EngineeringRise

Current, Drift Velocity and Ohm Law: JEE Main Notes

Reviewed Last updated 2026-11-20. Syllabus topic: Current, drift velocity and Ohm law.

In short. Current is charge crossing a section per second. In a metal, free electrons drift slowly against the field, with I = n A e v_d and mobility mu = v_d/E. For an ohmic conductor V = I R, so the I-V graph is a straight line through the origin.

  • Current I = dq/dt in ampere; it is a scalar, and conventional current points opposite to the electron drift.
  • I = n A e v_d, so at a given current the drift speed is smaller where the cross-section is larger.
  • Mobility mu = v_d/E has unit m²/(V s); conductivity of a metal is sigma = n e mu.
  • Ohm law V = I R holds at constant temperature; resistance of a non-ohmic device is V/I (static) and dV/dI (dynamic), and they differ.

Syllabus line: Current Electricity Electric current: drift velocity, mobility and their relation with electric current, Ohm's law, electrical resistance, I-V characteristics of Ohmic and non-ohmic conductors, electrical energy and power, electrical resistivity and conductivity, series and parallel combinations of resistors, temperature dependence of resistance. Internal resistance, potential difference and emf of a cell, a combination of cells in series and parallel. Kirchhoff's laws and their applications, Wheatstone bridge, Metre Bridge. (NTA JEE (Main) 2026 syllabus, Physics, Unit 12 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

  • Electrostatics: electric field and potential difference (lesson planned): Current needs a field E = V/L inside the wire. Read this first if potential difference and field are not clear.
  • Units and dimensions (lesson planned): Mobility and current density have compound units. Read this first if unit conversion from mm² to m² slips.
  • Newton's laws and free-body diagrams: The drift model uses force and average acceleration of an electron between collisions.

Related topics

The concept step by step

  1. What electric current is

    Electric current is the net charge that crosses a chosen cross-section of a conductor per unit time: I = dq/dt. Its unit is the ampere, 1 A = 1 C/s. Current is a scalar even though we draw an arrow on it. By convention the arrow shows the direction positive charge would move, which is opposite to the motion of electrons in a metal. For a steady current, I = q/t and the charge crossing in time t is q = I t. If the current changes with time, charge is the area under the I-t graph, q = integral of I dt.

  2. Free electrons and drift

    A metal has a very large number of free electrons per cubic metre, n. Without a field they move randomly at high speed and there is no net flow. When a potential difference is applied, a field E = V/L appears along the wire, and each electron gains a small velocity opposite to E between collisions with the lattice. The average velocity along the wire is the drift velocity v_d. It is tiny compared with the random speed, which is why a lamp lights at once although individual electrons creep along slowly.

  3. The relation I = n A e v_d

    Take a wire of cross-section A. In a time t, electrons within a length v_d t cross a section. That volume is A v_d t and holds n A v_d t electrons, each of charge e. So q = n A e v_d t and I = n A e v_d. Dividing by A gives the current density J = I/A = n e v_d. Use SI units: area in m², n per m³, e = 1.6 x 10⁻19 C. A common slip is leaving A in mm², which makes v_d wrong by a factor of one million.

  4. Relaxation time and mobility

    An electron of charge e and mass m in field E has acceleration e E/m. If the average time between collisions is tau (the relaxation time), the drift speed is v_d = (e tau/m) E. The drift speed per unit field is called mobility, mu = v_d/E = e tau/m, with unit m²/(V s). A larger mobility means a larger drift speed for the same field. Substituting into J = n e v_d gives J = (n e² tau/m) E = sigma E, so conductivity is sigma = n e mu = n e² tau/m.

  5. Ohm law and resistance

    For a uniform wire of length L and area A, E = V/L and J = I/A. Using J = sigma E gives I/A = sigma V/L, so V = I (L/(sigma A)). The ratio V/I is the resistance R, in ohm. Ohm law says that, at constant temperature, V is proportional to I, that is R is constant. It is a property of certain materials, not a law that every device obeys. A metal wire at fixed temperature obeys it closely; a heated filament does not, because its temperature changes with current.

  6. I-V characteristics: ohmic and non-ohmic

    An ohmic conductor has a straight I-V line through the origin; its slope dI/dV = 1/R is constant. A non-ohmic device has a curved I-V graph, or is not symmetric about the origin. A filament lamp curves toward the V-axis because its resistance rises as it heats. A p-n junction diode conducts easily in one direction and hardly at all in the other. For such devices give two numbers at a point: static resistance V/I and dynamic resistance dV/dI, the reciprocal of the local slope. They are equal only for an ohmic conductor.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

A steady current of 0.50 A flows through a lamp for 10 minutes. Find the charge that passes through the lamp.

Marks-style solution of example 1
StepMarks
Convert the time: 10 minutes = 600 s.1
q = I t = 0.50 x 600.1
q = 300 C.1
Total: 3 marks3

Answer: 300 C

Fast method: q = I t, with t converted to seconds: 0.5 x 600 = 300 C.

Sanity check: Units: A x s = C. A current of half an ampere for 600 s moves a few hundred coulomb, which is reasonable. A lamp left for twice as long passes twice the charge.

Example 2 (easy)

A metallic resistor draws 0.25 A when 10 V is applied. Assuming it is ohmic, find the current when 16 V is applied at the same temperature.

Marks-style solution of example 2
StepMarks
R = V/I = 10/0.25 = 40 ohm.1
For an ohmic conductor R is constant, so I = V/R = 16/40.1
I = 0.40 A.1
Total: 3 marks3

Answer: 0.40 A

Fast method: Current is proportional to V: 0.25 x 16/10 = 0.40 A.

Sanity check: Units: V/ohm = A. The voltage rises by a factor 1.6, so the current rises by 1.6: 0.25 x 1.6 = 0.40 A, consistent. If the device were not ohmic, this scaling would fail.

Example 3 (medium)

A copper wire of cross-section 1.0 mm² carries 2.0 A. Take n = 8.5 x 10²8 per m³ and e = 1.6 x 10⁻19 C. Find the drift speed in mm/s.

Marks-style solution of example 3
StepMarks
I = n A e v_d, so v_d = I/(n A e).1
A = 1.0 x 10⁻6 m², so n A e = 8.5 x 10²8 x 10⁻6 x 1.6 x 10⁻19 = 1.36 x 10⁴ C/m.2
v_d = 2.0/(1.36 x 10⁴) = 1.47 x 10⁻4 m/s = 0.147 mm/s.1
Total: 4 marks4

Answer: about 0.147 mm/s

Fast method: Current density 2 x 10⁶ A/m² divided by n e = 1.36 x 10¹0 C/m³ gives 1.47 x 10⁻4 m/s.

Sanity check: Units: A/(C/m) = m/s. Drift speed well below a millimetre per second is the usual order for metals. Doubling the current would double it; doubling the area would halve it.

Example 4 (medium)

A metal has n = 8.0 x 10²8 per m³ and electron mobility 4.0 x 10⁻3 m²/(V s). Find its resistivity in units of 10⁻8 ohm m. Take e = 1.6 x 10⁻19 C.

Marks-style solution of example 4
StepMarks
Conductivity sigma = n e mu.1
sigma = 8.0 x 10²8 x 1.6 x 10⁻19 x 4.0 x 10⁻3 = 5.12 x 10⁷ S/m.2
rho = 1/sigma = 1.95 x 10⁻8 ohm m, so the answer is 1.95.1
Total: 4 marks4

Answer: 1.95 (x 10⁻8 ohm m)

Fast method: n e = 1.28 x 10¹0; times 4 x 10⁻3 = 5.12 x 10⁷; take the reciprocal.

Sanity check: Units: m⁻3 C m²/(V s) = A/(V m) = S/m. A resistivity of order 10⁻8 ohm m is the usual order for a good metallic conductor.

Example 5 (medium)

A device has the characteristic I = 0.02 V² (I in A, V in V). At V = 4 V find the static resistance and the dynamic resistance. Give the dynamic resistance in ohm.

Marks-style solution of example 5
StepMarks
I at 4 V = 0.02 x 16 = 0.32 A.1
Static resistance = V/I = 4/0.32 = 12.5 ohm.1
dI/dV = 2 x 0.02 x 4 = 0.16 A/V, so dynamic resistance = 1/0.16 = 6.25 ohm.2
Total: 4 marks4

Answer: static 12.5 ohm, dynamic 6.25 ohm

Fast method: For I = k V²: R_static = 1/(k V), R_dynamic = 1/(2 k V), exactly half.

Sanity check: Units: V/A = ohm. The dynamic value is half the static one for any square-law device; if your two numbers are not in the ratio 1 : 2 something is wrong. At V = 0 this model gives an infinite static resistance, a limiting case to ignore.

Typical trap: Taking resistance as the slope of the curve, or as V/I at the wrong point. For a non-ohmic device the static resistance V/I and the dynamic resistance dV/dI are different numbers.

Example 6 (hard, multi-step)

Two wires of the same copper are joined end to end in series. The thin wire has radius 0.50 mm and the thick wire radius 1.0 mm. A steady current of 2.0 A flows. Resistivity of the copper is 1.7 x 10⁻8 ohm m. Find the electric field inside the thin wire in V/m, and the ratio of drift speeds (thin to thick).

Marks-style solution of example 6
StepMarks
Current is the same in both wires. Current density in the thin wire J = I/A = 2.0/(pi x (0.5 x 10⁻3)²) = 2.55 x 10⁶ A/m².2
E = rho J = 1.7 x 10⁻8 x 2.55 x 10⁶ = 0.0433 V/m.2
Drift speed is J/(n e); J is inversely proportional to the area, and the area ratio is 1 : 4, so the speed ratio thin : thick = 4.1
Field in the thin wire is 0.0433 V/m (about 0.043 V/m); drift speed ratio 4 : 1.1
Total: 6 marks6

Answer: E = 0.0433 V/m in the thin wire; ratio of drift speeds 4

Fast method: E = rho I/A. A = 7.85 x 10⁻7 m², so E = 1.7 x 10⁻8 x 2/7.85 x 10⁻7 = 0.0433 V/m. Speed ratio = area ratio = (1.0/0.5)² = 4.

Sanity check: Units: ohm m x A/m² = V/m. The thick wire has a quarter of the field, 0.0108 V/m, and a quarter of the drift speed; the voltage drop per metre is larger in the thin wire, as expected.

Example 7 (medium)

In a copper wire the drift speed of electrons is 0.15 mm/s. How long, in hours, does an electron take to drift along a 3.0 m length of the wire?

Marks-style solution of example 7
StepMarks
Convert the speed: 0.15 mm/s = 1.5 x 10⁻4 m/s.1
t = L/v_d = 3.0/(1.5 x 10⁻4) = 2.0 x 10⁴ s.1
In hours: 20000/3600 = 5.56 h.1
Total: 3 marks3

Answer: about 5.6 hours

Fast method: Distance divided by speed: 3/0.00015 = 20000 s.

Sanity check: Units: m/(m/s) = s. Hours of travel for three metres shows why the lamp lighting at once is due to the field, not to electrons arriving from the battery.

Formulas and units

Formula and unit box for Current, drift velocity and Ohm law
ResultFormulaValid whenUnits or noteWorked example
CurrentI = dq/dt; q = I t (steady)q = I t only for a steady currentA (C)Example 1
Current and drift speedI = n A e v_duniform conductor with one type of carrier; n in per m³A (n in m⁻3, A in m², v_d in m/s)Example 3
Current densityJ = I/A = n e v_dcurrent uniform over the cross-section and along the area normalA/m²Example 6
Mobilitymu = v_d/E = e tau/mdrift speed under a uniform field E; tau is mean free timem²/(V s)none
Conductivitysigma = n e mu = n e² tau/m; rho = 1/sigmametallic conductor with free electrons, constant tauS/m (ohm m)Example 4
Microscopic Ohm lawJ = sigma Eohmic isotropic material at constant temperatureA/m²Example 6
Ohm lawV = I R (constant temperature)ohmic conductor at constant temperatureV (A, ohm)Example 2
Static and dynamic resistanceR_static = V/I; R_dyn = dV/dIany conductor; the two are equal only for ohmic onesohmExample 5
Electrons crossing in time tN = I t/e (e = 1.6 x 10⁻19 C)steady current of elementary charge carriersdimensionlessnone

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Leaving the area in mm² in I = n A e v_d. Why it tempts: The area is given in mm² and the mental picture is of small numbers; the result then looks plausible but is wrong by 10⁶, and one option often sits at that factor.
  • Using the potential difference instead of the field in v_d = mu E. Why it tempts: V and E look alike and mobility has V in its unit, so v_d = mu V seems dimensionally natural; but E = V/L must be used.
  • Saying the drift speed depends on the cross-section for a given V across a uniform wire. Why it tempts: I = n A e v_d contains A, but I also changes with A; at fixed V the area cancels and v_d = mu V/L.
  • Treating the slope of any I-V curve as the resistance. Why it tempts: For ohmic conductors the slope is 1/R, so students carry the rule to curves; for a curve the static resistance is V/I at the point.
  • Believing electrons travel from the cell to the lamp at once. Why it tempts: The lamp lights instantly, which suggests fast carriers; actually the electric field is set up at once and carriers everywhere drift slowly.

Time per question and fast method

Target: about 75 seconds per question.

For drift speed use v = (I/A)/(n e) with A in m² after one conversion line. For ratios do not compute numbers: write v proportional to I/A (same wire) or to 1/L (same V). For a non-ohmic device write R_static = V/I and R_dynamic = 1/slope separately, and check which one the question asks for.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. A steady current of 2.5 A flows for 2 s. How much charge crosses a section, in coulomb?
Show the answer

Answer: A: 5 C. q = I t = 2.5 x 2 = 5 C.

Question 2. The same current flows through a wire whose cross-section is doubled. The drift speed becomes what fraction of its old value?
Show the answer

Answer: C: 0.5. v_d = I/(n A e), so doubling A halves v_d.

Question 3. A resistor has 12 ohm at constant temperature. What current flows at 9 V, in ampere?
Show the answer

Answer: A: 0.75 A. I = V/R = 9/12 = 0.75 A.

Question 4. How many electrons cross a section each second when the current is 1.6 A, in units of 10¹9? (e = 1.6 x 10⁻19 C)
Show the answer

Answer: C: 1. The rate is I/e = 1.6/(1.6 x 10⁻19) = 10¹9 electrons per second, which is 1 in units of 10¹9.

Question 5. Which statement about an ohmic conductor is correct?
Show the answer

Answer: A: Its I-V graph is a straight line through the origin at constant temperature. For an ohmic conductor R is constant, so I is proportional to V and static and dynamic resistance are equal.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Current, charge and the sign convention

I = dq/dt, so the charge through a section is the area under the I-t graph. For I = k t² from 0 to T, q = k T³/3. The ampere is the base unit; the coulomb is one ampere second. In a metal only electrons move; in an electrolyte or gas both positive and negative carriers contribute and the currents add. The conventional direction is that of positive carriers. Current is not a vector: it does not obey the vector rules at a junction, it only adds algebraically. Current density J = I/A is the vector, in A/m², along the field in an ohmic material. Number of electrons crossing in time t is N = I t/e, so 1 A corresponds to about 6.25 x 10¹8 electrons per second.

Drift velocity: derivation, size and dependence

From I = n A e v_d the drift speed is v_d = I/(n A e) = J/(n e). With the same current in a wire of varying cross-section, v_d is inversely proportional to the local area, and so is the field if the material is the same (E = rho J). With the same potential difference across a uniform wire, v_d = mu V/L depends only on the length and material, not on the area: a stretched wire of double length has half the drift speed for the same V. Doubling the current in the same wire doubles v_d. The drift speed is of the order of fractions of a millimetre per second for ordinary currents in a copper wire, while the signal (the field) is established almost instantly along the circuit. Time for an electron to travel a length L is L/v_d, which is very long, so charge does not "travel from battery to bulb".

Mobility, conductivity and the microscopic Ohm law

Mobility mu = v_d/E = e tau/m. Units: m² V⁻1 s⁻1 (some books use cm²/(V s); convert by 10⁻4). Conductivity sigma = n e mu = n e² tau/m and resistivity rho = 1/sigma = m/(n e² tau). The vector form J = sigma E is the microscopic form of Ohm law; V = I R is the macroscopic form obtained by integrating over the length. Raising the temperature of a metal increases collisions, so tau falls, mobility falls and resistivity rises. In a semiconductor, heating raises n greatly and the effect on n dominates over mobility, so resistivity falls. These two sentences explain the sign of the temperature coefficient met in the next topic.

Ohm law, its limits and I-V graphs

Ohm law states V proportional to I for a conductor at constant physical conditions, mainly temperature. Resistance is R = V/I; for an ohmic conductor R is the reciprocal of the slope of the I-V graph and is a constant. For a non-ohmic device R = V/I changes with V. The dynamic (differential) resistance is dV/dI at the working point. Examples: for I = k V², static R = 1/(k V) and dynamic R = 1/(2 k V), half of it. A filament lamp: static resistance rises with V. A diode: negligible current in reverse bias until breakdown. Reading a graph: do not compute R as the slope unless the line is straight through the origin; use V/I at the point, and for a graph drawn as V against I the slope is the resistance.

What examiners test and edge cases

Typical items: numerical drift speed from I, n, A (unit conversion of area is the trap); ratio of drift speeds after a wire is stretched or two wires of different radii are joined in series; mobility and v_d = mu E with E = V/L; charge from a time-varying current by integration, and number of electrons; conductivity from n and mu; I-V graph reading and static versus dynamic resistance; statements such as "drift speed is of the order of the random speed" (false) or "Ohm law is universal" (false). Edge cases: for a joined series of two wires the current is the same, J and E differ; a wire cut to half its length has the same material properties but half the resistance. Always keep the same temperature when invoking Ohm law. Keep units: A, C, m², V/m, m²/(V s).

Memory hook

Suppose a long queue of people walks slowly down a crowded railway platform towards the exit, and the stationmaster counts how many pass a pillar every minute.

  1. Each person moves only a step at a time, yet the number crossing the pillar per minute can be large because there are many people close together.
  2. If the platform narrows to half the width and the same number must pass per minute, people must walk faster through the narrow part.
  3. If a stronger push comes from behind (a bigger field), each person walks a little faster, and the count at the pillar rises in proportion.

Many carriers each moving slowly make a large current: I = n A e v_d, and for the same current the carriers move faster where the wire is thinner.

Current is the head count at the pillar: carriers per metre cubed, times area, times charge, times slow drift speed.

Revision card

Try to answer each without looking above.

  1. Write I in terms of n, A, e and v_d, and state which unit each needs.
  2. Define mobility, give its SI unit and relate it to relaxation time.
  3. For the same V across a uniform wire, what does the drift speed depend on?
  4. State the condition under which Ohm law holds and what the I-V graph of an ohmic conductor looks like.
  5. Distinguish static and dynamic resistance for I = k V².
  6. Why does the lamp light at once although the drift speed is small?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (see content/reviews/scope-audit-2026-11-20.md)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 1; fixed: 1
  • Report: content/reviews/learn2-cur-2026-11-20.md

Textbook references

  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 3: Current Electricity, 3.4 OHM'S LAW (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 3: Current Electricity, Summary Summary (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 3: Current Electricity, Points to ponder POINTS TO PONDER (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 3: Current Electricity, Example 3.2 Example 3.2 (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 3: Current Electricity, 3.8 TEMPERATURE DEPENDENCE OF RESISTIVITY (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 3: Current Electricity, 3.3 ELECTRIC CURRENTS IN CONDUCTORS (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 3: Current Electricity, 3.5 DRIFT OF ELECTRONS AND THE ORIGIN OF RESISTIVITY (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 3: Current Electricity, 3.6 LIMITATIONS OF OHM'S LAW (read 2026-11-22)
  • NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 3: Current Electricity, Example 3.1 Example 3.1 (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 12 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
  • NTA JEE (Main) 2026 syllabus, Physics, Unit 12 (https://jeemain.nta.nic.in/document/syllabus-2026/), read for scope
  • Standard results of school-level current electricity; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.