EngineeringRise

Chemical Equations and Stoichiometry: JEE Main Questions

Reviewed Last updated 2026-11-20. Syllabus topic: Chemical equations and stoichiometry.

In short. Stoichiometry uses the coefficients of a balanced equation as mole ratios. Convert to moles, find the limiting reagent by dividing by coefficients, calculate the product from it, then convert back to grams or litres at STP.

  • Balance the equation by atoms first; coefficients are mole ratios, not mass ratios.
  • Limiting reagent: the smallest value of (moles / coefficient); it fixes the extent of reaction.
  • Product moles = coefficient x extent; convert to grams with the molar mass.
  • Percentage yield = (actual / theoretical) x 100; apply it after the theoretical amount is found.
  • Gas volumes at STP use the molar volume given in the stem (for example 22.4 L/mol).

Syllabus line: SOME BASIC CONCEPTS IN CHEMISTRY Matter and its nature, Dalton's atomic theory, Concept of atom, molecule, element and compound, Laws of chemical combination, Atomic and molecular masses, mole concept, molar mass, percentage composition, empirical and molecular formulae, Chemical equations and stoichiometry. (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 1 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

Related topics

The concept step by step

  1. Step 1: A balanced equation is a recipe in moles

    Conservation of mass means the same atoms appear on both sides, so we balance by changing coefficients, never subscripts. N2 + 3H2 giving 2NH3 is balanced: 2 N and 6 H on each side. The coefficients say that 1 mol of N2 reacts with 3 mol of H2 to give 2 mol of NH3. They count moles or molecules, not grams.

  2. Step 2: Mass to moles to moles to mass

    To find the mass of a product, convert the given mass to moles (divide by molar mass), multiply by the ratio of coefficients (wanted over given), and convert back to grams (multiply by molar mass). From 14 g of N2: 14 / 28 = 0.5 mol, then 0.5 x 2 = 1.0 mol of NH3, then 1.0 x 17 = 17 g. Writing the three arrows keeps units straight.

  3. Step 3: Two reactants given, find the limiting one

    If the amounts of two reactants are given, one of them may run out first. Convert both to moles and divide each by its coefficient. The smaller quotient belongs to the limiting reagent. For 5.6 g of N2 (0.2 mol) and 3.0 g of H2 (1.5 mol), the quotients are 0.2 and 0.5, so N2 is limiting and decides the product.

  4. Step 4: Product and leftover from the limiting reagent

    The smallest quotient is the extent of reaction. Moles of any product = its coefficient x extent, and moles of excess reagent left = initial moles - coefficient x extent. In the N2 and H2 example the extent is 0.2, so NH3 is 0.4 mol (6.8 g) and H2 left is 1.5 - 0.6 = 0.9 mol. Do not use the excess reagent for the product.

  5. Step 5: Percentage yield

    A real reaction often gives less than the calculated theoretical yield. Percentage yield = actual / theoretical x 100. If the theoretical yield is 10.2 g and 8.16 g is obtained, the yield is 80 percent. If the yield and actual mass are known and the starting amount is wanted, divide by the yield fraction, since you must start with more than the ideal amount.

  6. Step 6: Volumes of gases at STP

    When the stem gives the molar volume at STP, volume = moles x molar volume. With 22.4 L/mol, 0.1 mol of CO2 occupies 2.24 L. Only the volume of gases is found this way; solids and liquids are converted with molar mass. Use the number given in the stem and do not bring in other gas relations in this chapter.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

Atomic masses: H = 1, N = 14. In N2 + 3H2 giving 2NH3, find the mass of ammonia obtained from 14 g of nitrogen with excess hydrogen.

Marks-style solution of example 1
StepMarks
Moles of N2 = 14 / 28 = 0.50 mol.1
Mole ratio N2 : NH3 = 1 : 2, so NH3 = 1.0 mol.1
Answer: mass = 1.0 x 17 = 17 g.1
Total: 3 marks3

Answer: 17 g

Fast method: Half a mole of N2 gives one mole of NH3: 17 g.

Sanity check: The 17 g of NH3 contains the 14 g of nitrogen plus 3 g of hydrogen from the excess H2, so mass is conserved.

Example 2 (easy)

Atomic masses: H = 1, O = 16. In 2H2 + O2 giving 2H2O, find the mass of oxygen needed to burn 2.0 g of hydrogen completely.

Marks-style solution of example 2
StepMarks
Moles of H2 = 2.0 / 2 = 1.0 mol.1
Ratio H2 : O2 = 2 : 1, so O2 = 0.50 mol.1
Answer: 0.50 x 32 = 16 g of oxygen.1
Total: 3 marks3

Answer: 16 g

Fast method: 2 g of H2 is one mole; half a mole of O2 is 16 g.

Sanity check: Water formed would be 18 g = 2 g + 16 g, which confirms conservation of mass.

Example 3 (medium)

Atomic masses: Na = 23, H = 1, C = 12, O = 16, Cl = 35.5. In Na2CO3 + 2HCl giving 2NaCl + H2O + CO2, find the mass of HCl needed to react completely with 10.6 g of Na2CO3.

Marks-style solution of example 3
StepMarks
Molar mass of Na2CO3 = 106 g/mol, so moles = 10.6 / 106 = 0.100 mol.1
Ratio Na2CO3 : HCl = 1 : 2, so HCl = 0.200 mol.1
Answer: 0.200 x 36.5 = 7.3 g of HCl.1
Total: 3 marks3

Answer: 7.3 g

Fast method: 0.1 mol of carbonate needs twice that of acid: 0.2 x 36.5 = 7.3.

Sanity check: Acid mass 7.3 g is less than the carbonate 10.6 g although there are twice as many moles, because HCl has the smaller molar mass.

Example 4 (medium)

Atomic masses: Ca = 40, C = 12, O = 16. Molar volume at STP is 22.4 L/mol. CaCO3 giving CaO + CO2 on heating. Find the volume of CO2 at STP obtained from 10.0 g of CaCO3.

Marks-style solution of example 4
StepMarks
Moles of CaCO3 = 10.0 / 100 = 0.100 mol.1
Ratio CaCO3 : CO2 = 1 : 1, so CO2 = 0.100 mol.1
Answer: volume = 0.100 x 22.4 = 2.24 L.1
Total: 3 marks3

Answer: 2.24 L

Fast method: A tenth of a mole of gas is a tenth of 22.4 L.

Sanity check: Volume in litres of order a few litres is right for a tenth of a mole of gas; the solid products occupy negligible volume.

Example 5 (medium)

Atomic masses: H = 1, O = 16. 4.0 g of hydrogen is mixed with 16 g of oxygen and the reaction 2H2 + O2 giving 2H2O goes to completion. Find the mass of water formed.

Marks-style solution of example 5
StepMarks
Moles: H2 = 4.0 / 2 = 2.0 mol; O2 = 16 / 32 = 0.50 mol.1
Divide by coefficients: H2 2.0 / 2 = 1.0; O2 0.50 / 1 = 0.50. O2 is limiting.2
Water = 2 x 0.50 = 1.0 mol; mass = 1.0 x 18 = 18 g.1
Answer: 18 g (2.0 g of hydrogen is left over).1
Total: 5 marks5

Answer: 18 g

Fast method: O2 is short: 0.5 mol O2 makes 1 mol water, 18 g.

Sanity check: Total mass 20 g supplied; 18 g of water plus 2 g of H2 left over is 20 g, so mass is conserved (hydrogen used 2 g, left 2 g).

Typical trap: Using the hydrogen to calculate water (2 mol, 36 g) because it has the larger mass or the larger number of moles, rather than dividing each amount by its coefficient to find the limiting reagent.

Example 6 (hard, multi-step)

Atomic masses: O = 16, Al = 27. In 4Al + 3O2 giving 2Al2O3, 5.4 g of aluminium reacts with 9.6 g of oxygen and 8.16 g of Al2O3 is actually obtained. Find the percentage yield.

Marks-style solution of example 6
StepMarks
Moles: Al = 5.4 / 27 = 0.20 mol; O2 = 9.6 / 32 = 0.30 mol.1
Divide by coefficients: Al 0.20 / 4 = 0.050; O2 0.30 / 3 = 0.100. Al is limiting.2
Theoretical Al2O3 = 2 x 0.050 = 0.100 mol = 0.100 x 102 = 10.2 g.2
Answer: yield = 8.16 / 10.2 x 100 = 80 percent.1
Total: 6 marks6

Answer: 80 percent

Fast method: Al limits: 0.2 mol Al gives 0.1 mol Al2O3 = 10.2 g; 8.16 / 10.2 = 0.8.

Sanity check: A yield below 100 percent is physically sensible; the theoretical 10.2 g lies between the aluminium used (5.4 g) and the total of the reactants (15.0 g).

Example 7 (hard, multi-step)

Atomic masses: O = 16, Cl = 35.5, K = 39. In 2KClO3 giving 2KCl + 3O2, the yield of oxygen is 80 percent. What mass of KClO3 is needed to obtain 9.6 g of O2?

Marks-style solution of example 7
StepMarks
Moles of O2 wanted (actual) = 9.6 / 32 = 0.30 mol.1
Theoretical O2 = 0.30 / 0.80 = 0.375 mol.2
KClO3 = 0.375 x 2 / 3 = 0.250 mol, with molar mass 122.5 g/mol.2
Answer: mass = 0.250 x 122.5 = 30.6 g.1
Total: 6 marks6

Answer: 30.6 g (30.625 g)

Fast method: Without yield the need would be 24.5 g; divide by 0.8 to get 30.6 g.

Sanity check: The answer must exceed the 24.5 g needed at 100 percent yield, because a low yield demands more reactant.

Typical trap: Multiplying 24.5 g by 0.80 (giving 19.6 g) instead of dividing: a requirement problem with a low yield needs more starting material, not less.

Formulas and units

Formula and unit box for Chemical equations and stoichiometry
ResultFormulaValid whenUnits or noteWorked example
Mole ration(B) = n(A) x (coefficient of B / coefficient of A)balanced equation; reaction goes to completion for the reagent usedmolExample 1
Extent of reactionextent = n(reactant) / coefficient, smallest value is the limiting reagentbalanced equation; all reactants considered togethermolExample 5
Product amountn(product) = coefficient x extentbalanced equation; reaction goes to completion by the extentmolExample 5
Mass of productm = n x Mnot applicablegExample 1
Percentage yieldactual / theoretical x 100actual and theoretical both in the same unitpercentExample 6
Reactant needed with yieldtheoretical = actual / (yield / 100)yield given as percent of theoretical; asked for the reactant neededg or molExample 7
Gas volume at STPV = n x V_m (V_m as given in the stem, for example 22.4 L/mol)gas at STP; use the molar volume given in the stemLExample 4
Excess reagent leftn(left) = n(initial) - coefficient x extentbalanced equation; reaction has gone to completionmolExample 5

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Using the mole ratio on a reactant that is in excess. Why it tempts: Both masses are given, and either one gives a clean-looking answer; the larger option is usually listed.
  • Comparing masses (or moles without dividing by coefficients) to find the limiting reagent. Why it tempts: The smaller mass looks like the one that runs out first, but molar masses and coefficients differ.
  • Treating coefficients as mass ratios. Why it tempts: The equation is written with numbers in front of formulae, which look like quantities in grams.
  • Multiplying by the yield in a requirement problem (instead of dividing). Why it tempts: Percentage yield is usually applied by multiplication, so the same step is repeated without thinking about direction.
  • Using the wrong molar volume or forgetting to convert moles to litres. Why it tempts: The mole answer 0.05 looks like a finished result, and 22.4 L/mol is only needed at the last step.

Time per question and fast method

Target: about 100 seconds per question.

Convert each given mass to moles, divide each by its coefficient and pick the smaller quotient: that is the extent of reaction. Multiply it by the product coefficient and the molar mass. Apply percentage yield last. For a requirement problem with yield, divide by the yield fraction.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. Atomic masses: Ca = 40, C = 12, O = 16. The mass of CaO obtained by heating 50 g of CaCO3 (CaCO3 giving CaO + CO2) is
Show the answer

Answer: C: 28 g. 50 / 100 = 0.50 mol CaCO3 gives 0.50 mol CaO = 0.50 x 56 = 28 g.

Question 2. In C3H8 + 5O2 giving 3CO2 + 4H2O, the moles of O2 needed to burn 0.4 mol of C3H8 is
Show the answer

Answer: B: 2.0 mol. Ratio 1 : 5, so 0.4 x 5 = 2.0 mol.

Question 3. The theoretical yield of a product is 8.5 g and 6.8 g is obtained. The percentage yield is
Show the answer

Answer: C: 80. 6.8 / 8.5 x 100 = 80 percent.

Question 4. The limiting reagent in a reaction is the one that
Show the answer

Answer: D: is used up first and decides the amount of product. The limiting reagent is exhausted first; mass or molar mass alone does not identify it, because coefficients matter.

Question 5. For N2 + 3H2 giving 2NH3, which statement is correct?
Show the answer

Answer: B: 1 mol N2 reacts with 3 mol H2. Coefficients are mole ratios. In grams the ratio is 28 g to 6 g.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Balanced equations and what coefficients mean

A chemical equation shows reactants and products with formulae; it is balanced when each element has the same number of atoms on both sides, which expresses conservation of mass. Balance by inspection: start with the element that appears in the fewest species, change coefficients (never subscripts), and finish with oxygen or hydrogen. The coefficients are the ratio of moles (and of molecules), so N2 + 3H2 giving 2NH3 means 1 mol N2 reacts with 3 mol H2 to give 2 mol NH3. They are not a ratio of masses: 28 g of N2 reacts with 6 g of H2 to give 34 g of NH3. States may be written (s), (l), (g), (aq). Redox balancing methods are not part of this topic.

The mole-ratio method

Every stoichiometry question follows one path: write the balanced equation; convert the given mass to moles; multiply by the ratio (coefficient wanted / coefficient given); convert the answer to grams, molecules, or, for a gas at STP, litres using the molar volume stated in the stem. For propane, C3H8 + 5O2 giving 3CO2 + 4H2O, 1 mol of propane (44 g) needs 5 mol of O2 (160 g) and gives 3 mol of CO2 (132 g); the masses on the two sides still add up (204 g each), which is a good check. If the problem gives the amounts of two reactants, it is a limiting-reagent problem: do not use the mole ratio on either of them yet.

Limiting reagent and excess reagent

The limiting reagent is the reactant that is used up first and so decides how much product forms; the other reactant is in excess and part of it is left over. Method: for each reactant compute moles divided by its coefficient; the smallest quotient identifies the limiting reagent and equals the extent of reaction. Then product moles = (product coefficient) x extent, and excess left = initial moles - (coefficient x extent). The mistake to avoid is comparing masses, or comparing moles without dividing by coefficients. The excess reagent never decides the product amount, even if its mass is larger or smaller than the mass of the limiting reagent.

Percentage yield and sequential steps

The theoretical yield is the amount predicted from the limiting reagent; the actual yield is what is obtained, and percentage yield = actual / theoretical x 100. Questions use it in two directions: given the actual mass, find the yield; or given the yield, find the actual mass from the theoretical one. A requirement problem runs backwards: to obtain a stated actual mass at 80 percent yield, the theoretical mass is actual / 0.80, so the reactant needed is larger. Where the product of one reaction feeds the next, multiply the mole ratios through the sequence and apply any yield at the stage given. Keep units: percent is a fraction of 100, and the yield multiplies the product, never the reactant that was supplied.

Gas volumes at STP, mixtures, and what examiners test

When the stem gives the molar volume at STP (for example 22.4 L/mol), the volume of a gaseous product is moles x molar volume. Use only the value given and do not bring in the gas laws, which belong to another chapter. Typical JEE Main items combine: a limiting reagent with a mass of product; a yield with a requirement; a mixture of two reactants where unknown masses are found from the total and the product; and counting question such as how many moles of O2 are needed for a given amount of fuel. Check by conservation of mass: mass of reactants used equals mass of products formed, and make sure the final unit (g, mol, molecules or L) is the one asked.

Memory hook

Suppose a tiffin caterer in Pune makes sandwiches, each needing 2 slices of bread and 1 slice of cheese, and today he has 30 slices of bread and 20 slices of cheese.

  1. Bread supports 30 / 2 = 15 sandwiches, and cheese supports 20 / 1 = 20 sandwiches.
  2. He can only make 15 sandwiches, because bread runs out first; 5 slices of cheese are left over.
  3. If a customer complains that only 12 of the 15 were fit to deliver, the delivered fraction is 12 out of 15, which is 80 percent.

The sandwich recipe is the balanced equation, the shorter supply divided by its coefficient is the limiting reagent, and the fraction delivered is the percentage yield.

Divide each supply by its recipe number; the smallest decides the batch.

Revision card

Try to answer each without looking above.

  1. What do the coefficients of a balanced equation represent: moles or masses?
  2. State the steps to find the limiting reagent.
  3. How do you find the amount of excess reagent left over?
  4. Write the formula for percentage yield and say when to apply it.
  5. How does a requirement problem with a yield below 100 percent change the reactant needed?
  6. How is the volume of a gaseous product obtained when the molar volume is given?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (see content/reviews/scope-audit-2026-11-20.md)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 2; fixed: 2
  • Report: content/reviews/learn2-sbc-2026-11-20.md

Textbook references

  • NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 1: Some Basic Concepts of Chemistry, 1.10 Stoichiometry and Stoichiometric Calculations (read 2026-11-22)
  • NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 1: Some Basic Concepts of Chemistry, 1.10.1 Limiting Reagent (read 2026-11-22)
  • NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 1: Some Basic Concepts of Chemistry, Problem 1.4 Problem 1.4 (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 1, read from syllabus/lines/jee-main/2026.json (line jee-main-2026-U35).
  • NCERT Class 11 Chemistry Part 1, Chapter 1 (scope reference only; content written fresh; section numbers not yet attached, to be added at review).

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.