Resistance, Resistivity and Power: JEE Main Notes
Reviewed Last updated 2026-11-20. Syllabus topic: Resistance, resistivity, combinations and power.
In short. Resistance R = rho L/A is fixed by material (resistivity rho), length and area. Series resistors share the current and add; parallel resistors share the voltage and their conductances add. Power is I² R = V²/R, and metal resistance rises with temperature.
- R = rho L/A; resistivity rho depends on material and temperature, not on the size of the sample; conductivity sigma = 1/rho.
- Series: R = R1 + R2 + ...; same current, power proportional to R. Parallel: 1/R = 1/R1 + 1/R2 + ...; same voltage, power proportional to 1/R.
- Power P = V I = I² R = V²/R; energy in kilowatt hour: 1 kWh = 3.6 x 10⁶ J; a rated bulb has R = V_rated²/P_rated.
- Wire stretched at constant volume: R is proportional to L² (and to 1/A²); a wire of resistance R cut into n equal pieces has R/n each.
- Metals: R_t = R₀ (1 + alpha t) with alpha positive; semiconductors and carbon have negative alpha.
Syllabus line: Current Electricity Electric current: drift velocity, mobility and their relation with electric current, Ohm's law, electrical resistance, I-V characteristics of Ohmic and non-ohmic conductors, electrical energy and power, electrical resistivity and conductivity, series and parallel combinations of resistors, temperature dependence of resistance. Internal resistance, potential difference and emf of a cell, a combination of cells in series and parallel. Kirchhoff's laws and their applications, Wheatstone bridge, Metre Bridge. (NTA JEE (Main) 2026 syllabus, Physics, Unit 12 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Current, drift velocity and Ohm law: Resistance is defined from Ohm law, and resistivity comes from the microscopic form. Read this first if V = I R or sigma = n e mu is unclear.
- Electrostatics: potential difference (lesson planned): Parallel resistors share one potential difference. Read this first if potential difference across a branch is not clear.
- Work, kinetic energy and power: Electrical power is the same rate of energy transfer. Read this first if watt, joule and kilowatt hour mix up.
Related topics
- Current, drift velocity and Ohm law
- Cells, Kirchhoff laws and bridges
- Current Electricity (lesson planned)
- Electronic Devices (lesson planned)
The concept step by step
Resistance of a wire: R = rho L/A
Resistance opposes current. For a uniform conductor of length L and cross-sectional area A, R = rho L/A. The constant rho, the resistivity, belongs to the material at a given temperature, in ohm metre. Its reciprocal sigma = 1/rho is the conductivity, in siemens per metre. A longer wire is harder to push current through (R grows with L); a thicker wire is easier (R falls as A grows). When the cross-section is a circle, A = pi d²/4 where d is the diameter; confusing diameter and radius is the most common slip.
Resistors in series
Resistors joined end to end carry the same current. The potential differences add: V = I R1 + I R2 + ..., so R_series = R1 + R2 + .... The equivalent is larger than the largest resistor. The potential difference divides in proportion to the resistances, and so does the power, because P = I² R at equal current. A series chain is how a long wire behaves: adding length adds resistance.
Resistors in parallel
Resistors across the same two points have the same potential difference, and the currents add: I = V/R1 + V/R2 + .... So 1/R = 1/R1 + 1/R2 + ..., that is, conductances add. The equivalent is smaller than the smallest resistor. For two resistors R = R1 R2/(R1 + R2); n equal resistors give R/n. The current divides inversely as the resistances, and the power divides in the same way, because P = V²/R at equal voltage. To reduce a network, replace parallel and series groups step by step, and redraw after each step.
Heating effect and electrical power
When charge q falls through potential difference V, the energy given up is q V. In time t with current I the energy is V I t, so power P = V I, in watt. For a resistor use Ohm law: P = I² R = V²/R. Energy used is P t: in joule if P is in watt and t in second; the commercial unit, the kilowatt hour, is 1000 W for 3600 s, which is 3.6 x 10⁶ J. A bulb marked 220 V, 100 W has resistance V²/P = 484 ohm, assuming that resistance stays fixed.
Temperature dependence of resistance
For metals the resistivity rises almost linearly with temperature over a moderate range: R_t = R₀ (1 + alpha (t - t₀)), where alpha is the temperature coefficient of resistance, in per degree Celsius. Metals have positive alpha, because collisions with the lattice become more frequent. Carbon and semiconductors have negative alpha, because more carriers become available as the temperature rises. Some alloys have a very small alpha. Two resistors with alpha of opposite signs in series can give a total resistance that does not change with temperature: R1 alpha1 + R2 alpha2 = 0.
Changing the shape of a wire
If a wire is stretched or drawn out, its volume A L stays the same. If L becomes k L, then A becomes A/k, so R becomes k² R. A wire stretched to double length has four times the resistance; one stretched by 1 percent has about 2 percent more. If a wire is cut into n equal pieces, each has resistance R/n; joined in parallel they give R/n², and joined in series they give back R. These shape problems rarely need numbers; write R proportional to L² for constant volume.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
A 4 ohm resistor is connected in series with a parallel pair of 6 ohm and 3 ohm resistors. Find the equivalent resistance.
| Step | Marks |
|---|---|
| Parallel pair: 6 x 3/(6 + 3) = 2 ohm. | 2 |
| Add the series resistor: 4 + 2. | 1 |
| Equivalent resistance = 6 ohm. | 1 |
| Total: 4 marks | 4 |
Answer: 6 ohm
Fast method: Parallel pair = product over sum = 2 ohm; add 4.
Sanity check: Units: ohm. The 2 ohm pair is smaller than both 6 ohm and 3 ohm, and the 6 ohm total is larger than the 4 ohm series resistor, so both size rules hold.
Example 2 (easy)
A wire of resistivity 5.0 x 10⁻7 ohm m has length 2.0 m and diameter 0.40 mm. Find its resistance in ohm.
| Step | Marks |
|---|---|
| Radius = 0.20 mm = 2.0 x 10⁻4 m; A = pi r² = 1.257 x 10⁻7 m². | 1 |
| R = rho L/A = 5.0 x 10⁻7 x 2.0/(1.257 x 10⁻7). | 1 |
| R = 7.96 ohm. | 1 |
| Total: 3 marks | 3 |
Answer: about 7.96 ohm
Fast method: Halve the diameter first; A = pi x (0.2 x 10⁻3)²; R = rho L/A.
Sanity check: Units: ohm m x m/m² = ohm. Using the diameter as the radius would give a quarter of this, about 2 ohm, so check the radius step.
Example 3 (medium)
A wire of resistance 12 ohm is stretched uniformly to three times its original length, without change of volume or material. Find the new resistance.
| Step | Marks |
|---|---|
| Constant volume: if L becomes 3 L then A becomes A/3. | 1 |
| R = rho L/A becomes rho (3 L)/(A/3) = 9 R. | 1 |
| New resistance = 9 x 12 = 108 ohm. | 1 |
| Total: 3 marks | 3 |
Answer: 108 ohm
Fast method: Constant volume means R goes as L squared: 12 x 3² = 108 ohm.
Sanity check: Units: ohm. A factor 9 is bigger than the tempting 3, and 108 ohm is far above 36 ohm. For a small stretch of 1 percent the same law gives about 2 percent, as it should.
Example 4 (medium)
A heater is rated 220 V, 2000 W. Find its current and resistance at the rated voltage, and the power it dissipates when connected to a 200 V supply, assuming its resistance is unchanged. Give the power in watt.
| Step | Marks |
|---|---|
| Current I = P/V = 2000/220 = 9.09 A. | 1 |
| Resistance R = V²/P = 48400/2000 = 24.2 ohm. | 1 |
| At 200 V, P = V²/R = 40000/24.2 = 1653 W. | 2 |
| Total: 4 marks | 4 |
Answer: I = 9.09 A, R = 24.2 ohm, P at 200 V = 1650 W (about)
Fast method: P is proportional to V²: 2000 x (200/220)² = 2000 x 0.826 = 1653 W.
Sanity check: Units: A, ohm, W. A drop of 9 percent in voltage gives about 17 percent drop in power (0.826), as the square law predicts. The power at 200 V is below the rated 2000 W.
Example 5 (medium)
Bulbs rated 220 V, 60 W and 220 V, 40 W are connected in series across 220 V. Find the power dissipated in the 60 W bulb, in watt, and say which bulb is brighter.
| Step | Marks |
|---|---|
| R1 = 220²/60 = 806.7 ohm and R2 = 220²/40 = 1210 ohm. | 1 |
| Series current I = 220/(806.7 + 1210) = 0.1091 A. | 1 |
| P1 = I² R1 = 9.6 W and P2 = I² R2 = 14.4 W. | 1 |
| The 60 W bulb dissipates 9.6 W; the 40 W bulb, at 14.4 W, is brighter. | 1 |
| Total: 4 marks | 4 |
Answer: 9.6 W in the 60 W bulb; the 40 W bulb is brighter
Fast method: In series the power shares in the ratio of the resistances, 806.7 : 1210 = 2 : 3, so the 24 W total splits 9.6 W and 14.4 W.
Sanity check: Units: W. The total 24 W equals 220²/2016.7 = 24 W, and both powers are below their ratings, so each bulb is dimmer than normal. In parallel the order would be reversed.
Example 6 (hard, multi-step)
The resistance of a coil is 50 ohm at 20 degrees C and 62 ohm at 100 degrees C. Assuming R_t = R₂0 (1 + alpha (t - 20)), find alpha and the temperature at which the resistance is 68 ohm.
| Step | Marks |
|---|---|
| alpha = (R₁00 - R₂0)/(R₂0 x 80) = 12/(50 x 80). | 1 |
| alpha = 3.0 x 10⁻3 per degree C. | 1 |
| For 68 ohm: 68/50 = 1 + 0.003 (t - 20), so 0.36 = 0.003 (t - 20). | 2 |
| t - 20 = 120, so t = 140 degrees C. | 1 |
| Total: 5 marks | 5 |
Answer: alpha = 3.0 x 10⁻3 per degree C; t = 140 degrees C
Fast method: Rise per degree = 12/80 = 0.15 ohm per degree. Needed rise 18 ohm, so 120 degrees above 20.
Sanity check: Units: per degree C and degree C. The temperature 140 degrees C lies beyond 100 degrees C, consistent with 68 ohm being above 62 ohm. At 20 degrees C the formula returns 50 ohm, the starting value.
Example 7 (hard, multi-step)
A 12 ohm and a 6 ohm resistor in parallel are connected in series with a 4 ohm resistor across a 20 V battery of negligible internal resistance. Find the power dissipated in the 12 ohm resistor, in watt.
| Step | Marks |
|---|---|
| Parallel pair = 12 x 6/18 = 4 ohm; total = 4 + 4 = 8 ohm. | 1 |
| Current from the battery = 20/8 = 2.5 A. | 1 |
| Voltage across the pair = 2.5 x 4 = 10 V. | 1 |
| P in 12 ohm = V²/R = 100/12 = 8.33 W. | 1 |
| Total: 4 marks | 4 |
Answer: about 8.33 W
Fast method: The pair and the 4 ohm are equal, so each gets 10 V. Then 10²/12 = 8.33 W.
Sanity check: Units: W. Check: 12 ohm takes 8.33 W, 6 ohm takes 16.67 W, 4 ohm takes 25 W; the sum 50 W equals 20 V x 2.5 A = 50 W, energy is conserved.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Resistance of a wire | R = rho L/A | uniform wire at constant temperature, current along its length | ohm (rho in ohm m) | Example 2 |
| Conductivity and conductance | sigma = 1/rho; G = 1/R | not applicable | S/m (S) | none |
| Series | R = R1 + R2 + ... | same current flows through every resistor | ohm | Example 1 |
| Parallel | 1/R = 1/R1 + 1/R2 + ...; two resistors R1 R2/(R1 + R2) | same voltage across every branch | ohm | Example 1 |
| Electrical power | P = V I = I² R = V²/R | P = VI always; I²R and V²/R for a resistor | W | Example 4 |
| Energy | W = P t; 1 kWh = 3.6 x 10⁶ J | constant power over time t | J (kWh) | none |
| Rated appliance | R = V_rated²/P_rated; P = P_rated (V/V_rated)² | appliance resistance stays constant when voltage changes | ohm (W) | Example 4 |
| Stretching at constant volume | R2/R1 = (L2/L1)² | uniform stretch at constant volume and material | dimensionless | Example 3 |
| Temperature dependence (metals) | R_t = R₀ (1 + alpha t); alpha = (R2 - R1)/(R1 (t2 - t1)) | metals over a modest temperature range | per degree C | Example 6 |
| Zero temperature drift (series pair) | R1 alpha1 + R2 alpha2 = 0 | two resistors in series, small temperature range; alphas of opposite sign | ohm per degree C | none |
Common mistakes and speed
- Taking R proportional to L for a wire that is stretched. Why it tempts: R = rho L/A shows L alone; but the area shrinks when the wire is drawn at constant volume, so R goes as L squared.
- Believing the higher-wattage bulb is brighter when two bulbs are in series. Why it tempts: Wattage suggests brightness, but in series the same current flows and the bulb with the larger resistance dissipates more.
- Using the diameter as the radius in A = pi r². Why it tempts: Wire sizes are quoted as diameters; the wrong area is four times too large and the answer is a quarter of the right one, which is often one of the options.
- Adding parallel resistances directly. Why it tempts: Series addition is automatic; the result must be smaller than every branch, and that check catches the slip.
- Taking resistivity of a wire as changing when it is stretched. Why it tempts: Resistance changes dramatically, so students assume the material property changes; rho is fixed by material and temperature only.
- Using a negative alpha for a metal or a positive alpha for carbon. Why it tempts: Students remember that metals gain resistance when heated and may apply that rule to carbon and semiconductors, whose resistance falls as temperature rises.
Time per question and fast method
Target: about 90 seconds per question.
Reduce a network in steps and apply the size rule after each step. For stretched wires write R proportional to L squared. For bulbs and heaters use R = V²/P and then ask whether the same current (series, P proportional to R) or the same voltage (parallel, P proportional to 1/R) acts. For temperature questions use the slope in ohm per degree.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 5 correct. Pick an option for each question.
Practice
- A uniform wire of resistance 16 ohm is stretched uniformly, its volume unchanged, until its length increases… Verified (T1)
- Two bulbs rated 220 V, 100 W and 220 V, 25 W are connected in series across a 220 V supply. The power… Verified (T1)
- A metal resistor of 20 ohm at 0 degrees C, with temperature coefficient of resistance +4.0 x 10⁻3 per degree… Verified (T1)
- A copper wire of resistivity 1.6 x 10⁻8 ohm m has length 50 m and diameter 0.50 mm. Its resistance, in ohm, is Verified (T1)
- A heating coil is rated 220 V, 500 W. The coil is cut into four equal parts and all four parts are connected… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Resistance, resistivity and conductivity
R = rho L/A with R in ohm, rho in ohm metre, L in metre, A in square metre. Resistivity is a property of the material and temperature; resistance is a property of the particular sample. Resistivity of a metal is small; insulators have very large values. Conductivity sigma = 1/rho has unit siemens per metre, and conductance G = 1/R has unit siemens. Always write A for a circular wire as pi r² with r = d/2, and convert mm to m before substituting: 1 mm = 10⁻3 m, so 1 mm² = 10⁻6 m². For a wire of non-uniform section, split it into thin slices in series and add the slice resistances, R = integral of rho dx/A(x).
Series and parallel combinations, with symmetry shortcuts
Series: R = R1 + R2 + ...; parallel: 1/R = 1/R1 + 1/R2 + .... Check each step: a series sum must be larger than every part, a parallel result smaller than every part. For two in parallel, R = R1 R2/(R1 + R2); with n equal resistors R/n. Networks that do not reduce by series-parallel steps are solved by symmetry (points at the same potential can be joined or the link between them removed), by a balanced bridge, or by Kirchhoff laws, which are in the next topic. A short circuit (a wire in parallel with a resistor) removes that resistor from the current path. Never join two points of different potential by assumption.
Power, heating and rated appliances
P = V I = I² R = V²/R. In series the same current flows, so the resistor with the larger R dissipates more power; in parallel the same voltage acts, so the smaller R dissipates more. Hence two bulbs of different rating in series: the lower-wattage bulb has the larger resistance and glows brighter, a standard trap. A rated appliance has R = V_rated²/P_rated; run at a different voltage V, the power is P_rated (V/V_rated)² if R is taken as constant. Heat produced H = I² R t joule. Energy cost problems use kilowatt hours: energy in kWh = power in kW x time in hours. Cutting a heater coil to a fraction f of its length gives resistance f R and, at the same supply voltage, power P/f.
Temperature dependence: alpha and its consequences
R_t = R₀ (1 + alpha t) where R₀ is at the stated reference temperature. For a rise of temperature from t1 to t2 a convenient form is R2 = R1 (1 + alpha (t2 - t1)) when alpha is defined at t1, valid for small ranges. Resistivity of metals increases with temperature; for semiconductors and carbon it decreases, so alpha is negative. A filament lamp has a much lower resistance when cold, so the current at switch-on is larger than the steady value. Use two readings to find alpha: alpha = (R2 - R1)/(R1 (t2 - t1)). For a series pair with zero net variation, R1 alpha1 + R2 alpha2 = 0 to first order, which needs opposite signs of alpha. The linear formula is an approximation, and the question will say to use it.
What examiners test and edge cases
Frequent forms: resistance from resistivity with diameter given; wire stretched or folded; equivalent resistance of a mixed network or a symmetric one; ratio of powers in series versus parallel for two bulbs; power at reduced voltage; energy in kilowatt hours; resistance at a new temperature or the temperature at which the resistance reaches a value; two resistors with opposite temperature coefficients. Edge cases: a stretched wire has the same material and the same volume, not the same area; the resistivity does not change when the wire is stretched. Keep units consistent and check each combination for the size rule.
Memory hook
Suppose a school has one narrow gate and you are asked how fast pupils can leave at the end of the day, with one long corridor of gates in a row and then several wide gates side by side.
- Gates in a row: every pupil must pass all of them, so each extra gate adds delay. That is a series connection and the resistances add.
- Gates side by side: pupils spread across them, and each extra gate makes leaving easier. That is a parallel connection and the conductances add.
- A longer corridor delays more and a wider corridor delays less, the way R = rho L/A behaves.
Resistance adds for gates in a row, conductance adds for gates side by side, and a long narrow wire is the hardest to pass.
In a row: add the resistances. Side by side: add the conductances.
Revision card
Try to answer each without looking above.
- Write R in terms of resistivity, length and area, and give the unit of resistivity.
- State the equivalent resistance rules for series and parallel, and the size check for each.
- Give three forms of electrical power and say in which resistor of a series pair more power is dissipated.
- How does the resistance of a wire change when it is stretched at constant volume to k times its length?
- Write R_t = R₀ (1 + alpha t) and state the sign of alpha for a metal and for carbon.
- Convert 1 kilowatt hour to joule.
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (see content/reviews/scope-audit-2026-11-20.md)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 2; fixed: 2
- Report: content/reviews/learn2-cur-2026-11-20.md
Textbook references
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 3: Current Electricity, Summary Summary (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 3: Current Electricity, 3.9 ELECTRICAL ENERGY, POWER (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 3: Current Electricity, 3.7 RESISTIVITY OF VARIOUS MATERIALS (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 3: Current Electricity, 3.8 TEMPERATURE DEPENDENCE OF RESISTIVITY (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 12 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
- NTA JEE (Main) 2026 syllabus, Physics, Unit 12 (https://jeemain.nta.nic.in/document/syllabus-2026/), read for scope
- Standard results of school-level current electricity; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.