EngineeringRise

Frames of Reference and Vectors: JEE Main Notes

Reviewed Last updated 2026-11-20. Syllabus topic: Frames of reference and vectors in motion.

In short. Motion is always described relative to a frame of reference. Position, velocity and acceleration are vectors: add and subtract them by components, resolve them along chosen axes, and remember that a velocity that changes direction has accelerated even if its speed is constant.

  • A frame is an origin with axes and a clock; the same motion looks different in different frames.
  • Resolve a vector of magnitude A at angle theta from the x-axis into A cos(theta) and A sin(theta).
  • Add or subtract vectors by components; the magnitude of A + B is sqrt(A² + B² + 2AB cos(theta)).
  • Velocity is the derivative of position and acceleration is the derivative of velocity, component by component.
  • Change in velocity is final minus initial as vectors, so a change of direction alone gives non-zero acceleration.

Syllabus line: Kinematics The frame of reference, motion in a straight line, speed and velocity, uniform and non-uniform motion, average speed and instantaneous velocity, uniformly accelerated motion, velocity-time, position-time graph, relations for uniformly accelerated motion, relative velocity. Motion in a plane, projectile motion, uniform circular motion. (NTA JEE (Main) 2026 syllabus, Physics, Unit 2 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

  • Basic trigonometry and coordinate geometry (lesson planned): Sine, cosine and tangent of standard angles. Read the straight-line motion page first if signs of one-dimensional motion are unclear.

Related topics

The concept step by step

  1. Step 1: A frame of reference

    To say where something is, you need an origin, axes and a clock. That is a frame of reference. A passenger in a train sees the fan in the ceiling at rest; a person on the platform sees it moving at the train speed. Neither is wrong. Every statement about velocity has an unstated "relative to which frame", and in JEE Main the default is the ground unless told otherwise.

  2. Step 2: Scalars and vectors

    A scalar has only a size: distance, speed, time. A vector has a size and a direction: displacement, velocity, acceleration. A man who walks 30 m east and then 40 m north has travelled a distance of 70 m, but his displacement is a single vector from start to end with size 50 m. Always ask which one the question wants.

  3. Step 3: Resolving a vector into components

    A velocity of 40 m/s at 30 degrees above the x-axis has x-component 40 cos(30 degrees) = 34.6 m/s and y-component 40 sin(30 degrees) = 20 m/s. To recover the vector, magnitude = sqrt(34.6² + 20²) = 40 m/s and direction = arctan(20/34.6) = 30 degrees. Resolving along any convenient pair of perpendicular axes is a free choice, and it is the main tool of mechanics.

  4. Step 4: Adding and subtracting vectors

    Add components: the sum of (A_x, A_y) and (B_x, B_y) is (A_x + B_x, A_y + B_y). For two vectors of sizes A and B with angle theta between their directions, the size of the sum is sqrt(A² + B² + 2AB cos(theta)). With 6 and 8 at 60 degrees this gives sqrt(36 + 64 + 48) = 12.2. The difference A - B is A + (-B), so use the same formula with cos(theta) replaced by minus cos(theta).

  5. Step 5: Position, velocity and acceleration as vectors

    Position r = (x, y). Velocity v = dr/dt = (dx/dt, dy/dt), and acceleration a = dv/dt. For r = (2t², 3t) metres, v = (4t, 3) m/s and a = (4, 0) m/s². At t = 2 s the velocity is (8, 3) m/s, with speed sqrt(64 + 9) = 8.54 m/s, and the acceleration is purely along x.

  6. Step 6: Change in velocity needs vector subtraction

    Delta v = v_final - v_initial, as vectors. A ball hits a wall at 10 m/s and bounces back at 10 m/s along the same line: the speed is unchanged but Delta v = 20 m/s, because the direction reversed. Speed is a scalar and can stay constant while the velocity vector changes; any change in direction means acceleration.

  7. Step 7: Moving frames

    If a frame moves at velocity V relative to the ground, velocities in that frame are v - V. A coin dropped in a train moving at 20 m/s falls straight down for a rider, but for a platform observer it also moves 20 m/s sideways. Work in components: subtract the frame velocity component by component, then rebuild the magnitude and the direction.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

A body moves with velocity 40 m/s at 30 degrees above the horizontal. Find its horizontal and vertical components.

Marks-style solution of example 1
StepMarks
Horizontal component = v cos(30 degrees).1
Vertical component = v sin(30 degrees) = 40 x 0.5 = 20 m/s.1
Horizontal = 40 x 0.866 = 34.6 m/s; vertical = 20 m/s.1
Total: 3 marks3

Answer: 34.6 m/s horizontal, 20 m/s vertical

Fast method: cos 30 = 0.866, sin 30 = 0.5: scale both by 40.

Sanity check: Check: sqrt(34.6² + 20²) = sqrt(1197 + 400) = 40 m/s. Matches.

Example 2 (easy)

A man walks 30 m east and then 40 m north. Find the magnitude of his displacement and the total distance he has walked.

Marks-style solution of example 2
StepMarks
Displacement is the vector sum, with perpendicular parts 30 m and 40 m.1
Magnitude = sqrt(30² + 40²) = sqrt(2500) = 50 m, at 53.1 degrees north of east.1
Distance = 30 + 40 = 70 m; displacement = 50 m.1
Total: 3 marks3

Answer: Displacement 50 m; distance 70 m

Fast method: 3-4-5 triple scaled by 10.

Sanity check: The displacement 50 m is less than the distance 70 m, as it must be; they would be equal only along a straight line.

Example 3 (medium)

Two velocities of sizes 6 m/s and 8 m/s act at an angle of 60 degrees to each other. Find the size of their resultant.

Marks-style solution of example 3
StepMarks
R = sqrt(A² + B² + 2AB cos(theta)).1
R² = 36 + 64 + 2 x 6 x 8 x 0.5 = 148.2
R = sqrt(148) = 12.17 m/s.1
Total: 4 marks4

Answer: 12.17 m/s

Fast method: Bounds: between 8 - 6 = 2 and 8 + 6 = 14 m/s; at 60 degrees the value is near the upper end, 12.2.

Sanity check: The answer 12.17 m/s lies between the limits 2 m/s (opposite) and 14 m/s (same direction), as it must.

Example 4 (medium)

A particle has position r = (2t²) i + (3t) j metres. Find its speed at t = 2 s and its acceleration.

Marks-style solution of example 4
StepMarks
v = dr/dt = (4t) i + 3 j m/s; a = dv/dt = 4 i m/s².2
At t = 2 s, v = (8, 3) m/s.1
Speed = sqrt(64 + 9) = 8.54 m/s; acceleration = 4 m/s² along x.1
Total: 4 marks4

Answer: Speed 8.54 m/s; acceleration 4 m/s² along +x

Fast method: Differentiate each component separately, then take the magnitude only at the end.

Sanity check: Units: m/s for v (m divided by s) and m/s² for a. Speed 8.54 m/s exceeds the x-component alone 8 m/s, as it must.

Example 5 (medium)

Find the magnitude and direction (angle with the x-axis) of the resultant of A = 3 i + 4 j and B = 5 i + 12 j.

Marks-style solution of example 5
StepMarks
Add component by component: R_x = 3 + 5 = 8 and R_y = 4 + 12 = 16.1
Magnitude |R| = sqrt(8² + 16²) = sqrt(320) = 17.89.1
tan(theta) = 16/8 = 2, so theta = 63.43 degrees above the x-axis. The resultant is 17.89 units at 63.43 degrees.1
Total: 3 marks3

Answer: 17.89 units at 63.43 degrees to the x-axis

Fast method: Both components of the sum are even, so R = 8 (i + 2 j) and the slope is 2 at once; the magnitude is 8 sqrt(5).

Sanity check: The sizes of A and B are 5 and 13, so the resultant must lie between 8 and 18; 17.89 is close to 18 because the vectors are nearly parallel.

Example 6 (hard, multi-step)

A ball hits a smooth vertical wall with a speed of 10 m/s, its velocity making 30 degrees with the normal to the wall, and rebounds with the same speed and the same angle to the normal. Find the magnitude of the change in its velocity.

Marks-style solution of example 6
StepMarks
Take the normal as x. Before: (10 cos 30, 10 sin 30) = (8.66, 5). After: (-8.66, 5) m/s.2
Delta v = after - before = (-17.32, 0) m/s.2
Magnitude of change in velocity = 17.32 m/s, along the normal away from the wall.1
Total: 5 marks5

Answer: 17.32 m/s

Fast method: Parallel component unchanged, normal component reversed: Delta v = 2 v cos(30 degrees).

Sanity check: The change 17.32 m/s is less than 2 x 10 = 20 m/s, the value for a head-on bounce, because only the normal part reverses.

Typical trap: The speed is the same before and after, so subtracting the magnitudes gives zero. Velocity is a vector; its change is not zero.

Example 7 (hard, multi-step)

A coin is dropped from rest, relative to a train, from a height of 5 m above the floor of a train moving at a constant 20 m/s. Take g = 10 m/s². Find its speed just before it lands, as measured by a person standing on the ground.

Marks-style solution of example 7
StepMarks
In the train frame the coin falls from rest: t = sqrt(2h/g) = sqrt(1) = 1 s.1
Vertical velocity at landing = g t = 10 m/s (the same in both frames).1
Ground frame: horizontal velocity = 20 m/s, since the coin keeps the train velocity.2
Speed = sqrt(20² + 10²) = sqrt(500) = 22.4 m/s; in the train frame it is 10 m/s.2
Total: 6 marks6

Answer: 22.4 m/s on the ground; 10 m/s in the train

Fast method: Frame velocity adds as a vector: vertical 10 and horizontal 20 give sqrt(500).

Sanity check: Ground speed 22.4 m/s exceeds both 20 m/s and 10 m/s, as a hypotenuse must. The two observers agree on the fall time, 1 s.

Formulas and units

Formula and unit box for Frames of reference and vectors in motion
ResultFormulaValid whenUnits or noteWorked example
ComponentsA_x = A cos(theta); A_y = A sin(theta)theta measured from the x-axissame unit as AExample 1
Magnitude and direction|A| = sqrt(A_x² + A_y²); tan(theta) = A_y/A_xcomponents along perpendicular axes; add 180 degrees when A_x < 0 (quadrant)same unit as A, dimensionlessExample 2
Resultant of two vectorsR = sqrt(A² + B² + 2AB cos(theta))theta is the angle between the two vectors placed tail to tailsame unit as AExample 3
Equal vectorsR = 2A cos(theta/2)two vectors of equal magnitude A, theta between themsame unit as Anone
Velocity and accelerationv = dr/dt; a = dv/dtany motion; r, v are vectorsm/s (m/s²)Example 4
Change in velocityDelta v = v_final - v_initial (vector)any motion; vector difference, not difference of speedsm/sExample 6
Moving framev in frame = v ground - V frameframe moving at constant velocity, speeds far below light speedm/sExample 7

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Adding magnitudes of vectors that are not parallel. Why it tempts: The numbers are right in front of you, and adding them is the habit from scalar arithmetic.
  • Using sin for the horizontal component and cos for the vertical one without checking which angle is given. Why it tempts: The angle may be measured from the vertical or the incline; the option with swapped functions is listed deliberately.
  • Saying the acceleration is zero because the speed is constant. Why it tempts: Speed and velocity are confused; a velocity that turns has Delta v not equal to zero.
  • Finding the angle of a vector from tan alone and ignoring the quadrant. Why it tempts: The calculator returns an angle between -90 and 90 degrees, so a vector in the second or third quadrant gets the wrong direction.
  • Taking the change in velocity as the difference of speeds. Why it tempts: The question says "change in velocity" and the stem gives speeds; subtracting them looks natural.

Time per question and fast method

Target: about 60 seconds per question.

Resolve into components first and work with numbers per axis. Use the 3-4-5 and 5-12-13 triples to avoid calculators. For resultants, check the limits (A + B and |A - B|) to reject impossible options. For a change in velocity, subtract component by component rather than reasoning with sizes.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. What is the horizontal component of a 50 m/s velocity at 37 degrees to the horizontal? Use cos 37 degrees = 0.8.
Show the answer

Answer: A: 40 m/s. 50 x 0.8 = 40 m/s; 30 m/s is the vertical component.

Question 2. What is the resultant of two perpendicular forces of 5 N and 12 N?
Show the answer

Answer: C: 13 N. sqrt(25 + 144) = 13 N.

Question 3. A particle moves along a circle at constant speed. Which statement is correct?
Show the answer

Answer: D: Its velocity changes even though speed is constant. The direction changes, so the velocity vector changes and the acceleration is not zero.

Question 4. The magnitude of the sum of two vectors of sizes 3 and 4 can be at most
Show the answer

Answer: B: 7. The largest resultant occurs when they are parallel: 3 + 4 = 7. The smallest is 1.

Question 5. A ball moving at 10 m/s east strikes a wall and returns at 10 m/s west. What is the magnitude of the change in velocity?
Show the answer

Answer: A: 20 m/s. Delta v = (-10) - (+10) = -20 m/s: magnitude 20 m/s.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Frames: inertial and non-inertial, and why the frame matters

An inertial frame is one in which a body with no net force moves with constant velocity. A frame moving at constant velocity relative to an inertial frame is also inertial; kinematic quantities differ between such frames by a constant velocity, and accelerations are equal. A frame that accelerates is non-inertial, and extra apparent effects arise. In this chapter the ground is taken as inertial. Positions and velocities are frame dependent; time intervals are the same in all frames in Newtonian physics, and so the accelerations measured in two frames moving at constant relative velocity are identical.

Resolution, unit vectors and notation

The unit vectors i and j point along the positive x and y axes, each with magnitude 1 and no units. A vector is written A = A_x i + A_y j. The magnitude is |A| = sqrt(A_x² + A_y²), and the angle with the x-axis satisfies tan(theta) = A_y/A_x, with the quadrant fixed by the signs of the components. Do not decide a quadrant from tan alone. In an inclined-plane problem, rotate the axes so x lies along the plane; components of gravity along and perpendicular to the plane are g sin(alpha) and g cos(alpha). A negative component only says the vector points opposite to the positive axis.

Vector addition, subtraction and magnitudes

The triangle and parallelogram laws agree with component addition. For two vectors of size A and B at angle theta between them, the resultant has size R = sqrt(A² + B² + 2AB cos(theta)); R is largest at theta = 0 (A + B) and smallest at 180 degrees (|A - B|). For equal vectors of size A at angle theta, R = 2A cos(theta/2). The size of the difference is sqrt(A² + B² - 2AB cos(theta)). The direction of the resultant makes an angle with A whose tangent is B sin(theta)/(A + B cos(theta)). Vectors of sizes 3, 4 and 5 can add to zero because they form a closed triangle.

Position, velocity and acceleration; average and instantaneous

Displacement over an interval is r_final - r_initial. Average velocity is displacement divided by time; instantaneous velocity is the derivative, always tangent to the path. Average acceleration is Delta v divided by time, with Delta v a vector difference. Speed is the magnitude of velocity, and the rate of change of speed, d|v|/dt, is not the same as the magnitude of acceleration |dv/dt|. For circular motion at constant speed, d|v|/dt = 0 but |dv/dt| is not zero. Components of acceleration along and perpendicular to the velocity give the rate of speeding up and the rate of turning respectively.

What examiners test and edge cases

Typical items: resultant of two vectors for given angle; the angle for which the resultant has a given size; components along tilted axes; direction of velocity from r(t); the change in velocity when a ball bounces or a particle turns; and the magnitude and direction of a resultant found from components. Edge cases: the resultant of three vectors of equal size at 120 degrees is zero; a vector cannot be added to a scalar; and magnitudes cannot be added to find the magnitude of a sum unless the vectors are parallel. Keep units on every component and carry two decimals until the last step.

Memory hook

Suppose you are in a train at a steady speed and you drop a coin from your hand, while a friend stands on the platform watching the same coin through the window as the train goes past.

  1. To you the coin falls straight down, just as it would at home.
  2. To your friend on the platform, the coin falls but also moves forward at the speed of the train, so the path looks like a curve.
  3. Both of you are right: the coin lands at your feet either way. The sideways speed is the train velocity added to the downward fall; vectors let us combine the two views.

Different frames give different velocities for the same motion, and vector addition connects them: ground velocity = velocity in the train + velocity of the train.

Same motion, different frame: add or subtract the frame velocity as a vector.

Revision card

Try to answer each without looking above.

  1. What is a frame of reference, and which frame is assumed unless stated?
  2. Resolve a vector of size A at angle theta into components.
  3. Write the magnitude of the sum of two vectors of sizes A and B at angle theta.
  4. How are velocity and acceleration found from the position vector?
  5. Why is the change in velocity non-zero when only the direction changes?
  6. How do you convert a velocity from the ground frame into a moving frame?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (see content/reviews/scope-audit-2026-11-20.md)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 0; fixed: 0
  • Report: content/reviews/learn2-kin-2026-11-20.md

Textbook references

  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 3: Motion in a Plane, 3.5 RESOLUTION OF VECTORS (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 3: Motion in a Plane, Summary SUMMARY (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 3: Motion in a Plane, 3.6 VECTOR ADDITION - ANALYTICAL METHOD (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 3: Motion in a Plane, 3.7 MOTION IN A PLANE (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 3: Motion in a Plane, 3.2 SCALARS AND VECTORS (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 2 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
  • NCERT Class 11 Physics, Motion in a Plane (read as a reference for scope, content written fresh)

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.