Spring and Pendulum Oscillations: JEE Main Notes
Reviewed Last updated 2026-11-20. Syllabus topic: Spring and pendulum oscillations.
In short. Spring-mass: T = 2 pi sqrt(m/k), independent of g and amplitude. Simple pendulum, small angles: T = 2 pi sqrt(L/g), independent of mass and amplitude. Springs in parallel add force constants, springs in series add compliances 1/k.
- Spring: F = -k x gives omega = sqrt(k/m), T = 2 pi sqrt(m/k); a vertical spring has the same T, with equilibrium shifted down by m g/k.
- Parallel springs: k = k1 + k2. Series springs: 1/k = 1/k1 + 1/k2. Cut spring: k is inversely proportional to the length of the piece.
- Simple pendulum, small angle: T = 2 pi sqrt(L/g), found from restoring force m g sin(theta) approximately m g theta; T is independent of the mass of the bob.
- In an accelerating frame use g_eff: lift accelerating up gives g + a, down gives g - a, horizontal acceleration gives sqrt(g² + a²).
Syllabus line: Oscillations and Waves Oscillations and periodic motion: time period, frequency, displacement as a function of time, periodic functions. Simple harmonic motion (S.H.M.) and its equation, phase, oscillations of a spring: restoring force and force constant, energy in S.H.M.: kinetic and potential energies, simple pendulum: derivation of expression for its time period. Wave motion, longitudinal and transverse waves, speed of the travelling wave, displacement relation for a progressive wave, principle of superposition of waves, reflection of waves, standing waves in strings and organ pipes, fundamental mode and harmonics, beats. (NTA JEE (Main) 2026 syllabus, Physics, Unit 10 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Simple harmonic motion and energy: This page applies a = -omega² x to two systems. Read this first if omega, T and the SHM equation are not secure.
- Newton's laws and free-body diagrams: The restoring force and the pseudo force in a lift need free-body diagrams. Read this first if resolving forces is slow.
- Potential energy, conservation of energy and vertical circle: Spring energy (1/2) k x² comes from here. Read this first if elastic potential energy is unfamiliar.
Related topics
- Oscillations and Waves (lesson planned)
- Simple harmonic motion and energy
- Wave motion and superposition
- Newton's laws and free-body diagrams
The concept step by step
Restoring force and force constant of a spring
A light spring stretched or compressed by x from its natural length exerts F = -k x on the body, within the elastic limit (Hooke law). The force constant k, in N/m, is the force per unit extension; a stiffer spring has larger k. The potential energy stored is (1/2) k x². The minus sign says the force always points back to the natural length, which is exactly the condition for SHM.
Time period of a spring-mass system
Newton second law gives m d2x/dt2 = -k x, so a = -(k/m) x and omega² = k/m. Hence omega = sqrt(k/m) and T = 2 pi sqrt(m/k). A heavier mass or a softer spring gives a longer period. T does not depend on the amplitude, and for a vertical spring it does not depend on g: gravity only shifts the equilibrium position down by m g/k, and the body oscillates about the new position with the same T.
Combining springs: parallel, series and cutting
Springs sharing the same extension, side by side, are in parallel: the forces add, so k = k1 + k2. Springs joined end to end carry the same force and their extensions add, so 1/k = 1/k1 + 1/k2. A spring cut into pieces: a piece of length L/n of a spring of constant k has force constant n k, since the force constant is inversely proportional to the natural length of the same wire. A shorter piece is stiffer, so its frequency is higher.
The simple pendulum: derivation
A bob of mass m on a light inextensible string of length L, displaced by a small angle theta, feels a restoring tangential force m g sin(theta) towards the lowest point. For small theta (a few degrees, theta in radian) sin(theta) is nearly theta, and the arc displacement is x = L theta, so F = -(m g/L) x. This is SHM with k = m g/L, so omega = sqrt(g/L) and T = 2 pi sqrt(L/g). The mass cancels: T is independent of the bob mass. The string tension does not enter the tangential equation.
Effective gravity in accelerated frames
In a frame with acceleration a, a body feels a pseudo force of magnitude m a opposite to a, in addition to m g. The pendulum equilibrium lies along the effective gravity g_eff, and T = 2 pi sqrt(L/g_eff). In a lift accelerating upward g_eff = g + a; accelerating downward g_eff = g - a (and T tends to infinity in free fall, a = g). For a coach with horizontal acceleration a, the two are perpendicular, so g_eff = sqrt(g² + a²). A spring-mass system on a horizontal surface is unaffected by such accelerations of the frame, apart from a shift of the equilibrium.
Energy and amplitude for spring oscillators
The total energy of a spring oscillator is (1/2) k A². If the body is struck or an extra mass is added when it passes the mean position, apply momentum conservation there (the spring force is zero at that instant); the new omega follows from the new mass, and the new amplitude is the new speed divided by the new omega. If the extra mass is added at an extreme, the velocity is zero, so the amplitude does not change.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
A block of mass 0.40 kg is attached to a spring of force constant 40 N/m on a smooth horizontal table. Find the angular frequency and the time period.
| Step | Marks |
|---|---|
| omega = sqrt(k/m) = sqrt(40/0.40) = sqrt(100) = 10 rad/s. | 1 |
| T = 2 pi/omega = 2 pi/10. | 1 |
| T = 0.628 s. | 1 |
| Total: 3 marks | 3 |
Answer: omega = 10 rad/s, T = 0.628 s
Fast method: k/m = 100, so omega = 10; T = 0.628 s.
Sanity check: Units: N/m divided by kg is (kg m/s²)/(m kg) = s⁻2, so the root is rad/s. A 0.4 kg block on a moderately stiff spring oscillating a little more than once a second is reasonable.
Example 2 (easy)
A force of 5.0 N stretches a spring by 0.020 m. A body of mass 1.0 kg is attached to it and set oscillating. Find the frequency in hertz.
| Step | Marks |
|---|---|
| k = F/x = 5.0/0.020 = 250 N/m. | 1 |
| omega = sqrt(k/m) = sqrt(250/1.0) = 15.81 rad/s. | 1 |
| f = omega/(2 pi) = 2.52 Hz. | 1 |
| Total: 3 marks | 3 |
Answer: f = 2.52 Hz
Fast method: f = (1/2 pi) sqrt(250) = 15.81/6.283 = 2.52 Hz.
Sanity check: Units: N/(m) = N/m for k; the frequency of a 1 kg mass on a 250 N/m spring is of the order of a few hertz. Doubling the mass would lower f by a factor sqrt(2).
Example 3 (medium)
A block of mass 2.0 kg is attached to two springs of force constants 200 N/m and 300 N/m. Find the time period when the springs are (a) in parallel, (b) in series. Give the answer to (a) in seconds as the check value.
| Step | Marks |
|---|---|
| Parallel: k = 200 + 300 = 500 N/m, so T = 2 pi sqrt(2.0/500) = 0.397 s. | 2 |
| Series: 1/k = 1/200 + 1/300 = 5/600, so k = 120 N/m. | 1 |
| T (series) = 2 pi sqrt(2.0/120) = 0.811 s. | 1 |
| (a) 0.397 s, (b) 0.811 s. | 1 |
| Total: 5 marks | 5 |
Answer: (a) 0.397 s; (b) 0.811 s
Fast method: Parallel k = 500, series k = 200 x 300/500 = 120; T = 2 pi sqrt(2/k).
Sanity check: Series k = 120 is below both 200 and 300 as it must be, and parallel k = 500 is above both; so T (series) > T (parallel), 0.811 s > 0.397 s, consistent.
Example 4 (medium)
Find the time period of a simple pendulum of length 0.90 m at a place where g = 9.8 m/s², and the length of a seconds pendulum (T = 2.0 s) at the same place. Give the period in seconds as the check value.
| Step | Marks |
|---|---|
| T = 2 pi sqrt(L/g) = 2 pi sqrt(0.90/9.8). | 1 |
| sqrt(0.09184) = 0.3030, so T = 1.90 s. | 1 |
| Seconds pendulum: L = g T²/(4 pi²) = 9.8 x 4/39.48 = 0.993 m. | 2 |
| Total: 4 marks | 4 |
Answer: T = 1.90 s; seconds pendulum length 0.993 m
Fast method: T = 2 pi sqrt(L/g); and L = g/pi² for T = 2 s (9.8/9.87 = 0.993 m).
Sanity check: Units: s from sqrt(m/(m/s²)). A 0.9 m pendulum swings in a bit under 2 s, and a 1 m pendulum is almost exactly a seconds pendulum, which agrees with 0.993 m.
Example 5 (medium)
A block of mass 0.50 kg hangs from a vertical spring of constant 50 N/m on Earth (g = 9.8 m/s²). The same arrangement is taken to the Moon (g = 1.6 m/s²). Find the time period and the equilibrium extension on each. Give the period in seconds as the check value.
| Step | Marks |
|---|---|
| Period: T = 2 pi sqrt(m/k) = 2 pi sqrt(0.50/50) = 0.628 s. It contains no g, so it is the same on the Moon. | 2 |
| Earth extension: m g/k = 0.50 x 9.8/50 = 0.098 m. | 1 |
| Moon extension: 0.50 x 1.6/50 = 0.016 m. | 1 |
| T = 0.628 s on both; extensions 0.098 m and 0.016 m. | 1 |
| Total: 5 marks | 5 |
Answer: T = 0.628 s on both; extension 0.098 m (Earth), 0.016 m (Moon)
Fast method: g shifts the equilibrium (x0 = m g/k) but not the period: T = 2 pi sqrt(m/k) = 0.628 s everywhere.
Sanity check: Check with the alternative form T = 2 pi sqrt(x0/g): Earth 2 pi sqrt(0.098/9.8) = 0.628 s; Moon 2 pi sqrt(0.016/1.6) = 0.628 s. Both agree.
Example 6 (hard, multi-step)
A simple pendulum of length 1.0 m is suspended in a lift. Take g = 10 m/s². Find its period when the lift accelerates upward at 5.0 m/s², and the ratio of this period to the period in a lift at rest. Give the period in seconds as the check value.
| Step | Marks |
|---|---|
| Upward acceleration: effective gravity g_eff = g + a = 15 m/s². | 2 |
| T = 2 pi sqrt(L/g_eff) = 2 pi sqrt(1.0/15) = 1.62 s. | 1 |
| At rest T0 = 2 pi sqrt(1.0/10) = 1.99 s. | 1 |
| Ratio T/T0 = sqrt(10/15) = 0.816; T = 1.62 s. | 1 |
| Total: 5 marks | 5 |
Answer: T = 1.62 s; T/T0 = 0.816
Fast method: T proportional to 1/sqrt(g_eff): T/T0 = sqrt(10/15) = 0.816, and T0 = 1.987 s.
Sanity check: The pendulum feels heavier, so it swings faster and T falls, as 1.62 s < 1.99 s shows. Limiting case: in a lift in free fall (a = g downward) g_eff = 0 and T would be infinite.
Example 7 (hard, multi-step)
A block of mass m = 1.0 kg is attached to a spring of force constant k = 100 N/m on a smooth horizontal table and oscillates with amplitude 0.10 m. As it passes through the mean position, a lump of putty of mass 1.0 kg falls vertically onto it and sticks. Find the new amplitude in metres.
| Step | Marks |
|---|---|
| Just before: speed at the mean position v = A sqrt(k/m) = 0.10 x 10 = 1.0 m/s. | 1 |
| Horizontal momentum is conserved in the sticking: (1.0)(1.0) = (2.0) v', so v' = 0.50 m/s. | 2 |
| New angular frequency omega' = sqrt(k/(2m)) = sqrt(50) = 7.07 rad/s. | 1 |
| New amplitude A' = v'/omega' = 0.50/7.07 = 0.0707 m. | 1 |
| Total: 5 marks | 5 |
Answer: A' = 0.0707 m (A/sqrt(2))
Fast method: Doubling the mass at the mean position: A' = A sqrt(m/(m + m')) = 0.10/sqrt(2) = 0.0707 m.
Sanity check: Units: m/s divided by rad/s gives m. Energy check: before (1/2) k A² = 0.50 J, after (1/2) k A'² = 0.25 J; half the energy is lost in the inelastic sticking, as for a perfectly inelastic collision of equal masses. If the putty fell at an extreme position the amplitude would be unchanged.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Hooke law | F = -k x; spring energy U = (1/2) k x² | ideal spring within the elastic limit; x from natural length | N (J; k in N/m) | Example 2 |
| Spring-mass period | T = 2 pi sqrt(m/k); omega = sqrt(k/m) | ideal massless spring, no friction, within Hooke range | s (rad/s) | Example 1 |
| Parallel springs | k = k1 + k2 (also block between two springs) | both springs stretched by the same displacement | N/m | Example 3 |
| Series springs | 1/k = 1/k1 + 1/k2, k = k1 k2/(k1 + k2) | springs joined end to end, same force in both | N/m | Example 3 |
| Cut spring | piece of length L/n has k_piece = n k | uniform spring cut into equal pieces | N/m | none |
| Vertical spring | k x0 = m g; T = 2 pi sqrt(x0/g) | ideal spring hanging vertically, block at equilibrium | m (s) | Example 5 |
| Simple pendulum (small angle) | T = 2 pi sqrt(L/g) | small angle (under about 10 degrees), point mass, light string | s (with L in m) | Example 4 |
| Effective gravity | lift up/down: g + a, g - a; horizontal a: sqrt(g² + a²) | pendulum in a frame accelerating with a; g_eff replaces g | m/s² | Example 6 |
| Seconds pendulum | T = 2 s; L = g/pi² (about 0.99 m) | small amplitude; g about 9.8 m/s² | m | Example 4 |
| Small changes | dT/T = (1/2) dL/L - (1/2) dg/g | small changes in L and g (first-order) | dimensionless | none |
Common mistakes and speed
- Taking the spring period as 2 pi sqrt(k/m) (inverted) or forgetting 2 pi. Why it tempts: Both forms look familiar from omega = sqrt(k/m); options built from the inverted ratio and the missing 2 pi are always present and are plausible-looking numbers.
- Adding force constants for springs in series, or taking the reciprocal sum for springs in parallel. Why it tempts: The series-parallel rule for resistors is the opposite of that for springs, and capacitors follow the springs; mixing the rules is easy under time pressure.
- Saying a vertical spring oscillator has a different period on another planet. Why it tempts: The pendulum formula contains g, and weight appears in the vertical spring problem; but g cancels because it only shifts the equilibrium.
- Adding g and a for a pendulum in a horizontally accelerating vehicle. Why it tempts: In a lift the accelerations add or subtract; in a coach they are perpendicular and combine as sqrt(g² + a²). The wrong sum 17.5 against the right 12.5 is a tempting option.
- Using the segment length of a cut spring directly in k = constant. Why it tempts: A piece of the spring seems to be the same spring; but k is inversely proportional to the length, so a quarter piece is four times stiffer.
Time per question and fast method
Target: about 90 seconds per question.
Write T = 2 pi sqrt(m/k) or 2 pi sqrt(L/g) first and think only in ratios: T goes as sqrt(m), 1/sqrt(k), sqrt(L), 1/sqrt(g_eff). For springs, simplify to one k before doing arithmetic (series: product over sum; parallel: sum). For a pendulum in an accelerated frame, find g_eff as a vector sum before touching the formula. For a vertical spring with extension given, use T = 2 pi sqrt(x0/g).
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 6 correct. Pick an option for each question.
Practice
- A block of mass 0.50 kg attached to a light spring of force constant 200 N/m oscillates on a smooth… Verified (T1)
- A block of mass 2.0 kg is attached to two light springs of force constants 300 N/m and 600 N/m joined end to… Verified (T1)
- A simple pendulum of length 1.0 m hangs from the ceiling of a railway coach that moves on a straight level… Verified (T1)
- A block hangs at rest from a light vertical spring, which is stretched by 0.040 m in equilibrium. The block… Verified (T1)
- A light spring of force constant 100 N/m is cut into two pieces whose lengths are in the ratio 1 : 3. A block… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Spring-mass system: horizontal, vertical, inclined
For a horizontal smooth surface, T = 2 pi sqrt(m/k). For a vertical spring, in equilibrium k x0 = m g, so T = 2 pi sqrt(x0/g) is a useful form when the extension is given and m, k are not. For a block on a smooth incline of any angle, the equilibrium extension is m g sin(alpha)/k and the period is again 2 pi sqrt(m/k): only the equilibrium shifts. The motion is SHM about the equilibrium position, measured from which the displacement is x. A massless spring is assumed; a spring with mass would contribute an extra effective mass and is outside this chapter. Check units: k in N/m, m in kg gives s² inside the root.
Series, parallel and cut springs; two-spring arrangements
Parallel: both springs stretch by the same amount, k = k1 + k2. Series: the same force acts on both, extensions add, k = k1 k2/(k1 + k2); the result is less than the smaller of the two. A block between two springs fixed to opposite walls (k1 on one side, k2 on the other) behaves as parallel springs: a displacement stretches one and compresses the other, and both forces point back, so k = k1 + k2. A spring of constant k cut in the ratio a : b gives pieces of constant k (a + b)/a and k (a + b)/b; the shorter piece has the larger constant. If it is cut into n equal parts each piece has n k, and joining the pieces in parallel gives n² k.
Pendulum: validity, variations and standard values
T = 2 pi sqrt(L/g) holds for small angular amplitude and a point-like bob on a string of negligible mass; L is the distance from the suspension point to the centre of the bob. For large amplitudes T increases slightly. T is independent of mass and amplitude (small), proportional to sqrt(L), and inversely proportional to sqrt(g): a pendulum of length increased by 21 percent has its period increased by 10 percent; one taken to a planet with g one quarter has T doubled. The seconds pendulum has T = 2 s and length g/pi², about 0.99 m for g = 9.8 m/s². In a freely falling lift or in orbit the effective gravity is zero and the pendulum does not oscillate (T tends to infinity). If the bob is a charged sphere in a vertical electric field the same g_eff idea applies with an extra force q E/m.
Pendulum in a lift, car or liquid: effective gravity
The rule is one line: find the net uniform "gravity" the bob sees in its own frame, then T = 2 pi sqrt(L/g_eff). Lift going up with acceleration a or going down with deceleration a: g_eff = g + a. Lift going down with acceleration a or up with deceleration a: g_eff = g - a. Constant velocity: g_eff = g. Horizontal acceleration: g_eff = sqrt(g² + a²), and the pendulum rests tilted at tan(theta) = a/g from the vertical. The sign of the velocity does not matter, only the direction of the acceleration. A common trap is adding g and a when the two are perpendicular.
What examiners test and edge cases
Typical items: T of a spring-mass system from m and k; effect of changing mass (T proportional to sqrt(m)); series and parallel combinations; cut-spring frequencies and their ratios; vertical spring from the extension; frequency of a block between two springs; pendulum period with changed length or g; pendulum in a lift or accelerating coach; seconds pendulum length; time lost or gained by a pendulum clock when L or g changes (fractional change of T is half the fractional change of L for small changes); amplitude after a mass is added at the mean position. Edge cases: the spring itself is taken as massless, the pendulum string as inextensible; for the pendulum the small-angle limit is part of the question even when unstated; always check that m is in kg and extensions in metres.
Memory hook
Suppose a heavy steel trunk is hung from a spring balance (kata) in a shop, and the shopkeeper nudges it so that it bobs up and down.
- The balance reads the trunk weight only when it is still; as it bobs, the reading rises and falls around that value.
- A heavier trunk bobs more slowly; if the shopkeeper uses a stiffer spring, the same trunk bobs faster.
- Taken to a hill station where gravity is a little weaker, the bobbing period of the spring does not change, though the trunk hangs a little higher.
T = 2 pi sqrt(m/k): heavier mass slows, stiffer spring speeds, and g does not appear, since it only shifts the equilibrium. A pendulum, in contrast, depends on g through T = 2 pi sqrt(L/g).
Spring period listens to mass and stiffness; pendulum period listens to length and gravity.
Revision card
Try to answer each without looking above.
- Write the time period of a spring-mass system and state what it does not depend on.
- How do force constants combine in series, in parallel and when a spring is cut?
- Derive T = 2 pi sqrt(L/g) from the restoring force on a pendulum bob and state the approximation used.
- Give g_eff for a pendulum in a lift going up, going down, and in a horizontally accelerating coach.
- What is the length of a seconds pendulum for g = 9.8 m/s²?
- A mass sticks on a spring oscillator at the mean position: how do omega and amplitude change?
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 1; fixed: 1
- Report: content/reviews/learn4-osc-2026-11-20.md
Textbook references
- NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 13: Oscillations, 13.7 Energy in simple harmonic motion (read 2026-11-22)
- NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 13: Oscillations, Summary Summary (read 2026-11-22)
- NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 13: Oscillations, Points to ponder Points to ponder (read 2026-11-22)
- NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 13: Oscillations, 13.8 The Simple Pendulum (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 10 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
- NTA JEE (Main) 2026 syllabus, Physics, Unit 10 (https://jeemain.nta.nic.in/document/syllabus-2026/), read for scope
- Standard results of school-level oscillations and waves; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.