EngineeringRise

Gauss Law and Its Applications: JEE Main Notes

Reviewed Last updated 2026-11-20. Syllabus topic: Gauss law and its applications.

In short. Electric flux is the field times the area it crosses. For a closed surface, flux = (charge inside)/epsilon₀, whatever the shape. Symmetry then gives the field of a long line charge, an infinite sheet and a thin spherical shell.

  • Flux through a small area is E A cos(theta); through a closed surface it equals q_enclosed/epsilon₀, and only enclosed charge counts.
  • Long uniformly charged wire: E = lambda/(2 pi epsilon₀ r) = 2 k lambda/r, directed radially, falling as 1/r.
  • Infinite uniformly charged sheet: E = sigma/(2 epsilon₀), independent of distance, pointing away from a positive sheet.
  • Thin spherical shell of charge Q and radius R: field is zero inside and k Q/r² outside; just outside the surface it is k Q/R² = sigma/epsilon₀.
  • Gauss law is always true, but it gives the field easily only when symmetry (spherical, cylindrical, planar) makes E constant on the chosen surface.

Syllabus line: Electrostatics Electric charges: conservation of charge, Coulomb's law forces between two point charges, forces between multiple charges, superposition principle and continuous charge distribution. Electric field: electric field due to a point charge, electric field lines, electric dipole, electric field due to a dipole, torque on a dipole in a uniform electric field. Electric flux, Gauss's law and its applications to find field due to infinitely long uniformly charged straight wire, uniformly charged infinite plane sheet and uniformly charged thin spherical shell. Electric potential and its calculation for a point charge, electric dipole and system of charges, potential difference, equipotential surfaces, electrical potential energy of a system of two point charges and of electric dipole in an electrostatic field. Conductors and insulators, dielectrics and electric polarization, capacitors and capacitance, the combination of capacitors in series and parallel and capacitance of a parallel plate capacitor with and without dielectric medium between the plates, energy stored in a capacitor. (NTA JEE (Main) 2026 syllabus, Physics, Unit 11 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

  • Coulomb law, electric field and the dipole: Gauss law is a restatement of the inverse-square field. Read this first if E = k q/r² and field lines are not secure.
  • Frames of reference and vectors in motion: Fields and forces add as vectors. Read this first if resolving into components is not automatic.
  • Units and dimensions (lesson planned): Every formula here has compound units (C, N/C, V/m, F). Read this first if unit conversion from uC, nF or cm slips.

Related topics

The concept step by step

  1. Electric flux: field through a surface

    Electric flux measures how much field passes through a surface. For a flat area A in a uniform field E, flux = E A cos(theta), where theta is the angle between E and the normal to the area; the unit is N m²/C. Flux is a scalar. For a closed surface the normal points outward, so flux leaving is positive and flux entering is negative. It is zero when the field lies in the plane of the surface (theta = 90 degrees).

  2. Gauss law

    The total flux through any closed surface equals the net charge enclosed divided by epsilon₀: flux = q_enclosed/epsilon₀, with epsilon₀ = 8.85 x 10⁻12 C²/(N m²). Charges outside contribute zero net flux, because every line that enters the surface also leaves it. Moving a charge inside the surface changes the field on it but not the total flux. The law holds for every closed surface and every charge arrangement, and it follows from the inverse-square form of Coulomb law.

  3. Choosing a Gaussian surface by symmetry

    Gauss law gives the field quickly only when symmetry makes the field constant in magnitude and perpendicular to the surface over most of it. Use a sphere for spherical symmetry, a coaxial cylinder for a long line, and a small cylinder (pillbox) through a plane sheet. The surface is imaginary and chosen by you. On the parts of the surface where E is parallel to the surface, the flux is zero, so only the curved or end faces matter.

  4. Field of a long straight line charge

    Take a coaxial cylinder of radius r and length L around a line of uniform linear density lambda. By symmetry E is radial and constant on the curved surface, and there is no flux through the ends. So E x 2 pi r L = lambda L/epsilon₀, giving E = lambda/(2 pi epsilon₀ r) = 2 k lambda/r. The field falls as 1/r, not 1/r², because the line is infinite. Use the result for wires long compared with r.

  5. Field of an infinite plane sheet

    For a thin sheet of uniform surface density sigma, take a pillbox with its two circular faces of area A parallel to the sheet, one on each side. The field is perpendicular to the sheet and the same on both faces, so 2 E A = sigma A/epsilon₀ and E = sigma/(2 epsilon₀). The field does not depend on the distance from the sheet. For two parallel sheets add the fields as vectors; for a charged conductor surface the field just outside is sigma/epsilon₀.

  6. Field of a thin spherical shell

    For a thin shell of radius R and total charge Q, a Gaussian sphere of radius r > R encloses Q, so E x 4 pi r² = Q/epsilon₀ and E = k Q/r², exactly as if all the charge were at the centre. A Gaussian sphere with r < R encloses no charge, so E = 0 inside. The field jumps from 0 to k Q/R² = sigma/epsilon₀ across the surface. For several concentric shells, use only the charge inside the Gaussian sphere.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

A closed surface encloses charges of +6.0 uC and -2.1 uC, and another charge of 5.0 uC lies outside. Find the net electric flux through the surface. Take epsilon₀ = 8.85 x 10⁻12 C²/(N m²).

Marks-style solution of example 1
StepMarks
Only enclosed charge counts: q = 6.0 - 2.1 = 3.9 uC.1
Flux = q/epsilon₀ = 3.9 x 10⁻6/8.85 x 10⁻12.1
Flux = 4.4 x 10⁵ N m²/C.1
Total: 3 marks3

Answer: 4.4 x 10⁵ N m²/C

Fast method: Net charge 3.9 uC divided by 8.85 x 10⁻12 gives 0.44 x 10⁶ N m²/C. The outside charge is ignored.

Sanity check: Units: C/(C²/(N m²)) = N m²/C. Order of 10⁵ to 10⁶ for microcoulomb charges is typical; flux would be the same if the outside charge were removed.

Example 2 (easy)

A uniform field of 200 N/C makes an angle of 60 degrees with the normal to a plane square of area 0.50 m². Find the flux through the square.

Marks-style solution of example 2
StepMarks
Flux = E A cos(theta) with theta the angle to the normal.1
Flux = 200 x 0.50 x cos 60 degrees = 100 x 0.5.1
Flux = 50 N m²/C.1
Total: 3 marks3

Answer: 50 N m²/C

Fast method: E A = 100; multiply by cos 60 degrees = 0.5 to get 50.

Sanity check: Units: N/C x m². Limiting checks: theta = 0 gives the maximum 100, theta = 90 degrees gives zero. 50 lies between, as it should.

Example 3 (medium)

A thin spherical shell of radius 0.20 m carries a charge of 10 nC uniformly. Find the electric field at 0.10 m, at 0.20 m (just outside) and at 0.40 m from the centre. Take k = 9.0 x 10⁹ N m²/C².

Marks-style solution of example 3
StepMarks
Inside (r = 0.10 m < R): enclosed charge is zero, so E = 0.1
Just outside the surface: E = k Q/R² = 9.0 x 10⁹ x 10⁻8/0.04 = 2250 N/C.1
At 0.40 m: E = k Q/r² = 90/0.16 = 562.5 N/C, one quarter of the surface value because r is doubled.2
Fields: 0, 2250 N/C and 562.5 N/C (radially outward).1
Total: 5 marks5

Answer: 0; 2250 N/C; 562.5 N/C

Fast method: k Q = 90 V m. Divide by 0.04 for the surface (2250) and by 0.16 at double the radius (562.5).

Sanity check: Units: V m/m² = V/m. Consistency: sigma = Q/(4 pi R²) = 1.99 x 10⁻8 C/m² and sigma/epsilon₀ = 2250 N/C, the same as k Q/R².

Example 4 (medium)

A large non-conducting sheet carries a uniform surface charge density of 2.0 nC/m². Find the field near it, away from the edges. Take epsilon₀ = 8.85 x 10⁻12 C²/(N m²).

Marks-style solution of example 4
StepMarks
For an infinite sheet a pillbox has two faces, each of area A, and flux 2 E A.1
Gauss law: 2 E A = sigma A/epsilon₀, so E = sigma/(2 epsilon₀).1
E = 2.0 x 10⁻9/(2 x 8.85 x 10⁻12) = 113 N/C on each side, directed away from the sheet.1
Total: 3 marks3

Answer: 113 N/C

Fast method: sigma/epsilon₀ = 226 N/C; half of it is 113 N/C. The value does not change with distance.

Sanity check: Units: (C/m²)/(C²/(N m²)) = N/C. The conductor-surface formula sigma/epsilon₀ would give 226 N/C, twice as much; a thin non-conducting sheet radiates to both sides, which is why the factor 2 appears.

Typical trap: Using E = sigma/epsilon₀ for a single sheet. That value is the field just outside a charged conductor surface, or between two oppositely charged sheets. A single sheet gives sigma/(2 epsilon₀).

Example 5 (hard, multi-step)

Two large parallel sheets carry uniform charge densities +5.0 nC/m² and -3.0 nC/m². Find the field between them and outside them, and the force on an electron placed between the sheets. Take epsilon₀ = 8.85 x 10⁻12 C²/(N m²) and e = 1.6 x 10⁻19 C.

Marks-style solution of example 5
StepMarks
Each sheet gives a field sigma/(2 epsilon₀) away from a positive sheet and towards a negative one. Between the sheets both fields point from the positive sheet to the negative sheet and add.2
E between = (5.0 + 3.0) x 10⁻9/(2 x 8.85 x 10⁻12) = 452 N/C.2
Outside the fields oppose: E = (5.0 - 3.0) x 10⁻9/(2 x 8.85 x 10⁻12) = 113 N/C, pointing away from the pair, on both sides.1
Force on the electron = e E = 1.6 x 10⁻19 x 452 = 7.2 x 10⁻17 N, towards the positive sheet.1
Total: 6 marks6

Answer: between 452 N/C; outside 113 N/C; force 7.2 x 10⁻17 N

Fast method: Between: (5 + 3)/(2 x 8.85 x 10⁻3) N/C with nC and pF units: 8/0.0177 = 452 N/C. Outside: 2/0.0177 = 113 N/C.

Sanity check: Units: N/C and N. Limiting case: if the densities were equal and opposite the outside field would vanish and the inside field would be sigma/epsilon₀, the standard capacitor result.

Example 6 (medium)

A point charge of 5.31 uC is at the centre of a cube of edge 0.50 m. Find the flux through the whole cube and through one face. Take epsilon₀ = 8.85 x 10⁻12 C²/(N m²).

Marks-style solution of example 6
StepMarks
Whole cube: flux = Q/epsilon₀ = 5.31 x 10⁻6/8.85 x 10⁻12 = 6.0 x 10⁵ N m²/C.1
The charge is at the centre, so the six faces are equivalent and share the flux equally.1
Flux through one face = 6.0 x 10⁵/6 = 1.0 x 10⁵ N m²/C.1
Total: 3 marks3

Answer: whole cube 6.0 x 10⁵; one face 1.0 x 10⁵ N m²/C

Fast method: Q/epsilon₀ = 6 x 10⁵ and one sixth is 10⁵. The edge length does not matter.

Sanity check: Units: N m²/C. Independent of the edge length: moving the walls outwards leaves the enclosed charge unchanged. If the charge were at a corner, a far face would get one twenty-fourth of 6 x 10⁵, 2.5 x 10⁴.

Example 7 (hard, multi-step)

A long straight wire carries 5.0 nC per metre. A Gaussian cylinder coaxial with the wire has radius 0.10 m and length 0.40 m. (i) Find the flux through the cylinder. (ii) Find the field on its curved surface and check it against the flux. Take epsilon₀ = 8.85 x 10⁻12 C²/(N m²).

Marks-style solution of example 7
StepMarks
Enclosed charge = lambda L = 5.0 x 10⁻9 x 0.40 = 2.0 x 10⁻9 C.1
Flux = 2.0 x 10⁻9/8.85 x 10⁻12 = 226 N m²/C, all through the curved surface, as there is no flux through the ends.2
Curved area = 2 pi r L = 2 pi x 0.10 x 0.40 = 0.2513 m².1
E = 226/0.2513 = 899 N/C, which equals 2 k lambda/r = 2 x 9.0 x 10⁹ x 5.0 x 10⁻9/0.10 = 900 N/C within rounding.2
Total: 6 marks6

Answer: flux 226 N m²/C; field 9.0 x 10² N/C

Fast method: E = 2 k lambda/r = 90/0.1 = 900 N/C. Flux = E x area = 900 x 0.2513 = 226 N m²/C.

Sanity check: Units: N/C x m² = N m²/C. The flux does not depend on the radius for a fixed length; doubling the radius halves the field but doubles the area.

Formulas and units

Formula and unit box for Gauss law and its applications
ResultFormulaValid whenUnits or noteWorked example
Flux through a planeflux = E A cos(theta)uniform field over a plane surface; theta is the angle between E and the normalN m²/CExample 2
Gauss lawflux through closed surface = q_enclosed/epsilon₀any closed surface, charges at rest or moving; only enclosed charge countsN m²/C (epsilon₀ = 8.85 x 10⁻12 C²/(N m²))Example 1
Long line chargeE = lambda/(2 pi epsilon₀ r) = 2 k lambda/rinfinitely long uniformly charged straight line; r is the perpendicular distanceN/CExample 7
Infinite sheetE = sigma/(2 epsilon₀), independent of distanceinfinite uniformly charged non-conducting sheet, away from its edgesN/CExample 4
Between opposite sheetsE = sigma/epsilon₀; outside zerotwo large parallel sheets of equal and opposite density, away from the edgesN/Cnone
Thin shell outsideE = k Q/r² for r > R (just outside the surface at r = R)uniformly charged thin spherical shell; r is measured from the centreN/CExample 3
Thin shell insideE = 0 for r < Runiformly charged thin spherical shell or conductor sphere, any point insideN/CExample 3
Conductor surfaceE = sigma/epsilon₀ just outsideconductor in electrostatic equilibrium, point just outside the surfaceN/Cnone
Cube flux sharescentre: Q/(6 epsilon₀) per face; corner: Q/(24 epsilon₀) per far face, 0 per near facepoint charge at the cube centre or corner of a cube; flux of faces by symmetryN m²/CExample 6

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Including charges outside the Gaussian surface in the flux. Why it tempts: They do produce a field at points on the surface, so it feels natural to count them; but their lines enter and leave, adding zero net flux.
  • Using sigma/epsilon₀ for a single thin sheet, or sigma/(2 epsilon₀) just outside a conductor. Why it tempts: Both formulas appear in the same chapter and differ by a factor of two; a non-conducting sheet has field on both sides and a conductor surface has only one.
  • Applying k Q/r² to a line charge. Why it tempts: The point-charge formula is the one in memory; a line charge gives a 1/r field with an extra factor 2.
  • Saying the field inside a charged shell is the same as outside, or that the potential inside is zero. Why it tempts: Field and potential are mixed up; the field inside is zero but the potential is the constant k Q/R.
  • For a charge at a cube corner, giving each of the six faces equal flux. Why it tempts: The cube-centre case is memorised; the corner case has three faces with zero flux and three equal faces.

Time per question and fast method

Target: about 90 seconds per question.

Name the symmetry first and write the field directly: 2 k lambda/r for a line, sigma/(2 epsilon₀) for a sheet, k Q/r² outside and 0 inside for a thin shell. For flux, count only enclosed charge and divide by epsilon₀; for a cube use 1/6 (centre), 1/8 (corner, cube) or 1/24 (far face of a corner charge). For several shells, pick the radius and add up the shells inside it.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. A closed surface encloses 8.85 uC. The net flux through it is, in N m²/C (epsilon₀ = 8.85 x 10⁻12)
Show the answer

Answer: A: 10⁶. Flux = Q/epsilon₀ = 8.85 x 10⁻6/8.85 x 10⁻12 = 10⁶ N m²/C.

Question 2. The field of an infinite sheet with sigma = 8.85 x 10⁻9 C/m² is, in N/C (epsilon₀ = 8.85 x 10⁻12)
Show the answer

Answer: B: 500 N/C. E = sigma/(2 epsilon₀) = 8.85 x 10⁻9/(1.77 x 10⁻11) = 500 N/C.

Question 3. A thin shell of charge Q has field E at distance 2R from its centre. At distance 4R the field is
Show the answer

Answer: B: E/4. Outside the shell E is proportional to 1/r², so doubling the distance from 2R to 4R gives E/4.

Question 4. The field of a long line charge at 0.20 m is 90 N/C. At 0.60 m it is
Show the answer

Answer: B: 30 N/C. Line field is proportional to 1/r, so tripling r divides it by 3: 30 N/C.

Question 5. The field inside a uniformly charged thin spherical shell is
Show the answer

Answer: B: zero everywhere inside. A Gaussian sphere inside the shell encloses no charge, so by symmetry E = 0.

Question 6. A charge is moved from the centre of a closed surface to another point inside it. The net flux through the surface
Show the answer

Answer: C: stays the same. Flux depends only on the enclosed charge, which is unchanged.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Flux: sign, units and what it depends on

Flux through an open surface depends on its orientation: tilting a plane through angle theta from the field direction changes flux by cos(theta). Total flux through a closed surface depends only on the enclosed charge; it does not change if the surface is stretched, if outside charges are moved, or if the enclosed charge is moved within. A point charge Q at the centre of a cube sends Q/(6 epsilon₀) through each face. A charge at a corner of a cube is shared among eight cubes, so one cube gets Q/(8 epsilon₀) and each far face Q/(24 epsilon₀), while the three near faces get zero. For epsilon₀ = 8.85 x 10⁻12, a charge of 8.85 uC gives 10⁶ N m²/C.

When Gauss law can and cannot give the field

The law is always valid, but the field comes from it only when the symmetry is exact: spherical, infinite cylindrical or infinite planar. For a ring, a finite rod or a dipole use Coulomb law and integration instead. The field in the formula is the total field from all charges, inside and outside, whereas the charge is only that inside the surface. Two different things are easy to confuse here: charges outside change E at points on the surface, but not the flux through it. Always state the symmetry, the surface, and what is zero on it before writing the equation.

Standard results and their limits

Line: E = lambda/(2 pi epsilon₀ r), valid when the distance is much smaller than the length. Sheet: E = sigma/(2 epsilon₀) on each side, uniform; two oppositely charged sheets of equal density give E = sigma/epsilon₀ between them and zero outside. Shell: inside zero; outside k Q/r²; just outside the surface the field is k Q/R² (it jumps from zero across the shell). The potential of a shell is not zero inside, it is constant, k Q/R (next topic). A solid conducting sphere behaves like a shell for the field outside and has zero field inside. Compare units: lambda in C/m, sigma in C/m², field in N/C.

Concentric shells, superposition and examiner traps

For concentric shells, at a radius r include the charge of every shell whose radius is less than r and ignore the rest. The field in the gap between shells depends only on the inner shell, even when the outer shell is also charged. Superposition of sheets: left of two sheets the fields add with signs; for sheet densities sigma1 and sigma2, the field between is (sigma1 - sigma2)/(2 epsilon₀) in magnitude and outside it is (sigma1 + sigma2)/(2 epsilon₀). Traps: using sigma/epsilon₀ for a non-conducting sheet, using k Q/r² for a line charge, counting outer-shell charge inside a smaller Gaussian sphere, and putting r instead of 2 pi r L in the cylinder area.

Memory hook

Suppose a dairy keeps a tap running into a very long channel along the wall of a shed, and you hold a hoop of net or mesh around the channel to see how much water passes.

  1. However you bend the hoop, the amount of water passing through it depends only on how much the tap supplies inside it.
  2. A tap outside the hoop pushes as much water in as out again, so it adds nothing to the net count.
  3. Because the channel is long and even, the same count passes every metre of hoop, so the spread-out flow thins in proportion to the hoop size.

Net flux counts only the charge inside the surface; for a long line the field spreads over a cylinder of area 2 pi r L, so E falls as 1/r.

Count what is inside the net; outside sources push in as much as they pull out.

Revision card

Try to answer each without looking above.

  1. State Gauss law and say which charges contribute to the flux.
  2. Derive the field of a long line charge using a coaxial cylinder.
  3. Why is the field of an infinite sheet independent of distance?
  4. Give the field inside, on and outside a thin spherical shell.
  5. How is flux shared when a charge is at the centre of a cube, and when it is at a corner?
  6. Why is the field just outside a conductor surface sigma/epsilon₀ but sigma/(2 epsilon₀) for a thin sheet?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 1; fixed: 1
  • Report: content/reviews/learn3-est-2026-11-20.md

Textbook references

  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 1: Electric Charges and Fields, 1.9 ELECTRIC FLUX (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 1: Electric Charges and Fields, 1.13 GAUSS'S LAW (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 1: Electric Charges and Fields, 1.14.1 Field due to an infinitely long straight uniformly charged wire (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 1: Electric Charges and Fields, 1.14.2 Field due to a uniformly charged infinite plane sheet (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 2: Electrostatic Potential and Capacitance, 2.12 THE PARALLEL PLATE CAPACITOR (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 1: Electric Charges and Fields, 1.14.3 Field due to a uniformly charged thin spherical shell (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 2: Electrostatic Potential and Capacitance, 2.9 ELECTROSTATICS OF CONDUCTORS (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 2: Electrostatic Potential and Capacitance, 2.5 POTENTIAL DUE TO A SYSTEM OF CHARGES (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 11 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
  • NTA JEE (Main) 2026 syllabus, Physics, Unit 11 (https://jeemain.nta.nic.in/document/syllabus-2026/), read for scope
  • Standard results of school-level electrostatics; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.