Electrochemical Cells, Nernst Equation, Gibbs Energy: JEE
Reviewed Last updated 2026-11-20. Syllabus topic: Electrochemical cells, Nernst equation and Gibbs energy.
In short. A galvanic cell turns a spontaneous redox reaction into electrical work: E cell = E(cathode) - E(anode), delta G = -nFE and E = E0 - (0.059/n) log Q at 298 K. At equilibrium E = 0 and log K = nE0/0.059.
- Galvanic cell: anode (oxidation, negative), cathode (reduction, positive), salt bridge; electrolytic cell: external source, anode positive, cathode negative.
- Electrode potentials are intensive: change the equation by a multiplier and E0 stays the same while delta G0 scales.
- delta G0 = -nFE0 = -RT ln K, with F = 96500 C mol⁻1; 2.303RT/F = 0.059 V at 298 K.
- Nernst: E = E0 - (0.059/n) log Q, Q is products over reactants raised to their coefficients (pure solids and liquids omitted).
- Faraday: mass = (I t / (n F)) x M; dry cell, lead accumulator and fuel cell have standard cell reactions to recall.
Syllabus line: REDOX REACTIONS AND ELECTROCHEMISTRY Electronic concepts of oxidation and reduction, redox reactions, oxidation number, rules for assigning oxidation number and balancing of redox reactions. Electrolytic and metallic conduction, conductance in electrolytic solutions, molar conductivities and their variation with concentration, Kohlrausch's law and its applications. Electrochemical cells - Electrolytic and Galvanic cells, different types of electrodes, electrode potentials including standard electrode potential, half-cell and cell reactions, emf of a Galvanic cell and its measurement, Nernst equation and its applications, relationship between cell potential and Gibbs' energy change, dry cell and lead accumulator, fuel cells. (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 7 (https://jeemain.nta.nic.in/document/syllabus-2026/); this lesson covers the third sentence.)
Before you start
Prerequisites
- Oxidation number and balancing redox reactions: Half-reactions and the electrons transferred (n) come from balancing. Read this first if you cannot split a redox reaction into halves.
- Entropy, Gibbs energy and spontaneity: delta G, delta G0 and their link to K are used directly. Read this first if delta G = -RT ln K is unfamiliar.
- Chemical equilibrium and the equilibrium constant: The reaction quotient Q and K are written the same way for the Nernst equation. Read this first if Q is unfamiliar.
Related topics
The concept step by step
Step 1: Galvanic and electrolytic cells
A galvanic cell converts the energy of a spontaneous redox reaction into electrical energy. Oxidation takes place at the anode (negative terminal) and reduction at the cathode (positive terminal); electrons flow in the external wire from anode to cathode, and the salt bridge keeps each half-cell neutral. An electrolytic cell does the reverse: an external source forces a non-spontaneous reaction, with the anode positive and the cathode negative. In both cells oxidation is at the anode and reduction is at the cathode.
Step 2: Electrodes, half-cells and cell notation
Types of electrodes: metal in its own ion (Zn | Zn2+), gas electrodes such as the standard hydrogen electrode (platinum, H2 at 1 bar, 1 mol L⁻1 H+), metal with a sparingly soluble salt (Ag | AgCl | Cl-) and redox electrodes (Pt | Fe3+, Fe2+). A cell is written anode on the left: Zn | Zn2+ (c1) || Cu2+ (c2) | Cu, with a single bar for a phase boundary and a double bar for the salt bridge.
Step 3: Standard electrode potential and emf
The standard electrode potential E0 is the potential of a half-cell against the standard hydrogen electrode (taken as zero) when ions are 1 mol L⁻1 and gases are 1 bar at 298 K, listed always as reduction potentials. A larger E0 means that the species is more easily reduced, so a stronger oxidising agent. The emf of the cell is E(cathode) - E(anode), and it is positive for a spontaneous galvanic cell. It is not multiplied by the number of electrons.
Step 4: Gibbs energy and the equilibrium constant
Electrical work from a cell at constant temperature and pressure is the maximum non-expansion work, so delta G = -nFE and delta G0 = -nFE0, where n is the number of electrons in the equation as written and F = 96500 C mol⁻1. Since delta G0 = -RT ln K, we get log K = nE0/0.059 at 298 K. Doubling the equation doubles n and delta G0 but leaves E0 unchanged.
Step 5: The Nernst equation
When concentrations are not standard, E = E0 - (RT/nF) ln Q = E0 - (0.059/n) log Q at 298 K. Q has the concentrations of the products in the numerator and of the reactants in the denominator, each to the power of its coefficient, with pure solids and liquids left out. For a half-reaction, write the reduction form: E = E0 - (0.059/n) log([reduced]/[oxidised]). At equilibrium E = 0 and Q = K. Concentration cells have E0 = 0.
Step 6: Electrolysis and Faraday's laws; commercial cells
Faraday's laws: the mass deposited is m = (I t / (n F)) x M, where I t is the charge in coulombs, so one faraday (96500 C) deposits one mole of a monovalent ion. Cells in series carry the same charge, so moles of products are inversely proportional to their n-factors (equivalents are equal, masses are in the ratio M/n). The lead accumulator (Pb, PbO2, dilute H2SO4) discharges by Pb + PbO2 + 2H2SO4 giving 2PbSO4 + 2H2O; a dry cell has a zinc container and a manganese dioxide cathode; the hydrogen-oxygen fuel cell converts the energy of combustion directly and its product is water.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
E0 values are 0.34 V for Cu2+/Cu and -0.76 V for Zn2+/Zn. Find E0 of the cell Zn | Zn2+ || Cu2+ | Cu.
| Step | Marks |
|---|---|
| Cu2+/Cu has the higher reduction potential, so Cu is the cathode and Zn is the anode. | 1 |
| E0 = E0(cathode) - E0(anode) = 0.34 - (-0.76). | 1 |
| E0 = 1.10 V. | 1 |
| Total: 3 marks | 3 |
Answer: 1.10 V
Fast method: Higher minus lower: 0.34 + 0.76.
Sanity check: The emf is positive, so Zn + Cu2+ is spontaneous, matching the activity series (zinc displaces copper).
Example 2 (easy)
A current of 2.00 A passes through aqueous CuSO4 for 4825 s. Find the mass of copper deposited (Cu = 63.5 g mol⁻1, F = 96500 C mol⁻1).
| Step | Marks |
|---|---|
| Charge = I t = 2.00 x 4825 = 9650 C. | 1 |
| Cu2+ + 2e- giving Cu, so n = 2; moles of Cu = 9650/(2 x 96500) = 0.0500. | 2 |
| Mass = 0.0500 x 63.5 = 3.18 g (3.175 g). | 1 |
| Total: 4 marks | 4 |
Answer: 3.18 g
Fast method: 9650 C is 0.1 F; 0.1 F gives 0.05 mol of copper, 0.05 x 63.5.
Sanity check: One faraday would deposit 31.75 g of copper (half a mole); 0.1 F gives one tenth of that: 3.175 g.
Example 3 (medium)
For Zn | Zn2+ (1.0 mol L⁻1) || Cu2+ (0.010 mol L⁻1) | Cu, E0 = 1.10 V. Find the emf at 298 K, using 2.303RT/F = 0.059 V.
| Step | Marks |
|---|---|
| Reaction Zn + Cu2+ giving Zn2+ + Cu, n = 2; Q = [Zn2+]/[Cu2+] = 1.0/0.010 = 100. | 2 |
| E = E0 - (0.059/2) log Q = 1.10 - 0.0295 x 2. | 2 |
| E = 1.10 - 0.059 = 1.041 V. | 1 |
| Total: 5 marks | 5 |
Answer: 1.04 V (1.041 V)
Fast method: Q = 100, log Q = 2; the correction is 2 x 0.0295 = 0.059 V, subtracted.
Sanity check: Less Cu2+ at the cathode makes the reaction less favourable, so E falls below 1.10 V.
Example 4 (medium)
A cell reaction involving 2 electrons has E0 = 0.30 V at 298 K. Find log10 K, using 2.303RT/F = 0.059 V.
| Step | Marks |
|---|---|
| At equilibrium E = 0 and Q = K, so E0 = (0.059/n) log K. | 2 |
| log K = n E0 / 0.059 = 2 x 0.30/0.059. | 1 |
| log K = 10.17, so K is about 1.5 x 10¹0. | 2 |
| Total: 5 marks | 5 |
Answer: log K = 10.17 (K about 1.5 x 10¹0)
Fast method: n E0 / 0.059: 0.6/0.059, which is a little more than 10.
Sanity check: A positive E0 means K is above 1, so log K must be positive, as found.
Example 5 (hard)
A concentration cell is Cu | Cu2+ (0.001 mol L⁻1) || Cu2+ (0.1 mol L⁻1) | Cu at 298 K. Find the emf, using 2.303RT/F = 0.059 V.
| Step | Marks |
|---|---|
| The more concentrated half-cell is the cathode (Cu2+ is reduced there), the dilute one the anode. | 2 |
| E0 = 0 and n = 2; Q = [Cu2+ at anode]/[Cu2+ at cathode] = 0.001/0.1. | 2 |
| E = 0 - 0.0295 log(0.01) = 0.0295 x 2 = 0.059 V. | 1 |
| Total: 5 marks | 5 |
Answer: 0.059 V
Fast method: A 100-fold ratio gives log = 2, and E = (0.059/2) x 2 = 0.059 V.
Sanity check: The emf is positive and small, as it should be for a concentration cell (millivolt to tens of millivolts range).
Example 6 (hard, multi-step)
A lead accumulator delivers 5.0 A for 3860 s during discharge (Pb + PbO2 + 2H2SO4 giving 2PbSO4 + 2H2O, 2 mol of electrons per mole of reaction). Find the mass of H2SO4 consumed (H2SO4 = 98 g mol⁻1, F = 96500 C mol⁻1).
| Step | Marks |
|---|---|
| Charge = 5.0 x 3860 = 19300 C. | 1 |
| Moles of electrons = 19300/96500 = 0.200. | 2 |
| The reaction uses 2 mol H2SO4 per 2 mol of electrons, so 1 mol H2SO4 per mole of electrons: 0.200 mol. | 2 |
| Mass = 0.200 x 98 = 19.6 g. | 1 |
| Total: 6 marks | 6 |
Answer: 19.6 g of H2SO4
Fast method: 1 F consumes 1 mol of H2SO4 (98 g), and the charge is 0.2 F.
Sanity check: The acid is depleted in proportion to charge, 98 g per faraday, so 0.2 F consumes 19.6 g; the density of the electrolyte falls on discharge.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Cell emf | E cell = E(cathode) - E(anode) (reduction potentials) | reduction potentials of both electrodes; cathode minus anode | V | Example 1 |
| Gibbs energy | delta G0 = -n F E0; delta G = -n F E | n = electrons transferred per mole of reaction as written | J mol⁻1 (F = 96500 C mol⁻1) | none |
| Equilibrium constant | delta G0 = -RT ln K; log K = n E0 / 0.059 at 298 K | 298 K; standard state for the log form | dimensionless | Example 4 |
| Nernst equation | E = E0 - (0.059/n) log Q at 298 K | 298 K; concentrations used in place of activities | V | Example 3 |
| Concentration cell | E = (0.059/n) log(c cathode / c anode); E0 = 0 | same electrode on both sides, 298 K | V | Example 5 |
| Faraday's law | m = I t M / (n F) | constant current; 100 percent current efficiency; M of species deposited | g (I in A, t in s) | Example 2 |
| Combining half-reactions | n3 E3 = n1 E1 + n2 E2 (add delta G0) | half-reactions share a species; add delta G0, not E0 values | V | none |
| Lead accumulator | Pb + PbO2 + 2H2SO4 giving 2PbSO4 + 2H2O (discharge) | discharge only; the reverse occurs on charging | not applicable | Example 6 |
| Fuel cell (acidic) | anode H2 giving 2H+ + 2e-; cathode O2 + 4H+ + 4e- giving 2H2O | acidic electrolyte | not applicable | none |
Common mistakes and speed
- Multiplying E0 by the number of electrons or by the equation multiplier. Why it tempts: delta G = -nFE scales with n, and it is natural to carry the scaling to E as well.
- Inverting Q in the Nernst equation, or leaving the exponents of concentrations out of Q. Why it tempts: Equilibrium constants are written in many different forms, and the sign in the Nernst equation is easily mixed up.
- Using E0 = E0(anode) - E0(cathode), or reversing the sign of an oxidation potential twice. Why it tempts: Tables of oxidation and reduction potentials are both familiar, and the order of subtraction is easy to forget.
- Using the n of the original equation after the equation has been halved or doubled when computing delta G0. Why it tempts: The cell emf looks unchanged, so the whole cell is assumed to be unchanged.
- Writing an E0 for the concentration cell, or treating its emf as zero because the electrodes are identical. Why it tempts: The standard emf is zero, but the concentration term still gives a non-zero emf.
Time per question and fast method
Target: about 90 seconds per question.
For emf, take higher E0 minus lower E0. For Nernst, count n, write Q, take log and use 0.059/n as the multiplier; check the sign by asking whether the cell should be weaker or stronger than standard. For delta G, use -nFE with n for the equation as written. For electrolysis, charge in faradays first.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 6 correct. Pick an option for each question.
Practice
- The standard reduction potentials are -0.76 V for Zn2+/Zn and +0.80 V for Ag+/Ag. The standard emf, in volts,… Verified (T1)
- The cell Zn | Zn2+ (0.001 mol L⁻1) || Cu2+ (0.1 mol L⁻1) | Cu has a standard emf of 1.10 V. Using 2.303RT/F =… Verified (T1)
- For Cu(s) + 2Ag+ giving Cu2+ + 2Ag(s) the standard cell emf is 0.46 V. The standard Gibbs energy change, in… Verified (T1)
- The half-reaction MnO4- + 8H+ + 5e- giving Mn2+ + 4H2O has E0 = 1.51 V. Take 2.303RT/F = 0.059 V at 298 K and… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Cells, electrodes and the electrochemical series
In a galvanic cell the anode is the electrode at which oxidation occurs and is the negative pole; the cathode is where reduction occurs and is positive. In an electrolytic cell the signs of the poles are interchanged but the names anode (oxidation) and cathode (reduction) are retained. Reduction potentials arranged in order give the electrochemical series: a species on the left of a half-reaction with a higher E0 oxidises a species with a lower E0. The more negative the E0 of M(n+)/M, the more strongly M reduces; hence active metals displace less active ones, and hydrogen is liberated from acids by metals with negative E0. The emf of a cell is measured with a potentiometer, which draws no current at balance, so that the measured value is the true emf and not the terminal voltage.
Gibbs energy, intensive and extensive quantities
delta G = -nFE connects the thermodynamics of the previous chapter to the cell. E and E0 are intensive: they do not change if the equation is multiplied by a number. n, delta G and delta G0 are extensive: they scale with the equation. For the Daniell cell Zn + Cu2+ giving Zn2+ + Cu, n = 2 and E0 = 1.10 V, so delta G0 = -2 x 96500 x 1.10 J = -212.3 kJ per mole of reaction; for the equation written with half the coefficients delta G0 = -106.2 kJ, the same E0. Combining half-reactions to get a new half-reaction means adding delta G0, not E0: E0 = (n1 E1 + n2 E2)/n3. For equilibrium: log K = nE0/0.059 at 298 K, and E0 above zero gives K above 1. Both delta G0 and K are properties of the equation as written.
Nernst equation, concentration cells and pH dependence
E = E0 - (0.059/n) log Q. Examples: for Zn + Cu2+ giving Zn2+ + Cu, Q = [Zn2+]/[Cu2+]; for a half-reaction MnO4- + 8H+ + 5e- giving Mn2+ + 4H2O, E = E0 - (0.059/5) log([Mn2+]/([MnO4-][H+]⁸)), which reduces to E = E0 - 0.0944 pH when the two manganese species are at equal concentration. A concentration cell has the same electrodes at different concentrations, so E0 = 0 and E = (0.059/n) log(c2/c1), where c2 is the concentration at the cathode. A cell with E = 0 has reached equilibrium and cannot do work (a flat cell). A common trap is to put the powers of the concentration in Q and then to forget them in the log, or to invert Q.
Faraday's laws, batteries, fuel cells and what examiners test
Quantity of electricity Q = I t (coulombs) and 1 F = 96500 C mol⁻1. Mass deposited m = I t M / (n F). Solutions in series receive the same charge, so mass ratios equal the ratios of M/n, the equivalent weights. In the lead accumulator, discharge consumes 2 mol H2SO4 for every 2 mol of electrons and the density of the acid falls; charging reverses the reaction. In the dry cell the anode is zinc and the cathode graphite with MnO2 and NH4Cl paste. In the hydrogen-oxygen fuel cell (acidic form): H2 giving 2H+ + 2e- at the anode and O2 + 4H+ + 4e- giving 2H2O at the cathode. Examiners test: E0 of a cell from the series, which electrode is anode, Nernst numerical with concentrations, delta G0 and K from E0, the effect of rewriting the equation, mass or time in electrolysis (including series cells), pH-dependent potentials and the reactions of the lead accumulator, dry cell and fuel cell.
Memory hook
Suppose water in a tank on a rooftop flows down a pipe into a ground tank, and you fit a small turbine in the pipe to run a light.
- The height difference between the tanks is the cell emf: a larger drop gives a larger push. The tanks are the two half-cells.
- The amount of water that flows is the charge; the work is the drop x the charge, like the electrical work nFE.
- As the rooftop tank empties and the ground tank fills, the height difference falls; when both levels are equal, nothing flows. That is the cell going to equilibrium, E = 0, with the Nernst equation giving the drop in the push as concentrations change.
The emf is the push, the charge is the flow, and work = nFE; as concentrations change the push falls until the equilibrium E = 0 is reached.
Work equals charge times push: delta G = -nFE.
Revision card
Try to answer each without looking above.
- State which electrode is the anode and cathode in galvanic and electrolytic cells.
- Write the expression for the emf of a cell from reduction potentials.
- Write delta G0 in terms of E0 and in terms of K.
- Write the Nernst equation at 298 K and the form of Q.
- What is E0 for a concentration cell, and what happens to E0 and delta G0 if the equation is written twice?
- Write the discharge reaction of the lead accumulator.
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 2; fixed: 2
- Report: content/reviews/learn4-red-2026-11-20.md
Textbook references
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 2: Electrochemistry, 2.2 Galvanic Cells (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 2: Electrochemistry, 2.6.2 Secondary Batteries (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 2: Electrochemistry, 2.2.1 Measurement of Electrode Potential (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 2: Electrochemistry, 2.3.2 Electrochemical Cell and Gibbs Energy of the Reaction (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 2: Electrochemistry, 2.5 Electrolytic Cells and Electrolysis (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 2: Electrochemistry, 2.6.1 Primary Batteries (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 2: Electrochemistry, Example 2.10 Electrolytic Cells and Electrolysis (read 2026-11-22)
- NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 2: Electrochemistry, 2.3.1 Equilibrium Constant from Nernst Equation (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 7, text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
- NCERT Class 12 Chemistry, Electrochemistry chapter: named as the scope reference only; not opened for this draft, so textbook section references are pending. Content written fresh.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.