, KE is an inverted parabola and PE an upright parabola meeting at x = plus or minus A/sqrt(2); their sum is a horizontal line at E. Time averages over a full period: average KE = average PE = E/2 = (1/4) m omega² A². Averages over displacement are different: the average of x² over distance is A²/3, so the position-average of PE is E/3. Examiners use this difference. Energy scales as A²: doubling the amplitude quadruples E at the same omega.

Periodic functions that are not SHM and ones that are

A periodic function is not automatically SHM. Test by writing the function as a single sine or cosine plus a constant. x = A sin²(omega t) = (A/2)(1 - cos 2 omega t) is SHM about the mean position A/2 with angular frequency 2 omega and amplitude A/2; its period is pi/omega. x = sin(omega t) + cos(omega t) = sqrt(2) sin(omega t + pi/4) is SHM of amplitude sqrt(2). x = sin(omega t) + sin(2 omega t) is periodic with period 2 pi/omega but is not SHM, since it cannot be written as one sinusoid. A motion like a ball bouncing elastically on a floor is periodic but its acceleration is constant in magnitude, so it is not SHM. For a sum of two terms of different frequencies, the common period is the smallest time after which both repeat.

What examiners test and edge cases

Typical items: omega, T, amplitude and phase read from a given equation; maximum speed and acceleration; speed at a given displacement; time to travel between two positions (use the reference circle); displacement at which KE equals n times PE; energy at a displacement; two-point data to find omega and A; v-t or a-x graph interpretation (a-x is a straight line of slope -omega² through the origin); and whether a given function is SHM. Edge cases: the same equation with a sign change in phase flips the initial direction of motion; speeds are magnitudes, velocities carry sign; potential energy depends on the zero chosen, kinetic energy does not (it depends only on the speed), and the sum for a given choice is constant. Always convert cm to m before computing energy or acceleration in SI.

Memory hook

Suppose a child sits on a swing (jhoola) in a park, and an elder pulls the seat back a little and lets go.

  1. At the highest point behind, the seat stops for an instant, and the pull back towards the middle is strongest.
  2. As the seat swings down, it speeds up; at the lowest point it moves fastest and the pull towards the middle is zero.
  3. Past the middle it rises on the other side, slowing as the pull back grows, and stops at nearly the same height it started from.

Maximum restoring pull and zero speed at the extremes; zero pull and maximum speed at the middle: a = -omega² x with energy swapping between height (potential) and motion (kinetic).

Fast in the middle, still at the ends: speed and pull take turns, and the total energy stays the same.

Revision card

Try to answer each without looking above.

  1. State the defining condition of SHM in terms of acceleration and displacement.
  2. Write x, v and a for SHM and state where each is largest.
  3. Write v in terms of A, x and omega, and use it with two data points to find omega.
  4. Write KE, PE and E; at what displacement are KE and PE equal?
  5. How long from the mean position, and from the extreme, to half the amplitude?
  6. Why is x = A sin²(omega t) SHM and what is its period?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 1; fixed: 1
  • Report: content/reviews/learn4-osc-2026-11-20.md

Textbook references

  • NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 13: Oscillations, 13.6 Force law for simple harmonic motion (read 2026-11-22)
  • NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 13: Oscillations, Points to ponder Points to ponder (read 2026-11-22)
  • NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 13: Oscillations, 13.3 Simple harmonic motion (read 2026-11-22)
  • NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 13: Oscillations, Summary Summary (read 2026-11-22)
  • NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 13: Oscillations, 13.2.1 Period and frequency (read 2026-11-22)
  • NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 13: Oscillations, 13.2 Periodic and oscillatory motions (read 2026-11-22)
  • NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 13: Oscillations, 13.7 Energy in simple harmonic motion (read 2026-11-22)
  • NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 13: Oscillations, 13.4 Simple harmonic motion and uniform circular motion (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 10 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
  • NTA JEE (Main) 2026 syllabus, Physics, Unit 10 (https://jeemain.nta.nic.in/document/syllabus-2026/), read for scope
  • Standard results of school-level oscillations and waves; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.