Biot-Savart and Ampere Law: JEE Main Notes
Reviewed Last updated 2026-11-20. Syllabus topic: Biot-Savart law and Ampere law.
In short. A current element I dl produces a field dB = (mu0/4 pi) I dl x r / r³ (Biot-Savart law). Summing it gives B = mu0 N I/(2R) at the centre of a circular coil, B = mu0 I/(2 pi r) near a long straight wire, and B = mu0 n I inside a long solenoid. Ampere law, the line integral of B round a closed path equals mu0 times the enclosed current, gives the last two quickly.
- Biot-Savart law: dB = (mu0/4 pi) I dl x r/r³, with mu0/4 pi = 10⁻7 T m/A; the field of a current element falls as 1/r².
- Circular coil, N turns, radius R: B = mu0 N I/(2R) at the centre; on the axis B = mu0 N I R²/(2 (R² + x²)^(3/2)).
- Ampere law: closed line integral of B . dl = mu0 I_enclosed; use a path where B is constant along it.
- Long straight wire: B = mu0 I/(2 pi r). Long solenoid: B = mu0 n I inside, close to zero outside, about half at an end.
- Direction comes from the right-hand rule; fields of several currents add as vectors.
Syllabus line: Magnetic Effects of Current and Magnetism Biot - Savart law and its application to the current carrying circular loop, Ampere's law and its applications to infinitely long current carrying straight wire and solenoid. Force on a moving charge in uniform magnetic and electric fields, force on a current-carrying conductor in a uniform magnetic field, the force between two parallel currents carrying conductors-definition of ampere, torque experienced by a current loop in a uniform magnetic field: Moving coil galvanometer, its sensitivity and conversion to ammeter and voltmeter. Current loop as a magnetic dipole and its magnetic dipole moment, bar magnet as an equivalent solenoid, magnetic field lines, magnetic field due to a magnetic dipole (bar magnet) along its axis and perpendicular to its axis, torque on a magnetic dipole in a uniform magnetic field, para-, dia- and ferromagnetic substances with examples, the effect of temperature on magnetic properties. (NTA JEE (Main) 2026 syllabus, Physics, Unit 13 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Current, drift velocity and Ohm law: Current as moving charge is the source of every magnetic field here. Read this first if current and charge flow are unclear.
- Electrostatics: electric field and force on a charge (lesson planned): Forces on charges and the idea of a field are used again. Read this first if field and force on a charge are unclear.
Related topics
- Force on charges and currents, galvanometer
- Magnetic dipole, bar magnet and magnetic materials
- Magnetic Effects of Current and Magnetism (lesson planned)
- Current Electricity (lesson planned)
The concept step by step
Moving charge makes a magnetic field
Oersted found that a current deflects a compass needle, so moving charge creates a magnetic field. The field is a vector, measured in tesla (T). Its direction at a point near a straight wire is along the circle around the wire, given by the right-hand rule: thumb along the current, fingers curl along the field. Unlike the electric field, the magnetic field of a current does not point towards or away from the source; it circulates around it.
Biot-Savart law for a current element
A small piece of wire of length dl carrying current I makes a field dB = (mu0/4 pi) I dl sin(theta)/r² at a point a distance r away, where theta is the angle between dl and the line joining the element to the point. In vector form dB = (mu0/4 pi) I (dl x r)/r³. The constant mu0/4 pi equals 10⁻7 T m/A exactly in the working values used in JEE Main. A point on the line of the element (theta = 0 or 180 degrees) receives no field from it.
Circular loop: centre and axis
Every element of a circular loop is perpendicular to the line joining it to the centre, and all are at the distance R. So the centre field of N turns is B = mu0 N I/(2R), all contributions pointing along the axis. On the axis at a distance x the perpendicular components cancel and B = mu0 N I R²/(2 (R² + x²)^(3/2)). A circular arc subtending angle phi at the centre gives B = (mu0 I/(4 pi R)) phi, so a semicircle gives mu0 I/(4R).
Ampere law and the long straight wire
Ampere law says that the line integral of B . dl round any closed path equals mu0 times the net current threading the path. For a long straight wire choose a circle of radius r around it: B is constant in size and along dl, so B (2 pi r) = mu0 I, giving B = mu0 I/(2 pi r). For a solid cylinder with uniform current, the enclosed current at radius r inside is I r²/a², so B = mu0 I r/(2 pi a²) inside and mu0 I/(2 pi r) outside.
Solenoid by Ampere law
A long solenoid has n turns per unit length. Take a rectangular path with one side inside, parallel to the axis, and the other outside where the field is negligible. The enclosed current is n L I for a side of length L, so B L = mu0 n L I and B = mu0 n I. The field inside is uniform and along the axis; at the end of a long solenoid it is about half, mu0 n I/2. Turns per unit length n, not the total number of turns, is what matters.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
A long straight wire carries a current of 10 A. Find the magnetic field at a point 5.0 cm from the wire. Take mu0 = 4 pi x 10⁻7 T m/A.
| Step | Marks |
|---|---|
| B = mu0 I/(2 pi r) for a long straight wire. | 1 |
| Substitute: B = 2 x 10⁻7 x 10/0.050. | 1 |
| B = 4.0 x 10⁻5 T = 40 microtesla. | 1 |
| Total: 3 marks | 3 |
Answer: 40 microtesla
Fast method: B = 2 x 10⁻7 I/r = 2 x 10⁻7 x 10/0.05 = 4 x 10⁻5 T.
Sanity check: Units: T. Doubling the distance would halve the field to 20 microtesla, and the size is comparable to the Earth's field (about 50 microtesla), so the order of magnitude is sensible.
Example 2 (easy)
A circular coil of 30 turns and radius 6.0 cm carries 1.5 A. Find the field at its centre, in microtesla.
| Step | Marks |
|---|---|
| B = mu0 N I/(2R) at the centre. | 1 |
| N I = 30 x 1.5 = 45 A turns and 2R = 0.12 m. | 1 |
| B = 4 pi x 10⁻7 x 45/0.12 = 4.71 x 10⁻4 T = 471 microtesla. | 1 |
| Total: 3 marks | 3 |
Answer: about 471 microtesla
Fast method: B = 1.257 x 10⁻6 x 45/0.12 = 4.71 x 10⁻4 T.
Sanity check: Units: T. One turn at the same radius would give 15.7 microtesla, and 30 turns give 30 times that, 471 microtesla.
Example 3 (medium)
A single circular loop of radius 3.0 cm carries 5.0 A. Find the field on its axis at 4.0 cm from the centre, in microtesla.
| Step | Marks |
|---|---|
| On the axis B = mu0 I R²/(2 (R² + x²)^(3/2)). | 1 |
| R² + x² = 9 + 16 = 25 cm² = 2.5 x 10⁻3 m², so (R² + x²)^(3/2) = (0.050)³ = 1.25 x 10⁻4 m³. | 1 |
| B = 4 pi x 10⁻7 x 5.0 x 9.0 x 10⁻4/(2 x 1.25 x 10⁻4). | 1 |
| B = 2.26 x 10⁻5 T = 22.6 microtesla. | 1 |
| Total: 4 marks | 4 |
Answer: about 22.6 microtesla
Fast method: Ratio to the centre field is (R/sqrt(R² + x²))³ = (3/5)³ = 0.216, and the centre field is mu0 I/(2R) = 104.7 microtesla, so B = 22.6 microtesla.
Sanity check: Units: T. The axial value (22.6) is less than the centre value (104.7), as it must be, and tends to the centre value when x tends to zero.
Example 4 (medium)
A thin-walled hollow cylindrical pipe of radius 3.0 cm carries a current of 15 A uniformly along its length. Find the magnetic field at 2.0 cm and at 6.0 cm from the axis. Give the field at 6.0 cm, in microtesla.
| Step | Marks |
|---|---|
| Take a circular Ampere path of radius r coaxial with the pipe: B (2 pi r) = mu0 I_enc. | 1 |
| At r = 2.0 cm the path is inside the wall, so I_enc = 0 and B = 0. | 1 |
| At r = 6.0 cm all 15 A is enclosed: B = mu0 I/(2 pi r) = 2 x 10⁻7 x 15/0.060. | 1 |
| B = 5.0 x 10⁻5 T = 50 microtesla at 6.0 cm (zero at 2.0 cm). | 1 |
| Total: 4 marks | 4 |
Answer: 0 at 2.0 cm and 50 microtesla at 6.0 cm
Fast method: Inside a hollow current-carrying pipe B = 0; outside it acts as if all the current were on the axis: 2 x 10⁻7 x 15/0.06.
Sanity check: Units: T. The field is continuous in size at the wall in the thin-wall limit: just outside at 3 cm it would be 100 microtesla, and it falls as 1/r to 50 microtesla at 6 cm.
Example 5 (hard, multi-step)
A long straight wire carries 10 A. A circular loop of radius 10 cm, carrying 10 A, lies in the same plane with the straight wire touching the loop at one point (without electrical contact). The currents are directed so that their fields at the centre of the loop add. Find the field at the centre, in microtesla.
| Step | Marks |
|---|---|
| Field of the loop at its centre: B1 = mu0 I/(2R) = 4 pi x 10⁻7 x 10/(2 x 0.10) = 62.8 microtesla. | 2 |
| The centre is at a perpendicular distance R = 0.10 m from the wire: B2 = mu0 I/(2 pi R) = 2 x 10⁻7 x 10/0.10 = 20.0 microtesla. | 2 |
| Both are normal to the plane and in the same sense, so B = 62.8 + 20.0 = 82.8 microtesla. | 1 |
| If the directions were opposite the field would be 62.8 - 20.0 = 42.8 microtesla. | 1 |
| Total: 6 marks | 6 |
Answer: about 82.8 microtesla (42.8 microtesla if the fields oppose)
Fast method: B = (mu0 I/(2R)) (1 + 1/pi) = 62.83 x 1.318 = 82.8 microtesla.
Sanity check: Units: T. The loop term is pi times the wire term (62.8 against 20.0), as the formulas mu0 I/(2R) and mu0 I/(2 pi R) predict; the sum lies between the two terms added and either one alone.
Example 6 (medium)
A solenoid 60 cm long has 1200 turns and carries 3.0 A. Find the field well inside it and at the middle of one end, in millitesla. Give the field inside.
| Step | Marks |
|---|---|
| Turns per metre n = 1200/0.60 = 2000. | 1 |
| Inside: B = mu0 n I = 4 pi x 10⁻7 x 2000 x 3.0. | 1 |
| B = 7.54 x 10⁻3 T = 7.54 millitesla inside. | 1 |
| At the end the field is about half, 3.77 millitesla. | 1 |
| Total: 4 marks | 4 |
Answer: about 7.54 millitesla inside; about 3.77 millitesla at an end
Fast method: n = 2000 per metre, so B = 1.257 x 10⁻6 x 2000 x 3 = 7.54 x 10⁻3 T.
Sanity check: Units: T. A solenoid field of a few millitesla from a few amperes is the usual size; the end value is half the middle value, as for an ideal long solenoid.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Biot-Savart law | dB = (mu0/4 pi) I dl x r / r³ | steady current element; field of one element, add vectors for a full wire | T (mu0/4 pi = 10⁻7 T m/A) | none |
| Centre of N-turn circular coil | B = mu0 N I/(2R) | at centre of a flat circular coil of N tight turns, radius R | T | Example 2 |
| Axis of circular coil | B = mu0 N I R²/(2 (R² + x²)^(3/2)) | on axis of circular coil, x measured from its centre | T | Example 3 |
| Arc of angle phi at its centre | B = mu0 I phi/(4 pi R) | at the centre of a circular arc of radius R; phi in radian | T (phi in radian) | none |
| Ampere law | closed line integral of B . dl = mu0 I_enc | steady currents; closed loop, I_enc is the net current through it | T m (A) | Example 4 |
| Long straight wire | B = mu0 I/(2 pi r) | infinitely long straight wire, r is perpendicular distance | T | Example 1 |
| Solid cylinder, inside (r < a) | B = mu0 I r/(2 pi a²) | inside a long solid cylinder with uniform current density | T | none |
| Long solenoid, inside | B = mu0 n I, n = N/L | deep inside a long ideal solenoid; n is turns per metre | T (n per metre) | Example 6 |
Common mistakes and speed
- Using the total number of turns N instead of turns per metre n in B = mu0 n I. Why it tempts: N is the number printed in the question and n has to be computed from it and the length; an option equal to mu0 N I is always offered.
- Adding the fields of two arcs or wires as scalars. Why it tempts: Magnitudes are easy to add; the directions of the two fields may be opposite, so their vector sum is a difference.
- Using B = mu0 I/(2 pi r) at a point inside a hollow or solid conductor. Why it tempts: The formula is remembered for a wire; inside the conductor only the enclosed current counts, giving zero for a hollow pipe and I r²/a² for a solid one.
- Taking the diameter as the radius, or leaving the radius in cm. Why it tempts: Stems give the diameter or centimetre values; a factor of 2 or 100 produces a plausible option.
- Forgetting that wire segments along the line to the point give no field. Why it tempts: Every drawn segment looks as if it should contribute, but dl x r = 0 when dl is along r.
Time per question and fast method
Target: about 100 seconds per question.
Memorise the three field sizes: mu0 N I/(2R) for a loop centre, mu0 I/(2 pi r) = 2 x 10⁻7 I/r for a long wire, mu0 n I for a solenoid. Convert cm to m first, take mu0 = 1.257 x 10⁻6, and use ratios when two situations differ by one change.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 5 correct. Pick an option for each question.
Practice
- A circular coil of 20 turns, each of radius 10 cm, carries a current of 5.0 A. Taking mu0 = 4 pi x 10⁻7 T… Verified (T1)
- Two concentric semicircular arcs, of radii 6.0 cm and 12 cm, are joined by straight radial segments along the… Verified (T1)
- A long straight solid cylindrical conductor of radius 4.0 cm carries a total current of 20 A, uniformly… Verified (T1)
- A long solenoid of length 50 cm has 400 turns and carries a current of 2.5 A. Taking mu0 = 4 pi x 10⁻7 T m/A,… Verified (T1)
- Two very long straight parallel wires, 20 cm apart, carry currents of 6.0 A and 9.0 A in opposite directions.… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Biot-Savart law: scope, directions and symmetry
dB = (mu0/4 pi) I dl x r/r³ is the field of a steady current element. It is used when the geometry has a clear symmetry that lets the integral be done: a circular loop, an arc, a straight segment. Direction: use the right-hand rule on dl x r. For several wires add the vectors, never the magnitudes unless all point the same way. Extension beyond the listed syllabus (Biot-Savart is named only for the circular loop, so treat this as a derived result, useful for wire-with-bends problems): for a straight segment of finite length seen from a point at perpendicular distance d, B = (mu0 I/(4 pi d)) (sin a + sin b), where a and b are the angles the ends make with the perpendicular; with both angles 90 degrees this becomes the infinite wire, mu0 I/(2 pi d). Elements along the line through the point contribute zero, a frequent source of free zeros in wire-with-bends problems.
Circular loop, arcs and combinations
Centre of a coil: B = mu0 N I/(2R), proportional to N and to 1/R. Arc of angle phi (radian): B = mu0 I phi/(4 pi R). Two coaxial or concentric loops: add vectors, with opposite currents subtracting. For concentric semicircular arcs joined by radial segments, the radial parts give zero, and the arcs give mu0 I/4 times (1/a plus or minus 1/b), plus when the currents circulate the same way and minus when they oppose. On the axis the field falls as 1/x³ for x much larger than R, which is the field of a dipole of moment N I pi R². Units: tesla; check R is in metre, not centimetre.
Ampere law: choosing the path and the enclosed current
The law holds for any closed path, but it gives B only when symmetry makes B constant along the path or perpendicular to it. Use a circle for a long straight wire or cylinder, a rectangle for a solenoid. The enclosed current counts only what passes through the surface bounded by the path: for a path inside a thin-walled hollow cylinder the enclosed current is zero, so B is zero inside. For a solid cylinder with uniform current density, enclosed current is proportional to the area, I r²/a². Currents in opposite directions through the path subtract. Fields obtained are those of the total current distribution, not just the enclosed part; Ampere law only fixes the line integral.
Long straight wire and parallel wires
B = mu0 I/(2 pi r) gives the field at distance r; it falls as 1/r, not 1/r². For two long parallel wires, add the vector fields: between wires carrying the same direction the fields oppose and cancel at one point; for opposite directions the fields between them add, and the null point lies outside, nearer the smaller current, where I1/x = I2/(x + d). Extension beyond the listed syllabus (derived from the Biot-Savart integral, not a listed application): for a wire that is straight with a semi-infinite end, the field at a point on the perpendicular through the end is mu0 I/(4 pi d), half the infinite-wire value. Direction at a point is perpendicular to the plane containing the wire and the point.
Solenoid: formula, ends and what is asked
Inside a long solenoid B = mu0 n I with n = N/L; the field is uniform across the section and does not depend on the radius. Near the middle the formula is accurate; at either end it is about mu0 n I/2. Outside a long ideal solenoid the field is nearly zero. With a core of relative permeability mu_r the field becomes mu0 mu_r n I. Typical JEE Main questions give the total turns and the length (so n = N/L, watch cm against m), ask what happens to B when the length doubles with the same wire, or compare solenoids of the same wire wound on different diameters. Winding a fixed length of wire into a solenoid: B depends on n and I, not on the diameter.
Memory hook
Suppose you wrap an insulated wire around a pencil to make a coil and connect it to a cell, then bring a small compass near it.
- One loop makes a weak field at its centre, just enough to turn the compass a little.
- Winding many turns close together makes the same current act many times, and the field inside grows with the turns per centimetre.
- Switching the cell round reverses the current, and the compass needle turns the other way.
The field of a coil grows with the turns and the current, and reverses with the current, as in B = mu0 n I.
Current circles the field; more turns per length means a stronger field.
Revision card
Try to answer each without looking above.
- Write the Biot-Savart law and say what the factor mu0/4 pi equals.
- Give the field at the centre of an N-turn circular coil and on its axis.
- State Ampere law and name the path you choose for a wire and for a solenoid.
- Give the field of a long straight wire and say how it varies with distance.
- Give the field inside a long solenoid, and say what it is at an end.
- Say why the field inside a hollow current-carrying pipe is zero.
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 2; fixed: 2
- Report: content/reviews/learn5-mag-2026-11-20.md
Textbook references
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 4: Moving Charges and Magnetism, Summary Summary (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 4: Moving Charges and Magnetism, 4.5 Magnetic Field on the Axis of a Circular Current Loop (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 4: Moving Charges and Magnetism, Example 4.7 Example 4.7 (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 4: Moving Charges and Magnetism, 4.1 Introduction (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 4: Moving Charges and Magnetism, 4.4 Magnetic Field due to a Current Element, Biot-Savart Law (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 4: Moving Charges and Magnetism, 4.6 Ampere's Circuital Law (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 4: Moving Charges and Magnetism, 4.7 The Solenoid (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 4: Moving Charges and Magnetism, Example 4.5 Example 4.5 (read 2026-11-22)
Sources used
- NTA JEE (Main) 2026 syllabus, Physics, Unit 13 (https://jeemain.nta.nic.in/document/syllabus-2026/), read for scope
- Standard results of school-level magnetism and magnetic effects of current; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.