EngineeringRise

Moment of Inertia and Axes Theorems: JEE Main Notes

Reviewed Last updated 2026-11-20. Syllabus topic: Moment of inertia, radius of gyration and axes theorems.

In short. Moment of inertia I = sum m r² measures resistance to angular acceleration about a chosen axis. Radius of gyration is k = sqrt(I/M). Parallel axes: I = I_cm + M d². Perpendicular axes (plane laminae only): I_z = I_x + I_y.

  • I depends on the axis chosen as well as on the mass distribution; it adds for parts about the same axis.
  • Standard values: ring M R², disc M R²/2, solid sphere 2 M R²/5, thin spherical shell 2 M R²/3, rod M L²/12 (centre) and M L²/3 (end).
  • Parallel axes theorem needs one axis through the centre of mass; the second axis is parallel at distance d.
  • Perpendicular axes theorem holds only for a flat body, with the three axes meeting at one point in the plane.
  • Radius of gyration k is the distance at which the whole mass would give the same I: I = M k².

Syllabus line: The moment of inertia, the radius of gyration, values of moments of inertia for simple geometrical objects, parallel and perpendicular axes theorems and their applications. (NTA JEE (Main) 2026 syllabus, Physics, Unit 5 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

Related topics

The concept step by step

  1. What moment of inertia measures

    A body resists a change in its rotation in the same way that mass resists a change in linear motion. The measure is the moment of inertia, I = sum of m r², where r is the perpendicular distance of each particle from the axis. Mass far from the axis counts for much more, because r is squared. That is why a ring is harder to spin than a disc of the same mass and radius: all its mass is at the largest distance.

  2. Standard values to remember

    About the central axis perpendicular to the plane: a ring M R², a disc or solid cylinder M R²/2. About a diameter: a ring M R²/2, a disc M R²/4. A solid sphere about a diameter 2 M R²/5, a thin spherical shell 2 M R²/3. A thin rod of length L: M L²/12 about its centre and M L²/3 about one end, both perpendicular to the rod. A rectangular plate of sides a and b about the perpendicular axis through its centre: M (a² + b²)/12.

  3. Radius of gyration

    Radius of gyration k is the distance from the axis at which the entire mass could be placed to give the same moment of inertia: I = M k², so k = sqrt(I/M), in metre. For a ring about its axis, k = R; for a disc k = R/sqrt(2); for a solid sphere about a diameter k = R sqrt(2/5); for a rod about its end k = L/sqrt(3). It depends on the axis, and rolling-motion formulas use the ratio k²/R² as the shape factor.

  4. Parallel axes theorem

    If the moment of inertia about an axis through the centre of mass is I_cm, then about any parallel axis at a distance d it is I = I_cm + M d². The centre-of-mass moment is always the smallest of all parallel axes. The theorem is used to shift from the centre to an edge, as for a rod about its end: M L²/12 + M (L/2)² = M L²/3, or a disc about a point on its rim: M R²/2 + M R² = 3 M R²/2. It cannot be used to move between two axes neither of which passes through the centre of mass without going through the centre first.

  5. Perpendicular axes theorem

    For a flat (laminar) body in the xy plane, I_z = I_x + I_y, where x and y are any two perpendicular axes in the plane and z is the axis perpendicular to the plane through their intersection. For a disc I_z = M R²/2, and symmetry makes I_x = I_y, so a diameter gives M R²/4. For a ring a diameter gives M R²/2. For a square plate the diagonal and the side axes through the centre have the same moment, because I_x = I_y for any pair of perpendicular axes by symmetry.

  6. Composite bodies and removed parts

    The moment of inertia of a composite body about a given axis is the sum of the moments of its parts about that same axis, each found with the parallel axes theorem if needed. A removed part is subtracted. For a disc with a hole, I = I_whole - I_hole, with I_hole taken about the same axis as the whole. Always keep the same axis for every part, and take masses from areas, lengths or volumes as the body requires.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

Four point masses of 0.50 kg each sit at the corners of a square of side 0.40 m. Find the moment of inertia about the axis through the centre and perpendicular to the square, in kg m².

Marks-style solution of example 1
StepMarks
Each corner is half a diagonal from the centre: r² = (0.20)² + (0.20)² = 0.080 m².1
I = 4 x 0.50 x 0.080.1
I = 0.16 kg m².1
Total: 3 marks3

Answer: 0.16 kg m²

Fast method: Total mass 2.0 kg and r² = a²/2 = 0.080, so I = 2.0 x 0.080 = 0.16 kg m².

Sanity check: Units: kg times m² gives kg m². Putting all the mass at the nearest side (r = 0.20 m) would give 0.080 kg m² and at the corner distance doubles it, so 0.16 lies where expected.

Example 2 (easy)

Find the radius of gyration of a uniform solid sphere of radius 0.50 m about a diameter, in metre.

Marks-style solution of example 2
StepMarks
I = (2/5) M R² about a diameter.1
k = sqrt(I/M) = R sqrt(2/5).1
k = 0.50 x 0.6325 = 0.316 m.1
Total: 3 marks3

Answer: about 0.316 m

Fast method: k = R sqrt(0.4) = 0.50 x 0.632 = 0.316 m.

Sanity check: Units: metre. k is less than R = 0.50 m and also below the disc value R/sqrt(2) = 0.354 m, as expected since k²/R² is 0.4 for the sphere against 0.5 for the disc.

Example 3 (medium)

A uniform ring of mass 3.0 kg and radius 0.40 m. Find its moment of inertia about a tangent lying in the plane of the ring, in kg m².

Marks-style solution of example 3
StepMarks
About a diameter: I_d = M R²/2 (perpendicular axes theorem, since I_z = M R² and I_x = I_y).1
The tangent in the plane is parallel to the diameter at distance R: I = I_d + M R².1
I = (3/2) M R² = 1.5 x 3.0 x 0.16.1
I = 0.72 kg m².1
Total: 4 marks4

Answer: 0.72 kg m²

Fast method: In-plane tangent of a ring: (3/2) M R² = 1.5 x 3.0 x 0.16 = 0.72 kg m².

Sanity check: Units: kg m². It is larger than the diameter value 0.24 and smaller than the tangent perpendicular to the plane, 2 M R² = 0.96, as expected.

Typical trap: Using 2 M R² (the tangent perpendicular to the plane). For a tangent in the plane the starting point is the diameter value M R²/2, not the axial M R².

Example 4 (medium)

A uniform rectangular plate of mass 12 kg has sides 0.60 m and 0.80 m. Find its moment of inertia about an axis perpendicular to the plate through a corner, in kg m².

Marks-style solution of example 4
StepMarks
About the central perpendicular axis: I_cm = M (a² + b²)/12 = 12 x (0.36 + 0.64)/12 = 1.0 kg m².1
A corner is at distance d = half the diagonal = 0.50 m from the centre, so d² = 0.25 m².1
I = I_cm + M d² = 1.0 + 12 x 0.25.1
I = 4.0 kg m².1
Total: 4 marks4

Answer: 4.0 kg m²

Fast method: About a corner, I = M (a² + b²)/3 = 12 x 1.0/3 = 4.0 kg m², four times the centre value.

Sanity check: Units: kg m². The corner axis gives exactly 4 times the central one here, since M d² = 3 I_cm for a rectangle, and the answer exceeds I_cm as the parallel axes theorem requires.

Example 5 (hard, multi-step)

A uniform disc of mass 8.0 kg and radius 0.50 m has a circular hole of radius 0.25 m whose centre is 0.25 m from the centre of the disc. Find the moment of inertia of the remaining part about the axis through the centre of the disc, perpendicular to its plane, in kg m².

Marks-style solution of example 5
StepMarks
Whole disc: I = (1/2) M R² = 0.5 x 8.0 x 0.25 = 1.0 kg m².1
Hole mass = 8.0 x (0.25/0.50)² = 2.0 kg.1
Hole about its own centre: (1/2)(2.0)(0.25)² = 0.0625; shift by 0.25 m: + 2.0 x 0.0625 = 0.125; so I_hole = 0.1875 kg m².2
I_remaining = 1.0 - 0.1875 = 0.8125 kg m².1
Total: 5 marks5

Answer: 0.8125 kg m²

Fast method: Both moments are about the same axis: I = (13/32) M R² = 0.40625 x 8.0 x 0.25 = 0.8125 kg m².

Sanity check: Units: kg m². The result 0.8125 is below the whole 1.0 and positive. A hole of zero size would leave 1.0 and the answer reduces to that as the hole shrinks.

Example 6 (hard, multi-step)

A uniform rod of mass 3.0 kg and length 1.2 m carries a particle of mass 1.0 kg at each end. Find the moment of inertia of the system about an axis perpendicular to the rod, 0.30 m from one end, in kg m².

Marks-style solution of example 6
StepMarks
Rod about its centre: M L²/12 = 3.0 x 1.44/12 = 0.36 kg m².1
The centre of the rod is 0.60 - 0.30 = 0.30 m from the axis: add 3.0 x 0.09 = 0.27, so the rod gives 0.63 kg m².2
End particles are 0.30 m and 0.90 m from the axis: 1.0 x 0.09 + 1.0 x 0.81 = 0.90 kg m².1
Total I = 0.63 + 0.90 = 1.53 kg m².1
Total: 5 marks5

Answer: 1.53 kg m²

Fast method: Parts about the same axis add: rod (0.36 + 0.27) plus particles (0.09 + 0.81) = 1.53 kg m².

Sanity check: Units: kg m². A check by the position of the axis: about the centre the system has 0.36 + 2 x 1.0 x 0.36 = 1.08 kg m², and a shift of 0.30 m adds 5.0 x 0.09 = 0.45, giving 1.53 kg m² as well.

Formulas and units

Formula and unit box for Moment of inertia, radius of gyration and axes theorems
ResultFormulaValid whenUnits or noteWorked example
DefinitionI = sum m r² = integral of r² dmrotation about a stated axis; r is distance from that axiskg m²Example 1
Radius of gyrationk = sqrt(I/M)any rigid body; I about the same axis as kmExample 2
Ring, disc (central normal axis)M R²; M R²/2uniform ring and disc; axis through centre, perpendicular to planekg m²Example 3
Ring, disc (diameter)M R²/2; M R²/4uniform ring and disc; axis along a diameterkg m²Example 3
Solid sphere, hollow sphere (diameter)2 M R²/5; 2 M R²/3uniform solid sphere and thin hollow shell; axis along a diameterkg m²Example 2
Thin rod (centre, end)M L²/12; M L²/3uniform thin rod; axis perpendicular to rod, through centre or endkg m²Example 6
Rectangular plate (central normal axis)M (a² + b²)/12uniform thin rectangular plate; axis through centre, perpendicular to platekg m²Example 4
Parallel axes theoremI = I_cm + M d²I_cm is about an axis through the centre of mass; second axis parallel at distance dkg m²Example 3
Perpendicular axes theoremI_z = I_x + I_y (plane lamina)thin plane lamina only; x and y in the plane, z perpendicular, meeting at one pointkg m²Example 3

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Using the parallel axes theorem between two axes neither of which passes through the centre of mass. Why it tempts: The formula looks symmetric in the two axes; the theorem needs I_cm on one side, and an axis already off-centre has to be brought back to the centre first.
  • Applying the perpendicular axes theorem to a sphere, cylinder or any thick body. Why it tempts: It worked for the disc and the ring; it holds only for thin plane laminae with the two axes in the plane.
  • Taking the tangent in the plane of a disc or ring as the tangent perpendicular to the plane. Why it tempts: Both are called tangents, and options like 3/2 M R² and 5/4 M R² for the disc differ only in this detail.
  • Subtracting the moment of inertia of a hole about its own centre rather than about the common axis. Why it tempts: The hole is a small disc whose standard formula is known, so the parallel-axes shift is forgotten.
  • Using M L²/12 for a rod hinged at its end. Why it tempts: M L²/12 is the first formula recalled; the end-axis value is four times larger, M L²/3.

Time per question and fast method

Target: about 105 seconds per question.

Write the standard coefficient (ring 1, disc 1/2, solid sphere 2/5, hollow sphere 2/3, rod 1/12 or 1/3) and then only add M d² when the axis is off the centre. For planar bodies get the in-plane moment from I_z/2 and the perpendicular axes theorem before using the parallel axes theorem. Subtract holes about the same axis.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. What is the moment of inertia of a ring of mass 2.0 kg and radius 0.30 m about its central axis, in kg m²?
Show the answer

Answer: A: 0.18. I = M R² = 2.0 x 0.09 = 0.18 kg m².

Question 2. What is the moment of inertia of a disc of mass 4.0 kg and radius 0.50 m about its central axis, in kg m²?
Show the answer

Answer: C: 0.5. I = (1/2) M R² = 0.5 x 4.0 x 0.25 = 0.50 kg m².

Question 3. A body has I_cm = 2.0 kg m² and mass 5.0 kg. What is I about a parallel axis 0.40 m from the centre of mass, in kg m²?
Show the answer

Answer: A: 2.8. I = 2.0 + 5.0 x 0.16 = 2.8 kg m².

Question 4. A body of mass 2.0 kg has I = 8.0 kg m² about an axis. What is its radius of gyration, in metre?
Show the answer

Answer: B: 2.0 m. k = sqrt(I/M) = sqrt(4.0) = 2.0 m.

Question 5. For a flat plate, I_x = I_y = 0.30 kg m² about two perpendicular axes in its plane. What is I about the perpendicular axis through their intersection, in kg m²?
Show the answer

Answer: C: 0.60. Perpendicular axes theorem: I_z = I_x + I_y = 0.60 kg m².

Question 6. Which condition must hold for the perpendicular axes theorem to apply?
Show the answer

Answer: A: The body is a thin plane lamina. The theorem holds only for plane laminae, with the two axes in the plane and the third perpendicular to it, all through the same point.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Definition, units and dimension

For particles I = sum m_i r_i², and for a continuous body I = integral of r² dm, with r the perpendicular distance from the chosen axis. The unit is kg m² and the dimension M L². I is a scalar for a fixed axis, depends on the axis, is additive for bodies about the same axis, and is always positive. In rotation it plays the role of mass: L = I w, tau = I alpha and KE = (1/2) I w². Two bodies of equal mass can have very different I, which is why a ring and a disc of the same mass and radius accelerate differently under the same torque, and the same body has a different I about different axes.

Standard results for simple geometrical objects

Perpendicular to the plane through the centre: ring M R²; disc M R²/2. About a diameter: ring M R²/2; disc M R²/4. Solid cylinder about its axis M R²/2; hollow thin cylinder about its axis M R². Solid sphere about a diameter 2 M R²/5; hollow thin spherical shell 2 M R²/3. Thin uniform rod perpendicular to its length: M L²/12 through the centre and M L²/3 through an end. Rectangular lamina about the perpendicular axis through the centre M (a² + b²)/12; about an axis in the plane through the centre parallel to side b, M a²/12 (a is the side perpendicular to the axis). These should be memorised at the level of ratio: the more mass is at the rim, the larger the coefficient.

Parallel axes theorem: statement, conditions, uses

I = I_cm + M d², where the axis of I_cm passes through the centre of mass and the second axis is parallel to it at distance d. The extra M d² is always positive, so the centre of mass axis gives the minimum I of all parallel axes. For a ring about a tangent perpendicular to the plane, I = M R² + M R² = 2 M R². For a disc about a tangent perpendicular to the plane, I = 3 M R²/2. For two off-centre parallel axes at distances d1 and d2 on the same side, I2 - I1 = M (d2² - d1²). The common error is to use d as the distance from a non-centre axis, or to apply the theorem when the first axis is not through the centre of mass.

Perpendicular axes theorem: statement, conditions, uses

For a plane lamina of negligible thickness lying in the xy plane, I_z = I_x + I_y, with all three axes through the same point O. It does not apply to three-dimensional bodies (a sphere or thick cylinder), and the x and y axes must be in the plane of the body. Uses: the moment of inertia of a disc, ring or square plate about a diameter, or about a tangent in the plane (disc: M R²/4 + M R² = 5 M R²/4; ring: M R²/2 + M R² = 3 M R²/2). A square plate of mass M and side a has I_z = M a²/6 about the central normal, so about each central in-plane axis through its centre M a²/12, and about a diagonal also M a²/12.

Composite bodies, holes, radius of gyration and what is tested

Add the moments of the parts about the same axis; subtract those of removed parts. For a rod with end masses, for a frame of rods, for a disc with a hole, shift each part with the parallel axes theorem. Radius of gyration k = sqrt(I/M); the shape factor k²/R² is 1 for a ring, 1/2 for a disc, 2/5 for a solid sphere and 2/3 for a hollow sphere. Items: standard I and k, tangent and diagonal axes through the theorems, composite and cut-out bodies, and comparison of ring, disc and sphere. Check by limiting cases: moving the axis away from the centre of mass must increase I, and subtracting a hole must leave a positive I smaller than the whole.

Memory hook

Suppose two bicycle wheels of the same mass and size are spun by hand on their axles, one an ordinary spoked wheel with the mass mostly at the rim and the other a solid disc-shaped cart wheel.

  1. Pushing the rim of each with the same force for the same time, the solid disc picks up speed more quickly, because the same mass is, on average, nearer the axle.
  2. The rimmed wheel keeps spinning for longer once it is going: its mass sits far from the axis, so it has the larger moment of inertia.
  3. Now suppose you hold the rimmed wheel at its edge and spin it about that point instead of the axle: it becomes harder again, because the axis has moved away from the centre of mass.

I = sum m r² grows with distance from the axis, so a ring is harder to turn than a disc and any off-centre axis adds M d².

Mass far from the axis counts squared; shifting the axis away from the centre adds M d².

Revision card

Try to answer each without looking above.

  1. Define moment of inertia and radius of gyration and give their units.
  2. Write I for a ring, a disc, a solid sphere and a hollow sphere (central or diameter axis).
  3. Write I for a thin rod about its centre and about its end.
  4. State the parallel axes theorem with its condition.
  5. State the perpendicular axes theorem with its condition and use it to get a disc about a diameter.
  6. Explain how to find I of a body with a hole or of a composite body.

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 1; fixed: 1
  • Report: content/reviews/learn3-rot-2026-11-20.md

Textbook references

  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 6: Systems of Particles and Rotational Motion, 6.9 MOMENT OF INERTIA (read 2026-11-22)

Sources used

  • NTA JEE (Main) 2026 syllabus, Physics, Unit 5 (https://jeemain.nta.nic.in/document/syllabus-2026/), read for scope
  • Standard results of mechanics at school and JEE Main level; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.