EngineeringRise

Newton's Laws and Free-Body Diagrams: JEE Main Notes

Reviewed Last updated 2026-11-20. Syllabus topic: Newton's laws and free-body diagrams.

In short. Newton second law, F_net = m a, is applied to one body at a time using a free-body diagram that shows only the forces acting on that body. In a lift with upward acceleration a the weighing machine reads m (g + a); connected bodies share one acceleration.

  • Draw one body, show only forces acting on it, pick axes, then write F_net = m a along each axis.
  • Action and reaction act on different bodies, so they never cancel inside one free-body diagram.
  • Lift reading N = m (g + a) with a upward positive; only the direction of acceleration matters, not the velocity.
  • For blocks pushed together or tied by a string, find a = F/(total mass) first, then isolate one block for the contact force or tension.
  • In equilibrium the forces on a body sum to zero; for three concurrent forces Lami theorem gives F1/sin(A1) = F2/sin(A2) = F3/sin(A3), each angle opposite its force.

Syllabus line: Laws of Motion Force and inertia, Newton's first law of motion, momentum, Newton's second Law of motion, impulse, Newton's third Law of motion. Law of conservation of linear momentum and its applications, equilibrium of concurrent forces. Static and Kinetic friction, laws of friction, rolling friction. Dynamics of uniform circular motion, centripetal force and its applications: vehicle on a level circular road, vehicle on a banked road. (NTA JEE (Main) 2026 syllabus, Physics, Unit 3 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

Related topics

The concept step by step

  1. Force, mass and the second law

    A force is a push or pull measured in newton, where 1 N is the force that gives 1 kg an acceleration of 1 m/s². Newton second law says the net force on a body equals its mass times its acceleration, F_net = m a. If the net force is zero the velocity does not change. Mass measures how hard the body is to accelerate. Weight is the pull of the Earth, m g, and is a force in newton, with g = 10 m/s² in this course.

  2. First law and inertia

    Newton first law says a body at rest stays at rest and a body in motion keeps its velocity in a straight line unless a net external force acts. This property is inertia, and mass is its measure: a heavier body is harder to start, stop or turn. The law also defines an inertial frame, one in which a body with no net force has no acceleration. A bus braking suddenly throws you forward because your body tends to keep its velocity, not because a force pushes you forward.

  3. Equilibrium of concurrent forces and Lami theorem

    Forces whose lines of action meet at a point are concurrent. A body is in translational equilibrium when their vector sum is zero, so each component sums to zero. For three concurrent forces in equilibrium, Lami theorem gives F1/sin(A1) = F2/sin(A2) = F3/sin(A3), where A1 is the angle between the other two forces F2 and F3, and so on. For a 100 N load held by two equal strings 60 degrees apart, each tension is 100 x sin(150)/sin(60) = 57.7 N. Use resolving components when there are more than three forces.

  4. Draw the free-body diagram first

    Pick one body and draw only the forces that act on it: weight down, normal force from a surface, tension along a string, spring force, friction and any applied force. Do not draw the forces this body exerts on others. Choose one axis along the direction of acceleration and one perpendicular to it. Then write F_net = m a along each axis. The diagram is where most marks are earned, so draw it before any number is written.

  5. Action and reaction live on different bodies

    The third law says that if A pushes on B, then B pushes back on A with an equal force in the opposite direction. These two forces act on different bodies, so they never appear together in one free-body diagram and never cancel. A book on a table gets an upward normal force from the table, and the table gets a downward push from the book. That downward push belongs to the diagram of the table.

  6. Connected bodies: system first, then one body

    If blocks touch or are tied by a light string and move together, they share one acceleration. Treat all of them as a single system to find a = F/(total mass), because the internal contact forces and tensions cancel in the system. Then isolate one block to find the contact force or tension. Example: 4 kg and 6 kg tied together and the 6 kg block pulled by 50 N give a = 5 m/s² and a string tension of 4 x 5 = 20 N.

  7. Lifts and apparent weight

    A weighing machine shows the normal force N on the person. Take upward as positive: N - m g = m a, so N = m (g + a). When the lift accelerates upward N is larger than m g. When it accelerates downward N is smaller. In free fall the reading is zero. Only the acceleration matters: a lift moving up but slowing down has a downward acceleration, so the reading is below m g even though it is moving up.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

A man of mass 50 kg stands in a lift that is accelerating downward at 3 m/s². Find the reading of the weighing machine in newtons. Take g = 10 m/s².

Marks-style solution of example 1
StepMarks
Take down as positive for this lift: m g - N = m a.1
N = m (g - a) = 50 x (10 - 3).1
N = 350 N.1
Total: 3 marks3

Answer: 350 N (equivalent to a reading of 35 kg)

Fast method: Scale the weight 500 N by (g - a)/g = 7/10 to get 350 N.

Sanity check: Units: kg x m/s² gives newtons. Limiting case: a = 10 m/s² gives zero reading (free fall) and a = 0 gives 500 N.

Example 2 (easy)

Blocks of mass 4 kg and 6 kg are joined by a light string on a smooth horizontal table. A horizontal force of 50 N pulls the 6 kg block directly away from the 4 kg block. Find the tension in the string.

Marks-style solution of example 2
StepMarks
System: a = 50/(4 + 6) = 5 m/s².1
Only the string pulls the 4 kg block: T = 4 x 5.2
T = 20 N. Check on the 6 kg block: 50 - T = 6 x 5 = 30, so T = 20 N.1
Total: 4 marks4

Answer: 20 N

Fast method: T = F x (mass on the far side of the string from the pull)/(total mass) = 50 x 4/10 = 20 N.

Sanity check: The tension must be below the applied 50 N, and a fraction 4/10 of it, which is 20 N. Units are newtons.

Example 3 (medium)

A lift is moving upward at 4 m/s and is slowing down at 2 m/s² as it approaches a floor. A 60 kg man stands in it. Find the weighing machine reading in newtons. Take g = 10 m/s².

Marks-style solution of example 3
StepMarks
Moving up but slowing means the acceleration points downward, magnitude 2 m/s².1
N = m (g - a) = 60 x 8.1
N = 480 N.1
Total: 3 marks3

Answer: 480 N

Fast method: Slowing while going up is the same as accelerating down: reading below 600 N by 60 x 2 = 120 N.

Sanity check: Reading 480 N is below the weight 600 N, as expected for a downward acceleration; the 4 m/s speed does not enter at all.

Typical trap: The lift moves upward, so students add the acceleration and answer 720 N. Direction of velocity is irrelevant; only the direction of acceleration decides.

Example 4 (hard, multi-step)

Block X of mass 3 kg is hung from a ceiling by a light string, and block Y of mass 2 kg is hung below X by another light string. The upper string is pulled upward so that both blocks accelerate upward at 2 m/s². Find the tension in the lower string and the force in the upper string. Take g = 10 m/s².

Marks-style solution of example 4
StepMarks
Lower string supports Y only: T2 - 20 = 2 x 2, so T2 = 24 N.2
Upper string supports X and Y together (total 5 kg): T1 - 50 = 5 x 2, so T1 = 60 N.2
Check on X alone: T1 - T2 - 30 = 3 x 2 gives 60 - 24 - 30 = 6. Matches.2
Final answer: T2 = 24 N and T1 = 60 N.1
Total: 7 marks7

Answer: Lower string 24 N, upper string 60 N

Fast method: Each string carries m (g + a) for everything hanging below it: 2 x 12 = 24 N and 5 x 12 = 60 N.

Sanity check: At rest the tensions would be 20 N and 50 N; with an upward acceleration both rise by the same factor 12/10, giving 24 N and 60 N.

Typical trap: Writing T1 = 30 + 20 = weight of both blocks, or using only the weight of the block that the string is attached to, ignores the upward acceleration of the load below.

Example 5 (easy)

Three forces act on a body in equilibrium: 6 N towards the east, 8 N towards the north and a third force F. Find the magnitude and direction of F.

Marks-style solution of example 5
StepMarks
Equilibrium needs a zero vector sum, so F is equal and opposite to the resultant of 6 N east and 8 N north.1
Resultant magnitude = sqrt(6² + 8²) = 10 N, at 53 degrees north of east (tan = 8/6).1
So F = 10 N, directed 53 degrees south of west.1
Total: 3 marks3

Answer: 10 N, 53 degrees south of west

Fast method: The 6-8-10 triangle: F = 10 N, opposite to the resultant.

Sanity check: F = 10 N is between the larger force 8 N and the sum 14 N, as the resultant of two perpendicular forces must be. Components: 10 cos(53) = 6 and 10 sin(53) = 8 cancel the given pair.

Typical trap: Adding the magnitudes, 6 + 8 = 14 N. The forces are perpendicular, so they add by Pythagoras.

Example 6 (easy)

A body of mass 4 kg on a smooth horizontal surface is acted on by two horizontal forces, 5 N towards the east and 12 N towards the north. Find its acceleration.

Marks-style solution of example 6
StepMarks
Net force = sqrt(5² + 12²) = 13 N, since the forces are perpendicular.1
a = F_net/m = 13/4 = 3.25 m/s².1
Direction: arctan(12/5), about 67 degrees north of east, along the resultant.1
Total: 3 marks3

Answer: 3.25 m/s² at 67 degrees north of east

Fast method: Resultant 13 N from the 5-12-13 triangle, then divide by 4 kg.

Sanity check: Units: N/kg = m/s². Components of acceleration 1.25 and 3 m/s² combine to 3.25 m/s².

Example 7 (hard, multi-step)

A load of 100 N hangs from two strings meeting at a knot. One string makes 30 degrees and the other 60 degrees with the horizontal, on opposite sides, so the strings are perpendicular. Find the tension in each string.

Marks-style solution of example 7
StepMarks
Horizontal balance: T1 cos(30) = T2 cos(60), so T2 = T1 x 1.732.2
Vertical balance: T1 sin(30) + T2 sin(60) = 100, so 0.5 T1 + 1.5 T1 = 100.2
T1 = 50 N (the string at 30 degrees) and T2 = 86.6 N (the string at 60 degrees).1
Lami check: T1/sin(150) = T2/sin(120) = 100/sin(90) = 100 gives 50 N and 86.6 N.1
Total: 6 marks6

Answer: 50 N and 86.6 N

Fast method: Strings at 90 degrees: each tension equals W times the sine of that string's own angle with the horizontal: 100 sin(30) = 50 N and 100 sin(60) = 86.6 N.

Sanity check: Vertical components 50 x 0.5 + 86.6 x 0.866 = 25 + 75 = 100 N, equal to the weight. The steeper string carries the larger tension, as expected.

Typical trap: Assuming each string carries half the load, 50 N. That holds only for symmetric strings; here the steeper string carries more.

Formulas and units

Formula and unit box for Newton's laws and free-body diagrams
ResultFormulaValid whenUnits or noteWorked example
Second lawF_net = m a (per axis)inertial frame, constant mass; applied along each axis separatelyN (with m in kg and a in m/s²)Example 1
WeightW = m g, g = 10 m/s² in this coursenear the Earth's surface, g = 10 m/s² hereNExample 1
Lift, apparent weightN = m (g + a) with a upward positivelift or similar accelerating frame; a is lift acceleration, upward positiveNExample 1
Contact force, two blocks pushedN = F m_ahead/(m1 + m2)two blocks pushed on a smooth surface, F on the rear block, m_ahead is the front blockNnone
Lami theoremF1/sin(a1) = F2/sin(a2) = F3/sin(a3)three concurrent forces in equilibrium; each angle is opposite its forceNExample 7
Equilibrium of concurrent forcessum F_x = 0 and sum F_y = 0concurrent forces on a body in equilibriumNExample 5
Third lawF_AB = - F_BA (on different bodies)always, for the two bodies of an interactionNnone
First law (no net force)F_net = 0 means a = 0, velocity constantinertial frame; net force on the body is zerom/s²none

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Reading the lift's direction of velocity as if it decided the reading, instead of the direction of acceleration. Why it tempts: Everyday words "going up" and "going down" are about velocity, and the option with m(g + a) sits next to the correct one.
  • Calling the contact force between pushed blocks equal to the applied force. Why it tempts: The force seems to be "passed on" through the contact, and F itself is an obvious option; but part of F accelerates the first block.
  • Treating a pair of action and reaction forces as cancelling in the same free-body diagram. Why it tempts: They are equal and opposite, so it feels natural to cancel them, but they act on different bodies.
  • Using the wrong angle in Lami theorem: the angle between the force and a neighbour instead of the angle between the other two forces. Why it tempts: The sine ratio looks like it should use the angle next to the force, and the diagram shows that angle; the correct angle is the one opposite to the force.
  • Believing a body needs a net force to keep moving at constant velocity. Why it tempts: In everyday life things slow down, but that is because of friction or air resistance; with zero net force the velocity is constant, as the first law says.

Time per question and fast method

Target: about 90 seconds per question.

Draw one free-body diagram, name the axis of acceleration and write F_net = m a once. For connected bodies use the system trick for acceleration, then isolate the body nearest the unknown force. Lift readings: m(g + a) with a taken upward. For equilibrium of three concurrent forces use Lami theorem or resolve along two axes. For a conceptual first-law item ask whether the net force is zero.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. A man of mass 40 kg stands on a weighing machine in a lift that accelerates downward at 2 m/s². What does the machine show, in newtons? Take g = 10 m/s².
Show the answer

Answer: C: 320. N = m (g - a) = 40 x 8 = 320 N. The 480 N option is for an upward acceleration and 400 N is the weight at rest.

Question 2. Blocks of 3 kg and 2 kg lie in contact on a smooth table and a 25 N force pushes the 3 kg block towards the 2 kg block. What is the contact force between them, in newtons?
Show the answer

Answer: A: 10. a = 25/5 = 5 m/s² and the contact force on the 2 kg block is 2 x 5 = 10 N, smaller than the applied force.

Question 3. Why do the action and reaction forces of the third law not cancel each other?
Show the answer

Answer: B: They act on different bodies. The two forces are equal and opposite, but each acts on a different body. A cancellation needs both forces on the same body.

Question 4. A load of 100 N hangs in equilibrium from two strings that make an angle of 60 degrees with each other and equal angles with the vertical. The tension in each string in newtons is closest to
Show the answer

Answer: B: 57.7. Lami: T/sin(150) = 100/sin(60), so T = 100 x 0.5/0.866 = 57.7 N.

Question 5. Three forces 6 N, 8 N (at right angles to it) and F keep a body in equilibrium. The magnitude of F in newtons is
Show the answer

Answer: B: 10. F balances the resultant of two perpendicular forces: sqrt(36 + 64) = 10 N.

Question 6. A 5 kg block slides at a constant 3 m/s on a smooth horizontal surface with no horizontal force acting. The net horizontal force in newtons is
Show the answer

Answer: A: 0. By the first law, constant velocity means zero net force; no force is needed to keep it moving.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

The three laws, stated for problem solving

First law: a body keeps its state of rest or uniform motion in a straight line unless a net external force acts, which defines inertial frames. Second law: the net external force on a body of constant mass equals m a, and in vector form F_net = m a holds component by component. Third law: if body A exerts a force on body B, B exerts an equal and opposite force on A, and the two act on different bodies, so they never cancel inside one free-body diagram. Force has units of newton (kg m/s²) and dimensions M L T⁻2. Weight is the gravitational force m g and is a force; mass is a scalar measure of inertia. Examiners mostly test the second law, with the third law hidden in contact-force and tension questions. The correct habit is to choose one body, list only the forces acting ON it, choose axes, and write F = m a per axis before reading any numbers.

Drawing a free-body diagram that earns the marks

Isolate one body, replace everything around it by the forces it exerts on that body, and draw nothing else. Typical forces: weight m g downward, normal force perpendicular to the contact surface, tension along a string away from the body, spring force along the spring, friction along the surface, and an applied force. Do not draw the force the body exerts on others, and never draw a "force of motion" or a centripetal force as an extra arrow. Pick axes along the direction of known or likely acceleration, so one equation has zero acceleration. For several bodies draw one diagram each and connect them through the constraint (same acceleration for a taut string, equal and opposite contact forces). Check the result: the number of independent equations must equal the number of unknowns. Missing one real force, or adding an arrow for a force that nothing exerts (a "force of motion"), are the two commonest errors.

Contact forces and the system trick

When blocks touch on a smooth surface and a force F pushes them, the whole system accelerates at a = F/(total mass). The contact force on the front block is the force that gives it that acceleration, N = (mass ahead of the contact) x a. It is smaller than F because the first block uses part of F for its own acceleration. For a string joining blocks pulled by F, the tension is also (mass beyond the point) x a. Use the system trick only for external forces; internal contact and tension forces appear when you separate a body. Applying it to the blocks in turn is a direct application of the second law, not a separate result.

Lifts and apparent weight (application of the second law)

A weighing machine reads the normal force N on the person. For a lift with acceleration a taken upward positive, and the ground as an inertial frame, N - m g = m a, so N = m (g + a). Upward acceleration raises the reading; downward acceleration a lowers it to m (g - a); free fall (a = g downward) gives zero reading, called weightlessness. The reading depends on the acceleration, not on the velocity: a lift moving upward but slowing down has a downward acceleration, so the reading is below m g. This is an application of the second law written in the inertial frame; no extra force is needed. Each string in a hanging chain of blocks carries m (g + a) for everything hanging below it.

Equilibrium of concurrent forces and Lami theorem

Forces are concurrent when their lines of action meet at one point. A body is in translational equilibrium when the vector sum of the forces is zero, so the sum of the components along each of two perpendicular axes is zero. Three forces in equilibrium must be concurrent and coplanar, and they form a closed triangle. Lami theorem (a standard shortcut for three concurrent forces) gives F1/sin(A1) = F2/sin(A2) = F3/sin(A3), where A1 is the angle between the other two forces F2 and F3, and so on. Check the angles add to 360 degrees. With more than three forces resolve into components instead.

First law, inertia and what examiners test

The first law says no net force means no change of velocity: a body at rest stays at rest and a body moving at constant velocity keeps moving at that velocity. No force is needed to keep it moving. Inertia is this reluctance to change velocity and its measure is mass, the same mass in F = m a. Frequent question types: lift readings, contact force between blocks, tension in a string between accelerating blocks, equilibrium of a knot or lamp hung from strings (components or Lami theorem), and conceptual items on inertia and action-reaction. JEE Main integer-type items reward a clean free-body diagram and one substitution, so draw first, compute second.

Memory hook

Suppose you stand in a lift of your apartment building in Pune with a bag of vegetables hanging from your hand, and you press the button for the ground floor.

  1. The moment the lift starts moving down you feel lighter and the bag feels lighter too, because the floor and your hand need to push up by less than the weight.
  2. When the lift moves down at steady speed the feeling is the same as at rest, since only acceleration changes the push.
  3. When the lift slows to a stop at the ground floor you feel heavier for a moment, because the lift accelerates upward as it brakes while still moving down.

The push of the floor on you is m(g + a) with a measured upward, so feeling heavier or lighter follows the acceleration, never the speed.

The floor pushes by m(g + a): speed does not matter, acceleration does.

Revision card

Try to answer each without looking above.

  1. State Newton second law for a system and why internal forces do not appear.
  2. Give the reading of a weighing machine in a lift for upward and downward acceleration a.
  3. Why do action and reaction forces never cancel in a single free-body diagram?
  4. State Newton first law and say what inertia measures.
  5. Write the condition for equilibrium of concurrent forces and Lami theorem, saying which angle goes with which force.
  6. Two blocks of 4 kg and 6 kg are tied by a string on a smooth table and a 50 N force pulls the 6 kg block: find the acceleration and the string tension.

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (see content/reviews/scope-audit-2026-11-20.md)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 2; fixed: 2
  • Report: content/reviews/learn2-lom-2026-11-20.md

Textbook references

  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 4: Laws of Motion, 4.5 NEWTON'S SECOND LAW OF MOTION (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 4: Laws of Motion, Example 4.6 Example 4.6 (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 4: Laws of Motion, 4.6 NEWTON'S THIRD LAW OF MOTION (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 4: Laws of Motion, 4.4 NEWTON'S FIRST LAW OF MOTION (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 4: Laws of Motion, 4.8 EQUILIBRIUM OF A PARTICLE (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 4: Laws of Motion, 4.11 SOLVING PROBLEMS IN MECHANICS (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 3 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
  • NCERT Class 11 Physics, Laws of Motion (read as a reference for scope; content written fresh)

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.