Electric Potential and Equipotentials: JEE Main Notes
Reviewed Last updated 2026-11-20. Syllabus topic: Electric potential and equipotentials.
In short. Potential is a scalar: V = k q/r for a point charge, added algebraically for many charges. A charge q moved through a potential difference gains energy q V. Potential energy of a pair is k q1 q2/r; of a dipole it is -p E cos(theta).
- V = k q/r for a point charge (zero at infinity); for several charges add the signed values, with no direction involved.
- Work done by the field in moving q from A to B is q (V_A - V_B); an external agent moving it slowly does the opposite, q (V_B - V_A).
- Potential energy of a system is the sum over distinct pairs of k q_i q_j/r_ij; for two charges U = k q1 q2/r.
- Equipotential surfaces are perpendicular to field lines, the field points from high to low potential, and no work is done moving a charge along one.
- Dipole: V = k p cos(theta)/r² (zero on the equatorial line); potential energy U = -p E cos(theta) in a uniform field.
Syllabus line: Electrostatics Electric charges: conservation of charge, Coulomb's law forces between two point charges, forces between multiple charges, superposition principle and continuous charge distribution. Electric field: electric field due to a point charge, electric field lines, electric dipole, electric field due to a dipole, torque on a dipole in a uniform electric field. Electric flux, Gauss's law and its applications to find field due to infinitely long uniformly charged straight wire, uniformly charged infinite plane sheet and uniformly charged thin spherical shell. Electric potential and its calculation for a point charge, electric dipole and system of charges, potential difference, equipotential surfaces, electrical potential energy of a system of two point charges and of electric dipole in an electrostatic field. Conductors and insulators, dielectrics and electric polarization, capacitors and capacitance, the combination of capacitors in series and parallel and capacitance of a parallel plate capacitor with and without dielectric medium between the plates, energy stored in a capacitor. (NTA JEE (Main) 2026 syllabus, Physics, Unit 11 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Coulomb law, electric field and the dipole: Potential is built from the point-charge field. Read this first if E = k q/r² and the dipole moment are not secure.
- Work, kinetic energy and power: Potential difference is work per unit charge. Read this first if the work-energy theorem is unclear.
- Units and dimensions (lesson planned): Every formula here has compound units (C, N/C, V/m, F). Read this first if unit conversion from uC, nF or cm slips.
Related topics
- Electrostatics (lesson planned)
- Gauss law and its applications
- Capacitors and dielectrics
- Work, kinetic energy and power
The concept step by step
Potential energy and potential difference
The electrostatic force is conservative, so work done by it depends only on the end points. The potential difference V_B - V_A is the work done by an external agent, per unit positive charge, in moving a test charge slowly from A to B. The unit is the volt, 1 V = 1 J/C. The work done by the field itself between the same points is the negative of this. A charge q moved through potential difference V changes its potential energy by q V.
Potential of a point charge and of many charges
Taking the potential zero at infinity, a point charge q gives V = k q/r at distance r. It is positive for positive q and negative for negative q, and it falls as 1/r while the field falls as 1/r². For many charges the potential is the algebraic sum of the individual potentials, V = sum of k q_i/r_i. Because V is a scalar there are no components and no directions; only the signs of the charges matter.
Potential energy of a system of charges
The potential energy of a system is the work needed to assemble it from infinitely separated charges. For two charges it is U = k q1 q2/r, positive for like charges and negative for unlike. For three or more charges add the contribution of every distinct pair once: bringing in the second charge costs k q1 q2/r12 and the third costs k q3 (q1/r13 + q2/r23). A system of N charges has N(N - 1)/2 pairs.
Equipotential surfaces and the field
An equipotential surface is a surface on which the potential has the same value everywhere. No work is done in moving a charge along it, so the field has no component along the surface: the electric field is perpendicular to every equipotential surface and points in the direction of decreasing potential. For a point charge the surfaces are concentric spheres; in a uniform field they are parallel planes, and a potential drop V across a distance d gives E = V/d. Surfaces of a conductor in equilibrium are equipotentials.
Potential of a ring, a shell and a dipole
Every element of a ring is at the same distance from a point on its axis, so V = k Q/sqrt(R² + x²) with no direction factor. A thin shell of charge Q and radius R has V = k Q/r outside and the constant V = k Q/R at all points inside and on the shell. A short dipole has V = k p cos(theta)/r², where theta is measured from the direction of p; it is zero on the equatorial line, where theta = 90 degrees.
Energy of a dipole in a uniform field
A dipole at angle theta to a uniform field E has potential energy U = -p E cos(theta), taking zero at theta = 90 degrees. It is lowest, -p E, when aligned with the field (stable) and highest, +p E, when opposite. The work done by an external agent in turning it from theta1 to theta2 is p E (cos(theta1) - cos(theta2)). The torque is p E sin(theta) and tends to reduce theta.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
Find the electric potential at 0.60 m from a point charge of 4.0 nC in air. Take k = 9.0 x 10⁹ N m²/C².
| Step | Marks |
|---|---|
| V = k q/r with zero potential at infinity. | 1 |
| V = 9.0 x 10⁹ x 4.0 x 10⁻9/0.60. | 1 |
| V = 36/0.60 = 60 V. | 1 |
| Total: 3 marks | 3 |
Answer: 60 V
Fast method: k q = 36 V m; divide by 0.60 m to get 60 V.
Sanity check: Units: N m²/C² x C/m = N m/C = J/C = V. At double the distance the value would be 30 V. A positive charge gives a positive potential.
Example 2 (medium)
Charges +2.0 uC and -2.0 uC are fixed 20 cm apart. At the midpoint find the potential and the electric field. Take k = 9.0 x 10⁹ N m²/C².
| Step | Marks |
|---|---|
| Both charges are 0.10 m from the midpoint. V = k (2.0 x 10⁻6)/0.10 + k (-2.0 x 10⁻6)/0.10 = 0. | 2 |
| The fields of both charges point from the positive to the negative charge, so they add: E = 2 k q/r² = 2 x 9.0 x 10⁹ x 2.0 x 10⁻6/0.010. | 1 |
| E = 3.6 x 10⁶ N/C, although the potential is zero. | 1 |
| Total: 4 marks | 4 |
Answer: V = 0; E = 3.6 x 10⁶ N/C
Fast method: Potential: equal and opposite scalars cancel. Field: 2 x 1.8 x 10⁶ = 3.6 x 10⁶ N/C.
Sanity check: Units: V/m = N/C. A zero potential does not mean a zero field: the potential changes rapidly across the midpoint. Moving a charge from infinity to the midpoint needs no net work, but the force on it there is large.
Example 3 (medium)
An electron starts from rest and is accelerated through a potential difference of 91 V. Find its final speed. Take e = 1.6 x 10⁻19 C and electron mass 9.1 x 10⁻31 kg.
| Step | Marks |
|---|---|
| Gain in kinetic energy = e V = 1.6 x 10⁻19 x 91 = 1.456 x 10⁻17 J. | 1 |
| (1/2) m v² = e V, so v = sqrt(2 e V/m). | 1 |
| v = sqrt(2 x 1.456 x 10⁻17/9.1 x 10⁻31) = sqrt(3.2 x 10¹3) = 5.66 x 10⁶ m/s. | 2 |
| Total: 4 marks | 4 |
Answer: 5.66 x 10⁶ m/s
Fast method: v = sqrt(2 e V/m) = sqrt(3.2 x 10¹3) = 5.66 x 10⁶ m/s; 91 V is chosen so that 2 x 1.6 x 91/9.1 = 32.
Sanity check: Units: sqrt(C V/kg) = sqrt(J/kg) = m/s. About 2 percent of the speed of light, so ignoring relativity is acceptable. Doubling V raises v by sqrt(2) only.
Example 4 (medium)
A dipole of moment 2.0 x 10⁻8 C m lies along a uniform field of 3.0 x 10⁴ N/C. How much work must an external agent do to turn it through 60 degrees?
| Step | Marks |
|---|---|
| Initial angle 0, final angle 60 degrees. U = -p E cos(theta). | 1 |
| W = p E (cos 0 - cos 60 degrees) = p E (1 - 0.5) = 0.5 p E. | 1 |
| p E = 2.0 x 10⁻8 x 3.0 x 10⁴ = 6.0 x 10⁻4 J, so W = 3.0 x 10⁻4 J. | 1 |
| Total: 3 marks | 3 |
Answer: 3.0 x 10⁻4 J
Fast method: p E = 0.6 mJ; the work is half of it, 0.3 mJ, since 1 - cos 60 degrees = 0.5.
Sanity check: Units: C m x N/C = N m = J. Limiting cases: turning through 90 degrees needs p E and through 180 degrees needs 2 p E; 60 degrees must lie between 0 and p E, and it does.
Example 5 (easy)
In a uniform field of 200 V/m, equipotential surfaces are drawn at every 5.0 V. Find the distance between neighbouring surfaces, in cm.
| Step | Marks |
|---|---|
| In a uniform field the potential drops by E d over a perpendicular distance d. | 1 |
| d = V/E = 5.0/200. | 1 |
| d = 0.025 m = 2.5 cm. | 1 |
| Total: 3 marks | 3 |
Answer: 2.5 cm
Fast method: Divide the potential step by the field: 5/200 = 0.025 m.
Sanity check: Units: V/(V/m) = m. A stronger field would bring the surfaces closer; at 400 V/m the spacing would be 1.25 cm.
Example 6 (hard, multi-step)
Four charges of magnitude 1.0 uC are fixed at the corners of a square of side 10 cm, with signs +, -, +, - going round. Find the electrostatic potential energy of the system. Take k = 9.0 x 10⁹ N m²/C².
| Step | Marks |
|---|---|
| A square has 4 adjacent pairs (opposite signs) and 2 diagonal pairs (like signs). Diagonal length a sqrt(2). | 2 |
| Adjacent: 4 x (-k q²/a) = -4 x 0.090 = -0.360 J, since k q²/a = 9.0 x 10⁹ x 10⁻12/0.10 = 0.090 J. | 2 |
| Diagonal: 2 x (k q²/(a sqrt(2))) = 2 x 0.0636 = +0.127 J. | 1 |
| U = -0.360 + 0.127 = -0.233 J. | 1 |
| Total: 6 marks | 6 |
Answer: -0.233 J
Fast method: U = (k q²/a)(-4 + 2/sqrt(2)) = 0.090 x (-4 + 1.414) = -0.233 J.
Sanity check: Units: J. The negative sign means the charges were bound: work is released when the system is assembled. If all four were positive U would be 0.090 x (4 + 1.414) = +0.487 J.
Example 7 (hard, multi-step)
A particle of mass 2.0 g and charge +3.0 uC is projected from far away at 10 m/s directly towards a fixed point charge of +5.0 uC. Find the distance of closest approach. Take k = 9.0 x 10⁹ N m²/C².
| Step | Marks |
|---|---|
| At closest approach the particle is momentarily at rest. Energy is conserved, with potential energy zero at infinity. | 1 |
| Initial kinetic energy = (1/2)(2.0 x 10⁻3)(10)² = 0.10 J. | 1 |
| At closest approach: k Q q/r = 0.10 J, with k Q q = 9.0 x 10⁹ x 5.0 x 10⁻6 x 3.0 x 10⁻6 = 0.135 J m. | 2 |
| r = 0.135/0.10 = 1.35 m. | 1 |
| Total: 5 marks | 5 |
Answer: 1.35 m
Fast method: r = k Q q/(kinetic energy) = 0.135/0.10 = 1.35 m.
Sanity check: Units: J m/J = m. A faster particle would approach closer, as r is inversely proportional to the kinetic energy. For a head-on approach, the answer does not depend on the direction chosen as long as it is directly at the charge.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Potential of a point charge | V = k q/r (zero at infinity) | point charge, zero of potential taken at infinity | V = J/C | Example 1 |
| System of charges | V = sum of k q_i/r_i (scalar sum) | point charges, zero of potential at infinity; add signed values, no components | V | Example 2 |
| Work by the field | W = q (V_A - V_B) | any static field; V_A - V_B is the potential drop from A to B | J | none |
| Pair potential energy | U = k q1 q2/r | point charges with zero of energy at infinity | J | Example 6 |
| Speed after acceleration | v = sqrt(2 q V/m) | charge q from rest, speed small compared with light, no other forces | m/s | Example 3 |
| Ring on its axis | V = k Q/sqrt(R² + x²) | point on the axis of a uniformly charged ring, x from its centre | V | none |
| Thin shell | V = k Q/r outside; V = k Q/R inside and on it | uniformly charged thin conducting or non-conducting shell, zero of potential at infinity | V | none |
| Uniform field | E = V/d between equipotential planes | uniform field, d measured perpendicular to the equipotential planes | V/m | Example 5 |
| Dipole potential and energy | V = k p cos(theta)/r²; U = -p E cos(theta) | short dipole at distance r much larger than its length; uniform field for the energy, theta from p | V (J) | Example 4 |
Common mistakes and speed
- Adding potentials as vectors, or using components for V. Why it tempts: Fields are added with components in the same chapter, so the habit carries over; potential only needs signed numbers.
- Counting each pair of charges twice (or missing diagonal pairs) in the energy of a system. Why it tempts: The sum over i and j looks symmetric; a square has six pairs, not eight or four.
- Taking zero potential to mean zero field, or zero field to mean zero potential. Why it tempts: The field is the slope of the potential; at the midpoint of a +q and -q pair the potential is zero though the field is not, and inside a shell the field is zero though the potential is not.
- Getting the sign of work wrong: work done by the field versus work done by an external agent. Why it tempts: Both are written as q times a potential difference, differing only in the order; the word agent or field in the question decides the sign.
- Using the separation a instead of 2a in p, or forgetting cos(theta) in the dipole potential. Why it tempts: Axis and equator formulas are memorised without checking the angle at which the potential is zero.
Time per question and fast method
Target: about 90 seconds per question.
Write potentials as signed numbers and add them: no components. For a pair energy write k q1 q2/r, and for N charges count N(N - 1)/2 pairs. For energy gained by a charge use q times the potential drop. For equipotentials use E = V/d between planes. For a dipole use p E (cos(theta1) - cos(theta2)) for work and k p cos(theta)/r² for potential.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 6 correct. Pick an option for each question.
Practice
- Three point charges of 2.0 uC each are brought from far apart to the corners of an equilateral triangle of… Verified (T1)
- A short dipole of moment 4.0 x 10⁻9 C m is treated as a point dipole at the origin, with the positive charge… Verified (T1)
- A thin ring of radius 0.30 m carries a charge of 40 nC distributed uniformly. Take 1/(4 pi epsilon₀) = 9.0 x… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Sign conventions and the work-energy link
Work done by the field from A to B is W = q (V_A - V_B); a positive charge moves spontaneously from high to low potential, a negative charge from low to high. If the charge starts from rest and only the electric force acts, kinetic energy gained = q (V_A - V_B). The electron volt is the energy of a charge e through 1 V: 1 eV = 1.6 x 10⁻19 J. A particle of charge q and mass m accelerated through V from rest has speed v = sqrt(2 q V/m). Closest approach of two like charges is found by equating kinetic energy at infinity to k Q q/r. Always decide the sign of every term, and state whether the work asked for is by the field or by an external agent.
Potential of standard bodies: results and limits
Point charge: k q/r. Ring on its axis: k Q/sqrt(R² + x²); at the centre k Q/R; far away it tends to k Q/x. Thin shell: k Q/r outside, k Q/R inside and at the surface. Dipole: k p cos(theta)/r²; zero on the equator, k p/r² on the axis on the positive side and negative on the other side. Uniform field: V changes linearly, V = -E x. Potential at a point is not zero just because the field is zero there (inside a shell, V = k Q/R), and field is not zero just because V is zero (equatorial line of a dipole, midpoint between equal and opposite charges). This pair of statements is the most tested conceptual trap.
Equipotential surfaces: reading diagrams
On a diagram of equipotentials drawn at equal steps of potential, closer surfaces mean a stronger field, since the field is the potential drop per unit distance. The field direction is perpendicular to the surface and towards lower potential. Two equipotential surfaces never intersect, because a point has one potential. A conducting body at equilibrium has one potential throughout its volume and surface. For equally charged point charges the surfaces near each charge are nearly spheres, and the potential has a saddle point at the neutral point, so the equipotential through it crosses itself (a figure-eight type surface, a single surface meeting itself, not two surfaces intersecting). In a uniform field E, planes separated by d differ in potential by E d.
Systems of charges, dipole energy and what examiners test
Typical items: potential at the centre of a square or triangle with given charges (sum the scalars, remember signs); potential energy of three or four charges (count each pair once); work needed to bring a charge from infinity to a point or between two points; kinetic energy or speed after a potential difference; dipole work for a rotation, p E (cos(theta1) - cos(theta2)); and statements about equipotentials and the zero of potential on the perpendicular bisector of a dipole. Common slips: counting pairs twice, using vector addition for V, losing a sign for negative charges, using a, the half-separation, in place of 2a for p, and confusing work done by the field with work done by the agent.
Memory hook
Suppose you push a loaded handcart up a gentle slope near your home, and then along a level lane before turning back downhill.
- On the slope your push does work that depends only on the height gained, not on the zigzag path you took.
- Along the level lane at constant height no work is needed against the slope, however far you go.
- Rolling back down, the cart gains speed equal to the energy that was stored by the height.
Potential is the height of the electric landscape: work depends only on potential difference, an equipotential surface is a level lane, and the field points downhill, perpendicular to the level lines.
Potential is height: work depends on height gained, level lanes cost nothing, and the field points downhill.
Revision card
Try to answer each without looking above.
- Define electric potential and state the potential of a point charge and of a thin spherical shell inside and outside.
- Write the work done by the field in moving a charge from A to B in terms of potentials.
- Write the potential energy of a system of three charges and count the pairs.
- Why is an equipotential surface perpendicular to the field, and which way does the field point?
- Write the potential of a short dipole and its value on the equatorial line.
- Write the potential energy of a dipole in a uniform field and the work to rotate it from theta1 to theta2.
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 1; fixed: 1
- Report: content/reviews/learn3-est-2026-11-20.md
Textbook references
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 2: Electrostatic Potential and Capacitance, 2.3 POTENTIAL DUE TO A POINT CHARGE (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 2: Electrostatic Potential and Capacitance, 2.5 POTENTIAL DUE TO A SYSTEM OF CHARGES (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 2: Electrostatic Potential and Capacitance, 2.7 POTENTIAL ENERGY OF A SYSTEM OF CHARGES (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 2: Electrostatic Potential and Capacitance, Summary SUMMARY (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 2: Electrostatic Potential and Capacitance, 2.6 EQUIPOTENTIAL SURFACES (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 2: Electrostatic Potential and Capacitance, 2.8.3 Potential energy of a dipole in an external field (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 11 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
- NTA JEE (Main) 2026 syllabus, Physics, Unit 11 (https://jeemain.nta.nic.in/document/syllabus-2026/), read for scope
- Standard results of school-level electrostatics; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.