EngineeringRise

Conductance and Kohlrausch Law: JEE Main Notes

Reviewed Last updated 2026-11-20. Syllabus topic: Conductance and Kohlrausch law.

In short. Electrolytic conduction is by ions. Conductivity kappa = (cell constant)/R; molar conductivity Lambda_m = 1000 kappa / c. Lambda_m rises as concentration falls; Kohlrausch's law gives the limiting value as the sum of ionic limiting conductivities.

  • kappa = G* x (1/R), with cell constant G* = l/A in cm⁻1; unit of kappa is S cm⁻1.
  • Lambda_m = kappa x 1000 / c (c in mol L⁻1) in S cm² mol⁻1; on dilution kappa falls but Lambda_m rises.
  • Strong electrolyte: Lambda_m = Lambda0 - A sqrt(c) (Debye-Huckel-Onsager form); weak electrolyte: Lambda_m rises steeply at low concentration because the degree of dissociation increases.
  • Kohlrausch's law: Lambda0 = nu+ lambda0(+) + nu- lambda0(-).
  • Weak electrolyte: alpha = Lambda_m / Lambda0 and Ka = c alpha² / (1 - alpha).

Syllabus line: REDOX REACTIONS AND ELECTROCHEMISTRY Electronic concepts of oxidation and reduction, redox reactions, oxidation number, rules for assigning oxidation number and balancing of redox reactions. Electrolytic and metallic conduction, conductance in electrolytic solutions, molar conductivities and their variation with concentration, Kohlrausch's law and its applications. Electrochemical cells - Electrolytic and Galvanic cells, different types of electrodes, electrode potentials including standard electrode potential, half-cell and cell reactions, emf of a Galvanic cell and its measurement, Nernst equation and its applications, relationship between cell potential and Gibbs' energy change, dry cell and lead accumulator, fuel cells. (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 7 (https://jeemain.nta.nic.in/document/syllabus-2026/); this lesson covers the second sentence.)

Before you start

Prerequisites

Related topics

The concept step by step

  1. Step 1: Metallic and electrolytic conduction

    A metal conducts by free electrons, and its conductivity falls as temperature rises because lattice vibrations scatter the electrons. An electrolyte conducts by movement of ions; no matter is carried in a metal, but electrolytic conduction involves chemical change at the electrodes. As temperature rises the viscosity falls and ions move faster, so the conductivity of an electrolyte increases with temperature.

  2. Step 2: Resistance, conductance, conductivity and cell constant

    Resistance R = rho l/A, where rho is the resistivity. Conductance G = 1/R in siemens (S, ohm⁻1), and conductivity kappa = 1/rho in S cm⁻1 (or S m⁻1). So kappa = G x (l/A), and l/A is the cell constant G* of the conductivity cell in cm⁻1. The cell constant is found by filling the cell with a solution of known conductivity and measuring R; then kappa of any other solution is G*/R.

  3. Step 3: Molar conductivity

    Molar conductivity Lambda_m is the conductivity of the solution that contains one mole of electrolyte placed between two electrodes one centimetre apart and large enough to hold all of it. For concentration c in mol L⁻1, the volume containing one mole is 1000/c cm³, so Lambda_m = kappa x 1000/c with unit S cm² mol⁻1. In SI the units are S m² mol⁻1, with 1 S m² mol⁻1 = 10⁴ S cm² mol⁻1.

  4. Step 4: Variation with concentration

    On dilution, kappa falls because fewer ions are present per unit volume, but Lambda_m rises because, per mole of electrolyte, more ions are free to carry current (a weak electrolyte dissociates more) and the ions move faster as interionic attraction falls (a strong electrolyte); NCERT states the same fact as the volume holding one mole growing by more than kappa falls (Lambda_m = kappa x 1000/c), and the two reasons above are why that happens. For a strong electrolyte the rise is small and gradual because the interionic attraction decreases, and Lambda_m is linear in the square root of c: Lambda_m = Lambda0 - A sqrt(c). For a weak electrolyte Lambda_m is small at high concentration and rises very steeply on dilution, because the degree of dissociation rises toward 1, so Lambda0 cannot be found by extrapolation.

  5. Step 5: Kohlrausch's law of independent migration

    At infinite dilution each ion moves independently, so the limiting molar conductivity is the sum of the contributions of the cation and the anion: Lambda0 = nu+ lambda0(+) + nu- lambda0(-), where nu are the numbers of cations and anions per formula unit. For CaCl2 this is lambda0(Ca2+) + 2 lambda0(Cl-). Kohlrausch's law gives Lambda0 for weak electrolytes from strong ones, for example CH3COOH = HCl + CH3COONa - NaCl.

  6. Step 6: Applications of Kohlrausch's law

    Applications are: (1) the limiting molar conductivity of a weak electrolyte; (2) the degree of dissociation alpha = Lambda_m / Lambda0 and then Ka = c alpha² / (1 - alpha); (3) the solubility of a sparingly soluble salt, taking the saturated solution as so dilute that Lambda_m is nearly Lambda0, so that solubility = 1000 kappa / Lambda0 in mol L⁻1 after subtracting the conductivity of the water used.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

A cell filled with a solution of conductivity 2.00 x 10⁻3 S cm⁻1 has a resistance of 150 ohm. Find the cell constant.

Marks-style solution of example 1
StepMarks
kappa = G*/R, so G* = kappa x R.1
G* = 2.00 x 10⁻3 S cm⁻1 x 150 ohm.1
G* = 0.300 cm⁻1.1
Total: 3 marks3

Answer: 0.300 cm⁻1

Fast method: Multiply conductivity by resistance: 2 x 10⁻3 x 150 = 0.3.

Sanity check: Units: S cm⁻1 x ohm = cm⁻1, which is the unit of l/A.

Example 2 (easy)

A conductivity cell of cell constant 0.80 cm⁻1 shows a resistance of 2000 ohm for an electrolyte solution. Find its conductivity.

Marks-style solution of example 2
StepMarks
kappa = G*/R.1
kappa = 0.80 cm⁻1 / 2000 ohm.1
kappa = 4.0 x 10⁻4 S cm⁻1.1
Total: 3 marks3

Answer: 4.0 x 10⁻4 S cm⁻1

Fast method: 0.8/2000 = 0.4/1000.

Sanity check: A dilute solution of an electrolyte has kappa of the order of 10⁻4 to 10⁻2 S cm⁻1; 4.0 x 10⁻4 is in that range.

Example 3 (medium)

A 0.0100 mol L⁻1 solution has a conductivity of 1.80 x 10⁻4 S cm⁻1. Find its molar conductivity in S cm² mol⁻1.

Marks-style solution of example 3
StepMarks
Lambda_m = 1000 kappa / c with c in mol L⁻1.1
= 1000 x 1.80 x 10⁻4 / 0.0100.2
= 0.180 / 0.0100 = 18.0 S cm² mol⁻1.1
Total: 4 marks4

Answer: 18.0 S cm² mol⁻1

Fast method: Move the decimal: kappa x 1000 = 0.18; divide by 0.01.

Sanity check: Dimensional: S cm⁻1 x cm³ L⁻1 / (mol L⁻1) = S cm² mol⁻1, and the value of about 18 is typical of a weak electrolyte at 0.01 mol L⁻1.

Example 4 (medium)

Given lambda0(Ca2+) = 119 S cm² mol⁻1 and lambda0(Cl-) = 76 S cm² mol⁻1, find Lambda0 for CaCl2.

Marks-style solution of example 4
StepMarks
CaCl2 gives one Ca2+ and two Cl-: nu+ = 1, nu- = 2.1
Lambda0 = 1 x 119 + 2 x 76.2
Lambda0 = 119 + 152 = 271 S cm² mol⁻1.1
Total: 4 marks4

Answer: 271 S cm² mol⁻1

Fast method: Count ions in the formula and multiply each by its value.

Sanity check: A salt with two chloride ions must have more than twice lambda0(Cl-) = 152; 271 is greater, as expected.

Typical trap: Writing Lambda0(CaCl2) = lambda0(Ca2+) + lambda0(Cl-) = 195 and missing the two chloride ions in the formula unit; the sum has to follow the formula, 119 + 2 x 76 = 271.

Example 5 (hard, multi-step)

A weak monobasic acid at 0.0100 mol L⁻1 has a molar conductivity of 16.0 S cm² mol⁻1, and its limiting molar conductivity is 400 S cm² mol⁻1. Find the degree of dissociation and Ka.

Marks-style solution of example 5
StepMarks
alpha = Lambda_m / Lambda0 = 16.0/400 = 0.0400.2
Ka = c alpha² / (1 - alpha).1
Ka = 0.0100 x (0.0400)² / 0.9600.2
Ka = 1.6 x 10⁻5 / 0.96 = 1.67 x 10⁻5 mol L⁻1.1
Total: 6 marks6

Answer: alpha = 0.0400; Ka = 1.67 x 10⁻5 mol L⁻1

Fast method: c alpha² = 0.01 x 1.6 x 10⁻3 = 1.6 x 10⁻5; correct by 1/0.96 only if the options are close together.

Sanity check: [H+] = c alpha = 4.0 x 10⁻4 mol L⁻1, pH about 3.4, reasonable for a weak acid of Ka near 10⁻5 at 0.01 mol L⁻1.

Example 6 (hard)

For a weak electrolyte, Lambda_m is 5.0 S cm² mol⁻1 at 0.10 mol L⁻1 and 15.0 S cm² mol⁻1 at 0.010 mol L⁻1. Find the ratio of the conductivity at 0.010 mol L⁻1 to that at 0.10 mol L⁻1.

Marks-style solution of example 6
StepMarks
kappa = Lambda_m c / 1000.1
kappa(0.10) = 5.0 x 0.10 / 1000 = 5.0 x 10⁻4 S cm⁻1.2
kappa(0.010) = 15.0 x 0.010 / 1000 = 1.5 x 10⁻4 S cm⁻1.1
Ratio = 1.5 x 10⁻4 / 5.0 x 10⁻4 = 0.30.1
Total: 5 marks5

Answer: 0.30 (conductivity falls although molar conductivity rises)

Fast method: Ratio = (15 x 0.010)/(5.0 x 0.10) = 0.15/0.5.

Sanity check: The concentration fell 10-fold and Lambda_m rose 3-fold, so kappa must fall to 3/10 = 0.30.

Formulas and units

Formula and unit box for Conductance and Kohlrausch law
ResultFormulaValid whenUnits or noteWorked example
ConductanceG = 1/Rany conductor at fixed temperatureS (ohm⁻1)none
Conductivitykappa = G* / R = G* x G, with G* = l/Auniform cell; measured with alternating currentS cm⁻1 (1 S cm⁻1 = 100 S m⁻1)Example 1
Cell constantG* = kappa x Rsame cell and solution; conductivity in S cm⁻1cm⁻1Example 1
Molar conductivityLambda_m = 1000 kappa / c (c in mol L⁻1)c in mol L⁻1; kappa in S cm⁻1S cm² mol⁻1 (1 S m² mol⁻1 = 10⁴ S cm² mol⁻1)Example 3
Strong electrolyteLambda_m = Lambda0 - A sqrt(c)strong electrolyte, dilute solutionS cm² mol⁻1none
Kohlrausch's lawLambda0 = nu+ lambda0(+) + nu- lambda0(-)at infinite dilution, ions move independentlyS cm² mol⁻1Example 4
Degree of dissociationalpha = Lambda_m / Lambda0weak electrolyte, dilute solutiondimensionlessExample 5
Ka of weak acidKa = c alpha² / (1 - alpha)weak monobasic acid, 1:1 electrolyte, dilutemol L⁻1Example 5
Sparingly soluble saltS = 1000 kappa(salt) / Lambda0Saturated solution of a sparingly soluble salt; Lambda_m taken as Lambda0 (infinite dilution); kappa(water) subtractedmol L⁻1none

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Leaving out the factor 1000 in Lambda_m = 1000 kappa / c. Why it tempts: The formula looks complete as kappa/c; the 1000 comes from converting litres to cm³, which is easy to overlook when c is given in mol L⁻1.
  • Saying that both kappa and Lambda_m fall on dilution. Why it tempts: Fewer ions per unit volume is obvious, and the idea that conductivity must fall is carried over to molar conductivity without the change of per-mole basis.
  • Forgetting the number of ions in the formula when adding ionic conductivities (CaCl2, Al2(SO4)3). Why it tempts: Tables list the value per ion and the sum is written ion by ion, with the stoichiometry dropped.
  • Finding Lambda0 of a weak electrolyte by extrapolating Lambda_m against sqrt(c). Why it tempts: The straight line works for strong electrolytes, and the same plot is assumed to work for all.
  • Using direct current for conductivity measurement. Why it tempts: Resistance is normally measured with a battery, so direct current is taken as the default; AC avoids electrolysis at the electrodes.

Time per question and fast method

Target: about 90 seconds per question.

kappa = cell constant / R, Lambda_m = 1000 kappa / c, and for Kohlrausch write each salt as its ions and cancel. For weak electrolytes find alpha = Lambda_m / Lambda0 first and then Ka = c alpha² / (1 - alpha), using the approximation only when alpha is under 5 percent and the options are well apart.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. A cell of resistance 400 ohm contains a solution with kappa = 1.0 x 10⁻3 S cm⁻1. The cell constant in cm⁻1 is
Show the answer

Answer: B: 0.40. G* = kappa x R = 1.0 x 10⁻3 x 400 = 0.40 cm⁻1.

Question 2. With lambda0(Na+) = 50 and lambda0(SO4 2-) = 160 S cm² mol⁻1, Lambda0 of Na2SO4 in S cm² mol⁻1 is
Show the answer

Answer: C: 260. Two Na+ and one sulphate: 2 x 50 + 160 = 260.

Question 3. A weak acid has Lambda_m = 8.0 and Lambda0 = 400 S cm² mol⁻1. Its degree of dissociation is
Show the answer

Answer: A: 0.02. alpha = 8.0/400 = 0.020.

Question 4. On diluting a solution of a weak electrolyte, which pair of changes is correct?
Show the answer

Answer: D: kappa decreases, Lambda_m increases. Fewer ions per unit volume lower kappa; Lambda_m is per mole, so it rises because a weak electrolyte dissociates more (and, for a strong one, because interionic attraction falls), not because of volume alone.

Question 5. Alternating current is used for measuring the resistance of an electrolyte because it
Show the answer

Answer: A: avoids electrolysis at the electrodes. Direct current would cause chemical change at the electrodes and alter the concentration; AC reverses and prevents this.

Question 6. The conductivity kappa of 0.020 mol L⁻1 solution is 4.0 x 10⁻4 S cm⁻1. Lambda_m in S cm² mol⁻1 is
Show the answer

Answer: B: 20. Lambda_m = 1000 x 4.0 x 10⁻4 / 0.020 = 20.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Conductivity, units and the measurement

Conductance G = 1/R has the unit siemens (S = ohm⁻1). Conductivity kappa = G x G*, with G* = l/A in cm⁻1, has the unit S cm⁻1 (1 S cm⁻1 = 100 S m⁻1). The conductivity of a solution is measured with a cell of platinised platinum electrodes using alternating current (AC) in a Wheatstone-type bridge, because direct current would cause electrolysis at the electrodes and change the concentration near them. Unless the question says otherwise, convert to consistent units first (cm and cm³, or m and m³), and remember that molarity is in mol L⁻1 but conductivity uses cm³, hence the factor 1000. Factors that affect the conductivity are the nature of the electrolyte, the concentration, the solvent and the temperature.

Molar conductivity against concentration

Lambda_m = 1000 kappa / c. For strong electrolytes such as KCl and HCl, the experimental relation Lambda_m = Lambda0 - A sqrt(c) holds at low concentration; the intercept is Lambda0 and the slope depends on the charge types of the ions. For weak electrolytes, Lambda_m increases much more at low concentration, since alpha = Lambda_m / Lambda0 approaches 1 on dilution. The conductivity kappa of a solution always falls on dilution while Lambda_m rises, and an assertion that confuses the two is a common trap. The equivalent conductivity Lambda_eq, kappa x 1000 / N, is not named in the syllabus line; molar conductivity is what is asked, and the formula for it is enough for all derivations here.

Kohlrausch's law and ionic mobility

At infinite dilution Lambda0 = nu+ lambda0(+) + nu- lambda0(-), the lambda0 being molar ionic conductivities per mole of the ion. H+ and OH- have unusually high values (about 350 and 199 S cm² mol⁻1 at 298 K) because of proton hopping through the hydrogen-bonded network, while most other ions lie between 40 and 80. When ionic conductivities are given per mole of ion with charge, take care with the multiplier: for Al2(SO4)3 the sum is 2 lambda0(Al3+) + 3 lambda0(SO4 2-) per mole of the salt. The law also shows that the difference of Lambda0 for two salts with the same anion equals the difference of the cation values, so that Lambda0(KCl) - Lambda0(NaCl) = lambda0(K+) - lambda0(Na+), which can be checked in tables.

Weak electrolytes, solubility and what examiners test

For a weak electrolyte: alpha = Lambda_m / Lambda0 (valid when ionic mobilities are the same at the concentration of the solution as at infinite dilution, which is the assumption the textbooks make) and Ka = c alpha²/(1 - alpha), which is c alpha² for small alpha. For a sparingly soluble salt, kappa(salt) = kappa(solution) - kappa(water), solubility S (mol L⁻1) = 1000 kappa(salt)/Lambda0 and Ksp follows from S. Examiners test: cell constant and kappa from R, Lambda_m from kappa and c (and the missing factor 1000), Lambda0 from Kohlrausch with several salts, alpha and Ka or pH of a weak acid, the shape of Lambda_m against sqrt(c) for strong and weak electrolytes, and conceptual statements on the effect of dilution and temperature on kappa and Lambda_m.

Memory hook

Suppose a school hall holds a fixed number of students who all walk out to a playground; the number of students per square metre in the playground falls as the ground is made larger.

  1. With a small ground the crowd is dense and each student is obstructed by others; a bigger ground lets them move freely, so the movement per student rises. That is molar conductivity rising on dilution.
  2. The total number of students per square metre (the density) falls on a bigger ground, like kappa, the conductivity per unit volume, which falls on dilution.
  3. A weak electrolyte is a class where only a few students come out of the hall at first: the more room, the more leave, so the crowd of movers itself grows.

Dilution reduces ions per unit volume (kappa falls) but each mole of electrolyte conducts better (Lambda_m rises), strongly so for weak electrolytes that ionise more.

Dilution: conductivity falls, molar conductivity rises.

Revision card

Try to answer each without looking above.

  1. Define cell constant and state how conductivity is calculated from it.
  2. Write the formula for molar conductivity and its unit.
  3. How do kappa and Lambda_m change on dilution, and why?
  4. State Kohlrausch's law and one use of it for a weak electrolyte.
  5. Give the formulas for the degree of dissociation and Ka from conductance data.
  6. Why is alternating current used in measuring conductivity?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 2; fixed: 2
  • Report: content/reviews/learn4-red-2026-11-20.md

Textbook references

  • NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 2: Electrochemistry, 2.4 Conductance of Electrolytic Solutions (read 2026-11-22)
  • NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 2: Electrochemistry, 2.4.1 Measurement of the Conductivity of Ionic Solutions (read 2026-11-22)
  • NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 2: Electrochemistry, 2.4.2 Variation of Conductivity and Molar Conductivity with Concentration (read 2026-11-22)
  • NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 2: Electrochemistry, Example 2.7 Applications of Kohlrausch law (read 2026-11-22)
  • NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 2: Electrochemistry, Example 2.9 Applications of Kohlrausch law (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 7, text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
  • NCERT Class 12 Chemistry, Electrochemistry chapter: named as the scope reference only; not opened for this draft, so textbook section references are pending. Ionic conductivity values in examples are chosen for the problems and are not quoted from a table. Content written fresh.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.