Coulomb Law, Electric Field and Dipole: JEE Main Notes
Reviewed Last updated 2026-11-20. Syllabus topic: Coulomb law, electric field and the dipole.
In short. Charge is conserved and quantised. Point charges obey the inverse-square Coulomb law, and forces and fields from many charges add as vectors. A dipole of moment p = q x (separation) feels torque p x E in a uniform field.
- Coulomb law F = k q1 q2/r² acts along the line joining the charges; like charges repel, unlike attract.
- Superposition: the force on one charge is the vector sum of the forces from every other charge, each computed as if the others were absent.
- Field of a point charge E = k q/r²; for a continuous distribution add (integrate) the vector contributions of small elements.
- Dipole moment p = q x 2a points from negative to positive; axial field 2 k p/r³ (along p), equatorial field k p/r³ (opposite to p).
- Torque on a dipole in a uniform field is p E sin(theta) and tends to align p with E; the net force is zero.
Syllabus line: Electrostatics Electric charges: conservation of charge, Coulomb's law forces between two point charges, forces between multiple charges, superposition principle and continuous charge distribution. Electric field: electric field due to a point charge, electric field lines, electric dipole, electric field due to a dipole, torque on a dipole in a uniform electric field. Electric flux, Gauss's law and its applications to find field due to infinitely long uniformly charged straight wire, uniformly charged infinite plane sheet and uniformly charged thin spherical shell. Electric potential and its calculation for a point charge, electric dipole and system of charges, potential difference, equipotential surfaces, electrical potential energy of a system of two point charges and of electric dipole in an electrostatic field. Conductors and insulators, dielectrics and electric polarization, capacitors and capacitance, the combination of capacitors in series and parallel and capacitance of a parallel plate capacitor with and without dielectric medium between the plates, energy stored in a capacitor. (NTA JEE (Main) 2026 syllabus, Physics, Unit 11 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Units and dimensions (lesson planned): Every formula here has compound units (C, N/C, V/m, F). Read this first if unit conversion from uC, nF or cm slips.
- Frames of reference and vectors in motion: Fields and forces add as vectors. Read this first if resolving into components is not automatic.
- Newton's laws and free-body diagrams: Equilibrium of charges is a force balance. Read this first if drawing forces on one body is not secure.
Related topics
- Electrostatics (lesson planned)
- Gauss law and its applications
- Electric potential and equipotentials
- Current Electricity (lesson planned)
The concept step by step
Charge: conservation and quantisation
Charge comes in integer multiples of the elementary charge e = 1.6 x 10⁻19 C, and the total charge of an isolated system never changes. When two identical conducting spheres touch, the total charge is shared equally between them, which is the standard way charge is split in exam questions. Charge is a scalar with a sign. SI unit is the coulomb; microcoulomb (10⁻6 C) and nanocoulomb (10⁻9 C) must be converted before any formula is used.
Coulomb law for two point charges
The force between two point charges at rest is F = k q1 q2/r² with k = 1/(4 pi epsilon₀) = 9 x 10⁹ N m²/C² in vacuum or air. The force acts along the line joining them and the two forces form an action-reaction pair of equal magnitude. In a medium of dielectric constant K the force is divided by K. Put magnitudes in the formula and decide the direction by the signs: like charges repel, unlike charges attract.
Superposition for many charges
The force on a charge from several others is the vector sum of the individual Coulomb forces; each pair acts as if the rest were absent. Draw the force from each source on a diagram, resolve into x and y components, add, and only then take the magnitude. On a line the vectors are signed numbers, so careful signs decide a problem. For symmetric arrangements such as a square or an equilateral triangle, components perpendicular to the axis of symmetry cancel.
Electric field of a point charge and field lines
The field at a point is the force per unit positive test charge: E = F/q, in N/C (the same as V/m). A point charge q gives E = k q/r², radially outward if q is positive. Field lines start on positive charge, end on negative charge, never cross, and are closer where the field is stronger. A charge q in a field E feels F = q E, in the direction of E for positive q and against it for negative q.
Continuous charge distributions
For a rod, ring or arc, split the body into small elements dq, write the field dE = k dq/r² of each as a vector, use symmetry to cancel components, and integrate what is left. For a ring of charge Q and radius R the axial field is E = k Q x/(R² + x²)^(3/2); it is zero at the centre and maximum at x = R/sqrt(2). For an arc of angle 2 theta0 the field at its centre points along the symmetry axis. Always state which components survive before integrating.
The electric dipole and its field
A dipole is a pair of equal and opposite charges +q and -q separated by distance 2a. Its dipole moment is the vector p = q x 2a, directed from -q to +q, in C m. For a short dipole the field at distance r on the axis is 2 k p/r³ along p and on the equatorial line is k p/r³ opposite to p. These fall as 1/r³, faster than a point charge, because the two fields nearly cancel.
Torque on a dipole in a uniform field
In a uniform field the forces on the two charges are equal and opposite, so the net force is zero but they form a couple: torque = p x E with magnitude p E sin(theta), where theta is the angle between p and E. The torque tries to rotate p into the direction of E. It is zero when p is parallel or antiparallel to E and maximum, p E, when p is perpendicular to E. In a non-uniform field there is also a net force.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
A small sphere carrying +6.0 uC touches an identical sphere carrying -2.0 uC, and they are then separated to 20 cm in air. Find the force between them. Take k = 9.0 x 10⁹ N m²/C².
| Step | Marks |
|---|---|
| Charge is conserved and shared equally by identical spheres: each now has (6.0 - 2.0)/2 = +2.0 uC. | 1 |
| F = k q²/r² = 9.0 x 10⁹ x (2.0 x 10⁻6)²/(0.20)². | 1 |
| F = 0.90 N, repulsive, because both spheres are positive. | 1 |
| Total: 3 marks | 3 |
Answer: 0.90 N, repulsive
Fast method: Each sphere ends with 2 uC; k q² = 9 x 10⁹ x 4 x 10⁻12 = 0.036 N m²; divide by 0.04 m² to get 0.90 N.
Sanity check: Units: N m²/C² x C²/m² = N. Magnitude of order a newton for micro coulomb charges at tens of centimetres is typical. Limiting case: with r doubled the force would fall to 0.225 N.
Example 2 (easy)
Find the electric field at 0.30 m from a point charge of 5.0 nC in air, and the force on a 2.0 uC test charge placed there.
| Step | Marks |
|---|---|
| E = k q/r² = 9.0 x 10⁹ x 5.0 x 10⁻9/(0.30)². | 1 |
| E = 45/0.09 = 500 N/C, directed away from the charge. | 1 |
| F = q0 E = 2.0 x 10⁻6 x 500 = 1.0 x 10⁻3 N. | 1 |
| Total: 3 marks | 3 |
Answer: E = 500 N/C; F = 1.0 x 10⁻3 N
Fast method: k q = 45 V m; divide by r² = 0.09 to get 500 N/C; multiply by 2 x 10⁻6 C.
Sanity check: Units: N/C x C = N. Doubling the distance would cut E to 125 N/C. Force of a milli newton on a microcoulomb charge is reasonable.
Example 3 (medium)
Charges +4.0 uC and -4.0 uC are fixed 40 cm apart in air. Find the electric field at the midpoint, in units of 10⁶ N/C.
| Step | Marks |
|---|---|
| The midpoint is 0.20 m from each charge. | 1 |
| Field of +4 uC points away from it, field of -4 uC points towards it: at the midpoint both point from the positive to the negative charge, so they add. | 2 |
| E = 2 x k q/r² = 2 x 9.0 x 10⁹ x 4.0 x 10⁻6/0.04 = 1.8 x 10⁶ N/C, so the answer is 1.8. | 1 |
| Total: 4 marks | 4 |
Answer: 1.8 (x 10⁶ N/C)
Fast method: One charge gives 9 x 10⁹ x 4 x 10⁻6/0.04 = 0.9 x 10⁶ N/C; the two add, giving 1.8 x 10⁶.
Sanity check: Units: V m x 1/m² = V/m = N/C. For two equal like charges the same midpoint would give zero; the opposite sign makes the fields add, which is the limiting check.
Example 4 (medium)
A short dipole has moment p = 2.0 x 10⁻9 C m. Find the field at 0.30 m from its centre (i) on its axis and (ii) on its equatorial line, and state the directions relative to p.
| Step | Marks |
|---|---|
| Axial: E = 2 k p/r³ = 2 x 9.0 x 10⁹ x 2.0 x 10⁻9/(0.30)³ = 36/0.027 = 1333 N/C, along p. | 2 |
| Equatorial: E = k p/r³ = 18/0.027 = 667 N/C, opposite to p. | 2 |
| Axial 1.33 x 10³ N/C and equatorial 6.67 x 10² N/C. | 1 |
| Total: 5 marks | 5 |
Answer: axial 1.33 x 10³ N/C along p; equatorial 6.67 x 10² N/C opposite to p
Fast method: k p/r³ = 18/0.027 = 667 N/C; the axial field is double this.
Sanity check: Units: V m x m/m³ gives V/m. The ratio axial : equatorial = 2 : 1 is a check. Using the point-charge form k p/r² would give 200 N/C, wrong by the factor of r.
Example 5 (hard, multi-step)
Charge +9q is placed at x = 0 and charge +q at x = d, both free to move, with q = 2.0 uC and d = 0.40 m. A third charge Q is to be placed so that all three are in equilibrium. (Q must lie between them: outside the segment, the two like charges push on it in the same direction and cannot balance.) Find the position and value of Q.
| Step | Marks |
|---|---|
| Put Q between the charges. For Q to be in equilibrium the fields of 9q and q must cancel at its position x: 9q/x² = q/(d - x)², so x/(d - x) = 3 and x = 0.75 d = 0.30 m. | 2 |
| For q at x = d to be in equilibrium, the repulsion from 9q must be balanced by attraction to Q: k q x 9q/d² = k q |Q|/(0.25 d)², so |Q| = 9q x (0.25)² = 0.5625 q. | 2 |
| Q must be negative (attractive to both), Q = -0.5625 x 2.0 uC = -1.125 uC; the 9q charge is then balanced too, since k 9q x 0.5625 q/(0.75 d)² = 9 k q²/d². | 2 |
| Q = -1.125 uC placed 0.30 m from the +9q charge. | 1 |
| Total: 7 marks | 7 |
Answer: Q = -1.125 uC at x = 0.30 m
Fast method: Null point at x : (d - x) = 3 : 1 from 9q; the magnitude follows from the small charge: |Q| = q x 9 x (1/4)² = 9q/16 = 1.125 uC.
Sanity check: Units: uC. Check on the 9q charge: the push from q is 9 k q²/d² towards negative x, and the pull from Q (0.5625 q at 0.75 d) is 9 k q x 0.5625 q/(0.75 d)² = 9 k q²/d² towards positive x, so the net force is zero. Q is much smaller than 9q, as expected since Q is close to q.
Example 6 (hard, multi-step)
A thin semicircular wire of radius 0.20 m carries a total charge of 2 x pi uC uniformly distributed. Find the electric field at its centre, in units of 10⁵ N/C. Take k = 9.0 x 10⁹ N m²/C².
| Step | Marks |
|---|---|
| Charge per unit length lambda = Q/(pi R). An element at angle phi from the symmetry axis has dq = lambda R dphi and field k dq/R² pointing away from it. | 1 |
| Components perpendicular to the symmetry axis cancel in pairs; the axial components add: E = integral of (k lambda/R) cos(phi) dphi from -pi/2 to +pi/2 = 2 k lambda/R. | 2 |
| E = 2 k Q/(pi R²) = 2 x 9.0 x 10⁹ x 2 pi x 10⁻6/(pi x 0.04) = 9.0 x 10⁵ N/C. | 2 |
| The answer is 9.0 x 10⁵ N/C, directed away from the wire, along the symmetry axis. | 1 |
| Total: 6 marks | 6 |
Answer: 9.0 (x 10⁵ N/C), along the axis of symmetry
Fast method: E = 2 k lambda/R with lambda = 2 pi x 10⁻6/(pi x 0.2) = 10⁻5 C/m: E = 2 x 9 x 10⁹ x 10⁻5/0.2 = 9 x 10⁵ N/C.
Sanity check: Units: N/C. Limiting check: the field at the centre of a full ring is zero, and a semicircle gives a finite value along the axis; the result 2 k lambda/R is the field of an infinite wire at distance R, a known comparison.
Example 7 (medium)
A dipole of two charges of 1.5 uC and -1.5 uC, 2.0 cm apart, is placed with its axis perpendicular to a uniform field of 4.0 x 10⁴ N/C. Find the torque on it, and the torque when it has turned through 60 degrees from this position.
| Step | Marks |
|---|---|
| p = q x 2a = 1.5 x 10⁻6 x 0.020 = 3.0 x 10⁻8 C m. | 1 |
| Perpendicular to the field, theta = 90 degrees: torque = p E = 3.0 x 10⁻8 x 4.0 x 10⁴ = 1.2 x 10⁻3 N m. | 1 |
| After turning 60 degrees towards the field, theta = 30 degrees: torque = p E sin 30 degrees = 0.6 x 10⁻3 N m. | 1 |
| Total: 3 marks | 3 |
Answer: 1.2 x 10⁻3 N m, then 6.0 x 10⁻4 N m
Fast method: p E = 1.2 mN m at 90 degrees; sine of 30 degrees is one half.
Sanity check: Units: C m x N/C = N m. The torque falls as the dipole aligns, and is zero at theta = 0, the limiting case.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Coulomb law | F = k q1 q2/r², k = 9 x 10⁹ N m²/C² = 1/(4 pi epsilon₀) | point charges at rest, in vacuum or air; r in metres, q in coulombs | N (q in C, r in m) | Example 1 |
| In a medium | F = k q1 q2/(K r²) | point charges in a uniform, infinite dielectric of constant K | N | none |
| Field of a point charge | E = k q/r²; F = q E | point source charge, or a spherically symmetric charge outside it; F = qE for any field | N/C = V/m | Example 2 |
| Axis of a ring | E = k Q x/(R² + x²)^(3/2); maximum at x = R/sqrt(2) | point on the axis of a uniformly charged ring, x measured from the centre | N/C | none |
| Centre of a semicircle | E = 2 k Q/(pi R²) | uniformly charged semicircular wire, field at its centre of curvature | N/C | Example 6 |
| Dipole moment | p = q x 2a, from -q to +q | p points from -q to +q; a is half the separation of the charges | C m | Example 7 |
| Short dipole field | axial 2 k p/r³; equatorial k p/r³ (opposite to p) | short dipole (r much larger than the dipole length), point far from the centre | N/C | Example 4 |
| Torque on a dipole | tau = p x E, magnitude p E sin(theta) | dipole in a uniform field, theta the angle between p and E | N m | Example 7 |
| Null point of like charges | distances in ratio sqrt(q1) : sqrt(q2) | two like point charges on a line, null point lies between them | m | Example 5 |
Common mistakes and speed
- Dividing by r instead of r squared, or using centimetres without conversion. Why it tempts: The Coulomb formula looks like a simple ratio and an unconverted cm value gives a number of familiar size; one option usually sits at that wrong value.
- Adding electric fields or forces as plain numbers instead of vectors. Why it tempts: Superposition is said in words and students add magnitudes; for two charges at right angles the resultant needs a square root, and for opposite signs on a line the field signs differ.
- Using the point-charge field k p/r² for a dipole, or confusing axial and equatorial fields. Why it tempts: The dipole is two point charges, so the familiar formula is tried first; the 2 : 1 ratio and the direction reversal are easy to swap.
- Taking the null point of two like charges at the midpoint, or using the charge ratio instead of its square root. Why it tempts: Equal distances feel natural; the correct distance ratio sqrt(q1/q2) needs the inverse-square step.
- Forgetting that the net force on a dipole in a uniform field is zero, only the torque is not. Why it tempts: There are two charges with nonzero forces, and the couple is what remains; people sometimes quote p E as a force.
Time per question and fast method
Target: about 90 seconds per question.
Write k q/r² with powers of ten separated: for micro and nano charges do the powers of ten first. For two or three charges draw the arrows and add components in your head using symmetry. For a null point use the square-root ratio of charges directly. For a dipole write p = q x separation first, then pick 2 k p/r³ (axis), k p/r³ (equator) or p E sin(theta).
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 6 correct. Pick an option for each question.
Practice
- Two point charges of 2.0 uC and 3.0 uC are placed 30 cm apart in air. Take 1/(4 pi epsilon₀) = 9.0 x 10⁹ N… Verified (T1)
- Point charges +4.0 uC and +9.0 uC are fixed 50 cm apart in air. On the line joining them, the net electric… Verified (T1)
- An electric dipole has charges +2.0 uC and -2.0 uC separated by 4.0 cm. It is placed in a uniform electric… Verified (T1)
- A thin ring of radius 10 cm carries a charge of 5.0 nC spread uniformly. Take 1/(4 pi epsilon₀) = 9.0 x 10⁹ N… Verified (T1)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Coulomb law: scope, medium and units
Coulomb law is exact for point charges at rest; for spheres with uniformly distributed charge it holds with r measured between the centres, for points outside. The constant is k = 9 x 10⁹ N m²/C² and epsilon₀ = 8.85 x 10⁻12 C²/(N m²). In a medium of dielectric constant K, F = k q1 q2/(K r²). The force is a central, conservative force. The ratio of electric to gravitational force between a proton pair is of order 10³6, which is why gravity is ignored. Checking units: k q²/r² has N when q is in C and r in m; the most common numerical slip is using uC or cm unconverted.
Superposition, equilibrium of charges and null points
Equilibrium problems have three standard forms. A null point of two like charges q1 and q2 a distance d apart lies between them at distances in the ratio sqrt(q1) : sqrt(q2) from the charges. For unlike charges the null point lies outside the segment, on the side of the smaller magnitude. For a charge to be in equilibrium between two fixed charges, the net force from them must vanish; to have all three free charges in equilibrium the middle one must be opposite in sign to the outer two and the outer charges have magnitudes in a fixed ratio set by the distances. Write forces on each charge separately and check the signs of the answers.
Field of continuous distributions: standard results
Results used without derivation after you have seen them: field on the axis of a ring E = k Q x/(R² + x²)^(3/2) with maximum k Q/R² x 0.385 at x = R/sqrt(2) and zero at the centre; field at the centre of a semicircular wire of charge Q and radius R is 2 k Q/(pi R²), directed along the axis of symmetry; field of a uniformly charged straight rod at a point on its perpendicular bisector uses the end angles. For a ring, the field a long way off tends to k Q/x², the point-charge result, which is the limiting-case check. Uniform linear charge density is lambda = Q/L, surface density sigma = Q/A.
Dipole: fields, torque and what examiners test
The axial and equatorial fields of a short dipole are in the ratio 2 : 1 at equal distances and point in opposite senses. At a general point at angle theta from p the field magnitude is (k p/r³) sqrt(1 + 3 cos² theta). Torque is tau = p E sin(theta); for small angles about the stable position the dipole executes simple harmonic motion with angular frequency sqrt(p E/I), I being the moment of inertia. Stable equilibrium is theta = 0, unstable is theta = 180 degrees. In a non-uniform field a net force acts; a dipole aligned with the field (theta = 0) moves towards the stronger field region, while one at theta = 180 degrees is pushed towards the weaker region. Frequent traps: using the point-charge formula for a dipole, mixing up axial and equatorial, using the separation as a instead of 2a, and forgetting that a dipole is neutral overall.
Field lines, conductors and vector bookkeeping
Field lines never intersect (a point has one field direction), are perpendicular to the surface of a conductor, and the number per unit area is proportional to the field strength. Lines of a single positive charge are radial outward. For two equal and opposite charges they leave the positive charge and end on the negative one. A neutral point is where the fields cancel; it need not lie on a line of force in a simple way, so use coordinates. In JEE items, give every force a coordinate sign, mark all four quadrants of a square arrangement, and sanity-check the direction of the resultant by symmetry before computing its size.
Memory hook
Suppose two children stand at opposite ends of a school corridor, each holding a strong fan that blows air out towards the other, and you stand in the corridor with a light paper strip.
- Close to one fan the strip is blown strongly away from it; at twice the distance the push is only a quarter as strong.
- With both fans blowing, the strip is pushed by two airflows at once, so you add the pushes, as arrows, to find the net push.
- There is one spot between the fans where the two pushes are equal and opposite, and it lies nearer the weaker fan.
Each charge sets up a field that falls as 1/r², the fields add as vectors, and the null point of two like charges lies nearer the smaller charge.
Fields add as arrows and fall off as one over distance squared; the quiet spot sits nearer the weaker source.
Revision card
Try to answer each without looking above.
- State Coulomb law with the value of k and the direction of the force for like and unlike charges.
- Why is the field of a dipole a 1/r³ field, and what is the ratio of axial to equatorial field?
- Where is the null point of two like charges q1 and q2 a distance d apart?
- Write the field on the axis of a ring and say where it is maximum.
- Write the torque on a dipole in a uniform field and state the stable and unstable orientations.
- Why is the net force on a dipole in a uniform field zero?
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 2; fixed: 2
- Report: content/reviews/learn3-est-2026-11-20.md
Textbook references
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 1: Electric Charges and Fields, Summary SUMMARY (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 1: Electric Charges and Fields, 1.10.1 The field of an electric dipole (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 1: Electric Charges and Fields, 1.11 DIPOLE IN A UNIFORM EXTERNAL FIELD (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 1: Electric Charges and Fields, 1.5 COULOMB'S LAW (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 1: Electric Charges and Fields, 1.10 ELECTRIC DIPOLE (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 11 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
- NTA JEE (Main) 2026 syllabus, Physics, Unit 11 (https://jeemain.nta.nic.in/document/syllabus-2026/), read for scope
- Standard results of school-level electrostatics; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.