Centre of Mass and Rigid Body Kinematics: JEE Main Notes
Reviewed Last updated 2026-11-20. Syllabus topic: Centre of mass and rigid body kinematics.
In short. The centre of mass is the mass-weighted average position, and it obeys M a_cm = F_ext whatever the internal forces. A rigid body in rotation about a fixed axis shares one angular velocity w and angular acceleration alpha, so a point at distance r moves with v = w r.
- x_cm = (m1 x1 + m2 x2 + ...)/(m1 + m2 + ...); for two particles it lies on the line joining them, nearer the heavier one.
- Uniform symmetric bodies have the centre of mass at the geometric centre; a hole is treated as a negative mass.
- Internal forces never change the centre-of-mass motion: if F_ext is zero along a direction, v_cm along it is constant.
- Constant angular acceleration: w = w0 + alpha t, theta = w0 t + alpha t²/2, w² = w0² + 2 alpha theta (angles in radian).
- A point at distance r: v = w r, tangential acceleration alpha r, centripetal acceleration w² r; total acceleration is their vector sum.
Syllabus line: Rotational Motion Centre of mass of a two-particle system, centre of mass of a rigid body. Basic concepts of rotational motion (NTA JEE (Main) 2026 syllabus, Physics, Unit 5 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Newton's laws and free-body diagrams: M a_cm = F_ext is Newton second law for a system. Read this first if free-body diagrams are not automatic.
- Uniform circular motion: v = w r and the centripetal acceleration w² r are used for every point of a rotating body. Read this first if radian measure or w is unclear.
- Vector algebra (lesson planned): Positions, velocities and cross products are vectors. Read this first if components or the cross product are weak.
Related topics
The concept step by step
Why a centre of mass
A thrown spanner tumbles in a complicated way, yet one special point of it follows the smooth parabola a single particle would follow. That point is the centre of mass. It is defined as the mass-weighted average position of the body, so the heavier parts pull it towards themselves. Everything that depends only on the total external force, such as the path of an exploding shell or the drift of a boat, can be solved by following this one point.
Centre of mass of particles and bodies
For particles, x_cm = (sum of m x)/(sum of m), with the same rule for y and z. For two particles the centre of mass divides the line joining them in the inverse ratio of the masses. For a continuous body replace the sum by an integral, but for a uniform body with a centre, axis or plane of symmetry the centre of mass lies on that centre, axis or plane. A composite or cut-out body is handled by treating each part as a particle of its own mass at its own centre of mass, with a removed part counted as negative mass.
Motion of the centre of mass
Add Newton second law for every particle of a system. The internal forces cancel in pairs, leaving M a_cm = F_ext, where M is the total mass. So internal explosions, tugs and walking cannot move the centre of mass. If the external force is zero in a direction, the centre-of-mass velocity in that direction is constant, and if the system starts at rest the centre of mass stays at rest, which is how a person walking on a floating boat moves the boat the other way.
Rigid body and angular variables
In a rigid body the distances between particles never change. For rotation about a fixed axis, every particle moves in a circle about the axis through the same angle in the same time, so the whole body shares one angular displacement theta, one angular velocity w = d theta/dt and one angular acceleration alpha = dw/dt. These are measured in radian, radian per second and radian per second squared. Convert revolutions and rpm with 1 rev = 2 pi rad and w = 2 pi N/60 for N rpm.
Equations of rotation with constant alpha
When alpha is constant the equations are the linear ones with new letters: w = w0 + alpha t, theta = w0 t + (1/2) alpha t² and w² = w0² + 2 alpha theta, and theta = (w0 + w) t/2. Use radian throughout, and give a retarding alpha a negative sign. The number of revolutions is theta/(2 pi). The same shortcut as in straight-line motion applies: when the speed falls uniformly to zero, the average speed is half the initial speed.
Speed and acceleration of a point
A point at distance r from the axis moves on a circle with speed v = w r, tangential acceleration a_t = alpha r along the velocity and centripetal acceleration a_c = w² r towards the axis. These two are perpendicular, so the magnitude of the total acceleration is the square root of (a_t² + a_c²). For rolling and general motion, any point has velocity v_cm plus the rotational velocity about the centre of mass, which is developed in the rolling topic.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
Masses of 1 kg at (0, 0), 2 kg at (3 m, 0) and 3 kg at (0, 4 m) form a system. Find the distance of its centre of mass from the origin, in metre.
| Step | Marks |
|---|---|
| x_cm = (1 x 0 + 2 x 3 + 3 x 0)/6 = 1.0 m. | 1 |
| y_cm = (1 x 0 + 2 x 0 + 3 x 4)/6 = 2.0 m. | 1 |
| Distance = sqrt(1.0² + 2.0²) = sqrt(5) = 2.24 m. | 1 |
| Total: 3 marks | 3 |
Answer: about 2.24 m
Fast method: Each coordinate is a weighted average: x = 6/6 and y = 12/6, then Pythagoras.
Sanity check: Units: metre. The centre of mass (1, 2) lies inside the triangle formed by the three particles and nearer the heaviest (3 kg) particle, as it should.
Example 2 (easy)
A wheel of radius 0.25 m turns at 1200 revolutions per minute. Find the speed of a point on its rim, in m/s.
| Step | Marks |
|---|---|
| w = 2 pi N/60 = 2 pi x 1200/60 = 40 pi = 125.7 rad/s. | 2 |
| v = w r = 125.7 x 0.25. | 1 |
| v = 31.4 m/s. | 1 |
| Total: 4 marks | 4 |
Answer: about 31.4 m/s
Fast method: v = 2 pi N r/60 = 2 pi x 20 x 0.25 = 10 pi = 31.4 m/s (1200 rpm is 20 rev per second).
Sanity check: Units: rad/s times m gives m/s. 31.4 m/s is about 113 km/h for a rim of 0.25 m, which is large but consistent with 20 rev/s on a small wheel.
Example 3 (medium)
A boat of mass 100 kg and length 4.0 m floats at rest on still water. A man of mass 60 kg walks from one end to the other. Ignoring water resistance, how far does the boat move, in metre?
| Step | Marks |
|---|---|
| No horizontal external force, so the centre of mass of man and boat stays fixed: 60 x (man displacement) + 100 x (boat displacement) = 0. | 2 |
| Man displacement relative to water = 4.0 - x if the boat moves x the other way; boat displacement = x in the opposite direction. | 1 |
| 60 (4.0 - x) = 100 x, so 240 = 160 x. | 1 |
| x = 1.5 m, opposite to the man walk. | 1 |
| Total: 5 marks | 5 |
Answer: 1.5 m, opposite to the walk
Fast method: Boat shift = m L/(M + m) = 60 x 4/160 = 1.5 m.
Sanity check: Units: metre. The boat moves less than the man does relative to the water (2.5 m), because it is the heavier, and the sum 2.5 + 1.5 = 4.0 m gives the length of the boat, as the walk is relative to the boat.
Example 4 (medium, multi-step)
A wheel starts from rest with constant angular acceleration 2.0 rad/s². After 5.0 s find the total acceleration, in m/s², of a point 0.40 m from the axis.
| Step | Marks |
|---|---|
| w = alpha t = 2.0 x 5.0 = 10 rad/s. | 1 |
| Tangential acceleration a_t = alpha r = 2.0 x 0.40 = 0.80 m/s². | 1 |
| Centripetal acceleration a_c = w² r = 100 x 0.40 = 40 m/s². | 1 |
| Total = sqrt(0.80² + 40²) = 40.01 m/s², essentially 40 m/s² towards the axis. | 1 |
| Total: 4 marks | 4 |
Answer: about 40.0 m/s²
Fast method: The centripetal term, 40 m/s², dominates; the tangential 0.80 m/s² changes the total only in the third figure.
Sanity check: Units: rad/s times rad/s times m gives m/s². The total is only slightly more than a_c because the angle from the radius is atan(alpha/w²) = atan(0.02), about 1.1 degrees.
Example 5 (hard, multi-step)
A uniform semicircular wire of radius 0.30 m is closed by a straight wire along its diameter, of the same material and cross-section. Find the distance of the centre of mass of the closed figure from the centre of the diameter, in metre.
| Step | Marks |
|---|---|
| Take lambda as mass per unit length. Semicircular arc: length pi R, centre of mass at 2R/pi from the centre. | 1 |
| Straight diameter: length 2R, centre of mass at the centre (distance 0). | 1 |
| y_cm = (pi R x 2R/pi + 2R x 0)/(pi R + 2R) = 2R²/((pi + 2) R) = 2R/(pi + 2). | 2 |
| y_cm = 0.60/5.1416 = 0.117 m. | 1 |
| Total: 5 marks | 5 |
Answer: about 0.117 m
Fast method: y = 2R/(pi + 2): the arc contributes mass pi R at height 2R/pi, i.e. a moment of 2R², divided by the total length (pi + 2) R.
Sanity check: Units: metre. The result 0.117 m is below the arc alone (2R/pi = 0.191 m), because the diameter adds mass at height zero, and it is positive, on the arc side.
Example 6 (hard)
A shell fired from level ground would land 100 m from the gun. At the top of its path it explodes into two fragments of 1.0 kg and 2.0 kg, both of which start with horizontal velocity and land together at the same level. The 1.0 kg fragment lands 60 m from the gun. Where does the 2.0 kg fragment land?
| Step | Marks |
|---|---|
| Both fragments leave the top with horizontal velocities, so they fall for the same time and land at the same instant. | 1 |
| External force (gravity) is the same as without the explosion, so the centre of mass of the fragments lands at 100 m. | 2 |
| (1.0 x 60 + 2.0 x x2)/3.0 = 100. | 1 |
| x2 = (300 - 60)/2.0 = 120 m from the gun. | 1 |
| Total: 5 marks | 5 |
Answer: 120 m from the gun
Fast method: Moments about the landing point: 1.0 x (100 - 60) = 2.0 x (x2 - 100), so x2 - 100 = 20 m.
Sanity check: Units: metre. The lighter fragment is 40 m short of 100 m, so the heavier is 20 m beyond it: distances from the centre of mass are in the inverse ratio of the masses.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Centre of mass of particles | x_cm = (sum m x)/(sum m) | point masses or a rigid body; same origin and axis for all terms | m | Example 1 |
| Two particles | distance from m1 = m2 d/(m1 + m2) | two point masses; d is their separation, answer measured from m1 | m | none |
| Hole (negative mass) | x_rem = -(m_hole x_hole)/(M - m_hole) | uniform body with a hole; positions from the same origin as the full body | m | none |
| Centre-of-mass motion | M a_cm = F_ext | any system of particles; F_ext is the net external force only | N | Example 3 |
| Semicircular ring, disc, solid hemisphere | 2R/pi, 4R/(3 pi), 3R/8 from the centre | uniform bodies; distances along the symmetry axis from the centre | m | Example 5 |
| Constant angular acceleration | w = w0 + alpha t; theta = w0 t + alpha t²/2; w² = w0² + 2 alpha theta | constant angular acceleration about a fixed axis; angles in radians | rad/s (rad) | Example 4 |
| rpm to angular speed | w = 2 pi N/60 | N in revolutions per minute; w in rad/s | rad/s | Example 2 |
| Point at distance r | v = w r; a_t = alpha r; a_c = w² r | point on a rigid body rotating about a fixed axis; w in rad/s | m/s (m/s²) | Example 2 |
Common mistakes and speed
- Measuring the centre-of-mass distance from the wrong particle. Why it tempts: The formula gives a distance from the origin; if the origin is at the lighter particle, an option measured from the heavier one looks equally plausible.
- Adding the hole as positive mass. Why it tempts: Adding parts is the habit from composite bodies, so a hole is treated as one more part; the sign error moves the centre of mass towards the hole instead of away from it.
- Taking the man displacement relative to the boat as his displacement relative to the water. Why it tempts: The length of the boat is the number in the stem, so it is substituted straight into the equation for the centre of mass.
- Using degrees or revolutions in w² = w0² + 2 alpha theta. Why it tempts: rpm and revolutions are the numbers given, and an option equal to the number of radians is often offered.
- Ignoring the centripetal acceleration of a point on a turning wheel. Why it tempts: alpha is the only acceleration mentioned, so only alpha r seems to count; w² r is usually far larger after a few seconds.
Time per question and fast method
Target: about 100 seconds per question.
For two particles use the inverse-ratio rule: the centre of mass is nearer the heavier one. For holes, use the area ratio and the negative-mass sum. For rotation questions convert rpm to rev per second first and use average speed for uniform retardation, so that radians are needed only at the end.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 5 correct. Pick an option for each question.
Practice
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Centre of mass: definition, two particles and standard positions
x_cm = (sum m_i x_i)/M, and likewise for y and z; as a vector r_cm = (sum m_i r_i)/M. For two particles at separation d the centre of mass is at m2 d/(m1 + m2) from m1, so the distances from the particles are in the ratio m2 : m1. Uniform bodies: rod, disc, ring, sphere and rectangle at the geometric centre. Standard positions from the centre: uniform semicircular ring 2R/pi, uniform semicircular disc 4R/(3 pi), solid hemisphere 3R/8, all along the axis of symmetry. The centre of mass need not lie inside the body (a ring, an L-shaped frame). Units: metre; the point itself depends only on the mass distribution, but its coordinates depend on the origin chosen.
Composite bodies, holes and the negative-mass method
For a composite body, take each part as a particle of its own mass at its own centre of mass. For a body with a hole, the whole uniform body equals the remaining part plus the hole, so M_rem x_rem + m_hole x_hole = M x_whole, which gives x_rem = -(m_hole x_hole)/(M - m_hole) when the whole body has centre of mass at the origin. For uniform plates mass is proportional to area, for uniform wires to length, for solids to volume, and it is a common error to use the wrong one (a semicircular wire closed by its diameter uses length, not area). For example, a disc of radius R with a hole of radius R/2 centred at R/2 has its centre of mass at R/6 from the centre, away from the hole.
Motion of the centre of mass: what it settles and what it does not
M a_cm = F_ext and, for constant mass, P = M v_cm with dP/dt = F_ext. Consequences: a shell exploding in flight leaves the centre of mass of the fragments on the original parabola until the first fragment lands; two bodies on a frictionless surface that interact only with each other keep a constant v_cm; a person walking on a boat on still water moves the boat so that m x_man + M x_boat has no net change. The relative displacement of man and boat is the length walked, not the man displacement relative to water. The centre of mass does not tell the rotation of the body about it: that needs torque. Do not apply M a_cm = F_ext to a single part of a system without the internal forces.
Angular kinematics, units and conversions
Angular displacement theta in radian (one revolution is 2 pi rad), angular velocity w in rad/s (dimension T⁻1), angular acceleration alpha in rad/s² (T⁻2). The radian is dimensionless, so v = w r gives m/s from rad/s times m. Conversions: w = 2 pi f = 2 pi N/60 for N revolutions per minute; one rpm is pi/30 rad/s. Constant-alpha equations hold only for constant alpha; for variable alpha integrate: w = integral of alpha dt, theta = integral of w dt, and use the area under an alpha-t or w-t graph. The sign convention is chosen by the direction of rotation: anticlockwise positive is common, and retardation has alpha opposite to w. For uniform rotation (alpha = 0) starting from theta = 0, theta = w t.
Rigid body: speeds and accelerations of points; what examiners test
All points share w and alpha but differ in v = w r, a_t = alpha r and a_c = w² r, so the total acceleration of a point at distance r makes an angle with the radius whose tangent is alpha/w², the same for every point. At the instant a wheel starts from rest the acceleration is purely tangential. Typical items: number of revolutions made before stopping, time to stop, the point of a wheel with a given acceleration, the centre of mass of a cut-out plate or composite wire, the shift of a boat, and the landing point of a fragment. Check each by units and by a limiting case, for example a hole of vanishing size should leave the centre of mass at the centre.
Memory hook
Suppose you stand at one end of a small boat floating in still water, with a friend of different weight standing at the other end.
- The centre of mass of you, your friend and the boat is one point, closer to the heavier of the two of you.
- Now you walk towards the other end. The water gives no sideways push, so the centre of mass of man plus boat cannot move, and the boat drifts the opposite way as you walk.
- If the boat spins slowly as well, every seat on it turns through the same angle in the same time, but the seat farther from the middle moves faster.
The centre of mass is the mass-weighted balance point and does not move under internal pushes; a rigid body turns as one, with the same w for every point and v = w r growing with distance.
Internal pushes cannot move the centre of mass; every point of a spinning rigid body shares w.
Revision card
Try to answer each without looking above.
- Write x_cm for particles and the inverse-ratio rule for two particles.
- Treat a hole as a negative mass and write the resulting x_rem formula.
- State what M a_cm = F_ext means for an exploding shell and for a man walking on a boat.
- Write the three constant-alpha equations and the rpm to rad/s conversion.
- Give v, tangential acceleration and centripetal acceleration of a point at distance r.
- Give the centre of mass of a semicircular ring, a semicircular disc and a solid hemisphere.
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 3; fixed: 3
- Report: content/reviews/learn3-rot-2026-11-20.md
Textbook references
- NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 6: Systems of Particles and Rotational Motion, 6.2 CENTRE OF MASS (read 2026-11-22)
- NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 6: Systems of Particles and Rotational Motion, 6.3 MOTION OF CENTRE OF MASS (read 2026-11-22)
- NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 6: Systems of Particles and Rotational Motion, 6.10 KINEMATICS OF ROTATIONAL MOTION ABOUT A FIXED AXIS (read 2026-11-22)
- NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 6: Systems of Particles and Rotational Motion, Example 6.11 Example 6.11 (read 2026-11-22)
- NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 6: Systems of Particles and Rotational Motion, 6.6 ANGULAR VELOCITY AND ITS RELATION WITH LINEAR VELOCITY (read 2026-11-22)
Sources used
- NTA JEE (Main) 2026 syllabus, Physics, Unit 5 (https://jeemain.nta.nic.in/document/syllabus-2026/), read for scope
- Standard results of mechanics at school and JEE Main level; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.