EngineeringRise

Gravitation: Law and Variation of g, JEE Main Notes

Reviewed Last updated 2026-11-20. Syllabus topic: Universal law of gravitation and variation of g.

In short. Gravitation is an attractive inverse-square force, F = G m1 m2/r². Surface gravity is g = G M/R². It falls with height as 1/(R + h)², falls linearly with depth to zero at the centre, and is reduced slightly by rotation, most at the equator.

  • F = G m1 m2/r² acts along the line joining the centres of two point masses (or uniform spheres, measured from their centres); G = 6.67 x 10⁻11 N m²/kg².
  • g = G M/R² = 4 pi G rho R/3 for a uniform sphere; units m/s² or N/kg.
  • Above the surface g_h = g R²/(R + h)², about g (1 - 2h/R) when h is much smaller than R.
  • Inside a uniform sphere g_d = g (1 - d/R): zero at the centre, maximum at the surface.
  • Rotation at latitude lambda: g_eff = g - omega² R cos²(lambda); no effect at the poles, largest at the equator.

Syllabus line: Gravitation The universal law of gravitation. Acceleration due to gravity and its variation with altitude and depth. Kepler's law of planetary motion. Gravitational potential energy, gravitational potential. Escape velocity, motion of a satellite, orbital velocity, time period and energy of satellite. (NTA JEE (Main) 2026 syllabus, Physics, Unit 6 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

Related topics

The concept step by step

  1. The inverse-square law

    Every pair of masses attracts with a force along the line joining them. For point masses m1 and m2 a distance r apart, F = G m1 m2/r², where G = 6.67 x 10⁻11 N m²/kg². The two forces are equal and opposite (Newton third law). Double the distance and the force becomes one quarter. A uniform sphere acts on outside points as if all its mass were at its centre, so r is always measured between centres.

  2. Gravitational field and g at the surface

    The force per unit mass at a point is the gravitational field, in N/kg, which equals the acceleration of a freely falling body. At the surface of a planet of mass M and radius R, g = G M/R². Writing M = (4/3) pi R³ rho gives g = (4/3) pi G rho R, so for the same density g is proportional to R. A very useful substitution is G M = g R², which removes G and M from many problems.

  3. Variation of g with height

    At a height h above the surface the distance from the centre is R + h, so g_h = G M/(R + h)² = g R²/(R + h)² = g/(1 + h/R)². For small h, expand: g_h is about g (1 - 2h/R). g falls as the inverse square of the distance from the centre. Height is always measured from the surface, but the formula needs the distance from the centre; this is the commonest source of error at height R, 2R and R/2.

  4. Variation of g with depth

    Inside a uniform sphere only the mass within radius r pulls on a body at r, and that mass is M r³/R³. So g at distance r from the centre is g r/R. At a depth d, r = R - d and g_d = g (1 - d/R). It falls linearly to zero at the centre. The surface value is the maximum for a uniform planet. Compare with height: above the surface g falls as 1/r², below it falls as r.

  5. Effect of rotation and shape

    A body fixed to the Earth moves in a circle about the axis, so part of the gravitational pull supplies the centripetal force. At latitude lambda the effective gravity is g_eff = g - omega² R cos²(lambda), approximately. It is smallest at the equator, g - omega² R, and equals g at the poles. If the Earth spun so fast that omega² R = g, bodies at the equator would be weightless. This is a correction of about 0.03 m/s² for the real Earth.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

Two lead spheres of mass 10 kg each have their centres 1.0 m apart. Take G = 6.67 x 10⁻11 N m²/kg². Find the gravitational force between them, in N.

Marks-style solution of example 1
StepMarks
F = G m1 m2/r².1
F = 6.67 x 10⁻11 x 10 x 10/(1.0)².1
F = 6.67 x 10⁻9 N.1
Total: 3 marks3

Answer: 6.67 x 10⁻9 N

Fast method: G x 100 = 6.67 x 10⁻9 N, because r² = 1.

Sanity check: Units: N m²/kg² x kg²/m² = N. The force is tiny, as expected for laboratory masses, because G is so small.

Example 2 (easy)

Take g = 9.8 m/s² at the surface of the Earth, of radius R. Find g at a height equal to R above the surface, in m/s².

Marks-style solution of example 2
StepMarks
The distance from the centre is R + R = 2R.1
g_h = g R²/(2R)² = g/4.1
g_h = 9.8/4 = 2.45 m/s².1
Total: 3 marks3

Answer: 2.45 m/s²

Fast method: Height R means distance 2R, so divide by 2² = 4.

Sanity check: Units: m/s². The value is below 9.8, as it must be at a greater distance, and equals a quarter, not a half.

Example 3 (medium)

Take g = 9.8 m/s² at the surface and treat the Earth as uniform. Find g at a depth equal to one quarter of the radius, in m/s².

Marks-style solution of example 3
StepMarks
Inside a uniform sphere g_d = g (1 - d/R).1
With d = R/4, g_d = g x 0.75.1
g_d = 9.8 x 0.75 = 7.35 m/s².1
Total: 3 marks3

Answer: 7.35 m/s²

Fast method: Depth fraction 1/4 means g falls by 1/4: 0.75 x 9.8 = 7.35 m/s².

Sanity check: Units: m/s². At depth R/4, g is between the surface value 9.8 and the central value 0, and 7.35 lies between them.

Example 4 (medium)

Masses 4 kg and 1 kg are 6.0 m apart. A small test mass is placed on the line joining them. Find its distance from the 4 kg mass, in m, at which the net gravitational force on it is zero.

Marks-style solution of example 4
StepMarks
Let the distance from the 4 kg mass be x. Zero net force needs G 4/x² = G 1/(6 - x)².1
Take roots: 2/x = 1/(6 - x), so 2 (6 - x) = x.1
12 = 3x, so x = 4 m from the 4 kg mass (2 m from the 1 kg mass).1
Total: 3 marks3

Answer: 4 m from the 4 kg mass

Fast method: The distances are in the ratio root(4) : root(1) = 2 : 1, so divide 6 m in the ratio 2 : 1.

Sanity check: Units: m. The point lies nearer the smaller mass, 2 m from it, and the two pulls are 4/16 and 1/4, equal, as required.

Typical trap: Taking the midpoint. The point of zero force lies nearer the smaller mass, because the larger mass pulls harder at equal distance.

Example 5 (hard, multi-step)

A planet has one tenth of the mass and one half of the radius of the Earth. Take g = 9.8 m/s² on the Earth. Find the weight on this planet, in N, of a 60 kg body.

Marks-style solution of example 5
StepMarks
g_p/g = (M_p/M)(R/R_p)² = 0.1 x 4 = 0.4.2
g_p = 0.4 x 9.8 = 3.92 m/s².1
Weight = 60 x 3.92 = 235.2 N.1
Total: 4 marks4

Answer: 235.2 N

Fast method: Ratio of g is 0.1/0.25 = 0.4; weight = 0.4 x 60 x 9.8 = 235.2 N.

Sanity check: Units: N. The surface weight on Earth is 588 N, and 235.2 N is 0.4 of that, consistent with g_p being 40 percent of g.

Example 6 (hard)

Treat the Earth as a uniform sphere of radius 6400 km. At what height above the surface does g decrease by 1 percent of its surface value, in km?

Marks-style solution of example 6
StepMarks
Require g_h/g = 0.99 = 1/(1 + h/R)².1
1 + h/R = 1/root(0.99) = 1.005038.2
h = 0.005038 x 6400 km = 32.2 km.1
Total: 4 marks4

Answer: about 32.2 km

Fast method: Using g_h = g (1 - 2h/R): 2h/R = 0.01, so h = R/200 = 32 km.

Sanity check: Units: km. The height is tiny compared with R, so the approximation 2h/R is valid, and the exact answer 32.2 km agrees with R/200 = 32 km.

Example 7 (medium)

Treat the Earth as a sphere of radius 6.4 x 10⁶ m, g = 9.8 m/s² at the poles and angular speed 7.27 x 10⁻5 rad/s. Find the effective g at the equator, in m/s².

Marks-style solution of example 7
StepMarks
Effective g at the equator = g - omega² R.1
omega² R = (7.27 x 10⁻5)² x 6.4 x 10⁶ = 0.0338 m/s².1
g_eff = 9.8 - 0.0338 = 9.766 m/s².1
Total: 3 marks3

Answer: 9.766 m/s²

Fast method: The rotation term is about 0.034 m/s², so subtract it from 9.8.

Sanity check: Units: m/s². The correction is 0.35 percent, small, and the equator value is below the pole value, as expected.

Formulas and units

Formula and unit box for Universal law of gravitation and variation of g
ResultFormulaValid whenUnits or noteWorked example
Law of gravitationF = G m1 m2/r²point masses or uniform spheres, r measured between centresNExample 1
Gravitational constantG = 6.67 x 10⁻11not applicableN m²/kg²Example 1
Surface gravityg = G M/R² = (4/3) pi G rho Rspherical body, rotation ignored; (4/3) pi G rho R needs uniform densitym/s²Example 5
g at height hg_h = g R²/(R + h)², about g (1 - 2h/R) for small hspherical Earth, h above the surface; the (1 - 2h/R) form needs h much less than Rm/s²Example 2
g at depth dg_d = g (1 - d/R)uniform sphere, d below the surfacem/s²Example 3
g at distance r inside a uniform sphereg r/Runiform solid sphere, r less than R from the centrem/s²none
Effective g at latitude lambdag - omega² R cos²(lambda)spherical rotating Earth; approximate, omega² R much less than gm/s²Example 7
Equatorial weightlessnessomega = root(g/R), T = 2 pi root(R/g) = 84.6 minhypothetical Earth spinning until effective g at the equator is zerorad/s (s)none
Useful substitutionG M = g R²at or near the surface of a spherical body, rotation ignoredm³/s²none

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Using the height above the surface as the distance in the inverse-square law. Why it tempts: The stem gives h and the formula looks like g/h², but the distance from the centre is R + h; for h = R the correct value is g/4.
  • Using g (1 - d/R) above the surface or g R²/(R + h)² below it. Why it tempts: Both formulas look like a fractional change in g, and the symbols d and h are easily swapped.
  • Taking the zero-force point between two masses at the midpoint. Why it tempts: Symmetry feels natural, but the larger mass pulls harder at equal distance, so the point lies nearer the smaller mass.
  • Confusing G with g. Why it tempts: Both are called gravitational constants in casual speech; G is universal, g depends on the planet and the position.
  • Forgetting the square root when going from the centripetal term to angular speed. Why it tempts: The ratio of omega² R terms is easy to find and looks like a final value, but omega is the square root of that ratio.

Time per question and fast method

Target: about 90 seconds per question.

Replace G M by g R² and work in ratios of R. Height h means distance R + h from the centre; depth d means distance R - d with a linear law. For zero-force points divide the separation in the ratio of the square roots of the masses.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. What is g, in m/s², at a height 2R above the surface if g = 9.8 m/s² at the surface?
Show the answer

Answer: A: 1.09 m/s². The distance from the centre is 3R, so g/9 = 1.09 m/s².

Question 2. What is g, in m/s², at a depth R/2 inside a uniform Earth if g = 9.8 m/s² at the surface?
Show the answer

Answer: B: 4.9 m/s². g_d = g (1 - 1/2) = 4.9 m/s².

Question 3. The distance between two masses is tripled. By what factor does the force change?
Show the answer

Answer: C: 1/9. F is proportional to 1/r², so the force becomes 1/9.

Question 4. Where inside a uniform planet is g zero?
Show the answer

Answer: B: At the centre. g_d = g (1 - d/R) becomes zero at d = R, the centre.

Question 5. What is the equatorial angular speed, in rad/s, at which a body is weightless, for g = 9.8 m/s² and R = 6.4 x 10⁶ m?
Show the answer

Answer: B: 1.24 x 10⁻3 rad/s. omega = root(g/R) = root(9.8/6.4 x 10⁶) = 1.24 x 10⁻3 rad/s.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Statement, constants and units

The law F = G m1 m2/r² holds for point masses and for uniform spherical bodies with r between centres. G is a universal constant with units N m²/kg² and dimensions M⁻1 L³ T⁻2; it is not the same as g. The field strength g has units N/kg = m/s². For two bodies on a line, forces from several masses add as vectors, and the point where the net force on a test mass is zero lies between two attracting masses, nearer the smaller one. Mass is the same everywhere; weight depends on the local g.

Height, depth and the two formulas

Above the surface: g_h = g R²/(R + h)², and the approximate g (1 - 2h/R) is valid only for h much smaller than R (error about 3 (h/R)²). Below: g_d = g (1 - d/R), exact for a uniform sphere. Typical comparisons ask for the height at which g equals its value at a given depth, or the depth for a given fraction of g. At h = R, g_h = g/4; at h = 2R, g/9; at d = R/2, g/2; at the centre g = 0. The real Earth is denser at the core, so the linear law is a model; JEE Main uses the uniform model unless told otherwise.

Rotation, latitude and apparent weight

Apparent weight at the equator is m (g - omega² R); at latitude lambda the radial component of the effective g is g - omega² R cos²(lambda). The direction of the plumb line also deviates slightly except at the poles and the equator. For the Earth, omega = 2 pi/(24 x 3600 s) = 7.27 x 10⁻5 rad/s and omega² R = 0.034 m/s², so the reduction is about 0.35 percent. A question may ask for the angular speed at which a body at the equator is weightless: omega = root(g/R), period 84.6 minutes for R = 6400 km. If a body at the equator only weighs a fraction of its pole weight, solve omega² R = (1 - fraction) g.

Density form and comparison between planets

For uniform planets g = (4/3) pi G rho R. Hence g1/g2 = (rho1 R1)/(rho2 R2) = (M1/M2)(R2/R1)². A planet with mass one tenth and radius one half of the Earth has g = 0.1 x 4 = 0.4 of the Earth value. Questions give ratios rather than numbers, so work with ratios and multiply by 9.8 m/s² at the end. Check dimensions: G M/R² gives N m²/kg² x kg/m² = N/kg. The force between two bodies does not change when a third body is brought nearby; the net force on any one body is the vector sum of the pairs.

What examiners test

Typical items: (a) weight or g at heights R/2, R, 2R from a surface value; (b) depth versus height equal-g comparisons; (c) the zero-force point between two masses; (d) the equatorial weightlessness angular speed or period; (e) ratio of g on two planets from mass and radius or density and radius; (f) fractional change of g for small height, answer 2h/R. Wrong options usually come from measuring height from the surface instead of the centre, using the linear law above the surface, or dropping a square. Time target: about 90 seconds.

Memory hook

Suppose you stand on a terrace holding a heavy school bag. The bag feels the same on the terrace as on the ground, and you imagine a ladder so tall that the ground looks small.

  1. On the terrace your distance from the Earth centre has barely changed, so g and the weight of the bag are almost the same.
  2. On the imaginary very tall ladder, the distance from the centre grows, and the pull falls as the square of that distance, so the bag weighs much less.
  3. If you could dig a deep shaft instead, the pull would fall too, but now because less of the Earth is below you, and it would vanish at the centre.

Above the surface g falls as 1/r² from the centre; below the surface it falls in proportion to r, reaching zero at the centre.

Up: inverse square from the centre. Down: straight line to zero.

Revision card

Try to answer each without looking above.

  1. State the law of gravitation and give the value and units of G.
  2. Write g in terms of G, M and R, and the substitution G M = g R².
  3. Write g at height h and at depth d, and say where each formula applies.
  4. Give the effective g at the equator and the condition for weightlessness there.
  5. How do you find the point of zero net force between two masses?
  6. What is g on a planet of mass ratio m and radius ratio r compared with the Earth?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 2; fixed: 2
  • Report: content/reviews/learn5-grv-2026-11-20.md

Textbook references

  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 7: Gravitation, 7.4 THE GRAVITATIONAL CONSTANT (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 7: Gravitation, 7.6 ACCELERATION DUE TO GRAVITY BELOW AND ABOVE THE SURFACE OF EARTH (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 7: Gravitation, Summary SUMMARY (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 7: Gravitation, 7.8 ESCAPE SPEED (read 2026-11-22)
  • NCERT Physics Part 1, Class 11 (reprint 2026-27), Chapter 7: Gravitation, 7.5 ACCELERATION DUE TO GRAVITY OF THE EARTH (read 2026-11-22)

Sources used

  • NTA JEE (Main) 2026 syllabus, Physics, Unit 6 (https://jeemain.nta.nic.in/document/syllabus-2026/), read for scope
  • Standard results of school-level gravitation; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.