Force on Charges and Currents, Galvanometer: JEE Main
Reviewed Last updated 2026-11-20. Syllabus topic: Force on charges and currents, galvanometer.
In short. A charge q moving with velocity v in fields E and B feels F = q (E + v x B); the magnetic part does no work and gives circular motion of radius r = m v/(q B). A wire feels F = I L x B, parallel currents attract with 2 x 10⁻7 I1 I2/d newton per metre, and a loop feels torque N I A B sin(theta). A galvanometer becomes an ammeter with a shunt and a voltmeter with a series resistance.
- Lorentz force F = q (E + v x B); the magnetic force is perpendicular to v, does no work and changes direction, not speed.
- Perpendicular entry: r = m v/(q B) = p/(q B), period T = 2 pi m/(q B), independent of speed. Oblique entry gives a helix with pitch 2 pi m v cos(theta)/(q B).
- Wire in a field: F = I L x B, and for any shape F = I (end-to-end displacement) x B; parallel currents attract with F/L = mu0 I1 I2/(2 pi d), which defines the ampere.
- Loop torque: tau = M x B with magnitude N I A B sin(theta), theta between the normal and B.
- Galvanometer: N B A I = k theta; shunt S = Ig G/(I - Ig) for an ammeter; series R = V/Ig - G for a voltmeter.
Syllabus line: Magnetic Effects of Current and Magnetism Biot - Savart law and its application to the current carrying circular loop, Ampere's law and its applications to infinitely long current carrying straight wire and solenoid. Force on a moving charge in uniform magnetic and electric fields, force on a current-carrying conductor in a uniform magnetic field, the force between two parallel currents carrying conductors-definition of ampere, torque experienced by a current loop in a uniform magnetic field: Moving coil galvanometer, its sensitivity and conversion to ammeter and voltmeter. Current loop as a magnetic dipole and its magnetic dipole moment, bar magnet as an equivalent solenoid, magnetic field lines, magnetic field due to a magnetic dipole (bar magnet) along its axis and perpendicular to its axis, torque on a magnetic dipole in a uniform magnetic field, para-, dia- and ferromagnetic substances with examples, the effect of temperature on magnetic properties. (NTA JEE (Main) 2026 syllabus, Physics, Unit 13 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Electrostatics: electric field and force on a charge (lesson planned): Forces on charges and the idea of a field are used again. Read this first if field and force on a charge are unclear.
- Biot-Savart law and Ampere law: Force between currents and the galvanometer field use the field formulas of that topic. Read it first if B = mu0 I/(2 pi r) is not automatic.
Related topics
- Biot-Savart law and Ampere law
- Magnetic dipole, bar magnet and magnetic materials
- Magnetic Effects of Current and Magnetism (lesson planned)
- Current Electricity (lesson planned)
The concept step by step
Force on a moving charge
A charge q moving with velocity v in a magnetic field B feels F = q v x B. Its size is q v B sin(theta), and its direction is perpendicular to both v and B, found by the right-hand rule for a positive charge and reversed for a negative charge. If an electric field is also present, add q E. Because the magnetic force is always perpendicular to v, it does no work, so the speed and kinetic energy of the charge do not change in a magnetic field alone.
Circular and helical motion
For a velocity perpendicular to B, the magnetic force is a centripetal force: q v B = m v²/r, so r = m v/(q B). The period is T = 2 pi m/(q B), independent of the speed, so a faster particle moves on a bigger circle in the same time. If v makes an angle theta with B, the component v sin(theta) gives the circle and v cos(theta) is unchanged along B; the path is a helix of radius m v sin(theta)/(q B) and pitch 2 pi m v cos(theta)/(q B).
Force on a current-carrying wire and between parallel wires
A wire of length L carrying I in a uniform field feels F = I L x B, of size I L B sin(theta). For a curved wire the net force depends only on the vector from the start to the end. Two long parallel wires with currents I1 and I2 at a distance d exert on each other a force per unit length mu0 I1 I2/(2 pi d): attractive for currents in the same direction and repulsive for opposite. This is the classical (pre-2019) definition of the ampere, still the basis of the 2 x 10⁻7 N/m value: 1 A in each of two long parallel wires 1 m apart gives 2 x 10⁻7 newton per metre.
Torque on a current loop
A rectangular loop of N turns and area A carrying I in a uniform field has no net force but has a torque tau = N I A B sin(theta), where theta is the angle between the normal to the loop (given by the right-hand rule on the current) and B. In vector form tau = M x B with M = N I A. The torque is maximum when the plane of the loop is parallel to B (theta = 90 degrees) and zero when the plane is perpendicular to B. The loop tends to turn until its normal lines up with B.
Moving coil galvanometer, ammeter and voltmeter
In a moving coil galvanometer the coil sits in a radial magnetic field, so the torque N I A B is the same at every deflection. A spring with torsion constant k gives a restoring torque k theta, so theta = N B A I/k: the deflection is proportional to the current. Current sensitivity is theta/I = N B A/k; voltage sensitivity is theta/V = N B A/(k G). To read larger currents, connect a small shunt S in parallel: S = Ig G/(I - Ig). To read voltage V, connect a large resistance R = V/Ig - G in series.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
A straight wire 0.50 m long carries 6.0 A in a uniform field of 0.20 T, making 30 degrees with the wire. Find the force on it, in newton.
| Step | Marks |
|---|---|
| F = I L B sin(theta). | 1 |
| F = 6.0 x 0.50 x 0.20 x sin 30 degrees = 0.60 x 0.50. | 1 |
| F = 0.30 N. | 1 |
| Total: 3 marks | 3 |
Answer: 0.30 N
Fast method: I L B = 0.6 N and sin 30 degrees = 0.5, so F = 0.30 N.
Sanity check: Units: A x m x T = N. The force cannot exceed I L B = 0.60 N, the value for a wire perpendicular to the field, and 0.30 N is half of it.
Example 2 (easy)
A proton is accelerated from rest through 500 V and enters a uniform field of 0.20 T perpendicular to its velocity. Find the radius of its path, in cm. Take mp = 1.67 x 10⁻27 kg and e = 1.6 x 10⁻19 C.
| Step | Marks |
|---|---|
| Kinetic energy K = q V, so v = sqrt(2 q V/m). | 1 |
| r = m v/(q B) = sqrt(2 m V/q)/B. | 1 |
| sqrt(2 x 1.67 x 10⁻27 x 500/1.6 x 10⁻19) = 3.23 x 10⁻3, so r = 3.23 x 10⁻3/0.20. | 1 |
| r = 1.62 x 10⁻2 m = 1.62 cm. | 1 |
| Total: 4 marks | 4 |
Answer: about 1.62 cm
Fast method: r = sqrt(2 m V/q)/B = 3.23 x 10⁻3/0.20 = 0.0162 m.
Sanity check: Units: sqrt(kg V/C) = sqrt(kg x J/C²) gives kg m/(C s), then divide by T to get m. A proton speed here is about 3 x 10⁵ m/s, far below the speed of light, so the classical formula is fine.
Example 3 (medium)
Two long parallel wires 4.0 cm apart carry 5.0 A and 8.0 A in the same direction. Find the force per metre length between them, in micronewton per metre, and say whether it is attractive. Take mu0 = 4 pi x 10⁻7 T m/A.
| Step | Marks |
|---|---|
| F/L = mu0 I1 I2/(2 pi d) = 2 x 10⁻7 I1 I2/d. | 1 |
| F/L = 2 x 10⁻7 x 5.0 x 8.0/0.040. | 1 |
| Currents in the same direction attract. | 1 |
| F/L = 2.0 x 10⁻4 N/m = 200 micronewton per metre. | 1 |
| Total: 4 marks | 4 |
Answer: 200 micronewton per metre, attractive
Fast method: F/L = 2 x 10⁻7 x 40/0.04 = 2 x 10⁻4 N/m.
Sanity check: Units: T m/A x A x A/m = N/m. For 1 A each and 1 m apart the same formula gives 2 x 10⁻7 N/m, the definition of the ampere; here I1 I2/d = 1000 A²/m against 1 A²/m there, so the force per metre is 1000 times larger, 2 x 10⁻4 N/m.
Example 4 (medium)
A rectangular coil of 20 turns, 10 cm by 5.0 cm, carries 2.0 A in a uniform field of 0.50 T. The plane of the coil makes 30 degrees with the field. Find the torque, in N m.
| Step | Marks |
|---|---|
| Area A = 0.10 x 0.050 = 5.0 x 10⁻3 m² and M = N I A = 20 x 2.0 x 5.0 x 10⁻3 = 0.20 A m². | 1 |
| The torque uses the angle between the normal and B: if the plane makes 30 degrees with B, the normal makes 60 degrees. | 1 |
| tau = M B sin 60 degrees = 0.20 x 0.50 x 0.866. | 1 |
| tau = 0.0866 N m. | 1 |
| Total: 4 marks | 4 |
Answer: about 0.0866 N m
Fast method: tau = M B sin(60 degrees) = 0.1 x 0.866 = 0.0866 N m.
Sanity check: Units: A m² x T = N m. The torque lies between 0 and the maximum M B = 0.10 N m, which would occur if the plane were parallel to B; 0.0866 is below it.
Example 5 (hard, multi-step)
A proton of speed 4.0 x 10⁵ m/s enters a uniform field of 0.050 T at 60 degrees to the field direction. Find the pitch of its helical path, in cm, and its radius. Take mp = 1.67 x 10⁻27 kg and e = 1.6 x 10⁻19 C. Give the pitch.
| Step | Marks |
|---|---|
| Resolve the velocity: v_parallel = v cos 60 degrees = 2.0 x 10⁵ m/s and v_perpendicular = v sin 60 degrees = 3.46 x 10⁵ m/s. | 2 |
| The time for one turn is T = 2 pi m/(q B) = 2 pi x 1.67 x 10⁻27/(1.6 x 10⁻19 x 0.050) = 1.31 x 10⁻6 s. | 2 |
| Pitch = v_parallel x T = 2.0 x 10⁵ x 1.31 x 10⁻6 = 0.262 m = 26.2 cm. | 1 |
| Radius = m v_perpendicular/(q B) = 7.23 cm. | 1 |
| Total: 6 marks | 6 |
Answer: pitch about 26.2 cm, radius about 7.23 cm
Fast method: Pitch = 2 pi m v cos(theta)/(q B) = 2 pi x 3.34 x 10⁻22/8.0 x 10⁻21 = 0.262 m.
Sanity check: Units: m. The pitch (26 cm) uses cos 60 degrees and the radius uses sin 60 degrees; swapping them would give a pitch of 45 cm, which is wrong. At theta = 90 degrees the pitch would be zero, a flat circle, as it should be.
Example 6 (medium)
A galvanometer of resistance 50 ohm gives full-scale deflection for 2.0 mA. Find the shunt needed to read up to 1.0 A, in ohm.
| Step | Marks |
|---|---|
| The shunt carries I - Ig = 1.0 - 0.0020 = 0.998 A. | 1 |
| The shunt and the coil have the same voltage: S (I - Ig) = Ig G. | 1 |
| S = 0.0020 x 50/0.998 = 0.1002 ohm. | 1 |
| S is about 0.100 ohm, in parallel with the galvanometer. | 1 |
| Total: 4 marks | 4 |
Answer: about 0.100 ohm in parallel
Fast method: S = G/(n - 1) with n = 1.0/0.0020 = 500, so S = 50/499 = 0.1002 ohm.
Sanity check: Units: ohm. The shunt is far smaller than G, so the ammeter resistance (about 0.1 ohm) is low, as an ammeter should be; the ammeter resistance is S G/(S + G) = 0.1 ohm.
Example 7 (medium)
The same galvanometer (50 ohm, 2.0 mA full scale) is to be made into a voltmeter of range 0 to 10 V. Find the series resistance, in ohm.
| Step | Marks |
|---|---|
| At full scale the total resistance must be V/Ig = 10/0.0020 = 5000 ohm. | 1 |
| Total = G + R, so R = 5000 - 50. | 1 |
| R = 4950 ohm in series. | 1 |
| Total: 3 marks | 3 |
Answer: 4950 ohm in series
Fast method: R = V/Ig - G = 5000 - 50 = 4950 ohm.
Sanity check: Units: V/A = ohm. The voltmeter resistance (5000 ohm) is large compared with the galvanometer, as a voltmeter should be, and R is only slightly below it because G is small.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Lorentz force | F = q (E + v x B) | any charge q with velocity v in electric field E and magnetic field B | N | none |
| Radius in a perpendicular field | r = m v/(q B) = sqrt(2 m K)/(q B) | v perpendicular to uniform B; K is kinetic energy; non-relativistic | m | Example 2 |
| Period (cyclotron) | T = 2 pi m/(q B) | charge in uniform B; independent of speed; non-relativistic | s | Example 5 |
| Helix | pitch = 2 pi m v cos(theta)/(q B) | v at angle theta to uniform B; pitch = v_parallel x period | m | Example 5 |
| Velocity selector | v = E/B | E, B and v mutually perpendicular; charge moves undeflected | m/s | none |
| Force on a wire | F = I L B sin(theta) | straight wire in uniform B; theta is angle between wire and B | N | Example 1 |
| Parallel wires | F/L = mu0 I1 I2/(2 pi d) | two long parallel wires distance d apart; same direction attract | N/m | Example 3 |
| Torque on a loop | tau = N I A B sin(theta) | planar loop of N turns in uniform B; theta is angle between normal and B | N m (theta from normal to B) | Example 4 |
| Galvanometer deflection | theta = N B A I/k | radial field coil; deflection proportional to current; k is torsion constant | rad | none |
| Shunt and series resistance | S = Ig G/(I - Ig); R = V/Ig - G | ammeter shunt in parallel with G; voltmeter series resistor; Ig is full-scale current | ohm | Example 6 |
Common mistakes and speed
- Using the angle between the plane of the loop and B in tau = N I A B sin(theta). Why it tempts: The stem gives the plane angle; the formula needs the normal, and the complementary angle gives a tempting wrong option.
- Using the total length of a curved wire in F = I L B. Why it tempts: The length is the obvious number to use, but only the end-to-end displacement matters in a uniform field.
- Saying the magnetic field increases the speed or kinetic energy of a charge. Why it tempts: A force normally changes speed, but this one is always perpendicular to the velocity and does no work.
- Writing the shunt as Ig G/I instead of Ig G/(I - Ig). Why it tempts: The shunt current is I - Ig, but the total current I looks like the one to use, and the error is small when Ig is small.
- Adding the galvanometer resistance to V/Ig for the voltmeter series resistance. Why it tempts: Resistances in series add, so adding feels natural; the series resistor is the total V/Ig minus G.
- Thinking parallel currents in the same direction repel because like charges repel. Why it tempts: The electric analogy is familiar; for currents the rule is reversed, and same-direction currents attract.
Time per question and fast method
Target: about 110 seconds per question.
For a charge use r = m v/(q B) and compare ratios (same V: r proportional to sqrt(m/q); same speed: r proportional to m/q). For a bent wire use only the end-to-end vector. For a loop find the angle between the normal and B first. For meters use S = G/(n - 1) and R = V/Ig - G.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 5 correct. Pick an option for each question.
Practice
- An electron moves at 2.0 x 10⁶ m/s perpendicular to a uniform magnetic field of 1.0 millitesla. Take the… Verified (T1)
- A proton passes undeflected through a region where a uniform electric field of 3.0 x 10⁴ V/m and a uniform… Verified (T1)
- A wire ABCD lies in the x-y plane and carries a current of 4.0 A from A to D. AB is straight, 30 cm long,… Verified (T1)
- A moving coil galvanometer has a resistance of 40 ohm and gives full-scale deflection for 2.0 mA. The… Verified (T1)
- A galvanometer coil has 200 turns, each of area 2.5 x 10⁻4 m², and hangs in a radial field of 0.12 T. The… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Lorentz force: magnitude, direction and what it does
F = q (E + v x B). The magnetic part is q v B sin(theta), zero when v is along B. Direction for a positive charge from the right-hand rule: fingers along v, curled towards B, thumb along F; negative charges reverse it. Since F is perpendicular to v, power F . v is zero, so the magnetic field changes only the direction of velocity. A stationary charge feels no magnetic force. Units: F in newton, q in coulomb, v in m/s, B in tesla (1 T = 1 N/(A m)). Two charges of equal speed and different sign curve in opposite senses; an electron and a proton of the same momentum have the same radius.
Circular motion: radius, period and kinetic energy
r = m v/(q B) = p/(q B) = sqrt(2 m K)/(q B), where K is the kinetic energy. For a particle accelerated through potential V, K = q V and r = sqrt(2 m V/q)/B. For the same K and B, a lighter particle has a smaller radius; for the same V, r is proportional to sqrt(m/q). The period T = 2 pi m/(q B) and frequency q B/(2 pi m) do not depend on speed or radius, the basis of the cyclotron principle (not asked separately in the syllabus). Combined fields: a particle moves straight when q E = q v B, so v = E/B, which is the velocity selector; after leaving it the particle circles in B alone with r = m E/(q B²).
Helical motion and force on wires
For velocity at angle theta to B, radius = m v sin(theta)/(q B), pitch = 2 pi m v cos(theta)/(q B), and the speed along B is constant. Force on a wire: F = I L B sin(theta), with theta the angle between the wire and B. For a wire of any shape in a uniform B, F = I (L_eff x B), where L_eff is the straight vector from the start point to the end point; a closed loop therefore feels no net force. For a semicircle of radius R with its ends joined by a diameter, the force on the arc is 2 I R B sin(phi), where phi is the angle between the diameter and B (so 2 I R B when B is perpendicular to the diameter). Parallel currents attract, antiparallel repel: F per metre = 2 x 10⁻7 I1 I2/d, with currents in ampere and d in metre.
Torque on a loop and the galvanometer
tau = N I A B sin(theta), with theta between the area vector and B. The potential energy of the loop is -M B cos(theta). In a radial field the plane of the coil is always parallel to B, so tau = N I A B at every position and theta = N B A I/k. Sensitivity increases with N, A and B and decreases with k. Increasing the number of turns raises current sensitivity but also raises the galvanometer resistance, so voltage sensitivity need not rise. Ammeter: low resistance S G/(S + G), connected in series. Voltmeter: high resistance G + R, connected in parallel. A shunt of G/(n - 1) extends the range n times.
Common numerical patterns in JEE Main
Typical items: find the radius or period of a charged particle in a field, compare radii of different particles from the same V or K, find the pitch of a helix, find the force on a bent wire from its end points, find the force per metre between two wires or the position of a null point, find the torque on a loop whose plane makes a given angle with the field, and convert a galvanometer. Check the angle in every torque item: between the normal and B, not between the plane and B. Convert micro, milli and centimetre units before substituting. For a charge in both fields look first for the balance condition E = v B.
Memory hook
Suppose you swing a stone tied to a string in a circle at a steady speed, and the string always pulls at right angles to the stone motion.
- The string pull never speeds the stone up, it only turns its path, so the speed stays constant.
- A faster stone needs a longer string at the same pull, so its circle is bigger, while a stronger pull gives a smaller circle.
- A charge in a magnetic field is like the stone, with the magnetic force as the string pull.
The magnetic force is always at right angles to the velocity, so it does no work and gives circular motion of radius m v/(q B).
The field turns the charge but never speeds it up.
Revision card
Try to answer each without looking above.
- Write the Lorentz force and say why a magnetic force does no work.
- Give the radius and period of a charge moving perpendicular to B, and say what does not depend on speed.
- Give the pitch and radius of a helical path in terms of the angle to B.
- State the force between two parallel currents and the definition of the ampere.
- Write the torque on a current loop and say which angle it uses.
- Give the formulas for the shunt of an ammeter and the series resistance of a voltmeter.
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 2; fixed: 2
- Report: content/reviews/learn5-mag-2026-11-20.md
Textbook references
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 4: Moving Charges and Magnetism, Summary Summary (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 4: Moving Charges and Magnetism, Example 4.9 Example 4.9 (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 4: Moving Charges and Magnetism, 4.8 Force between Two Parallel Currents, the Ampere (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 4: Moving Charges and Magnetism, 4.9.1 Torque on a rectangular current loop in a uniform magnetic field (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 4: Moving Charges and Magnetism, 4.3 Motion in a Magnetic Field (read 2026-11-22)
Sources used
- NTA JEE (Main) 2026 syllabus, Physics, Unit 13 (https://jeemain.nta.nic.in/document/syllabus-2026/), read for scope
- Standard results of school-level magnetism and magnetic effects of current; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.