EngineeringRise

Motion in a Straight Line: JEE Main Notes and Solutions

Reviewed Last updated 2026-11-20. Syllabus topic: Motion in a straight line.

In short. Motion in a straight line is described by position, velocity and acceleration along one axis, with signs for direction. For constant acceleration use v = u + at, s = ut + (1/2)at² and v² = u² + 2as; for varying acceleration use calculus and read areas and slopes on graphs.

  • Choose a positive direction first; displacement, velocity and acceleration are signed, distance and speed are not.
  • The three equations of motion hold only while acceleration is constant, so split the motion where it changes.
  • Slope of x-t is velocity, slope of v-t is acceleration, and area under v-t is displacement.
  • Free fall near the ground has a = 10 m/s² downward everywhere, including at the top of a throw.
  • Distance needs a split at every turning point (v = 0); displacement does not.

Syllabus line: Kinematics The frame of reference, motion in a straight line, speed and velocity, uniform and non-uniform motion, average speed and instantaneous velocity, uniformly accelerated motion, velocity-time, position-time graph, relations for uniformly accelerated motion, relative velocity. Motion in a plane, projectile motion, uniform circular motion. (NTA JEE (Main) 2026 syllabus, Physics, Unit 2 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

Related topics

The concept step by step

  1. Step 1: Position, displacement and distance

    Pick a straight line and a positive direction. Position x is the signed coordinate. Displacement is final position minus initial position, so it can be positive, negative or zero. Distance adds up every bit of path regardless of direction. A man who walks 30 m east and 10 m back west has a displacement of 20 m east but has covered 40 m.

  2. Step 2: Speed, velocity and acceleration

    Average velocity is displacement divided by time; average speed is total distance divided by time, so it is never smaller in size. Instantaneous velocity is the slope of the x-t graph, v = dx/dt. Acceleration is the rate of change of velocity, a = dv/dt, and its sign is relative to your chosen direction. A body slowing down while moving in the positive direction has negative acceleration.

  3. Step 3: The three equations for constant acceleration

    If a is constant: v = u + at, s = ut + (1/2)at², v² = u² + 2as. Each leaves out one quantity, so pick the one that omits what you do not know. A car from rest with a = 2 m/s² for 10 s reaches v = 20 m/s and covers s = (1/2)(2)(100) = 100 m. Check: v² = 2as = 400 gives v = 20 m/s as well.

  4. Step 4: Free fall and vertical throws

    Near the ground the acceleration is 10 m/s² downward, whatever the velocity. Take up as positive and write a = -10 m/s². A stone thrown up at 20 m/s stops after 2 s at a height of 20 m, then returns to the start at 4 s with speed 20 m/s. The acceleration at the top is still -10 m/s²; only the velocity is zero there.

  5. Step 5: Reading graphs

    On x-t: slope is velocity; a straight line means constant velocity, a curve bending upward means positive acceleration. On v-t: slope is acceleration and signed area is displacement. For a trapezoid that rises to 20 m/s in 5 s, stays for 10 s and falls in 5 s, the area is 50 + 200 + 50 = 300 m. Areas below the time axis count negative for displacement.

  6. Step 6: Nth-second and chase problems

    The displacement in the nth second is s_n = u + a(n - 1/2), found by subtracting position at n - 1 from position at n. For chases, write the position of each body as a function of the same clock and set them equal. This equals the distance only if the velocity does not change sign during that second. Two bodies meet when their positions match, not when their speeds match; speeds match at maximum or minimum separation.

  7. Step 7: Variable acceleration and turning points

    When x(t) or v(t) is given as a polynomial, differentiate to go from position to velocity to acceleration, and integrate to go back. Total distance needs the times where v = 0, because the body reverses there. Evaluate position at every such time and add the absolute changes. If x = t³ - 9t² + 24t, then v = 3(t - 2)(t - 4) is zero at t = 2 s and t = 4 s.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

A car starts from rest with constant acceleration 2 m/s². Find the distance it covers in the first 10 s.

Marks-style solution of example 1
StepMarks
s = ut + (1/2)at² with u = 0.1
s = (1/2)(2)(10)² = 100.1
Distance covered = 100 m.1
Total: 3 marks3

Answer: 100 m

Fast method: From rest, s = (1/2)at²; 1 x 100 = 100 m.

Sanity check: Units: (m/s²)(s²) = m. Final speed 20 m/s over 10 s with average 10 m/s gives 100 m. Matches.

Example 2 (easy)

A stone is dropped from a tower and takes 4 s to reach the ground. Find the height of the tower. Take g = 10 m/s².

Marks-style solution of example 2
StepMarks
Dropped from rest: h = (1/2)g t².1
h = 5 x 16 = 80.1
Height = 80 m.1
Total: 3 marks3

Answer: 80 m

Fast method: Distances in successive seconds are 5, 15, 25, 35 m; sum is 80 m.

Sanity check: Final speed g t = 40 m/s, average 20 m/s over 4 s gives 80 m. Matches.

Example 3 (medium)

A stone is thrown vertically upward at 20 m/s from level ground. Find the total distance it has travelled 3 s after the throw. Take g = 10 m/s².

Marks-style solution of example 3
StepMarks
Time to the top is u/g = 2 s and maximum height is u²/(2g) = 20 m.1
In the remaining 1 s it falls from rest: (1/2)(10)(1)² = 5 m.1
Distance = 20 + 5 = 25 m (the displacement is 15 m above the start).2
Total: 4 marks4

Answer: 25 m

Fast method: Go up 20 m, come down 5 m: 25 m. Never apply one formula across the turning point when distance is asked.

Sanity check: Distance 25 m is at least the displacement 15 m, as it must be. At 3 s the stone is 5 m below the top.

Typical trap: Using s = ut - (1/2)gt² for t = 3 s gives 15 m, which is the displacement, not the distance, because the stone turned at 2 s.

Example 4 (medium)

A body moves with uniform acceleration 4 m/s² and initial velocity 5 m/s. Find the distance it covers in the fifth second.

Marks-style solution of example 4
StepMarks
Distance in the nth second: s_n = u + a(n - 1/2).1
s₅ = 5 + 4(4.5) = 5 + 18.1
Distance in the fifth second = 23 m.1
Total: 3 marks3

Answer: 23 m

Fast method: Velocity at the middle of the fifth second (t = 4.5 s) is 5 + 18 = 23 m/s, and in 1 s the distance is 23 m.

Sanity check: Check by difference: s(5) = 25 + 50 = 75 m, s(4) = 20 + 32 = 52 m, difference 23 m. Matches.

Example 5 (medium)

A train accelerates from rest uniformly to 20 m/s in 5 s, runs at that speed for 10 s, and then brakes uniformly to rest in 5 s. Find the total distance and the average speed.

Marks-style solution of example 5
StepMarks
Distance is the area under the v-t trapezoid.1
Accelerating: (1/2)(20)(5) = 50 m; steady: 20 x 10 = 200 m; braking: (1/2)(20)(5) = 50 m.2
Total distance = 300 m over 20 s, so average speed = 300/20 = 15 m/s.2
Total: 5 marks5

Answer: 300 m; 15 m/s

Fast method: Trapezoid area = (1/2)(20 + 10)(20) = 300 m: parallel sides are the total time 20 s and the steady time 10 s.

Sanity check: Average speed 15 m/s lies between 0 and the maximum 20 m/s, and above 10 m/s because most of the trip is at top speed.

Example 6 (hard, multi-step)

The position of a particle is x = t³ - 9t² + 24t metres, with t in seconds. Find the total distance travelled from t = 0 to t = 5 s.

Marks-style solution of example 6
StepMarks
Velocity v = dx/dt = 3t² - 18t + 24 = 3(t - 2)(t - 4), zero at t = 2 s and t = 4 s (both turning points).2
Positions: x(0) = 0, x(2) = 8 - 36 + 48 = 20 m, x(4) = 64 - 144 + 96 = 16 m, x(5) = 125 - 225 + 120 = 20 m.2
Legs: 0 to 2 s covers 20 m; 2 to 4 s covers 4 m; 4 to 5 s covers 4 m.1
Total distance = 20 + 4 + 4 = 28 m (displacement is 20 m).1
Total: 6 marks6

Answer: 28 m

Fast method: List turning times, evaluate x there, add absolute differences.

Sanity check: Distance 28 m is not less than the displacement 20 m. Velocity is positive before 2 s, negative between 2 s and 4 s, positive after: two reversals, three legs.

Typical trap: x(5) - x(0) = 20 m is the displacement. Distance needs the reversals at 2 s and 4 s.

Example 7 (hard, multi-step)

A truck moving at a constant 12 m/s passes a stationary car at the instant the car starts from rest with a constant acceleration of 3 m/s². How far from the starting point does the car overtake the truck?

Marks-style solution of example 7
StepMarks
Truck position: x_T = 12t. Car position: x_C = (1/2)(3)t² = 1.5t².1
Overtaking when x_C = x_T: 1.5t² = 12t, so t = 0 (start) or t = 8 s.2
Distance = 12 x 8 = 96 m.1
The car then moves at 24 m/s, twice the truck speed; the gap was largest at t = 4 s when speeds were equal (24 m).1
Total: 5 marks5

Answer: 96 m (at t = 8 s)

Fast method: Relative motion: the car must make up zero net distance, so average speed of the car over the interval equals 12 m/s; with the car average speed = (1/2)(3t), t = 8 s.

Sanity check: Final car speed is 24 m/s, exactly double the truck, as required when starting from rest and meeting with equal average speeds. Distance 96 m = 12 x 8.

Example 8 (hard)

A car moving at 72 km/h applies brakes and decelerates uniformly at 5 m/s². Find the distance it covers in the first 6 s after the brakes are applied.

Marks-style solution of example 8
StepMarks
Convert: 72 km/h = 20 m/s. Stopping time = 20/5 = 4 s, which is less than 6 s.2
Distance to stop: v² = u² + 2as gives s = 400/(2 x 5) = 40 m.2
After 4 s the car stays at rest, so distance in 6 s = 40 m.1
Total: 5 marks5

Answer: 40 m

Fast method: Always find the stopping time first; if the asked time exceeds it, use the stopping distance u²/(2a).

Sanity check: Distance 40 m lies between the 30 m trap value and the 80 m a car at constant 20 m/s would cover in 4 s. Average speed during braking = 10 m/s over 4 s = 40 m.

Typical trap: Plugging t = 6 into s = ut - (1/2)at² gives 120 - 90 = 30 m, which describes a car that has reversed. The car stops at 4 s and stays there.

Formulas and units

Formula and unit box for Motion in a straight line
ResultFormulaValid whenUnits or noteWorked example
Velocity-time relationv = u + atconstant acceleration along a straight linem/sExample 3
Displacements = ut + (1/2)at²constant acceleration along a straight linemExample 1
Velocity-displacement relationv² = u² + 2asconstant acceleration along a straight linem²/s²Example 8
Distance in the nth seconds_n = u + a(n - 1/2)constant acceleration; equals distance only if direction does not reversemExample 4
Average velocity (constant a)v_avg = (u + v)/2 = s/tconstant acceleration along a straight linem/snone
Calculus formsv = dx/dt; a = dv/dt = v dv/dxany straight-line motion; x, v signed along the linem/s (m/s²)Example 6
Vertical throw from groundH = u²/(2g); T = 2u/gthrown up from ground and returning to it; constant g, no air resistancem (s)Example 3
Equal-distance average speedv_avg = 2 v1 v2/(v1 + v2)equal distances at constant speeds v1 and v2m/snone

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Using s = ut + (1/2)at² for distance after the body has turned back or stopped. Why it tempts: The formula gives displacement and looks universal; the option computed that way is always offered.
  • Taking g as positive when up is the positive direction. Why it tempts: g is quoted as 10 m/s² with no sign, so the minus is easy to drop, and the answer then looks plausible.
  • Averaging two speeds as (v1 + v2)/2 when equal distances are covered at each speed. Why it tempts: The arithmetic mean is the first thing that comes to mind; it holds only for equal times.
  • Treating acceleration as zero at the top of a vertical throw. Why it tempts: The body stops for an instant, so students assume motion equations stop too; velocity is zero, acceleration is still g downward.
  • Reading the area under an x-t graph or the slope of a v-t graph as a displacement or velocity. Why it tempts: The shapes look the same on every graph; only the axes tell you which operation gives which quantity.

Time per question and fast method

Target: about 75 seconds per question.

Name the positive direction, list u, v, a, s, t and pick the equation that leaves out the unknown you do not need. For chase problems write both positions in terms of t and equate. For graph questions use areas of triangles and trapezoids instead of integrating. Check the stopping time before using a formula on a braking body.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. A car starts from rest with acceleration 3 m/s². How far does it travel in 4 s?
Show the answer

Answer: B: 24 m. s = (1/2)(3)(16) = 24 m. Option C forgets the factor one half.

Question 2. A stone is thrown up at 30 m/s. Take g = 10 m/s². What is the maximum height?
Show the answer

Answer: C: 45 m. H = u²/(2g) = 900/20 = 45 m.

Question 3. A body travels half the distance at 20 m/s and the other half at 30 m/s. What is the average speed?
Show the answer

Answer: B: 24 m/s. Equal distances: harmonic mean = 2(20)(30)/(50) = 24 m/s. Option A is the arithmetic mean, true only for equal times.

Question 4. On a velocity-time graph, the area under the curve represents which quantity?
Show the answer

Answer: B: Displacement. The integral of v dt is the displacement; slope would give acceleration.

Question 5. What is the acceleration of a ball at the top of its vertical throw?
Show the answer

Answer: C: g downward. Gravity acts throughout; only the velocity is zero at the top.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Sign conventions and what the signs mean

Every kinematic equation is a signed equation. Once the positive direction is fixed, a quantity pointing the other way carries a minus sign. Velocity and acceleration with the same sign mean speeding up; opposite signs mean slowing down. A common slip is writing a = +10 m/s² for a stone thrown up. Units: x in m, v in m/s, a in m/s². Dimensions of the equations check at once: every term in s = ut + (1/2)at² has dimension of length. A negative displacement is perfectly valid and only says the body ended on the negative side of its start.

Free fall, turning points and symmetry

For a body thrown up from the ground and landing at the same level, the time up equals the time down, and the speed at any height is equal going up and going down. The maximum height is u²/(2g) and the total time is 2u/g. If the throw starts from the top of a building of height h and lands below, the displacement is -h, so -h = ut - 5t² is a quadratic with one positive root. The distance covered in successive equal intervals from rest is in the ratio 1 : 3 : 5 : 7, which gives fast shortcuts for dropped objects: in the last second of a fall the distance is g(T - 1/2).

Graph reading and area rules

The x-t graph of a body cannot have two values at one time, and cannot be vertical. A v-t graph can cross the axis; the crossing marks a turning point. Average velocity over an interval is the slope of the chord on x-t, while instantaneous velocity is the slope of the tangent. Average speed over an interval is the area between the |v|-t curve and the time axis, divided by the time. For constant acceleration, average velocity is (u + v)/2, which fails for variable acceleration. The a-t graph gives change of velocity as area under it, so v - u equals that area.

Calculus forms and the trick of v as a function of x

If v is given as a function of position, use a = v dv/dx rather than dv/dt. If a = -kv, integrate to find v(x) = u - kx, which is linear in x. If a is given in terms of t, v = u + integral of a dt. Constants of integration come from the initial conditions: write them down before integrating. For a polynomial x(t) the body is momentarily at rest where dx/dt = 0, and it is turning around only if the sign of velocity changes across the zero. A double root of v does not mean a turning point.

What examiners test and edge cases

Common JEE Main items: distance in the nth second; a stone dropped and one thrown at the same time (relative acceleration is zero, so the gap changes at constant rate); stopping distance and reaction time; v-t areas; two vehicles with different accelerations meeting once or twice; and total distance versus displacement for a polynomial x(t). Edge cases: a braking vehicle must not be allowed to reverse in your equations (check the stopping time first); the average of two speeds is wrong for equal distances (use harmonic mean, 2 v1 v2/(v1 + v2)); and the nth-second distance equals displacement only if there is no turning point inside that second.

Memory hook

Suppose you are on a long straight road in a bus that is stopped at a signal, and the driver pulls away smoothly for ten seconds, then holds a steady speed before braking gently to the next stop.

  1. While the speed is rising by the same amount each second, the distance covered each second keeps growing; it is the same pattern as a dropped coin, slow at first and faster later.
  2. On the steady stretch the milestones go past at equal gaps of time, so distance is simply speed times time.
  3. During braking the speed falls by equal steps; the bus covers less in each later second, and the stopping distance depends on the square of the speed it began with.

One straight line, a chosen positive direction, and equal speed changes in equal times is exactly constant acceleration.

Pick a direction, keep the signs, and split the journey wherever the acceleration changes.

Revision card

Try to answer each without looking above.

  1. State the three equations of motion for constant acceleration and when each applies.
  2. What is the difference between displacement and distance, and how do you find distance when the body turns?
  3. What do the slope and the area on a v-t graph represent?
  4. Write the distance in the nth second and explain where it comes from.
  5. What is the acceleration and velocity at the top of a vertical throw?
  6. Why must you check the stopping time of a braking vehicle before using the equations?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (see content/reviews/scope-audit-2026-11-20.md)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 2; fixed: 2
  • Report: content/reviews/learn2-kin-2026-11-20.md

Textbook references

  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 2: Motion in a Straight Line, 2.3 ACCELERATION (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 2: Motion in a Straight Line, 2.4 KINEMATIC EQUATIONS FOR UNIFORMLY ACCELERATED MOTION (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 2: Motion in a Straight Line, Points to ponder POINTS TO PONDER (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 2: Motion in a Straight Line, 2.2 INSTANTANEOUS VELOCITY AND SPEED (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 2: Motion in a Straight Line, Example 2.4 Free-fall (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 2: Motion in a Straight Line, Summary SUMMARY (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 2 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
  • NCERT Class 11 Physics, Motion in a Straight Line (read as a reference for scope, content written fresh)

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.