Faraday Law, Lenz Law and Inductance: JEE Main Notes
Reviewed Last updated 2026-11-20. Syllabus topic: Faraday law, Lenz law and inductance.
In short. A changing magnetic flux through a circuit induces an emf e = -N dPhi/dt, whose direction follows Lenz's law (it opposes the change). A moving conductor gives e = B l v, and a coil resists changes of current through self-inductance, e = -L dI/dt.
- Flux Phi = B A cos(theta) in weber; emf magnitude is N times the rate of change of flux, and the flux can change through B, A or the angle.
- Lenz's law is conservation of energy: the induced current produces a force or a flux that opposes the cause, so work must be done to drive the change.
- Motional emf of a rod is e = B l v, and a rod of length l rotating about one end at angular speed w has e = 1/2 B w l².
- Self-inductance L = Phi/I (henry) gives e = -L dI/dt and stored energy 1/2 L I²; mutual inductance M gives e2 = -M dI1/dt.
- In an LR circuit the current grows as I = (E/R)(1 - e^(-t/tau)) with tau = L/R, and the inductor never lets the current jump.
Syllabus line: Electromagnetic Induction and Alternating Currents Electromagnetic induction: Faraday's law, induced emf and current, Lenz's law, eddy currents, self and mutual inductance. Alternating currents, peak and RMS value of alternating current/voltage, reactance and impedance, LCR series circuit, resonance, power in AC circuits, wattless current, AC generator and transformer. (NTA JEE (Main) 2026 syllabus, Physics, Unit 14 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Force on charges and currents, galvanometer: Motional emf and the braking force on a rod use F = B I l. Read this first if the force on a current-carrying rod is not clear.
- Biot-Savart law and Ampere law: The field inside a solenoid, B = mu0 n I, is needed for the inductance of a solenoid.
- Current electricity: resistance and Kirchhoff laws (lesson planned): Induced current is found from emf divided by resistance, and the LR circuit uses the loop rule.
- Work, energy and power (lesson planned): Lenz law is an energy statement, and the stored energy of an inductor is compared with work done.
Related topics
- Force on charges and currents, galvanometer
- Electromagnetic Induction and Alternating Currents (lesson planned)
- Alternating current, LCR circuits and resonance
- AC power, generator and transformer
The concept step by step
Magnetic flux and what can change it
Magnetic flux through a flat loop of area A in a uniform field B is Phi = B A cos(theta), where theta is the angle between the field and the normal to the loop. Its unit is the weber, 1 Wb = 1 T m². For a coil of N turns the flux linkage is N Phi. Flux can change in three ways: the field strength changes, the area changes (a sliding rod, a stretching loop), or the angle changes (a rotating coil). Every induction problem starts by writing Phi and asking which of the three is varying.
Faraday's law
Whenever the flux linked with a circuit changes, an emf is induced in it, with magnitude e = N |dPhi/dt|. If the circuit is closed with resistance R, the induced current is I = e/R, and the charge that flows in a time interval is q = (change in N Phi)/R, independent of how fast the change happens. The emf is induced whether or not there is a conductor; the conductor only provides the path for the current. Use the average rate (change in flux divided by the time) when the flux changes uniformly.
Lenz's law and the sign
The negative sign in e = -N dPhi/dt is Lenz's law: the induced current has a direction such that its own magnetic effect opposes the change of flux that produced it. If the flux through a loop is increasing, the induced current sets up a field opposing the original one; if the flux is decreasing, it supports it. This is conservation of energy. If the induced effect helped the change, the change would grow without any work being done and energy would be created. A magnet pushed towards a loop is repelled, and pulled away it is attracted.
Motional emf and the rod on rails
A rod of length l moving with velocity v perpendicular to a uniform field B, with l perpendicular to both, develops e = B l v across its ends, because the magnetic force on the free electrons separates charge. On rails with total resistance R the current is I = B l v/R and the magnetic force on the rod is F = B I l = B² l² v/R, opposing motion. The mechanical power B² l² v²/R used to move the rod at constant speed equals the electrical power e²/R dissipated as heat. A rod falling or sliding under a steady force reaches a terminal speed when this force balances the applied force.
Eddy currents
A solid piece of metal in a changing flux has circulating induced currents called eddy currents, whose direction opposes the change by Lenz's law. They dissipate energy as heat and exert a braking force on a conductor moving in a field. They are used in electromagnetic braking and induction heating, and they are reduced in transformer and motor cores by building the core from thin insulated laminations, which cuts the area of each current loop and raises its resistance.
Self-inductance and the LR circuit
The flux linked with a coil due to its own current is proportional to the current, N Phi = L I, where L is the self-inductance in henry. A change of current induces e = -L dI/dt, which opposes the change, so an inductor resists sudden changes of current. The energy stored is U = 1/2 L I². When a battery of emf E is connected across an inductor L in series with a resistor R, the current grows as I = (E/R)(1 - e^(-t/tau)) with time constant tau = L/R; after one time constant it has reached 63 percent of its final value E/R. For a long solenoid L = mu0 N² A/l.
Mutual inductance
When the current in one coil changes, the flux through a neighbouring coil changes and an emf is induced in it: e2 = -M dI1/dt, where M is the mutual inductance in henry. M depends on the geometry, the number of turns and the medium, and M is the same whichever coil is taken as the primary. The coefficient of coupling k satisfies M = k sqrt(L1 L2), with k at most 1. Two coaxial solenoids, one inside the other, are the standard case and have a large M.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
A coil of 50 turns and area 0.020 m² is placed in a uniform magnetic field of 0.30 T whose direction makes an angle of 60 degrees with the normal to the coil. Find the flux linkage N Phi in Wb.
| Step | Marks |
|---|---|
| Flux through one turn Phi = B A cos(theta) = 0.30 x 0.020 x cos 60 degrees. | 2 |
| cos 60 degrees = 0.5, so Phi = 0.30 x 0.020 x 0.5 = 3.0 x 10⁻3 Wb. | 1 |
| N Phi = 50 x 3.0 x 10⁻3 = 0.15 Wb. | 1 |
| Total: 4 marks | 4 |
Answer: 0.15 Wb
Fast method: N B A cos(theta) = 50 x 0.3 x 0.02 x 0.5 = 0.15 Wb.
Sanity check: Units: T m² = Wb. If theta were 0 the flux linkage would be 0.30 Wb, and at 90 degrees zero; 60 degrees gives half of 0.30, which agrees.
Example 2 (easy)
A metal rod of length 0.20 m moves at 5.0 m/s at right angles to a uniform field of 0.40 T, the rod being perpendicular to its velocity. Find the emf across its ends in V.
| Step | Marks |
|---|---|
| Rod, velocity and field are mutually perpendicular, so e = B l v. | 1 |
| e = 0.40 x 0.20 x 5.0. | 1 |
| e = 0.40 V. | 1 |
| Total: 3 marks | 3 |
Answer: 0.40 V
Fast method: B l v = 0.4 x 0.2 x 5 = 0.4 V.
Sanity check: Units: T m (m/s) = (N/(A m)) m (m/s) = N m/(A s) = J/C = V. Doubling the speed doubles the emf, a linear dependence as e = B l v requires.
Example 3 (medium)
A long solenoid has 500 turns, length 0.25 m and cross-sectional area 4.0 x 10⁻4 m², with air inside. Take mu0 = 4 pi x 10⁻7 T m/A. Find its self-inductance in mH.
| Step | Marks |
|---|---|
| L = mu0 N² A / l for a long solenoid. | 1 |
| N² = 250000, so mu0 N² A / l = 4 pi x 10⁻7 x 250000 x 4.0 x 10⁻4 / 0.25. | 2 |
| L = 5.03 x 10⁻4 H = 0.503 mH. | 1 |
| Total: 4 marks | 4 |
Answer: about 0.50 mH
Fast method: mu0 N² A / l: 4 pi x 10⁻7 = 1.2566 x 10⁻6; times 250000 = 0.314; times 4 x 10⁻4 = 1.257 x 10⁻4; divide by 0.25 = 5.03 x 10⁻4 H.
Sanity check: Units: (T m/A)(m²)/m = T m²/A = Wb/A = H. A solenoid this small gives a fraction of a millihenry, a reasonable order; doubling the turns would quadruple L.
Example 4 (medium)
Two coils are placed close together. When the current in the first coil changes uniformly by 2.0 A in 0.050 s, the induced emf in the second coil is 10 V. Find the mutual inductance in H, and the emf induced in the first coil if the current in the second coil changes by 4.0 A in 0.020 s.
| Step | Marks |
|---|---|
| e2 = M dI1/dt gives M = e2/(dI1/dt) = 10/(2.0/0.050) = 10/40. | 2 |
| M = 0.25 H. | 1 |
| M is the same in both directions, so e1 = M dI2/dt = 0.25 x (4.0/0.020) = 0.25 x 200. | 2 |
| e1 = 50 V, and M = 0.25 H. | 1 |
| Total: 6 marks | 6 |
Answer: M = 0.25 H; emf in the first coil is 50 V
Fast method: M = 10/40 = 0.25 H; then 0.25 x 200 A/s = 50 V.
Sanity check: Units: V/(A/s) = V s/A = H. A rate of change five times larger (200 against 40 A/s) gives five times the emf, 50 V against 10 V, consistent.
Example 5 (medium)
A metal rod of length 0.50 m rotates in a plane perpendicular to a uniform field of 0.40 T, about one end, at 20 rad/s. Find the emf between its ends in V.
| Step | Marks |
|---|---|
| Speed varies linearly along the rod, from 0 at the pivot to w l at the tip, so use the average speed w l/2. | 1 |
| e = B l (w l/2) = 1/2 B w l² = 0.5 x 0.40 x 20 x 0.25. | 2 |
| e = 1.0 V. | 1 |
| Total: 4 marks | 4 |
Answer: 1.0 V
Fast method: e = 1/2 B w l² = 0.5 x 0.4 x 20 x 0.25 = 1.0 V.
Sanity check: Units: T (rad/s) m² = V. The wrong value B l v with the tip speed v = 10 m/s would be 2.0 V, exactly twice, so the factor one half is the check.
Example 6 (hard, multi-step)
A vertical conducting rod of mass 0.10 kg and length 0.50 m slides without friction down two long vertical rails joined at the bottom by a resistor, so that the total circuit resistance is 2.0 ohm. A uniform horizontal field of 0.80 T is perpendicular to the plane of the rails. Take g = 9.8 m/s². Find the terminal speed in m/s and the current at that speed in A.
| Step | Marks |
|---|---|
| At terminal speed the magnetic force balances the weight: B I l = m g. | 1 |
| I = m g/(B l) = 0.10 x 9.8/(0.80 x 0.50) = 0.98/0.40 = 2.45 A. | 2 |
| The emf is B l v = I R, so v = I R/(B l) = 2.45 x 2.0/0.40. | 2 |
| Terminal speed v = 12.25 m/s with a current of 2.45 A. | 1 |
| Total: 6 marks | 6 |
Answer: terminal speed 12.25 m/s, current 2.45 A
Fast method: v_t = m g R/(B² l²) = 0.98 x 2/(0.64 x 0.25) = 1.96/0.16 = 12.25 m/s; I = m g/(B l) = 2.45 A.
Sanity check: Check by energy: weight times speed is 0.98 x 12.25 = 12.0 W, and I² R = 6.0 x 2.0 = 12.0 W, so the whole power of gravity ends as heat. Units of m g R/(B² l²) are m/s.
Example 7 (hard, multi-step)
A coil of inductance 2.0 H and resistance 10 ohm is connected to an ideal 20 V battery at t = 0. Find the current at t = 0.20 s in A, and the rate of change of current at that instant in A/s.
| Step | Marks |
|---|---|
| Time constant tau = L/R = 2.0/10 = 0.20 s and final current I0 = E/R = 2.0 A. | 1 |
| At t = tau, I = I0 (1 - e^(-1)) = 2.0 x 0.632 = 1.264 A. | 2 |
| dI/dt = (E/L) e^(-t/tau) = 10 x e^(-1) = 3.68 A/s. | 2 |
| I = 1.26 A and dI/dt = 3.68 A/s. | 1 |
| Total: 6 marks | 6 |
Answer: I = 1.26 A, dI/dt = 3.68 A/s
Fast method: At one time constant the current is 63 percent of 2 A = 1.26 A, and the rate of rise has fallen to 1/e = 37 percent of its initial value E/L = 10 A/s, which is 3.68 A/s.
Sanity check: Check with the loop rule: E = I R + L dI/dt = 1.264 x 10 + 2 x 3.68 = 12.64 + 7.36 = 20.0 V. Limiting cases: at t = 0 the current is 0 and the rate is 10 A/s; at large t the current tends to 2.0 A.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Magnetic flux | Phi = B A cos(theta) | uniform B over a plane area; theta is the angle between B and the normal | Wb = T m² | Example 1 |
| Faraday's law | e = -N dPhi/dt | N identical turns, Phi the flux through one turn; minus sign is Lenz's law | V | none |
| Induced charge | q = N (change in Phi)/R | closed loop of constant resistance R; N times total flux change over time | C | none |
| Motional emf (straight rod) | e = B l v | straight rod with B, rod and velocity mutually perpendicular | V | Example 2 |
| Rotating rod or disc | e = 1/2 B w l² | rod of length l rotating about one end in a plane perpendicular to uniform B | V | Example 5 |
| Force on sliding rod | F = B² l² v/R | rod sliding on rails in uniform B perpendicular to the plane; circuit resistance R | N | none |
| Self-inductance | N Phi = L I; e = -L dI/dt | linear medium (no saturating iron core); L is constant | H (V) | none |
| Solenoid inductance | L = mu0 N² A/l | long air-core solenoid, end effects ignored | H | Example 3 |
| Stored magnetic energy | U = 1/2 L I² | inductor carrying current I | J | none |
| Mutual inductance | e2 = -M dI1/dt; M = k sqrt(L1 L2) | two coils with linear coupling; k is the coupling coefficient, at most 1 | H (V) | Example 4 |
| LR growth | I = (E/R)(1 - e^(-t/tau)), tau = L/R | L and R in series with a battery switched on at t = 0, zero initial current | A (s) | Example 7 |
Common mistakes and speed
- Leaving the area in cm², or forgetting the number of turns N. Why it tempts: The area is given in cm² and the arithmetic looks complete; one wrong option is usually out by a factor of 10⁴ or by N.
- Using B l v with the tip speed for a rod rotating about its end. Why it tempts: B l v is the first formula learnt for a moving rod; the factor one half from the varying speed is easily forgotten, and the doubled value sits in the options.
- Taking the induced emf as proportional to the flux (or to the final field) instead of its rate of change. Why it tempts: A large field or large flux feels like it should give a large emf, but a steady flux gives no emf at all, and a constant term in B drops out of dB/dt.
- Getting the direction of the induced current by making it help the change. Why it tempts: Intuition says the current should flow so as to follow the field, but Lenz's law says it opposes the change, so the reversed direction is a tempting option.
- Saying the current in an inductor can change instantly, or that the current is zero in steady state. Why it tempts: In a purely resistive circuit the current follows the switch at once; an inductor opposes the change, so the current is continuous, and in steady state it behaves like a plain wire.
- Confusing the condition on energy with the condition on current in an LR circuit (one quarter of the energy is not one quarter of the current). Why it tempts: Energy is proportional to I², so one quarter of the energy means half the current; students read it as the current fraction and get a wrong time constant multiple.
Time per question and fast method
Target: about 100 seconds per question.
Write e = N x (change of flux)/(time) with area in m² and decide whether B, A or the angle changes. For a sliding rod use F = B² l² v/R and equate to the driving force; for a rotating rod use 1/2 B w l². For LR circuits use tau = L/R and the fractions 63 percent and 37 percent for one time constant, rather than integrating.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 6 correct. Pick an option for each question.
Practice
- A coil of 200 turns and area 50 cm² has its plane perpendicular to a uniform magnetic field. The field falls… Verified (T1)
- A straight conducting rod of length 0.50 m slides at a constant speed of 4.0 m/s on two parallel horizontal… Verified (T1)
- The current in a coil of self-inductance 0.50 H falls uniformly from 6.0 A to zero in 0.030 s. The magnitude… Verified (T1)
- A coil of inductance 4.0 H and resistance 20 ohm is connected across an ideal 40 V battery at t = 0. The time… Verified (T1)
- A square loop of side 0.50 m and resistance 0.25 ohm lies with its plane perpendicular to a magnetic field… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Flux, emf and charge
Phi = B A cos(theta) for a uniform field; in general Phi is the surface integral of B dot dA. For N turns, e = -N dPhi/dt. The induced charge through a circuit of resistance R is q = integral of (e/R) dt = N (Phi_initial - Phi_final)/R, so it depends only on the total change of flux and on R, not on the time taken. A graph of flux against time gives emf as minus its slope; a graph of emf against time gives the change of flux as minus the area under it. If B changes at a constant rate dB/dt through a fixed loop of area A, the emf is constant at A dB/dt and so is the current. Units: V = Wb/s = T m²/s.
Lenz's law: how to get the direction
Method: (1) say whether the flux through the loop is increasing or decreasing, and in which direction it points; (2) the induced current produces a field opposing the change, so for increasing flux it produces a field in the opposite direction and for decreasing flux in the same direction; (3) use the right-hand rule to turn this field into a current direction. For a rod, a quicker check is that the magnetic force on the induced current opposes the motion. For a magnet approaching a ring the near face acquires the same pole as the approaching pole. Energy view: the induced current heats the circuit, and the energy comes from the agent that makes the change, which must do work against the opposing force.
Motional emf in the cases examiners use
Straight rod, speed v, perpendicular to B: e = B l v, with the end at the higher potential found from the force on positive charge, v cross B. If the rod is not perpendicular, use the component of l perpendicular to v and B. Rod rotating about one end in a plane perpendicular to B: the speed varies from 0 to w l along the rod, so e = integral of B w r dr = 1/2 B w l²; the potential difference is between the centre and the rim. A rod rotating about its midpoint has zero emf between the two ends, since the two halves give equal emfs of the same sense about the pivot. A circular disc rotating about its axis behaves like many radial rods in parallel and has e = 1/2 B w R² between the centre and the rim. A loop pulled out of a field sees emf only while the flux changes; a loop moving entirely in a uniform field has no emf.
Self and mutual inductance, energy, and the LR circuit
L = N Phi/I. For a long solenoid with n turns per metre, L = mu0 n² A l = mu0 N² A/l, and the stored energy density is B²/(2 mu0). Inserting an iron core multiplies L by the relative permeability. Inductors in series (no coupling) add; in parallel the reciprocals add. In the LR circuit growth: I = I0 (1 - e^(-t/tau)), the initial rate of rise is E/L, and the potential across the inductor is E e^(-t/tau). In decay (battery removed, the loop closed through R): I = I0 e^(-t/tau). At t = 0 an inductor behaves like an open circuit, and in steady state like a plain wire. Energy delivered by the battery in growth is shared between heat in R and magnetic energy in L. Mutual inductance obeys e2 = -M dI1/dt and M = N2 Phi2/I1.
What examiners test and the usual traps
Typical items: emf from a given B-t or flux-t relation (the constant term in B does not matter), force on a sliding rod and the terminal speed of a falling rod, rotating rod emf with the factor one half, direction of current or poles by Lenz's law, charge through a coil from the change of flux, LR circuit time constant and the energy or current at a given instant, inductances in a circuit with a switch (current just after closing or opening), and statements about eddy currents and laminated cores. Traps: forgetting N, leaving area in cm², using the final field instead of the change of field, using B l v for a rotating rod with the tip speed (this doubles the answer), and confusing the current with the energy when a time such as 'quarter of the final energy' is asked.
Memory hook
Suppose a cycle dynamo is fitted to the front wheel of a cycle on a dark village road. When the rider pedals harder the lamp glows brighter, and when she stops the lamp goes out at once.
- A magnet inside the dynamo spins near a coil, so the flux through the coil keeps changing, and the faster the wheel turns the larger the rate of change and the brighter the lamp.
- The pedals feel heavier once the lamp is on. That extra effort is the opposing force of Lenz's law: the induced current resists the spinning magnet.
- If the lamp is disconnected the pedals feel light again, because with no current there is no opposing force and no energy to supply.
The induced emf grows with the rate of change of flux, and the energy comes from the person who makes the flux change, as the heavier pedals show.
No change of flux, no emf; and the effort you feel is Lenz's law collecting its payment.
Revision card
Try to answer each without looking above.
- State Faraday's law with the sign, and say which three quantities can change the flux.
- State Lenz's law and explain why it is conservation of energy.
- Write the emf of a straight rod and of a rod rotating about one end, with the reason for the factor one half.
- Define self-inductance, give its unit, and write the energy stored in an inductor.
- Write the current in an LR circuit as a function of time and the meaning of the time constant.
- Explain eddy currents, one use and one remedy.
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 2; fixed: 2
- Report: content/reviews/learn5-emi-2026-11-20.md
Textbook references
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 6: Electromagnetic Induction, 6.3 MAGNETIC FLUX (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 6: Electromagnetic Induction, 6.4 FARADAY'S LAW OF INDUCTION (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 6: Electromagnetic Induction, 6.6 MOTIONAL ELECTROMOTIVE FORCE (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 6: Electromagnetic Induction, Example 6.6 MOTIONAL ELECTROMOTIVE FORCE (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 6: Electromagnetic Induction, 6.7.2 Self-inductance (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 6: Electromagnetic Induction, 6.5 LENZ'S LAW AND CONSERVATION OF ENERGY (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 6: Electromagnetic Induction, Example 6.7 MOTIONAL ELECTROMOTIVE FORCE (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 14 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
- Standard school-level electromagnetic induction results; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.