EngineeringRise

Pulleys and Constrained Motion: JEE Main Notes

Reviewed Last updated 2026-11-20. Syllabus topic: Pulleys and constrained motion.

In short. A string over a smooth light pulley carries one tension and links the accelerations of the bodies through its fixed length. Write F = m a for each body, add the constraint, and solve. Atwood machine: a = (m1 - m2) g/(m1 + m2), T = 2 m1 m2 g/(m1 + m2).

  • Light string and smooth light pulley: tension is the same throughout and only the direction of the force changes at the pulley.
  • Inextensible string: the accelerations of the connected bodies are related by a constraint, equal in magnitude over a fixed pulley.
  • Atwood machine: a = (m1 - m2) g/(m1 + m2); T = 2 m1 m2 g/(m1 + m2); the pulley axle carries 2T, not (m1 + m2) g.
  • Movable pulley: differentiate the fixed total string length to relate accelerations; a pulley with two string segments moves at half the speed of the free end.
  • Decide the direction of motion by comparing driving forces first, then write signs consistently; a taut string cannot push, so T must stay positive.

Syllabus line: Laws of Motion Force and inertia, Newton's first law of motion, momentum, Newton's second Law of motion, impulse, Newton's third Law of motion. Law of conservation of linear momentum and its applications, equilibrium of concurrent forces. Static and Kinetic friction, laws of friction, rolling friction. Dynamics of uniform circular motion, centripetal force and its applications: vehicle on a level circular road, vehicle on a banked road. (NTA JEE (Main) 2026 syllabus, Physics, Unit 3 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

  • Newton's laws and free-body diagrams: Every pulley problem is one free-body diagram per block. Read this first if F_net = m a along a chosen axis is not automatic.
  • Friction: Blocks on a rough table or incline need the friction rules. Read this first if you cannot decide between static and kinetic friction.
  • Motion in a straight line: Constraints are relations between displacements, velocities and accelerations. Read this first if differentiating a relation between positions feels unfamiliar.

Related topics

The concept step by step

  1. What the string and the pulley do

    Pulleys and strings are applications of Newton's second and third laws: the string pulls each body with a force called tension, and every body obeys F = m a. In JEE Main a string is light (no mass) and inextensible (does not stretch), and a pulley is light and smooth (no friction, no mass). Then the string pulls each end with the same force T, called the tension. The pulley only turns the direction of that pull. It does not change its size. If the string had mass or the pulley had friction, the tension would differ on the two sides, but those cases are not asked at this level.

  2. The string fixes how the blocks move together

    An inextensible string keeps its length. If one block moves down by 1 m over a fixed pulley, the other block must move up by 1 m, so the two blocks have the same speed and the same acceleration size at every instant. This is the constraint. Without it you have too many unknowns. With it you can write one equation per block and solve for the common acceleration a and the tension T.

  3. Atwood machine: two hanging blocks

    Hang m1 and m2 (m1 heavier) over a fixed pulley. The heavier block goes down with acceleration a and the lighter goes up with the same a. For m1: m1 g - T = m1 a. For m2: T - m2 g = m2 a. Add them: (m1 - m2) g = (m1 + m2) a, so a = (m1 - m2) g/(m1 + m2). Put it back to get T = 2 m1 m2 g/(m1 + m2). Example: 2 kg and 3 kg give a = 2 m/s² and T = 24 N, and 3 x 10 - 24 = 6 = 3 x 2 confirms it.

  4. Block on a table and a hanging block

    Let m1 lie on a smooth table, joined over the edge pulley to a hanging m2. The only horizontal force on m1 is T, so T = m1 a. For m2: m2 g - T = m2 a. Then a = m2 g/(m1 + m2) and T = m1 m2 g/(m1 + m2). With friction on the table (kinetic coefficient mu), subtract the friction mu m1 g from the pull: a = (m2 - mu m1) g/(m1 + m2). First check that m2 g exceeds the limiting static friction, otherwise nothing moves.

  5. Force on the pulley and on the support

    A smooth light pulley has a string passing over it, and each side pulls the pulley with force T. For two vertical sides the support must hold 2T. In the Atwood machine 2T = 4 m1 m2 g/(m1 + m2), which is less than (m1 + m2) g while the blocks accelerate. Only when the blocks are at rest or move at constant velocity does the support carry the full weight of both blocks. This is a favourite trap.

  6. Movable pulleys and the length constraint

    When a pulley itself moves, write the total string length as a sum of segment lengths and keep it constant. Differentiate twice to relate accelerations. If a string passes under a light movable pulley and its other end is fixed to the ceiling, two vertical segments get longer when the pulley goes down by y, so the free end moves by 2y. Then the free end has twice the acceleration of the pulley. A light movable pulley has no net force on it, so the 2T pulling it up equals the tension in the string that holds the hanging load; for a load of mass M accelerating downward at a_B that tension is M (g - a_B).

  7. Inclines, direction of motion and slack strings

    On a smooth incline of angle theta the pull of gravity along the plane is m1 g sin(theta). Compare it with m2 g first to decide which way the system moves, and take that as positive. Then a = (m1 sin(theta) - m2) g/(m1 + m2). Finally confirm that T is positive, because a taut string can pull but never push. If a pulley itself moves, write F = m a for each body with its true acceleration and add the constraint from the string length.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

Masses of 4 kg and 6 kg hang from the ends of a light inextensible string over a smooth light fixed pulley and are released from rest. Find the tension in the string. Take g = 10 m/s².

Marks-style solution of example 1
StepMarks
Free-body diagram for each block: weight down and tension T up. The 6 kg block goes down and the 4 kg block goes up, both with the same acceleration a.1
6 kg block: 60 - T = 6a. 4 kg block: T - 40 = 4a. Adding gives 20 = 10a, so a = 2 m/s².2
T = 40 + 4 x 2 = 48 N, and the check on the 6 kg block gives 60 - 12 = 48 N.1
Total: 4 marks4

Answer: 48 N (acceleration 2 m/s²)

Fast method: T = 2 m1 m2 g/(m1 + m2) = 2 x 4 x 6 x 10/10 = 48 N.

Sanity check: Units are newtons. The tension 48 N lies between the two weights 40 N and 60 N, as it must. If the masses were equal, a would be 0 and T would be m g.

Example 2 (easy)

A 5 kg block lies on a smooth horizontal table and is joined by a light string over a smooth pulley at the table edge to a 2 kg block hanging freely. Find the tension in the string while the blocks move. Take g = 10 m/s².

Marks-style solution of example 2
StepMarks
Table block: only the string pulls it horizontally, so T = 5a. Hanging block: 2 x 10 - T = 2a.1
Substitute: 20 - 5a = 2a, so a = 20/7 = 2.857 m/s².1
T = 5 x 20/7 = 14.29 N.1
Total: 3 marks3

Answer: about 14.3 N (a = 2.86 m/s²)

Fast method: T = m1 m2 g/(m1 + m2) = 5 x 2 x 10/7 = 14.3 N.

Sanity check: The tension 14.3 N is below the weight of the hanging block, 20 N, because the hanging block accelerates downward. The acceleration 2.86 m/s² is below g.

Example 3 (medium)

A 6 kg block lies on a horizontal table with coefficient of kinetic friction 0.2 and is joined over a table-edge pulley to a 4 kg block hanging freely. The blocks are moving. Find the acceleration. Take g = 10 m/s².

Marks-style solution of example 3
StepMarks
Driving force = weight of hanging block = 40 N. Kinetic friction on the table block = 0.2 x 6 x 10 = 12 N, opposing motion.1
System: (40 - 12) = (6 + 4) a.1
a = 28/10 = 2.8 m/s². (Tension: 4 x (10 - 2.8) = 28.8 N.)1
Total: 3 marks3

Answer: 2.8 m/s²

Fast method: a = (m2 - mu m1) g/(m1 + m2) = (4 - 1.2) x 10/10 = 2.8 m/s².

Sanity check: Without friction the acceleration would be 40/10 = 4 m/s², and friction reduces it to 2.8 m/s². Tension 28.8 N is below 40 N and above the friction 12 N, as it must be.

Example 4 (medium)

In the Atwood arrangement of 4 kg and 6 kg blocks, the light smooth pulley hangs from a ceiling hook by a light rod. Find the force the hook supports while the blocks move. Take g = 10 m/s².

Marks-style solution of example 4
StepMarks
Find the tension first: a = (6 - 4) x 10/10 = 2 m/s² and T = 4 x (10 + 2) = 48 N.1
The string pulls the pulley down with T on each side. The pulley is light, so the hook force equals 2T.2
Hook force = 2 x 48 = 96 N, less than the total weight 100 N.1
Total: 4 marks4

Answer: 96 N

Fast method: Hook force = 4 m1 m2 g/(m1 + m2) = 4 x 24 x 10/10 = 96 N.

Sanity check: Limiting case m1 = m2: the formula gives 2 m g, the full weight of both, which is right for a pulley with static blocks. With accelerating blocks the centre of mass accelerates downward, so the support force is below the weight, and 96 N is below 100 N.

Typical trap: The total weight 100 N is the load on the hook only when the blocks are not accelerating. Here the blocks accelerate, and the hook load is 2T.

Example 5 (medium)

A 5 kg block lies on a smooth incline of angle 30 degrees and is joined by a light string over a smooth pulley at the top to a 2 kg block hanging freely. Find the magnitude of the acceleration and the tension. Take g = 10 m/s².

Marks-style solution of example 5
StepMarks
Driving forces: incline block 5 x 10 x sin(30 degrees) = 25 N down the slope; hanging block 20 N down. The larger one wins, so the 5 kg block moves down the slope and the 2 kg block moves up.1
System: (25 - 20) = (5 + 2) a, so a = 5/7 = 0.714 m/s².2
Hanging block moving up: T - 20 = 2a, so T = 20 + 1.43 = 21.43 N.1
Total: 4 marks4

Answer: a = 0.714 m/s² (5 kg block down the slope), T = 21.4 N

Fast method: a = (m1 sin(theta) - m2) g/(m1 + m2) = (2.5 - 2) x 10/7 = 0.714 m/s², positive, so the incline block moves down.

Sanity check: The tension 21.4 N lies between 20 N and 25 N, the two driving forces. The acceleration is far below g because the two forces almost cancel. If theta were 0, the incline block would be on a flat table and the hanging block would pull it with a = 20/7.

Typical trap: Many students assume the 2 kg hanging block falls. Compare the driving forces first: the block on the incline pulls with 25 N, more than the 20 N of the hanging block, so the incline block slides down.

Example 6 (hard, multi-step)

Block A of mass 2 kg lies on a smooth table. A light string from A passes over a smooth fixed pulley at the table edge, goes down and under a light movable pulley that carries block B of mass 4 kg, and its other end is fixed to the ceiling. Both vertical string segments are vertical. Find the tension in the string. Take g = 10 m/s².

Marks-style solution of example 6
StepMarks
Constraint: when B goes down by y, each of the two vertical segments lengthens by y, so A moves 2y along the table. Hence a_A = 2 a_B.2
Block A: T = 2 a_A = 4 a_B. Block B with its light pulley: 4 x 10 - 2T = 4 a_B.2
Substitute T = 4 a_B: 40 - 8 a_B = 4 a_B, so a_B = 40/12 = 3.33 m/s² and a_A = 6.67 m/s².1
T = 2 x 6.67 = 13.3 N. Check on B: 40 - 26.7 = 13.3 = 4 x 3.33.1
Total: 6 marks6

Answer: T = 13.3 N (a_B = 3.33 m/s², a_A = 6.67 m/s²)

Fast method: Use the work-like shortcut: the driving force on B is 40 N and its effective mass is 4 + 2 x 2² = 12 kg (A counted with the square of the ratio), so a_B = 40/12 = 3.33 m/s².

Sanity check: If A moved at the same rate as B (ratio 1) the result would be M g/(M + m); the ratio 2 squares into the factor 4, giving M g/(M + 4m) = 40/12. T = 13.3 N is below the 20 N that would act if 2T held B at rest, as it must while B accelerates down.

Example 7 (hard, multi-step)

Blocks of 2 kg and 3 kg lie on a smooth table and are joined by a light string. The 3 kg block is joined by a second light string over a smooth pulley at the table edge to a 5 kg block hanging freely. The blocks are released from rest. Find the tension in the string to the hanging block. Take g = 10 m/s².

Marks-style solution of example 7
StepMarks
Take the three blocks as one system. The only external force along the line of motion is the weight of the hanging block, 5 x 10 = 50 N, acting on a total mass of 2 + 3 + 5 = 10 kg.2
a = 50/10 = 5 m/s², the same for all three blocks because both strings are inextensible.1
Hanging block: 50 - T2 = 5 x 5, so T2 = 25 N.2
Check with the table blocks: T2 - T1 = 3 x 5 gives T1 = 10 N, and T1 = 2 x 5 = 10 N agrees. Tension in the string to the hanging block = 25 N.1
Total: 6 marks6

Answer: 25 N (acceleration 5 m/s²; the string between the table blocks carries 10 N)

Fast method: a = (hanging weight)/(total mass) = 50/10 = 5 m/s², then T2 = 5 x (10 - 5) = 25 N.

Sanity check: Units are newtons. T2 = 25 N is below the hanging weight 50 N and above T1 = 10 N, as the string closer to the pull must carry more. The acceleration 5 m/s² is below g because ten kilograms are moved by a 50 N pull.

Example 8 (medium)

A 6 kg block rests on a horizontal table with coefficient of static friction 0.5. It is joined over a table-edge pulley to a 2 kg hanging block, which is held and then released from rest. Find the friction force on the table block. Take g = 10 m/s².

Marks-style solution of example 8
StepMarks
Limiting static friction on the table block = 0.5 x 6 x 10 = 30 N.1
The pull available from the hanging block is at most its weight, 2 x 10 = 20 N, which is less than 30 N, so the blocks stay at rest.1
Static friction balances the string pull: f = T = 20 N.1
Total: 3 marks3

Answer: 20 N (the blocks do not move)

Fast method: Compare m2 g with mu_s m1 g first. If m2 g is smaller, friction equals m2 g and the acceleration is zero.

Sanity check: Friction 20 N is below its limit 30 N, so the assumption of rest holds. The tension equals 20 N, the weight of the hanging block, because a = 0.

Typical trap: Using kinetic friction 0.5 x 60 = 30 N, or concluding that the 2 kg block falls because it has weight. The pull of 20 N is below the limiting static friction, so nothing moves and the friction is 20 N, equal to the pull.

Formulas and units

Formula and unit box for Pulleys and constrained motion
ResultFormulaValid whenUnits or noteWorked example
Atwood machine, accelerationa = (m1 - m2) g/(m1 + m2)light inextensible string, smooth light fixed pulley, m1 > m2m/s²Example 1
Atwood machine, tensionT = 2 m1 m2 g/(m1 + m2)light inextensible string, smooth light fixed pulleyNExample 1
Force on the pulley support (light pulley)F = 2T = 4 m1 m2 g/(m1 + m2)light smooth fixed pulley supported at its axle, string vertical on both sidesNExample 4
Table (smooth) and hanging blocka = m2 g/(m1 + m2); T = m1 m2 g/(m1 + m2)smooth table, light string and pulley; m1 on table, m2 hangingm/s² (N)Example 2
Table with kinetic friction mua = (m2 - mu m1) g/(m1 + m2)rough table, light string and pulley; m1 on table, m2 hanging, block movingm/s²Example 3
Block on smooth incline and hanging blocka = (m1 sin(theta) - m2) g/(m1 + m2)smooth incline, light string and pulley; m1 on incline, m2 hanging, m1 sliding downm/s²Example 5
Chain of blocks on a smooth table (pulled by a hanging load)a = (hanging weight)/(total mass); T of each string = (mass pulled by that string) x asmooth table, light inextensible strings and pulley, all blocks moving togetherm/s² (N)Example 7
String-length constraint (movable pulley, two segments)a_free end = 2 a_pulleylight string over a movable pulley with two vertical segmentsm/s²Example 6
Light movable pulleysum of string pulls = pull of the load: 2T = M (g - a_B)light movable pulley carrying a load M; strings verticalNExample 6

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Taking the tension on a moving block as equal to its weight, T = m g. Why it tempts: At rest it is true, and the option equal to m g is always listed; once the blocks accelerate, T differs from the weight by m a.
  • Writing the hook or support force as (m1 + m2) g for an accelerating Atwood machine. Why it tempts: Total weight seems the load on the support, but the support carries 2T, which is smaller while the heavier block accelerates down.
  • Giving two blocks over a movable pulley the same acceleration. Why it tempts: Equal accelerations hold for a fixed pulley, so students carry the rule over without writing the string-length constraint; the free end moves 2 y when the pulley moves y.
  • Assuming the hanging block always goes down on an incline set-up. Why it tempts: Hanging blocks usually fall in the first examples, but on an incline the component m1 g sin(theta) can be larger, and the direction decides the signs.
  • Applying friction to the hanging block, or using mu m g of the wrong block. Why it tempts: Both blocks are drawn in one picture, and friction is a familiar term to add; only the block touching the table has friction.
  • Letting T come out negative and carrying on with the solution. Why it tempts: The algebra still gives numbers, but a negative tension means the string is slack and the motion assumed is not possible.

Time per question and fast method

Target: about 100 seconds per question.

Decide the direction by comparing driving forces. Then a = (net driving force along the string)/(total mass) in one line, and T from the block that has the simplest force list. Atwood: T = 2 m1 m2 g/(m1 + m2). Hook load: 2T. For a movable pulley write the length constraint first and use effective mass M + 4m type sums. Check that T lies between the driving forces.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. Blocks of 2 kg and 3 kg hang over a smooth light fixed pulley. What is the acceleration in m/s²? Take g = 10 m/s².
Show the answer

Answer: A: 2. a = (m1 - m2) g/(m1 + m2) = (3 - 2) x 10/5 = 2 m/s².

Question 2. A 3 kg block on a smooth table is joined over the table-edge pulley to a 2 kg hanging block. What is the tension in newtons? Take g = 10 m/s².
Show the answer

Answer: D: 12. T = m1 m2 g/(m1 + m2) = 3 x 2 x 10/5 = 12 N, less than the hanging weight 20 N.

Question 3. Blocks of 1 kg and 3 kg hang over a light smooth pulley fixed to a ceiling hook. What force does the hook support while the blocks move, in newtons? Take g = 10 m/s².
Show the answer

Answer: C: 30. T = 2 x 1 x 3 x 10/4 = 15 N and the hook carries 2T = 30 N, not the total weight 40 N.

Question 4. A string passes under a light movable pulley and has its other end fixed to the ceiling. If the pulley moves down by 0.5 m, how far does the free end of the string move, in metres?
Show the answer

Answer: D: 1. Two string segments lengthen by 0.5 m each, so the free end must travel 2 x 0.5 = 1 m.

Question 5. Why is the tension the same on both sides of a light string passing over a smooth light pulley?
Show the answer

Answer: B: Because the net force on a massless string or pulley element must be zero. A massless element with a nonzero net force would have infinite acceleration, so the forces on it must balance; a smooth pulley adds no friction torque. Equal masses are not needed.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Ideal string, ideal pulley and what tension means

Application of Newton's second law with strings. A string is called light when its mass is negligible and inextensible when its length cannot change. Applying F = m a to a small piece of a light string shows that the net force on it must be zero, so the tension is the same at every point. A pulley that is smooth and light cannot change the tension, so the tension is the same on both sides of it. The string can only pull, so tension is never negative; if the equations give a negative T the string is slack and the assumed motion is not possible. Units: tension in newton. A massive or rough pulley needs torque and belongs to rotational motion, so JEE Main pulley questions here take the pulley as light unless told otherwise. Always draw each block alone with T drawn along the string away from the block, and write one force equation per block along its line of motion.

Atwood machine and the table and hanging pair

Atwood machine with masses m1 > m2: a = (m1 - m2) g/(m1 + m2), T = 2 m1 m2 g/(m1 + m2). The tension lies between the two weights: m2 g < T < m1 g. The acceleration is always less than g, tends to g when m2 is tiny, and is zero when the masses are equal. Centre of mass of the pair accelerates downward with a smaller value than g, which explains why the support carries 2T = 4 m1 m2 g/(m1 + m2), less than the total weight. Block m1 on a smooth table with hanging m2: a = m2 g/(m1 + m2), T = m1 m2 g/(m1 + m2). With kinetic friction mu on the table, a = (m2 - mu m1) g/(m1 + m2) and T = m1 (a + mu g), provided m2 g is greater than mu_s m1 g so that the motion starts. The hanging block feels no friction. For two blocks on opposite faces of a smooth double incline, use the components m g sin(theta) in place of weights.

String-length constraints and movable pulleys

The general method is to name the positions of the bodies measured from a fixed line, write the total length of the string as a sum of those positions with coefficients equal to the number of string segments they affect, and set the sum equal to a constant. Differentiate once for velocities and again for accelerations. Example: a string runs from block A over a fixed pulley, down and under a movable pulley carrying block B, and up to a fixed point. Length = x_A + 2 y_B + constant, so the magnitude of a_A is 2 a_B. Equations: T = m_A a_A for the block on a smooth table, and M g - 2T = M a_B for the load (light movable pulley). Solving gives a_B = M g/(M + 4 m_A). Always count the segments that actually pull the movable pulley; each contributes one T. For a light movable pulley the net force must be zero, so 2T must equal the downward pull of whatever hangs from it, and the tension in the string holding the pulley itself is twice that of the string passing around it.

Inclined planes, direction of motion and slackness

For a block m1 on a smooth incline joined over the top pulley to a hanging m2, the unbalanced force along the string is m1 g sin(theta) - m2 g, and a = (m1 sin(theta) - m2) g/(m1 + m2). If this is negative, the hanging block goes down and the sign flips. Decide the direction from the sign of the unbalanced force before writing the equations, or keep the sign in the algebra and read the direction from the answer. With friction, friction acts opposite to the relative motion, so the direction of motion must be known first. If both blocks are on rough inclines, check whether the system starts at all by comparing the unbalanced force with the largest static friction. Tension T = m2 (g + a) when the hanging block m2 goes up and T = m2 (g - a) when it goes down. Cross-check the sign of T with a sanity test: it must lie between the two driving forces and never be negative.

Chains of blocks, two strings and the system method

When blocks are joined in a chain by separate light strings, each string has its own tension. Treat the whole chain as one system to get the common acceleration, a = (net external force along the line of motion)/(total mass); the internal tensions cancel in this step. Then isolate one block at a time to find each tension. Example: 2 kg and 3 kg blocks on a smooth table are joined by a string, and the 3 kg block is joined by a second string over the edge pulley to a hanging 5 kg block. Then a = 50/10 = 5 m/s², the string between the table blocks carries 2 x 5 = 10 N, and the string to the hanging block carries 5 x (10 - 5) = 25 N. The string nearer the pulling load carries the larger tension because it must accelerate more mass. Check the sign of every tension: a negative value means the string is slack.

What examiners test, and edge cases

Frequent forms: Atwood tension or acceleration with given masses; table and hanging block, smooth and rough; the force on the pulley or hook; a three-block chain with two strings, where tensions differ in each string; a block on a double incline; movable pulley with a ratio of accelerations 2 : 1; a chain of blocks on a table. For several strings, number each tension separately: the same tension belongs only to one continuous light string over smooth pulleys. Edge cases: equal masses give a = 0 and T = m g; if one mass is much larger the system behaves like free fall for the larger mass; the clamp load is smaller than the total weight while accelerating. Use the system trick for acceleration, a = (net driving force along the string)/(total mass), then isolate one block for T. JEE Main integer questions often ask for T in newtons, so keep exact fractions until the last line.

Memory hook

Suppose you draw water from an open well with a bucket tied to a rope that passes over a wheel at the top, and your younger sister holds the other end of the rope with a lighter load tied to it.

  1. If both loads weigh the same, nothing moves and the rope pulls each load with exactly its weight.
  2. If the bucket is heavier, it goes down and your sister's end goes up, and both ends move together at the same speed because the rope does not stretch.
  3. The rope pulls each end with the same force, a value between the two weights, so the heavier load is held back a little and the lighter load is pulled up a little.
  4. The wheel at the top feels the pull from both sides of the rope, which together are less than the sum of the two weights while the loads accelerate.

One rope has one tension, the fixed length makes the two loads move together, and the heavier side wins only by the difference of weights shared over the total mass.

One rope, one tension, one common acceleration: (m1 - m2) g shared over (m1 + m2).

Revision card

Try to answer each without looking above.

  1. State the Atwood machine acceleration and tension and say between which two values the tension lies.
  2. Why does the pulley support carry 2T, and when does it equal the total weight?
  3. For a block on a table joined to a hanging block, write a with and without kinetic friction.
  4. How do you get the acceleration ratio for a movable pulley from the string length?
  5. How do you decide the direction of motion on an incline before writing equations?
  6. For a chain of blocks joined by two strings, how do you find the common acceleration and then each tension?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (see content/reviews/scope-audit-2026-11-20.md)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 0; fixed: 0
  • Report: content/reviews/learn2-lom-2026-11-20.md

Textbook references

  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 4: Laws of Motion, 4.9 COMMON FORCES IN MECHANICS (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 4: Laws of Motion, Example 4.9 Example 4.9 (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 3 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
  • NCERT Class 11 Physics, Laws of Motion (read as a reference for scope; content written fresh)

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.