Cells, Kirchhoff Laws and Bridges: JEE Main Notes
Reviewed Last updated 2026-11-20. Syllabus topic: Cells, Kirchhoff laws and bridges.
In short. A real cell is an emf E in series with an internal resistance r, so its terminal voltage is V = E - I r. Kirchhoff junction and loop laws solve any network. A Wheatstone bridge is balanced when P/Q = R/S, and the metre bridge applies it with X/R = l/(100 - l).
- Terminal voltage V = E - I r while discharging; V = E on open circuit; short-circuit current is E/r.
- n identical cells in series: emf n E, internal resistance n r. m identical cells in parallel: emf E, internal resistance r/m.
- Kirchhoff junction law (charge conservation): sum of currents at a node is zero. Loop law (energy conservation): sum of potential changes around a loop is zero.
- Balanced Wheatstone bridge: P/Q = R/S, the galvanometer carries no current and its branch can be removed.
- Metre bridge: X/R = l/(100 - l), with l measured from the end next to X.
Syllabus line: Current Electricity Electric current: drift velocity, mobility and their relation with electric current, Ohm's law, electrical resistance, I-V characteristics of Ohmic and non-ohmic conductors, electrical energy and power, electrical resistivity and conductivity, series and parallel combinations of resistors, temperature dependence of resistance. Internal resistance, potential difference and emf of a cell, a combination of cells in series and parallel. Kirchhoff's laws and their applications, Wheatstone bridge, Metre Bridge. (NTA JEE (Main) 2026 syllabus, Physics, Unit 12 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Resistance, resistivity, combinations and power: Every circuit here is reduced with series and parallel rules. Read this first if equivalent resistance is not automatic.
- Current, drift velocity and Ohm law: Kirchhoff laws use V = I R on every branch. Read this first if Ohm law is unclear.
- Electrostatics: potential and potential difference (lesson planned): The loop law is a statement about potential. Read this first if the sign of a potential change is unclear.
Related topics
- Resistance, resistivity, combinations and power
- Current, drift velocity and Ohm law
- Current Electricity (lesson planned)
- Magnetic Effects of Current and Magnetism (lesson planned)
The concept step by step
Emf and terminal voltage
A cell does work on each unit charge to move it from the negative to the positive terminal inside the cell. That work per unit charge is the emf E, in volt, measured on open circuit. Inside the cell the chemicals also resist the current, with a small internal resistance r. When a cell supplies a current I, a drop I r occurs inside, so the potential difference across the terminals is V = E - I r. It is less than E while the cell is delivering current. On open circuit I = 0 and V = E.
Cell in a circuit: current and short circuit
Connect the cell to an external resistor R. The same current flows through R and through r, so I = E/(R + r), and the terminal voltage is V = I R = E R/(R + r). If R is made very small, the current approaches E/r, the short-circuit current, and V falls towards zero. This explains why a battery in a short circuit gets hot. To find r in the laboratory or in a question, use two values: r = R (E - V)/V, from E = V + I r with I = V/R.
Cells in series and in parallel
Identical cells joined in series, each of emf E and resistance r: the emf adds and so does the resistance, giving n E and n r. Identical cells in parallel (all positive terminals together): the emf stays E and the resistances combine in parallel, giving r/m for m cells. A grid with m rows of n cells in series each has emf n E and internal resistance n r/m. Then I = n E/(R + n r/m). Series raises the voltage; parallel lowers the internal resistance and shares the load. Check polarity: a cell connected the wrong way subtracts its emf.
Kirchhoff junction and loop laws
Junction law: at any node the algebraic sum of currents is zero, because charge does not pile up. Loop law: round any closed loop the algebraic sum of potential changes is zero, because the electric field is conservative. Rules for signs: going through a resistor along the assumed current is a drop of I R; going through a resistor against the current is a rise. Going through a cell from the negative to the positive terminal is a rise of E; the reverse is a drop. Write one equation per independent loop, one per independent node, and solve. A negative answer means the real current is opposite to the assumed one.
Wheatstone bridge
Four resistors P, Q, R and S form a diamond, with a cell across one diagonal and a galvanometer across the other. When no current passes through the galvanometer, the bridge is balanced, and the two junction points are at the same potential. Then P/Q = R/S. Under this condition the galvanometer branch can be removed or replaced by a wire without changing anything, so the arm P with Q in series is in parallel with R with S in series. The balance condition does not depend on the cell or on the galvanometer, which is why the bridge is a precise comparison method.
Metre bridge
A metre bridge is a Wheatstone bridge in which two of the arms are the two parts of a uniform wire 100 cm long, so their resistances are in the ratio of their lengths. The unknown X is placed in one gap and a known R in the other. The jockey is moved along the wire until the galvanometer shows no deflection, at a distance l from the end on the X side. Then X/R = l/(100 - l), so X = R l/(100 - l). The bridge is most sensitive when l is near 50 cm, so choose R of the same order as X. In JEE Main numerical questions the lengths are taken as read from the scale.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
A cell of emf 12 V and internal resistance 0.5 ohm is connected to a 5.5 ohm resistor. Find the terminal voltage.
| Step | Marks |
|---|---|
| Total resistance = 5.5 + 0.5 = 6.0 ohm, so I = 12/6.0 = 2.0 A. | 2 |
| Terminal voltage V = E - I r = 12 - 2.0 x 0.5. | 1 |
| V = 11 V. | 1 |
| Total: 4 marks | 4 |
Answer: 11 V
Fast method: V = E R/(R + r) = 12 x 5.5/6 = 11 V.
Sanity check: Units: V. The terminal voltage 11 V is below the emf 12 V while the cell delivers current, and V = I R = 2 x 5.5 = 11 V gives the same value.
Example 2 (easy)
Three cells, each of emf 1.5 V and internal resistance 0.2 ohm, are connected in series to a 2.4 ohm resistor. Find the current.
| Step | Marks |
|---|---|
| Series: emf = 3 x 1.5 = 4.5 V and internal resistance = 3 x 0.2 = 0.6 ohm. | 2 |
| Total resistance = 2.4 + 0.6 = 3.0 ohm. | 1 |
| I = 4.5/3.0 = 1.5 A. | 1 |
| Total: 4 marks | 4 |
Answer: 1.5 A
Fast method: I = n E/(R + n r) = 4.5/3.0 = 1.5 A.
Sanity check: Units: A. One cell alone would give 1.5/2.6 = 0.58 A, so three cells in series give a larger current, as expected when R is not small.
Example 3 (medium)
A cell reads 6.0 V on open circuit. When an 8.0 ohm resistor is connected across it the terminal voltage falls to 5.6 V. Find the internal resistance, in ohm.
| Step | Marks |
|---|---|
| Current in the resistor = 5.6/8.0 = 0.70 A. | 1 |
| Drop inside the cell = 6.0 - 5.6 = 0.4 V. | 1 |
| r = 0.4/0.70 = 0.571 ohm. | 1 |
| Total: 3 marks | 3 |
Answer: about 0.571 ohm
Fast method: r = R (E - V)/V = 8 x 0.4/5.6 = 0.571 ohm.
Sanity check: Units: V/A = ohm. The internal resistance is much smaller than 8 ohm, so the terminal voltage is close to the emf, as measured.
Example 4 (medium)
Four identical cells, each of emf 1.5 V and internal resistance 0.8 ohm, are connected in parallel across a 2.8 ohm resistor. Find the current in the resistor.
| Step | Marks |
|---|---|
| Parallel: emf stays 1.5 V and internal resistance = 0.8/4 = 0.2 ohm. | 2 |
| Total resistance = 2.8 + 0.2 = 3.0 ohm. | 1 |
| I = 1.5/3.0 = 0.50 A. | 1 |
| Total: 4 marks | 4 |
Answer: 0.50 A
Fast method: I = E/(R + r/m) = 1.5/3.0 = 0.5 A.
Sanity check: Units: A. In parallel the emf is not increased, so the current is limited by R: it cannot exceed 1.5/2.8 = 0.54 A, and 0.50 A is just below that.
Example 5 (medium)
In a Wheatstone bridge P = 10 ohm, Q = 20 ohm, R = 30 ohm and S = 60 ohm, with a 100 ohm resistor between the two middle points. Find the equivalent resistance between the cell terminals.
| Step | Marks |
|---|---|
| Check balance: P/Q = 10/20 = 0.5 and R/S = 30/60 = 0.5, so the bridge is balanced. | 1 |
| No current in the 100 ohm resistor. The arms P + Q = 30 ohm and R + S = 90 ohm are in parallel. | 1 |
| R_eq = 30 x 90/(30 + 90) = 22.5 ohm. | 1 |
| Total: 3 marks | 3 |
Answer: 22.5 ohm
Fast method: Balanced bridge: (P + Q) in parallel with (R + S) = 30 ohm and 90 ohm, giving 22.5 ohm.
Sanity check: Units: ohm. The answer is below the smallest branch, 30 ohm, as a parallel result must be. A full node-equation solution with the 100 ohm resistor gives the same value.
Example 6 (hard, multi-step)
A cell of emf 10 V and internal resistance 1 ohm and a cell of emf 4 V and internal resistance 2 ohm are connected in parallel, positive terminals together, across a 5 ohm resistor. Find the current in the 5 ohm resistor and say what happens to the 4 V cell.
| Step | Marks |
|---|---|
| Let i1 and i2 be the currents from the cells into the resistor branch, i3 = i1 + i2 in the 5 ohm resistor. | 1 |
| Loop 1: 10 = 1 x i1 + 5 i3. Loop 2: 4 = 2 x i2 + 5 i3. | 2 |
| So i1 = 10 - 5 i3 and i2 = 2 - 2.5 i3; adding gives i3 = 12 - 7.5 i3, hence 8.5 i3 = 12. | 2 |
| i3 = 1.41 A. Then i2 = 2 - 3.53 = -1.53 A, negative, so the 4 V cell is being charged by the 10 V cell. | 1 |
| Total: 6 marks | 6 |
Answer: 1.41 A in the 5 ohm resistor; the 4 V cell is charged (current 1.53 A into it)
Fast method: Junction voltage V = (10/1 + 4/2)/(1/1 + 1/2 + 1/5) = 12/1.7 = 7.06 V, so i3 = 7.06/5 = 1.41 A.
Sanity check: Units: A and V. V = 7.06 V is above 4 V, so the 4 V cell has current pushed into its positive terminal (it is charged), consistent with the sign. Energy check: 10 x 2.94 - 4 x 1.53 = 23.3 W equals 1.41² x 5 + 2.94² x 1 + 1.53² x 2 = 9.97 + 8.65 + 4.67 = 23.3 W.
Example 7 (medium)
In a metre bridge an unknown resistance X is in the left gap and 15 ohm is in the right gap. The null point is at 35.0 cm from the left end. Find X, in ohm.
| Step | Marks |
|---|---|
| Balance: X/R = l/(100 - l). | 1 |
| X/15 = 35/65. | 1 |
| X = 15 x 35/65 = 8.08 ohm. | 1 |
| Total: 3 marks | 3 |
Answer: about 8.08 ohm
Fast method: X = R l/(100 - l) = 15 x 35/65 = 8.08 ohm.
Sanity check: Units: ohm. The null point is left of centre, so X is smaller than R = 15 ohm, as it should be. If X were 15 ohm the null point would be at 50 cm.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Terminal voltage (discharging) | V = E - I r = E R/(R + r) | cell is delivering current to an external resistance R | V | Example 1 |
| Short-circuit current | I_sc = E/r | external resistance zero (terminals shorted); r constant | A | none |
| Internal resistance from two readings | r = R (E - V)/V | R is the external resistor and V the terminal voltage while it is connected | ohm | Example 3 |
| n identical cells in series | E_eq = n E; r_eq = n r | identical cells in series with same polarity | V (ohm) | Example 2 |
| m identical cells in parallel | E_eq = E; r_eq = r/m | identical cells in parallel with same polarity | V (ohm) | Example 4 |
| Grid of m rows of n cells | I = n E/(R + n r/m) | m identical rows in parallel, each of n cells in series, driving external R | A | none |
| Kirchhoff junction law | sum of currents at a node = 0 | steady currents; no charge builds up at the node | A | Example 6 |
| Kirchhoff loop law | sum of emfs = sum of I R around a loop | closed loop, steady currents; emf sign by direction of travel | V | Example 6 |
| Junction voltage (two-node network) | V = (sum E_k/r_k)/(sum 1/r_k) | two nodes joined by branches each with an emf and a series resistance | V | Example 6 |
| Wheatstone bridge balance | P/Q = R/S | bridge balanced so no current flows in the middle arm | dimensionless | Example 5 |
| Metre bridge | X/R = l/(100 - l) | null point on a uniform wire; X in left gap, R in right gap | ohm (l in cm) | Example 7 |
Common mistakes and speed
- Using the emf as the voltage across the external resistor. Why it tempts: The emf is printed on the cell; the internal drop I r is easy to forget, and an option equal to the emf is common.
- Adding the emfs of cells that are in parallel. Why it tempts: Emfs add in series, and a parallel connection looks similar in the picture; in parallel the emf stays E and only the internal resistance divides.
- Including the middle resistor of a balanced Wheatstone bridge in the series-parallel reduction. Why it tempts: It is drawn in the figure, and every drawn resistor seems to count; at balance it carries no current.
- Writing l/(100 - l) the wrong way round in the metre bridge. Why it tempts: Either ratio looks plausible, but the length on the X side goes with X: X/R = l/(100 - l).
- Getting signs wrong in the loop law when a cell is traversed from its positive to its negative terminal. Why it tempts: Students add every emf; going through a cell from the positive to the negative terminal is a drop, so its sign must be negative.
- Treating the current from a cell as always leaving its positive terminal in a multi-cell circuit. Why it tempts: It is true for a lone cell, but a stronger cell can drive current backwards through a weaker one.
Time per question and fast method
Target: about 110 seconds per question.
Reduce cell groups to one equivalent (E_eq, r_eq) first. For bridges test balance by cross products P S and Q R before doing anything else. For two-node networks use the junction-voltage formula V = (sum E/r)/(sum 1/r) instead of loop equations. For the metre bridge write the ratio l : (100 - l) directly.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 5 correct. Pick an option for each question.
Practice
- Six identical cells, each of emf 2.0 V and internal resistance 1.5 ohm, are connected as two parallel rows,… Verified (T1)
- A cell of emf 9.0 V in series with a 3.0 ohm resistor, and a cell of emf 3.0 V in series with a 6.0 ohm… Verified (T1)
- In a metre bridge the unknown resistance X is in the left gap and a 10 ohm resistor is in the right gap; the… Verified (T1)
- In a bridge ABCD the resistors are AC = 4 ohm, CB = 2 ohm, AD = 8 ohm and DB = 4 ohm, and a 9 ohm resistor is… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Emf, terminal voltage and internal resistance
Emf E is the energy supplied per unit charge by the source, not a force, and equals the terminal voltage on open circuit. For current I leaving the positive terminal, V = E - I r (discharging). The terminal voltage can exceed E only when current is forced backwards through the cell, V = E + I r, as when the cell is being charged by a larger source. Short-circuit current is E/r. For a cell of fixed E and r, the current is I = E/(R + r), terminal voltage V = E R/(R + r), and internal drop I r = E r/(R + r). The same cell in a circuit of large R behaves like an ideal source of emf E (V is close to E). Two readings (E and V at known R) give r = R (E - V)/V. Units: volt, ohm, ampere.
Combinations of cells
Series (n identical cells): E_eq = n E, r_eq = n r. Parallel (m identical cells): E_eq = E, r_eq = r/m. Mixed grid of m parallel rows of n cells: E_eq = n E, r_eq = n r/m, I = n E/(R + n r/m). For a fixed number of cells N = m n, the current is largest when the external resistance equals the equivalent internal resistance, R = n r/m. If R is much larger than the internal resistance, series arrangement gives the largest current; if R is much smaller, the parallel arrangement does. Cells of unequal emf in parallel are solved by Kirchhoff laws or by the junction-voltage formula V = (sum of E_k/r_k)/(sum of 1/r_k) when all branches meet at the same two nodes; a cell with a negative current in that solution is being charged. Check that polarities agree before using the identical-cell formulas.
Kirchhoff laws: method and checks
Junction law (KCL): sum of currents into a node = sum out. Loop law (KVL): sum of emfs = sum of I R round a loop, with signs by direction. Method: label currents on every branch with arbitrary directions, apply KCL to reduce the unknowns, apply KVL to as many independent loops as there are unknowns, solve the equations, and interpret signs. Check by energy: power delivered by cells (E I for each, negative if charged) equals the total I² R. For a network with two nodes, the junction-voltage (node) method needs only one equation. Give each branch its own current symbol. Edge case: if a branch has a wire of zero resistance in parallel with a resistor, the current in the resistor is zero.
Wheatstone bridge: balance and the unbalanced case
Balance condition: P/Q = R/S, with P and Q in one half and R and S in the other, matched in the same order (P with R on the side of the cell, Q with S on the other). At balance the potentials of the galvanometer terminals are equal, the galvanometer reading is zero, and the equivalent resistance is (P + Q)(R + S)/(P + Q + R + S). Interchanging the cell and the galvanometer does not alter the balance condition. If P/Q is not equal to R/S the bridge is unbalanced and the central branch carries current; then use Kirchhoff laws or node equations, and do not use the series-parallel shortcut. Questions often hide a balanced bridge inside a larger network, with a resistor of any value across the middle, which can be ignored. The check for balance is to compare cross products P S and Q R.
Metre bridge: formula, practice points and what is asked
X/R = l/(100 - l), with l measured from the end on the side of X. If X and R are interchanged the balance point changes to 100 - l. If a resistor is joined in parallel with X, the effective resistance falls, and the balance point shifts towards the X end. Questions ask for the unknown resistance from l, for the resistance of a wire from its length and resistivity, for the effect of shunting or of adding a series resistance, or for the shift in balance point. For a wire of uniform cross-section the resistance per unit length is constant, so the lengths themselves give the ratio. End corrections are not needed at this level: use the lengths as given. Keep lengths in the same unit (cm) and check that 0 < l < 100.
Memory hook
Suppose a mobile phone is charged through a small power bank that gets warm when you draw a lot of current from it.
- With nothing connected, the power bank shows its full voltage. That is the emf.
- When the phone draws a large current, part of the voltage is lost inside the power bank, which is the internal drop I r, and the phone sees a lower voltage.
- If you short the output, all the voltage drops inside and the power bank heats, because the whole emf is spent on the internal resistance.
The terminal voltage is the emf minus the drop inside the cell, V = E - I r, and the drop grows with the current you draw.
Open circuit shows E; drawing current costs I r inside the cell.
Revision card
Try to answer each without looking above.
- Write the terminal voltage of a cell delivering current I and give the short-circuit current.
- Give emf and internal resistance of n identical cells in series and of m identical cells in parallel.
- State Kirchhoff junction and loop laws and the conservation law behind each.
- State the balance condition of a Wheatstone bridge and say what to do with the middle branch at balance.
- Write the metre bridge formula and say which end l is measured from.
- How do you find the internal resistance from the open-circuit emf and one loaded reading?
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (see content/reviews/scope-audit-2026-11-20.md)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 3; fixed: 3
- Report: content/reviews/learn2-cur-2026-11-20.md
Textbook references
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 3: Current Electricity, 3.10 CELLS, EMF, INTERNAL RESISTANCE (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 3: Current Electricity, Summary Summary (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 3: Current Electricity, 3.12 KIRCHHOFF'S RULES (read 2026-11-22)
- NCERT Physics Part 1, Class 12 (reprint 2026-27), Chapter 3: Current Electricity, 3.13 WHEATSTONE BRIDGE (read 2026-11-22)
Sources used
- NTA JEE (Main) 2026 syllabus, Physics, Unit 12 (https://jeemain.nta.nic.in/document/syllabus-2026/), read for scope
- Standard results of school-level current electricity; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.