EngineeringRise

Rolling and Equations of Rotational Motion: JEE Main

Reviewed Last updated 2026-11-20. Syllabus topic: Rolling and equations of rotational motion.

In short. For rotation about a fixed axis tau = I alpha and KE = (1/2) I w². Rolling without slipping has v_cm = w R and kinetic energy (1/2) m v² (1 + k²/R²). On an incline a = g sin(theta)/(1 + k²/R²) and static friction does no work.

  • Rotational analogues: mass to I, force to torque, a to alpha, p to L, (1/2) m v² to (1/2) I w², F v to tau w.
  • Pure rolling: contact point is at rest, v_cm = w R and a_cm = alpha R.
  • Kinetic energy of rolling = translation + rotation = (1/2) m v² + (1/2) I w² = (1/2) m v² (1 + k²/R²).
  • Down an incline, a = g sin(theta)/(1 + k²/R²): the smaller the k²/R², the faster it goes; ring slowest, solid sphere fastest of the standard shapes.
  • Friction needed to roll: mu >= tan(theta) (k²/R²)/(1 + k²/R²); static friction does no work in pure rolling.

Syllabus line: Equilibrium of rigid bodies, rigid body rotation and equations of rotational motion, comparison of linear and rotational motions. (NTA JEE (Main) 2026 syllabus, Physics, Unit 5 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

Related topics

The concept step by step

  1. Newton second law for rotation

    For rotation about a fixed axis, or about the centre of mass of a body that is also moving, the net external torque is tau = I alpha, with I about that axis. It is the rotational partner of F = m a. Torque is in N m, I in kg m² and alpha in rad/s². The work done by a constant torque is W = tau theta, the rotational kinetic energy is (1/2) I w², and the power is P = tau w, each matching its linear form with force replaced by torque and displacement by angle.

  2. Linear and rotational motion compared

    Position x corresponds to angle theta, velocity v to w, acceleration a to alpha, mass m to I, force F to torque tau, momentum p to L, kinetic energy (1/2) m v² to (1/2) I w² and power F v to tau w. Every linear result becomes a rotational one with these swaps: F = m a gives tau = I alpha; v² = u² + 2 a s gives w² = w0² + 2 alpha theta. The link between the two is s = r theta, v = r w and a_t = r alpha for a point at distance r.

  3. Rolling without slipping

    A wheel rolls without slipping when the point touching the ground has zero velocity. The centre then moves with v_cm = w R and a_cm = alpha R, and a point at the top moves at 2 v_cm. Rolling is a combination of translation of the centre of mass and rotation about it. The friction needed is static, and in pure rolling it does no work because its point of application is instantaneously at rest, so mechanical energy is conserved on a rolling descent.

  4. Energy of rolling bodies

    The total kinetic energy of a rolling body is the sum of the translational part (1/2) m v² and the rotational part (1/2) I w² about the centre of mass. With I = m k² and w = v/R this is (1/2) m v² (1 + k²/R²). The fractions of the total are 1/(1 + k²/R²) translational and (k²/R²)/(1 + k²/R²) rotational: for a ring 1/2 and 1/2, for a disc 2/3 and 1/3, for a solid sphere 5/7 and 2/7. Use energy conservation to find speed after descending a height h: v² = 2 g h/(1 + k²/R²).

  5. Rolling on an incline

    On an incline of angle theta, m g sin(theta) - f = m a for translation, and f R = I alpha = I a/R for rotation, so a = g sin(theta)/(1 + k²/R²) and f = m g sin(theta) (k²/R²)/(1 + k²/R²). The body keeps rolling only if f does not exceed mu m g cos(theta), that is mu >= tan(theta) (k²/R²)/(1 + k²/R²). With less friction it slips as it rolls. On a smooth incline a body slides at g sin(theta), without rotating.

  6. Rotation with strings, pulleys and sliding to rolling

    When a block hangs from a string wound on a pulley with moment of inertia I, the string tension differs on each side of the pulley, and the pulley obeys (T1 - T2) R = I alpha with alpha = a/R. This gives a = (m1 - m2) g/(m1 + m2 + I/R²). A body that starts sliding with kinetic friction decelerates linearly while friction speeds up its rotation, until v = w R; after that it rolls with constant speed. Angular momentum about the contact point (or a point on the surface line) is conserved during this phase because friction has no torque about it.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

A wheel of moment of inertia 2.5 kg m² is acted on by a constant torque of 10 N m from rest. Find its angular speed after 3.0 s, in rad/s.

Marks-style solution of example 1
StepMarks
alpha = tau/I = 10/2.5 = 4.0 rad/s².1
w = alpha t = 4.0 x 3.0.1
w = 12 rad/s.1
Total: 3 marks3

Answer: 12 rad/s

Fast method: w = (tau/I) t = 4.0 x 3.0 = 12 rad/s.

Sanity check: Units: N m divided by kg m² gives rad/s² (the radian is dimensionless), and times s gives rad/s. A larger torque or smaller I gives a larger speed, as expected.

Example 2 (easy)

A uniform solid disc of mass 2.0 kg rolls without slipping at 3.0 m/s on a horizontal floor. Find its total kinetic energy, in joule.

Marks-style solution of example 2
StepMarks
Translational KE = (1/2) m v² = 0.5 x 2.0 x 9.0 = 9.0 J.1
Rotational KE = (1/2)(m R²/2)(v/R)² = (1/4) m v² = 4.5 J.1
Total = 9.0 + 4.5 = 13.5 J.1
Total: 3 marks3

Answer: 13.5 J

Fast method: KE = (1/2) m v² (1 + 1/2) = 9.0 x 1.5 = 13.5 J.

Sanity check: Units: kg m²/s² = J. The total is larger than the translational part 9.0 J by one half, since for a disc k²/R² = 1/2.

Example 3 (medium)

A uniform solid sphere starts from rest and rolls without slipping down an incline 2.8 m long at 30 degrees to the horizontal. Take g = 10 m/s². Find its speed at the bottom, in m/s.

Marks-style solution of example 3
StepMarks
Height lost h = 2.8 x sin 30 degrees = 1.4 m.1
Energy: m g h = (1/2) m v² (1 + 2/5), since friction does no work in rolling.2
v² = 2 g h/1.4 = 2 x 10 x 1.4/1.4 = 20 m²/s².1
v = 4.47 m/s.1
Total: 5 marks5

Answer: about 4.47 m/s

Fast method: v² = 2 g h/(1 + k²/R²) = 28/1.4 = 20, so v = 4.47 m/s; a frictionless slide would give sqrt(28) = 5.29 m/s.

Sanity check: Units: m/s. The rolling speed 4.47 m/s is less than the sliding speed 5.29 m/s from the same height, as some energy is stored in rotation.

Example 4 (medium)

What is the least coefficient of static friction for a uniform solid sphere to roll without slipping down an incline of 45 degrees?

Marks-style solution of example 4
StepMarks
Rolling needs f = m g sin(theta) (k²/R²)/(1 + k²/R²) = (2/7) m g sin(theta).1
Normal reaction N = m g cos(theta).1
Need f = (2/7) tan(theta).1
At 45 degrees tan = 1, so mu >= 2/7 = 0.286.1
Total: 4 marks4

Answer: about 0.286

Fast method: mu_min = (2/7) tan 45 degrees = 0.286.

Sanity check: The coefficient is dimensionless. It is below tan(theta) = 1, the value needed to hold a block at rest, as the friction needed to make a sphere roll is only 2/7 of the component of weight along the slope.

Typical trap: Using mu >= tan(theta). That is the condition for a block to stay at rest on the slope. A rolling body needs only the fraction (k²/R²)/(1 + k²/R²) of that.

Example 5 (hard, multi-step)

Blocks of 5.0 kg and 3.0 kg hang from a string passing over a uniform disc pulley of mass 4.0 kg and radius 0.20 m with no slipping. Take g = 10 m/s². Find the tension in the string on the 5.0 kg block side, in newton.

Marks-style solution of example 5
StepMarks
Let a be the acceleration. For the 5.0 kg block: 5.0 g - T1 = 5.0 a. For the 3.0 kg block: T2 - 3.0 g = 3.0 a.1
Pulley: (T1 - T2) R = (1/2) M R² (a/R), so T1 - T2 = (M/2) a = 2.0 a.2
Adding: (5.0 - 3.0) g = (5.0 + 3.0 + 2.0) a, so a = 20/10 = 2.0 m/s².1
T1 = 5.0 (10 - 2.0) = 40 N (and T2 = 36 N).1
Total: 5 marks5

Answer: 40 N

Fast method: a = (m1 - m2) g/(m1 + m2 + M/2) = 20/10 = 2.0 m/s², then T1 = m1 (g - a) = 40 N.

Sanity check: Units: N. T1 = 40 N exceeds T2 = 36 N by (M/2) a = 4.0 N; with a massless pulley both tensions would be equal at 37.5 N, which lies between them as it should.

Example 6 (hard, multi-step)

A uniform rod of length 1.2 m, hinged at one end, is released from the horizontal position. Take g = 10 m/s². Find the acceleration of its free end just after release, in m/s².

Marks-style solution of example 6
StepMarks
Torque about the hinge from the weight at the centre: tau = M g (L/2).1
I = M L²/3, so alpha = tau/I = 3 g/(2 L) = 30/2.4 = 12.5 rad/s².2
At release w = 0, so the free end has only tangential acceleration a = alpha L.1
a = 12.5 x 1.2 = 15 m/s², which is greater than g.1
Total: 5 marks5

Answer: 15 m/s², downward

Fast method: a_end = (3/2) g = 15 m/s² for any length, since alpha L = 3 g/2.

Sanity check: Units: rad/s² times m gives m/s². The end accelerates faster than free fall (15 against 10 m/s²) because the end is rigidly tied to the rest of the rod, the hinge holds the inner part back, and the rod transmits torque so that the outer part is pushed down faster than free fall (a = alpha L = 3g/2 follows from tau = I alpha), and the answer is independent of the mass and the length.

Formulas and units

Formula and unit box for Rolling and equations of rotational motion
ResultFormulaValid whenUnits or noteWorked example
Rotational second lawtau = I alpharigid body, fixed axis or axis through centre of mass; tau and I about same axisN mExample 1
Rotational kinetic energy and powerKE = (1/2) I w²; P = tau w; W = tau thetarigid body rotating about a fixed axis; w in rad/s; W = tau theta for constant torqueJ (W)Example 2
Rolling without slippingv_cm = w R; a_cm = alpha Rpure rolling (no slipping) on a fixed surfacem/s (m/s²)Example 2
Kinetic energy of rollingKE = (1/2) m v² (1 + k²/R²)pure rolling; k is radius of gyration about the axis through the centreJExample 2
Shape factor k²/R²ring 1; disc 1/2; solid sphere 2/5; hollow sphere 2/3uniform bodies; k is about the central axisdimensionlessExample 2
Acceleration down an inclinea = g sin(theta)/(1 + k²/R²)pure rolling down a rough incline, no slippingm/s²none
Friction and minimum mu for rollingf = m g sin(theta) (k²/R²)/(1 + k²/R²); mu >= tan(theta) (k²/R²)/(1 + k²/R²)pure rolling down a rough incline; static frictionNExample 4
Massive pulley with two blocksa = (m1 - m2) g/(m1 + m2 + I/R²)string does not slip on the pulley; uniform pulley I; blocks move with the stringm/s²Example 5
Sliding to rolling (from v0, no spin)v = v0/(1 + k²/R²)sliding with speed v0 and no spin on a rough horizontal surface until rolling startsm/snone

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Using a = g sin(theta) for a body that rolls. Why it tempts: It is the standard incline result and appears as an option; it holds only for frictionless sliding.
  • Writing only the translational kinetic energy for a rolling body. Why it tempts: The speed is given as a linear speed, so (1/2) m v² looks complete; the rotation adds (1/2) I w².
  • Treating friction as doing negative work in pure rolling. Why it tempts: Friction usually dissipates energy; in pure rolling its point of application is at rest, so it does no work and mechanical energy is conserved.
  • Taking equal tensions on both sides of a pulley that has mass. Why it tempts: Equal tension is the rule for a light pulley; a pulley with moment of inertia needs a difference T1 - T2 to accelerate it.
  • Using the condition mu >= tan(theta) for rolling. Why it tempts: It is the condition for staying at rest, which looks like the limiting case, but rolling needs only (k²/R²)/(1 + k²/R²) of tan(theta).

Time per question and fast method

Target: about 100 seconds per question.

For any rolling-down-incline item write the shape factor first (ring 1, disc 1/2, solid sphere 2/5, hollow sphere 2/3) and use a = g sin(theta)/(1 + factor) and v² = 2 g h/(1 + factor). For a massive pulley use a = net weight difference over (total mass + M/2). For sliding to rolling use angular momentum about the surface line.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. A torque of 12 N m acts on a body of I = 4.0 kg m². What is alpha, in rad/s²?
Show the answer

Answer: A: 3.0. alpha = tau/I = 12/4.0 = 3.0 rad/s².

Question 2. A wheel of radius 0.15 m rolls without slipping with w = 20 rad/s. What is the speed of its centre, in m/s?
Show the answer

Answer: C: 3.0. v = w R = 20 x 0.15 = 3.0 m/s.

Question 3. A hollow thin cylinder rolls without slipping down a 30 degree incline. With g = 10 m/s², what is its acceleration, in m/s²?
Show the answer

Answer: C: 2.5. a = g sin(theta)/(1 + 1) = 10 x 0.5/2 = 2.5 m/s².

Question 4. A ring rolls without slipping. What fraction of its total kinetic energy is translational?
Show the answer

Answer: A: 1/2. Fraction = 1/(1 + k²/R²) = 1/(1 + 1) = 1/2.

Question 5. A motor delivers 12 N m at 50 rad/s. What is the power, in watt?
Show the answer

Answer: C: 600 W. P = tau w = 12 x 50 = 600 W.

Question 6. Why does static friction do no work on a body rolling without slipping on a fixed surface?
Show the answer

Answer: A: Its point of application is instantaneously at rest. The contact point has zero velocity, so the friction force acting there has zero power and mechanical energy is conserved.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Rotation about a fixed axis: equations and the energy and power forms

tau_net = I alpha about the fixed axis. Equations of rotation with constant alpha: w = w0 + alpha t, theta = w0 t + alpha t²/2, w² = w0² + 2 alpha theta. Work W = integral of tau d theta (tau theta if constant); work-energy theorem W = change in (1/2) I w²; power P = tau w. For a rod or door hinged at one end and released from rest, the initial angular acceleration is tau/I with torque from the weight at the centre of mass, giving alpha = 3 g/(2 L) for a rod released from the horizontal; the free end then has acceleration alpha L = 3 g/2, greater than g. Units: N m, kg m², rad/s², J, W. For a rotating body that is also translating, tau = I_cm alpha holds about the centre of mass.

Comparison table of linear and rotational motion

Linear to rotational: displacement s to theta; velocity v to w; acceleration a to alpha; mass m to I; force F to tau; momentum p to L = I w; Newton second law F = m a to tau = I alpha; F = dp/dt to tau = dL/dt; kinetic energy (1/2) m v² to (1/2) I w²; work F s to tau theta; power F v to tau w; conservation of p to conservation of L. Linking relations for a point at radius r: s = r theta, v = r w, a_t = r alpha, a_c = w² r. The analogy fails in one respect: mass is a property of the body, but I depends on the axis, so it must always be stated about which axis.

Pure rolling: kinematics and energy

Rolling without slipping on a fixed surface: the point of contact is instantaneously at rest, v_cm = w R, a_cm = alpha R, and a point at the top moves at 2 v_cm. About the contact point, the motion is a pure rotation with w, and the total kinetic energy is (1/2) I_contact w² with I_contact = I_cm + m R², which equals (1/2) m v² (1 + k²/R²). Shape factors k²/R²: ring or hollow cylinder 1, solid cylinder or disc 1/2, solid sphere 2/5, hollow sphere 2/3. Static friction at the contact point does no work, so mechanical energy is conserved for a body rolling down a surface without slipping; with sliding, friction dissipates energy.

Rolling down an incline: acceleration, friction, time and the ranking

a = g sin(theta)/(1 + k²/R²), independent of mass and radius. Smaller k²/R² means larger acceleration, so the order from the fastest is solid sphere (5/7 g sin), solid cylinder (2/3), hollow sphere (3/5), ring (1/2). A body that slides without friction has a = g sin(theta), the maximum; rolling is slower because some of the energy goes into rotation. The friction force f = m g sin(theta) (k²/R²)/(1 + k²/R²) acts up the slope, and the condition for no slipping is mu >= tan(theta) (k²/R²)/(1 + k²/R²), which for a solid sphere is (2/7) tan(theta). Speed at the bottom after falling a height h: v = sqrt(2 g h/(1 + k²/R²)); the time to reach the bottom is t = sqrt(2 s/a).

Pulley problems, sliding to rolling, and what examiners test

Massive pulley with blocks m1 > m2: a = (m1 - m2) g/(m1 + m2 + I/R²), T1 - T2 = I a/R²; for a disc pulley I/R² = M/2. A string wound on a disc free to turn (yo-yo fixed): a = m g/(m + M/2). A body projected on a rough surface with v0 and no spin reaches rolling at v = v0/(1 + k²/R²), by conservation of angular momentum about the surface; for a solid sphere 5 v0/7, with a fraction 2/7 of the energy lost. Items: ranking of bodies on an incline, a, v or t down an incline, friction and the minimum mu, pulley with mass, rod released from horizontal, and sliding-to-rolling. Check limiting cases: a pulley with M = 0 gives the textbook value, and a hoop on a very smooth slope slides with a = g sin(theta).

Memory hook

Suppose two steel balls of the same size, one solid and one a thin hollow shell, both of the same mass, are let go together from the top of a slightly sloping board in a school corridor.

  1. The solid ball reaches the bottom first. Both lose the same height, so the same energy is released, but the hollow ball must put a larger share of it into spinning.
  2. A third object, a thin hoop, is slower still: half of its energy goes into spinning, so it is the slowest of the three.
  3. If the board were oiled so that nothing could grip, all three would simply slide and reach the bottom together, because then nothing would start them spinning.

Rolling shares the released energy between translation and rotation, so a = g sin(theta)/(1 + k²/R²) is smaller when k²/R² is larger.

The more the mass sits at the rim, the more energy spins and the slower it rolls.

Revision card

Try to answer each without looking above.

  1. Write tau = I alpha, rotational KE and power, and list the linear-rotational analogues.
  2. State the condition for rolling without slipping and the speed of the top point.
  3. Write the kinetic energy of a rolling body in terms of v and k²/R².
  4. Write a = g sin(theta)/(1 + k²/R²) and rank ring, hollow sphere, disc and solid sphere.
  5. Give the minimum mu for rolling on an incline and explain why friction does no work.
  6. Write the acceleration of two blocks over a pulley that has moment of inertia I.

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 2; fixed: 2
  • Report: content/reviews/learn3-rot-2026-11-20.md

Textbook references

  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 6: Systems of Particles and Rotational Motion, 6.11 DYNAMICS OF ROTATIONAL MOTION ABOUT A FIXED AXIS (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 6: Systems of Particles and Rotational Motion, Table 6.2 Comparison of Translational and Rotational Motion (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 6: Systems of Particles and Rotational Motion, 6.1 INTRODUCTION (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 6: Systems of Particles and Rotational Motion, 6.1.1 What kind of motion can a rigid body have? (read 2026-11-22)

Sources used

  • NTA JEE (Main) 2026 syllabus, Physics, Unit 5 (https://jeemain.nta.nic.in/document/syllabus-2026/), read for scope
  • Standard results of mechanics at school and JEE Main level; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.