Oxidation Number and Balancing Redox Reactions: JEE Main
Reviewed Last updated 2026-11-20. Syllabus topic: Oxidation number and balancing redox reactions.
In short. Oxidation number is the charge an atom would have if all bonding electrons went to the more electronegative atom. In every redox reaction the total rise in oxidation number equals the total fall; balancing uses that equality, then charge, hydrogen and oxygen.
- Rules: element = 0; simple ion = its charge; H is +1 (-1 in metal hydrides); O is -2 (-1 in peroxides, -1/2 in superoxides, +2 in OF2); sum = charge of the species.
- The oxidation number can be fractional as an average (S in Na2S4O6 is +2.5) and the maximum is the old group number (1-8 scheme, equal to the valence electrons; Cl +7, S +6), with the minimum equal to that number minus 8.
- n-factor = electrons lost or gained per formula unit; equal n-factor x moles on both sides gives the reaction ratio and titration answers.
- Disproportionation: the same element is both oxidised and reduced (Cl2 in alkali, H2O2).
- Ion-electron method: write half-reactions, balance atoms, add H2O and H+ (acid) or OH- (base), equalise electrons, add.
Syllabus line: REDOX REACTIONS AND ELECTROCHEMISTRY Electronic concepts of oxidation and reduction, redox reactions, oxidation number, rules for assigning oxidation number and balancing of redox reactions. Electrolytic and metallic conduction, conductance in electrolytic solutions, molar conductivities and their variation with concentration, Kohlrausch's law and its applications. Electrochemical cells - Electrolytic and Galvanic cells, different types of electrodes, electrode potentials including standard electrode potential, half-cell and cell reactions, emf of a Galvanic cell and its measurement, Nernst equation and its applications, relationship between cell potential and Gibbs' energy change, dry cell and lead accumulator, fuel cells. (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 7 (https://jeemain.nta.nic.in/document/syllabus-2026/); this lesson covers the first sentence.)
Before you start
Prerequisites
- Chemical equations and stoichiometry: Balancing and mole ratios are used in every titration example. Read this first if mole-to-mole calculations are shaky.
- Covalent bonding, VSEPR, hybridisation and resonance: Electronegativity decides who gets the shared electrons. Read this first if you cannot compare electronegativities.
Related topics
The concept step by step
Step 1: Oxidation and reduction as electron loss and gain
In the electronic concept, oxidation is loss of electrons and reduction is gain of electrons, and they always occur together. In Zn + Cu2+ giving Zn2+ + Cu, zinc loses two electrons (oxidised, it is the reducing agent) and Cu2+ gains two (reduced, it is the oxidising agent). The oxidising agent is the species reduced; the reducing agent is the species oxidised.
Step 2: Oxidation number and the rules to assign it
Oxidation number is the charge an atom would carry if the shared electrons in each bond were given to the more electronegative atom. An atom in its elemental form is 0, a monatomic ion has its own charge, hydrogen is +1 (but -1 in NaH), oxygen is -2 (but -1 in H2O2, -1/2 in KO2, +2 in OF2), fluorine is always -1, and the oxidation numbers in a neutral species add to 0 and in an ion add to its charge.
Step 3: Find unknowns by the sum rule, including averages
To find one unknown, write the sum equal to the charge. For K2Cr2O7: 2(+1) + 2x + 7(-2) = 0, so x = +6. When a compound has atoms of the same element in different environments (the two sulphur atoms in thiosulphate, Fe in Fe3O4), the sum rule gives only the average, which may be a fraction. Do not assume that a fractional value means a fractional charge on any atom.
Step 4: Disproportionation and n-factor
In a disproportionation, one element in an intermediate oxidation state is simultaneously oxidised and reduced, as chlorine is in cold alkali: Cl2 giving Cl- (0 to -1) and ClO- (0 to +1). The n-factor of a species in a reaction is the number of electrons lost or gained per formula unit, so KMnO4 has n = 5 (to Mn2+ in acid) but n = 3 (to MnO2 in neutral or basic solution). The n-factor depends on the product formed.
Step 5: Balancing by the oxidation-number method
Write the skeleton equation, mark the elements whose oxidation number changes, find the total rise and total fall per formula unit, and multiply so the two totals are equal. Then balance the remaining atoms. This method is fast when the species are given as whole formulas and the medium is not specified.
Step 6: Balancing by the ion-electron method
Split into two half-reactions. In each, balance the atoms other than H and O, then O with H2O, then H with H+ (in acid). For basic medium, add OH- equal to the H+ on both sides and cancel water. Balance the charge with electrons, multiply the half-reactions so the electrons match, add them and cancel. Finally check atoms and charge.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
Find the oxidation number of chromium in K2Cr2O7.
| Step | Marks |
|---|---|
| K is +1 (two of them) and O is -2 (seven of them); the compound is neutral. | 1 |
| 2(+1) + 2x + 7(-2) = 0. | 1 |
| 2x = 14 - 2 = 12, so Cr = +6. | 1 |
| Total: 3 marks | 3 |
Answer: +6
Fast method: Negative total 14, minus the positive 2 from K, shared by two Cr: 12/2.
Sanity check: +6 is Cr in its maximum oxidation state (group 6), so K2Cr2O7 can only act as an oxidising agent, as it does.
Example 2 (easy)
Find the average oxidation number of sulphur in sodium tetrathionate, Na2S4O6.
| Step | Marks |
|---|---|
| Na is +1 (two) and O is -2 (six): 2(+1) + 4x + 6(-2) = 0. | 2 |
| 4x = 12 - 2 = 10, so average S = +2.5. | 1 |
| Total: 3 marks | 3 |
Answer: +2.5 (average)
Fast method: (12 - 2)/4.
Sanity check: The average lies between 0 and +5, the actual values in the structure (two S at 0, two at +5): (0 + 0 + 5 + 5)/4 = 2.5.
Example 3 (medium)
25.0 mL of 0.120 mol L⁻1 FeSO4 solution is titrated in acid with 0.0500 mol L⁻1 K2Cr2O7. Find the volume of K2Cr2O7 needed at the end point, in mL.
| Step | Marks |
|---|---|
| n-factor of Fe2+ = 1; n-factor of Cr2O7(2-) = 6 (two Cr, +6 to +3). | 2 |
| Amount of Fe2+ = 25.0 x 0.120 = 3.00 mmol, so electrons given = 3.00 mmol. | 1 |
| Moles dichromate x 6 = 3.00, so dichromate = 0.500 mmol. | 1 |
| Volume = 0.500 mmol / 0.0500 mmol mL⁻1 = 10.0 mL. | 1 |
| Total: 5 marks | 5 |
Answer: 10.0 mL
Fast method: Milliequivalents: 25 x 0.120 x 1 = V x 0.0500 x 6, so V = 3/0.3 = 10 mL.
Sanity check: Dichromate is six times as effective per mole and its solution is about 2.4 times more dilute, so the volume is 25/(6 x 0.0500/0.120) = 10 mL, smaller than 25 mL as expected.
Example 4 (medium)
In hot concentrated NaOH, chlorine disproportionates to Cl- and ClO3-. What fraction of the chlorine atoms is oxidised?
| Step | Marks |
|---|---|
| Oxidation: Cl (0) to ClO3- (+5), each atom loses 5 electrons. Reduction: Cl (0) to Cl- (-1), each atom gains 1 electron. | 2 |
| Let x atoms be oxidised. Electrons lost = 5x equals the number of atoms reduced y. | 1 |
| y = 5x, so the fraction oxidised = x/(x + y) = 1/6 = 0.167. | 2 |
| Total: 5 marks | 5 |
Answer: 1/6 (about 0.167)
Fast method: One ClO3- needs five Cl- to take its 5 electrons: 1 oxidised out of 1 + 5 = 6.
Sanity check: Check with the balanced equation: 3Cl2 is 6 atoms, 1 goes to ClO3- and 5 to Cl-, which is 1 in 6.
Example 5 (hard, multi-step)
Balance, in basic medium, Cr(OH)3 + ClO3- giving CrO4(2-) + Cl- (with OH- and H2O as needed) and find the sum of all coefficients on both sides.
| Step | Marks |
|---|---|
| Cr: +3 to +6 loses 3 electrons; Cl: +5 to -1 gains 6 electrons. Ratio Cr : ClO3- = 2 : 1. | 2 |
| 2Cr(OH)3 + ClO3- giving 2CrO4(2-) + Cl-. Charge: right is -5, left is -1, so add 4OH- on the left. | 2 |
| Hydrogen: left 6 + 4 = 10, so 5H2O on the right. Oxygen check: left 6 + 3 + 4 = 13, right 8 + 5 = 13. | 2 |
| 2Cr(OH)3 + ClO3- + 4OH- giving 2CrO4(2-) + Cl- + 5H2O; sum of coefficients = 2 + 1 + 4 + 2 + 1 + 5 = 15. | 1 |
| Total: 7 marks | 7 |
Answer: 15
Fast method: Electron ratio fixes 2 : 1; charge then gives OH-, hydrogen gives water, and oxygen is the check.
Sanity check: Oxygen balances (13 on each side) and charge balances (-5 on each side).
Example 6 (hard)
0.126 g of oxalic acid dihydrate, H2C2O4.2H2O (molar mass 126 g mol⁻1), requires 20.0 mL of acidified KMnO4 solution at the end point. Find the molarity of the KMnO4 solution.
| Step | Marks |
|---|---|
| Amount of oxalic acid = 0.126/126 = 1.00 x 10⁻3 mol. | 1 |
| n-factor: oxalic acid 2 (two C, +3 to +4); KMnO4 5 (+7 to +2). | 2 |
| Electrons: moles KMnO4 x 5 = 1.00 x 10⁻3 x 2, so KMnO4 = 4.00 x 10⁻4 mol. | 2 |
| Molarity = 4.00 x 10⁻4 mol / 0.0200 L = 0.0200 mol L⁻1. | 1 |
| Total: 6 marks | 6 |
Answer: 0.0200 mol L⁻1
Fast method: mmol x n-factor on each side: 1 x 2 = V x M x 5, so M = 2/(20 x 5) = 0.02.
Sanity check: The balanced equation is 2MnO4- + 5H2C2O4, i.e. 2/5 mol of permanganate per mole of acid: 0.4 x 1.00 x 10⁻3 = 4.0 x 10⁻4 mol, consistent.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Sum rule | sum of oxidation numbers = charge on the species | neutral species or ion; use known O and H numbers | dimensionless | Example 1 |
| Exceptions for O | O is -1 in peroxides, -1/2 in superoxides, +2 in OF2 | not applicable | dimensionless | none |
| Exceptions for H | H is -1 in metal hydrides (NaH, CaH2) | not applicable | dimensionless | none |
| n-factor | electrons lost or gained per formula unit = change in oxidation number x atoms changed | per formula unit, for the given reaction and medium | electrons | Example 3 |
| Titration at end point | n-factor1 x mol1 = n-factor2 x mol2 (or N1V1 = N2V2) | complete reaction at end point; n-factors for that reaction | mol or mmol | Example 3 |
| KMnO4 n-factor | 5 in acid (Mn2+), 3 in neutral or weak base (MnO2), 1 in strong base (MnO4 2-) | not applicable | electrons | Example 6 |
| Dichromate n-factor | 6 per Cr2O7(2-) (to Cr3+) | acidic medium, Cr2O7 2- reduced to Cr3+ | electrons | Example 3 |
| Basic medium balancing | balance as in acid, add OH- equal to H+ both sides, cancel water | not applicable | not applicable | Example 5 |
Common mistakes and speed
- Taking oxygen as -2 in peroxides and superoxides (for example getting +7 for S in H2S2O8). Why it tempts: Oxygen is -2 in almost every compound, so the rule is applied by habit before the formula is looked at.
- Using n = 5 for permanganate in every medium. Why it tempts: The acidic reaction giving Mn2+ is the one practised most, so 5 is remembered as a property of KMnO4 instead of the reaction.
- Forgetting the second site of oxidation, for example counting only Fe in FeC2O4 or only one Cr in K2Cr2O7. Why it tempts: The n-factor is quoted per atom in the half-reaction, and the number of atoms per formula unit is easy to miss.
- Thinking a fractional average oxidation number means a fractional charge, or that an average of +2.5 is the true value on each sulphur. Why it tempts: The sum rule returns a single number and it is natural to attach it to every atom of that element.
- Balancing charge before electrons, or leaving H+ in a basic-medium equation. Why it tempts: Acid medium is the default in most worked examples and the OH- step is skipped.
Time per question and fast method
Target: about 75 seconds per question.
For an oxidation number, apply the sum rule at once and check for a peroxide or a hydride. For titrations and mole ratios use n-factor: moles x n-factor of oxidant = moles x n-factor of reductant. For balancing, fix the ratio by electrons, then charge, then H, and verify with oxygen.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 6 correct. Pick an option for each question.
Practice
- Peroxodisulphuric acid, H2S2O8, contains one peroxide (O-O) linkage and no other oxygen-oxygen bond. The… Verified (T1)
- The mixed oxide Fe3O4 is a neutral compound with oxygen at -2. The average oxidation number of iron in it is Verified (T1)
- In acidic medium, permanganate (MnO4-) is reduced to Mn2+, and iron(II) oxalate, FeC2O4, is oxidised to Fe3+… Verified (T1)
- In a neutral or weakly basic solution, permanganate is reduced to MnO2 and iodide is oxidised to iodate,… Verified (T1)
- Arsenic(III) sulphide is oxidised by nitrate in acidic solution: As2S3 + NO3- + H+ + H2O giving H3AsO4 +… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Rules for oxidation number, exceptions and limits
Order of priority: fluorine is -1 in all compounds; alkali metals are +1 and alkaline earth metals +2; hydrogen is +1 with non-metals and -1 with metals; oxygen is -2 except in peroxides (-1), superoxides (-1/2), ozonides (-1/3) and OF2 (+2). The remaining atom takes the value that makes the sum equal to the charge. The maximum possible oxidation number of a main-group element is its valence-electron count, the old 1-8 group number (Cl +7 in ClO4-; S +6; in the 1-18 numbering, group 17 and 16 minus 10), the minimum is that number minus 8 (Cl -1), and a species with the element at its maximum can act only as an oxidising agent, at its minimum only as a reducing agent, and in between as either. Oxidation number is a bookkeeping device and is not the same as covalency, which is the number of bonds; in H2O2 oxygen has oxidation number -1 and covalency 2.
Average oxidation number and structural oxidation numbers
If a molecule contains the same element in two environments, the sum rule gives the average. In Na2S4O6 (tetrathionate), S is +2.5 on average, but the structure has two central sulphur atoms at 0 and two outer ones at +5. In Na2S2O3, the average of +2 hides S at +6 and S at -2. In Fe3O4 (FeO.Fe2O3) iron is +2 and +3 with average 8/3. In H2S2O8 the peroxide linkage means two oxygens at -1 and sulphur at +6, and the trap of assuming all O at -2 gives +7, which is wrong because sulphur cannot exceed +6 (its six valence electrons). When a question gives a structure, use it; when it gives only a formula, an average is what the examiner expects.
Types of redox reaction, n-factor and equivalents
Redox reactions are combination (C + O2), decomposition (2KClO3), displacement (Zn + CuSO4) and disproportionation (2H2O2 giving 2H2O + O2, and Cl2 with cold dilute NaOH giving NaCl and NaClO, with hot concentrated NaOH giving NaCl and NaClO3). The n-factor is the total change in oxidation number per formula unit. Useful values: KMnO4 is 5 in acid, 3 in neutral or alkaline solution, 1 in strongly alkaline solution (to MnO4 2-); K2Cr2O7 is 6 (two Cr atoms, 3 each); FeC2O4 is 3 (1 for Fe and 2 for oxalate); H2C2O4 is 2; Fe2+ is 1; H2O2 is 2 either as oxidising or reducing agent. Moles x n-factor of the oxidant equals moles x n-factor of the reductant at the end point, which is the basis of redox titrations.
Balancing in acidic and basic medium, and what examiners test
The oxidation-number method fixes the main ratio quickly; the ion-electron method is needed when H+, OH- and H2O must appear. In acid: balance O with H2O, then H with H+. In base: do the acid procedure, then add to both sides as many OH- as there are H+, combine H+ and OH- into H2O and cancel. Examiners test: oxidation number of an element in a compound or ion (often an average or with a peroxide), counting the oxidising and reducing agents, the n-factor and moles reacting, coefficients or the sum of coefficients of a balanced equation, the medium-dependent product of MnO4-, and identifying disproportionation. Check each balanced equation by charge and one atom, usually oxygen, as in the final answer line.
Memory hook
Suppose you and a friend share a pack of cricket cards and settle every swap by giving away exactly as many cards as you take in.
- If you give 3 cards and the friend gives 3 back, the totals are unchanged; if you try to swap 3 for 2, someone has to make up the difference. That is why electrons lost must equal electrons gained.
- If one friend holds a rare card (an element in an unusual oxidation state), the number written on the tally sheet records the swaps, not a card he is physically holding: oxidation number is bookkeeping of electrons, not a real charge on the atom.
- A friend who gives some cards away and takes others in from the same pile is doing disproportionation.
Redox is a card swap: the electron count lost always equals the count gained, and oxidation number is the tally sheet kept for each atom.
Electrons lost equal electrons gained; the oxidation number is the tally.
Revision card
Try to answer each without looking above.
- State the rules for oxidation number of O and H and their exceptions.
- How do you find an average oxidation number, and what does it hide in Na2S4O6?
- What is the n-factor of KMnO4 in acidic, neutral and strongly basic solution?
- Define disproportionation and name two examples.
- What are the steps of the ion-electron method in basic medium?
- Write the end-point relation for a redox titration in terms of n-factors.
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 3; fixed: 3
- Report: content/reviews/learn4-red-2026-11-20.md
Textbook references
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 7: Redox Reactions, 7.3 OXIDATION NUMBER (read 2026-11-22)
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 7: Redox Reactions, 7.3.2 Balancing of Redox Reactions (read 2026-11-22)
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 7: Redox Reactions, 7.2 REDOX REACTIONS IN TERMS OF ELECTRON TRANSFER REACTIONS (read 2026-11-22)
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 7: Redox Reactions, 7.3.1 Types of Redox Reactions (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 7, text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
- NCERT Class 11 Chemistry, Redox Reactions chapter: named as the scope reference only; not opened for this draft, so textbook section references are pending. Content written fresh.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.