Magnetic Dipole, Bar Magnet, Materials: JEE Main Notes
Reviewed Last updated 2026-11-20. Syllabus topic: Magnetic dipole, bar magnet and magnetic materials.
In short. A current loop is a magnetic dipole of moment M = N I A, and a bar magnet behaves like an equivalent solenoid. For a short magnet B = (mu0/4 pi) 2M/d³ on the axis and (mu0/4 pi) M/d³ on the equator. In a field the torque is M B sin(theta) and the energy is -M B cos(theta). Dia, para and ferromagnetic materials differ in the sign and size of susceptibility and in how they depend on temperature.
- Dipole moment of a current loop M = N I A, along the normal by the right-hand rule; the bar magnet is equivalent to a solenoid of the same moment, M = pole strength x length.
- Short magnet at distance d from the centre: axial B = (mu0/4 pi) 2M/d³, equatorial B = (mu0/4 pi) M/d³, so axial is twice equatorial at the same d.
- Torque tau = M B sin(theta); energy U = -M B cos(theta); small oscillations have T = 2 pi sqrt(I/(M B)).
- Magnetic field lines form closed loops and never cross; outside the magnet they go from north to south, inside from south to north.
- Diamagnetic: small negative susceptibility, independent of temperature. Paramagnetic: small positive, chi proportional to 1/T (Curie). Ferromagnetic: large positive, becomes paramagnetic above the Curie temperature.
Syllabus line: Magnetic Effects of Current and Magnetism Biot - Savart law and its application to the current carrying circular loop, Ampere's law and its applications to infinitely long current carrying straight wire and solenoid. Force on a moving charge in uniform magnetic and electric fields, force on a current-carrying conductor in a uniform magnetic field, the force between two parallel currents carrying conductors-definition of ampere, torque experienced by a current loop in a uniform magnetic field: Moving coil galvanometer, its sensitivity and conversion to ammeter and voltmeter. Current loop as a magnetic dipole and its magnetic dipole moment, bar magnet as an equivalent solenoid, magnetic field lines, magnetic field due to a magnetic dipole (bar magnet) along its axis and perpendicular to its axis, torque on a magnetic dipole in a uniform magnetic field, para-, dia- and ferromagnetic substances with examples, the effect of temperature on magnetic properties. (NTA JEE (Main) 2026 syllabus, Physics, Unit 13 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Biot-Savart law and Ampere law: The dipole field is the far field of a loop and the equivalent-solenoid idea uses B = mu0 n I. Read it first if the field of a loop is unclear.
- Force on charges and currents, galvanometer: The torque on a magnet is the torque on a current loop. Read it first if tau = N I A B sin(theta) is unclear.
Related topics
- Biot-Savart law and Ampere law
- Force on charges and currents, galvanometer
- Magnetic Effects of Current and Magnetism (lesson planned)
- Electromagnetic Induction and Alternating Currents (lesson planned)
The concept step by step
A current loop is a magnetic dipole
A loop of N turns, each of area A, carrying a current I, has a magnetic dipole moment M = N I A. It is a vector along the normal to the loop, in the direction given by the right-hand rule on the current. Far from the loop its field has the same pattern as the field of a small bar magnet with the same moment. The unit of M is A m², or J/T. An electron orbiting a nucleus is a tiny current loop, which is the origin of atomic magnetism.
Bar magnet as an equivalent solenoid
A bar magnet has the same external field as a short solenoid carrying a current. Its magnetic moment is M = m (2l), where m is the pole strength and 2l the distance between poles, and for the equivalent solenoid M = n I A L. Cutting a magnet into two halves across its length halves the length and keeps the pole strength, so each piece has half the moment; the pieces always have two poles. Isolated magnetic poles do not exist; field lines are closed loops.
Field of a short bar magnet
For a magnet small compared with the distance d from its centre, the field on the axis is B = (mu0/4 pi) 2M/d³ along M, and on the equatorial line B = (mu0/4 pi) M/d³ opposite to M. Both fall as 1/d³, so doubling the distance divides the field by 8. At equal distances the axial field is twice the equatorial one. A neutral point is a place where the magnet field cancels the earth field, found by setting the dipole field equal to the horizontal component of the earth field.
Dipole in a uniform field: torque, energy and oscillation
A dipole in a uniform field has no net force but a torque tau = M x B, of size M B sin(theta). Its potential energy is U = -M B cos(theta), the lowest (stable) when M is along B and the highest when M is opposite. The work to turn it from theta1 to theta2 is M B (cos theta1 - cos theta2). For small angles the torque is about M B theta, so it oscillates with period T = 2 pi sqrt(I/(M B)), where I is its moment of inertia about the axis of rotation.
Dia-, para- and ferromagnetic materials
The magnetisation (dipole moment per unit volume, written M_vol here so it is not confused with the dipole moment M in A m²) is M_vol = chi H and the permeability ratio is mu_r = 1 + chi. Diamagnetic substances (bismuth, copper, water) have a small negative chi, are weakly repelled, and chi hardly changes with temperature. Paramagnetic substances (aluminium, sodium, oxygen) have a small positive chi, are weakly attracted, and obey Curie law chi = C/T. Ferromagnetic substances (iron, nickel, cobalt) have a large positive chi and keep magnetisation in domains; above the Curie temperature they become paramagnetic.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
A coil of 100 turns and radius 3.0 cm carries 0.50 A. Find its magnetic dipole moment, in A m².
| Step | Marks |
|---|---|
| M = N I A with A = pi r². | 1 |
| A = pi x (0.030)² = 2.83 x 10⁻3 m². | 1 |
| M = 100 x 0.50 x 2.83 x 10⁻3 = 0.141 A m². | 1 |
| Total: 3 marks | 3 |
Answer: about 0.141 A m²
Fast method: M = 50 x pi x 9.0 x 10⁻4 = 0.141 A m².
Sanity check: Units: A x m². A coil of this size and current has a moment of order 0.1 A m², comparable with a small bar magnet.
Example 2 (easy)
A magnet of moment 0.40 A m² is in a field of 0.30 T at 30 degrees to it. Find the torque, in N m.
| Step | Marks |
|---|---|
| tau = M B sin(theta). | 1 |
| tau = 0.40 x 0.30 x sin 30 degrees. | 1 |
| tau = 0.060 N m. | 1 |
| Total: 3 marks | 3 |
Answer: 0.060 N m
Fast method: M B = 0.12 and sin 30 degrees = 0.5, so tau = 0.060 N m.
Sanity check: Units: A m² x T = N m. The torque cannot exceed M B = 0.12 N m and is half that here.
Example 3 (medium)
A short bar magnet has a moment of 1.2 A m². Find the field at 25 cm from its centre on the axis and on the equatorial line, in microtesla. Take mu0/4 pi = 10⁻7 T m/A. Give the axial field.
| Step | Marks |
|---|---|
| Axial: B = (mu0/4 pi) 2M/d³ = 10⁻7 x 2 x 1.2/(0.25)³. | 1 |
| (0.25)³ = 0.015625 m³, so B = 2.4 x 10⁻7/0.015625. | 1 |
| B_axial = 1.536 x 10⁻5 T = 15.4 microtesla. | 1 |
| Equatorial is half: 7.68 microtesla. | 1 |
| Total: 4 marks | 4 |
Answer: axial about 15.4 microtesla, equatorial about 7.68 microtesla
Fast method: B_axial = 2 x 10⁻7 x 1.2/0.0156 = 1.54 x 10⁻5 T.
Sanity check: Units: T m/A x A m²/m³ = T. The axial field is exactly twice the equatorial at the same distance, and the 1/d³ fall means doubling the distance would reduce the axial field to 1.92 microtesla.
Example 4 (medium)
A bar magnet of moment 0.80 A m² is cut into two equal pieces by a plane perpendicular to its length. Find the moment of each piece, in A m².
| Step | Marks |
|---|---|
| Cutting across the length keeps the pole strength m unchanged (each end still has a pole of the same strength). | 1 |
| The distance between the poles halves, so M = m x length halves. | 1 |
| Each piece has M = 0.80/2 = 0.40 A m². | 1 |
| Total: 3 marks | 3 |
Answer: 0.40 A m² each
Fast method: M = m x length: the length halves, the pole strength stays, so M halves to 0.40 A m².
Sanity check: Units: A m². Limiting case: a piece cut to zero length has zero moment, consistent with M proportional to length at fixed pole strength.
Example 5 (hard, multi-step)
A magnet of moment 0.50 A m² and moment of inertia 2.0 x 10⁻6 kg m² about its axis of rotation oscillates in a horizontal field of 40 microtesla. Find the period of small oscillations, in s, and the period if the field is made four times as strong. Give the first period.
| Step | Marks |
|---|---|
| For small angles tau = -M B theta, so I d2theta/dt2 = -M B theta. | 2 |
| T = 2 pi sqrt(I/(M B)); M B = 0.50 x 4.0 x 10⁻5 = 2.0 x 10⁻5 J. | 2 |
| I/(M B) = 2.0 x 10⁻6/2.0 x 10⁻5 = 0.10 s², so T = 2 pi x 0.316 = 1.99 s. | 1 |
| With 4B the period halves to 0.99 s. | 1 |
| Total: 6 marks | 6 |
Answer: about 1.99 s; about 0.99 s with a fourfold field
Fast method: T = 2 pi sqrt(I/(M B)) = 2 pi sqrt(0.1) = 1.987 s; T is proportional to B^(-1/2), so 4B halves it.
Sanity check: Units: sqrt(kg m²/(J)) = sqrt(s²) = s. A period near 2 s for a light magnet in the earth field is of the right order for a hand-held compass needle on a pivot.
Example 6 (medium)
A paramagnetic substance has susceptibility 1.2 x 10⁻5 at 300 K. Using Curie law, find the susceptibility at 200 K.
| Step | Marks |
|---|---|
| Curie law: chi is proportional to 1/T, so chi T is constant. | 1 |
| chi(200 K) = 1.2 x 10⁻5 x 300/200. | 1 |
| chi(200 K) = 1.8 x 10⁻5. | 1 |
| Total: 3 marks | 3 |
Answer: 1.8 x 10⁻5
Fast method: The temperature falls by 2/3, so chi rises by 3/2: 1.2 x 10⁻5 x 1.5 = 1.8 x 10⁻5.
Sanity check: Dimensionless. Cooling raises the susceptibility of a paramagnet, so the new value must exceed the old one, and 1.8 x 10⁻5 is larger than 1.2 x 10⁻5.
Example 7 (hard, multi-step)
Extension beyond the listed syllabus line (quantitative magnetic materials). A long solenoid has 500 turns per metre and carries 0.80 A. Its core is soft iron of relative permeability 1500. Find the field B in the core, in tesla, and the magnetisation M_vol in the core in A/m. Take mu0 = 4 pi x 10⁻7 T m/A. Give B.
| Step | Marks |
|---|---|
| The magnetising field is H = n I = 500 x 0.80 = 400 A/m. | 1 |
| B = mu0 mu_r H = 4 pi x 10⁻7 x 1500 x 400. | 2 |
| B = 0.754 T. | 1 |
| Magnetisation M_vol = chi H = (mu_r - 1) H = 1499 x 400 = 5.996 x 10⁵ A/m. | 2 |
| Total: 6 marks | 6 |
Answer: B about 0.754 T; M_vol about 6.0 x 10⁵ A/m
Fast method: B = mu_r x (mu0 n I) = 1500 x 5.03 x 10⁻4 = 0.754 T.
Sanity check: Units: T and A/m. The empty-solenoid field is 0.503 millitesla, and the iron multiplies it by 1500. In practice the permeability of iron falls near saturation, so a real core gives less, but the item states mu_r.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Dipole moment of a loop | M = N I A | planar current loop of N turns, area A | A m² = J/T | Example 1 |
| Bar magnet | M = m (2l) | bar magnet of pole strength m and length 2l (distance between poles) | A m² (m in A m) | none |
| Short magnet, axial field | B = (mu0/4 pi) 2M/d³ | short magnet, d much larger than magnet length, d from centre | T | Example 3 |
| Short magnet, equatorial field | B = (mu0/4 pi) M/d³ | short magnet, d much larger than magnet length, d from centre | T | Example 3 |
| Torque on a dipole | tau = M B sin(theta) | dipole in uniform field; theta is angle between M and B | N m | Example 2 |
| Potential energy | U = -M B cos(theta) | dipole in uniform field; zero of energy at theta = 90 degrees | J | none |
| Small oscillations | T = 2 pi sqrt(I/(M B)) | small angular oscillations of a magnet in uniform B; I is moment of inertia | s | Example 5 |
| Magnetisation and permeability | M_vol = chi H; mu_r = 1 + chi; B = mu0 mu_r H | linear magnetic material, H is the magnetising field | A/m (dimensionless, T) | Example 7 |
| Curie law (paramagnet) | chi = C/T | paramagnetic substance, T in kelvin, not near saturation | dimensionless; T in kelvin | Example 6 |
Common mistakes and speed
- Measuring the distance d from a pole instead of from the centre of the magnet. Why it tempts: The pole is the visible end of the magnet, but the short-magnet formulas use the distance from the centre.
- Taking the axial and equatorial fields as equal at the same distance. Why it tempts: Both fall as 1/d³, so the factor of 2 between them is easily forgotten; an option with the wrong factor is always offered.
- Believing each piece of a cut magnet has the full moment, or only one pole. Why it tempts: Poles seem to be fixed charges that can be separated; in fact each piece is a smaller magnet with two poles and half the moment.
- Saying paramagnetic susceptibility is independent of temperature. Why it tempts: Diamagnetic susceptibility is independent of temperature, and the two cases get mixed; paramagnetic chi follows 1/T.
- Using sin instead of cos in the energy U = -M B cos(theta). Why it tempts: The torque has sin(theta), so the same function is carried over to the energy, but the energy depends on cos(theta).
Time per question and fast method
Target: about 100 seconds per question.
Axial is twice equatorial at the same distance; fields go as 1/d³, so use ratios of distances cubed. For dipole energy use M B (cos theta1 - cos theta2). For Curie law write chi T = constant. For classification use the sign and size of chi, and the temperature behaviour.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 5 correct. Pick an option for each question.
Practice
- A circular coil of 50 turns and radius 5.0 cm carries a current of 0.40 A. The magnitude of its magnetic… Verified (T1)
- The magnetic field of a short bar magnet at a point on its axis, 30 cm from its centre, is 4.0 microtesla.… Verified (T1)
- A magnetic dipole of moment 0.60 A m² is in a uniform magnetic field of 0.25 T. It is turned slowly from an… Verified (T1)
- A long solenoid with 2000 turns per metre carries a current of 2.5 A. Its core is a paramagnetic material of… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Magnetic moment and the equivalent solenoid
M = N I A for a loop, and for a bar magnet M = m x (2l) with pole strength m in A m. The equivalence with a solenoid means B inside a bar magnet runs from the south pole to the north pole and the outside lines run north to south, closing on themselves. Field lines never cross, are closed, and are denser where the field is stronger. For a loop of radius R at distances much larger than R on the axis, B = (mu0/4 pi) 2M/x³, the dipole form, which follows from the axial formula of the loop. Extension beyond the listed syllabus: for an orbiting electron M = (e/2m) L, a result sometimes asked as the ratio M/L. Units: A m² = J/T.
Axial and equatorial fields: use and edge cases
Short magnet: axial (end-on) B = (mu0/4 pi) 2M/d³, equatorial (broadside) B = (mu0/4 pi) M/d³ with d measured from the centre. Extension beyond the listed syllabus (which asks the short-magnet axial and equatorial fields): for a magnet of finite length 2l the exact forms are B_axial = (mu0/4 pi) 2M d/(d² - l²)² and B_equatorial = (mu0/4 pi) M/(d² + l²)^(3/2); they reduce to the short-magnet forms when d is much larger than l. Equatorial field is opposite to the direction of M; axial field is along M. Typical items: ratio of fields at two distances (cube of the ratio), compare axial and equatorial, find M from one reading, or locate a neutral point when the earth field is given. Always use the distance from the centre of the magnet, not from a pole.
Torque, energy and oscillations of a magnet
tau = M B sin(theta) restores the magnet towards theta = 0. U = -M B cos(theta); the change in U between two orientations equals the work done by the external agent, W = M B (cos theta1 - cos theta2). Stable equilibrium at theta = 0, unstable at 180 degrees, torque zero at both. Small oscillation about the field direction: T = 2 pi sqrt(I/(M B)), so doubling B lowers the period by the factor sqrt 2, and the frequency measures B for a known M and I. Combining two fields at an angle, the magnet aligns with their vector sum. In a non-uniform field a dipole also feels a net force towards stronger field if M is along B.
Magnetic materials: susceptibility and permeability
Extension beyond the listed syllabus line, which asks only for the qualitative classification and the effect of temperature; the quantitative relations below are standard textbook material and rarely needed. Magnetisation M_vol (A/m, dipole moment per unit volume, not the moment M in A m²); H = n I is the magnetising field of the solenoid; B = mu0 (H + M_vol) = mu0 mu_r H with mu_r = 1 + chi. Dia: chi negative of order 10⁻5, mu_r slightly below 1, temperature independent. Para: chi positive of order 10⁻5 to 10⁻3 and chi = C/T (Curie law), mu_r slightly above 1; the susceptibility falls as temperature rises because thermal motion disorders the dipoles. Ferro: chi of order 10³ or more, mu_r large, nonlinear with hysteresis, with domains; heating above the Curie temperature makes it paramagnetic. Soft iron has low retentivity and coercivity, suitable for electromagnets; steel keeps its magnetism, suitable for permanent magnets (retentivity and coercivity are an extension beyond the syllabus line; hysteresis detail is not needed).
Effect of temperature and typical conceptual questions
Temperature leaves a diamagnetic substance unchanged, lowers paramagnetic susceptibility as 1/T, and removes ferromagnetism at the Curie temperature. Typical statements to judge: a diamagnetic material is repelled by a strong magnet, paramagnetic materials are attracted weakly, ferromagnets are strongly attracted and are used for cores. A material with a small positive chi is paramagnetic; a negative chi means diamagnetic; a large positive chi means ferromagnetic. For a Curie-law item write chi1 T1 = chi2 T2, and for a field in a filled solenoid use B = mu0 mu_r n I. A superconductor behaves as a perfect diamagnet with chi = -1; it is not required beyond this remark.
Memory hook
Suppose you hang a small bar magnet from a thread, or float a needle magnet on a piece of cork in a bowl of water, and give it a push.
- The magnet swings back and forth around the north-south line instead of staying where you left it.
- The earth field pulls on its poles with a torque, and the torque is greatest when the magnet is turned square to the field.
- A heavier or longer magnet swings more slowly, while a stronger magnet in a stronger field swings faster.
The restoring torque M B sin(theta) makes the magnet oscillate with period 2 pi sqrt(I/(M B)).
A magnet in a field is a pendulum: stronger field, faster swing.
Revision card
Try to answer each without looking above.
- Write the dipole moment of a current loop and of a bar magnet and give its unit.
- Give the axial and equatorial fields of a short bar magnet and their ratio.
- Write the torque and energy of a dipole in a uniform field and name the stable equilibrium.
- Give the period of small oscillations of a magnet in a field.
- Say how a diamagnetic, a paramagnetic and a ferromagnetic substance differ in the sign and size of chi.
- State Curie law and the effect of temperature on each of the three kinds of material.
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 2; fixed: 2
- Report: content/reviews/learn5-mag-2026-11-20.md
Textbook references
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 4: Moving Charges and Magnetism, Summary Summary (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 5: Magnetism and Matter, 5.2.4 The electrostatic analog (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 5: Magnetism and Matter, 5.2.3 The dipole in a uniform magnetic field (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 5: Magnetism and Matter, Summary Summary (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 4: Moving Charges and Magnetism, 4.9.2 Circular current loop as a magnetic dipole (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 5: Magnetism and Matter, 5.2.2 Bar magnet as an equivalent solenoid (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 5: Magnetism and Matter, 5.5 Magnetic Properties of Materials (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 5: Magnetism and Matter, 5.1 Introduction (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 5: Magnetism and Matter, 5.5.2 Paramagnetism (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 5: Magnetism and Matter, 5.5.3 Ferromagnetism (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 5: Magnetism and Matter, Example 5.5 Example 5.5 (read 2026-11-22)
Sources used
- NTA JEE (Main) 2026 syllabus, Physics, Unit 13 (https://jeemain.nta.nic.in/document/syllabus-2026/), read for scope
- Standard results of school-level magnetism and magnetic effects of current; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.