Chemical Equilibrium and K_c, K_p: JEE Main Chemistry Notes
Reviewed Last updated 2026-11-20. Syllabus topic: Chemical equilibrium and the equilibrium constant.
In short. At equilibrium the forward and backward rates are equal and the composition is steady. K_c is the ratio of product to reactant concentrations raised to their coefficients, K_p = K_c (RT)^(delta n), and pure solids and liquids are left out of K. Only temperature changes K.
- K_c = [C]ᶜ [D]ᵈ/([A]ᵃ [B]ᵇ) with equilibrium concentrations; K_p uses partial pressures; K_p = K_c (RT)^(delta n) counts gas moles only.
- Reverse the equation: 1/K. Multiply it by n: Kⁿ. Add equations: multiply the K values.
- Pure solids and liquids do not appear in K; a heterogeneous equilibrium such as CaCO3 = CaO + CO2 has K_p = p(CO2).
- Use an ICE table; solve the quadratic exactly and reject the root that exceeds the available amount.
- Only temperature changes K. Catalyst, pressure and initial amounts do not.
Syllabus line: EQUILIBRIUM Meaning of equilibrium is the concept of dynamic equilibrium. Equilibria involving physical processes: Solid-liquid, liquid-gas, gas-gas and solid-gas equilibria, Henry's law. General characteristics of equilibrium involving physical processes. Equilibrium involving chemical processes: Law of chemical equilibrium, equilibrium constants (Kp and Kc) and their significance, the significance of delta G and delta G standard in chemical equilibrium, factors affecting equilibrium concentration, pressure, temperature, the effect of catalyst, Le Chatelier's principle. Ionic equilibrium: Weak and strong electrolytes, ionization of electrolytes, various concepts of acids and bases (Arrhenius, Bronsted - Lowry and Lewis) and their ionization, acid-base equilibria (including multistage ionization) and ionization constants, ionization of water, pH scale, common ion effect, hydrolysis of salts and pH of their solutions, the solubility of sparingly soluble salts, solubility products and buffer solutions. (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 6 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Some basic concepts of chemistry (lesson planned): Mole ratios and concentrations feed every ICE table. Read this first if you cannot convert moles to molarity.
- First law, enthalpy and calorimetry: Gases and the ideal gas equation appear in K_p and K_c conversion. Read this first if PV = nRT in different units is unclear.
- Entropy, Gibbs energy and spontaneity: Delta G = -RT ln K connects thermodynamics to K. Read this first if the sign of delta G for K greater than 1 is not obvious.
Related topics
The concept step by step
Step 1: A reversible reaction runs both ways
In a closed vessel a reversible reaction such as N2O4 = 2NO2 proceeds forwards and backwards at once. At the start the forward rate is high and the backward rate is zero. As products build up the backward rate rises until the two rates are equal. From then on the amounts stay fixed even though both reactions continue; this is dynamic equilibrium, and you can reach it from either side.
Step 2: Writing the equilibrium constant
For aA + bB = cC + dD the equilibrium constant is K_c = [C]ᶜ [D]ᵈ/([A]ᵃ [B]ᵇ), where each bracket is the equilibrium concentration in mol/L. Products go on top, reactants below, each raised to its coefficient. A large K means the mixture is rich in products, a small K means mostly reactants. K depends only on the temperature and on how the equation is written, not on the starting amounts.
Step 3: Gases, K_p and the role of delta n
For gases you may use partial pressures: K_p = (p_C)ᶜ (p_D)ᵈ/((p_A)ᵃ (p_B)ᵇ). Since p = cRT for each gas, K_p = K_c (RT)^(delta n), where delta n is moles of gas on the product side minus moles of gas on the reactant side. With R = 0.0821 L atm/(mol K), K_p is in atm^(delta n). With R = 8.314 J/(mol K) the pressure is in pascal and K_c must be in (mol/m³)^(delta n); JEE problems use the L atm form unless the stem says otherwise.
Step 4: Solids and liquids are left out; changing the equation changes K
A pure solid or liquid has a fixed concentration, so it is absorbed into K: for CaCO3(s) = CaO(s) + CO2(g), K_p is just p(CO2). If you reverse the equation, K becomes 1/K. If you multiply the equation by n, K becomes Kⁿ (halving takes the square root). If you add two equations, you multiply their K values. Reverse and halve together: take 1/K first, then the square root.
Step 5: Solving for amounts with an ICE table
Write Initial, Change and Equilibrium rows. Put a change of -ax, -bx for reactants and +cx, +dx for products, add to get equilibrium amounts, convert to concentrations using the volume, and substitute into K. For a dissociation A = B + C with degree of dissociation alpha, starting from 1 mol, total moles are 1 + alpha. When K is a perfect square with delta n = 0, take the square root of both sides. Otherwise solve the quadratic and reject the root that gives a negative or too large amount.
Step 6: What delta G and delta G standard say about equilibrium
Delta G standard (the standard Gibbs energy change) and K are tied by delta G standard = -RT ln K, with R = 8.314 J/(mol K). If K is greater than 1, delta G standard is negative; if K is less than 1 it is positive; if K = 1 it is zero. For a mixture that is not yet at equilibrium, delta G = delta G standard + RT ln Q = RT ln(Q/K): when Q is below K, delta G is negative and the reaction goes forward; when Q is above K it goes backward; at equilibrium delta G = 0. Example: delta G standard = -5.0 kJ/mol at 298 K gives K = exp(5000/(8.314 x 298)) = 7.5.
Step 7: What shifts the equilibrium (Le Chatelier)
Adding a reactant or removing a product shifts the reaction forward; the opposite shifts it back. Raising the pressure by reducing the volume favours the side with fewer moles of gas, and nothing shifts if delta n is zero. Raising the temperature favours the endothermic direction: K rises if delta H is positive and falls if it is negative. An inert gas at constant volume changes nothing, but at constant total pressure it enlarges the volume and favours more moles of gas. A catalyst changes only the time to reach equilibrium, never K. Only temperature changes K; the other changes shift the composition by changing Q.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
At equilibrium for H2(g) + I2(g) = 2HI(g) in a 1.0 L vessel, the amounts are 0.10 mol H2, 0.10 mol I2 and 0.70 mol HI. Find K_c.
| Step | Marks |
|---|---|
| Write K_c = [HI]²/([H2][I2]). | 1 |
| Volume is 1.0 L, so concentrations equal the moles: 0.70, 0.10 and 0.10 mol/L. | 1 |
| K_c = (0.70)²/(0.10 x 0.10) = 0.49/0.010 = 49. | 1 |
| Total: 3 marks | 3 |
Answer: 49 (no units, delta n = 0)
Fast method: Square the product, divide by the product of reactants: 0.49/0.01 = 49.
Sanity check: Delta n = 0, so K_c has no units. A K far greater than 1 agrees with product (HI) being more abundant than reactants.
Example 2 (easy)
For N2O4(g) = 2NO2(g), K_c = 6.0 x 10⁻3 mol/L at 300 K. Using R = 0.0821 L atm/(mol K), find K_p in atm.
| Step | Marks |
|---|---|
| Delta n(g) = 2 - 1 = +1. | 1 |
| K_p = K_c (RT)¹ = 6.0 x 10⁻3 x (0.0821 x 300). | 1 |
| RT = 24.63 L atm/mol, so K_p = 0.148 atm. | 1 |
| Total: 3 marks | 3 |
Answer: about 0.148 atm
Fast method: Delta n = +1 so multiply by RT = 24.6: 0.006 x 24.6 = 0.148.
Sanity check: Delta n is positive, so K_p is larger than K_c by the factor RT = 24.6; the units are atm because delta n = 1.
Example 3 (medium)
For N2O4(g) = 2NO2(g), K_p = 0.14 atm. Find the degree of dissociation of N2O4 when the equilibrium total pressure is 1.0 atm.
| Step | Marks |
|---|---|
| Start with 1 mol: N2O4 = 1 - a, NO2 = 2a, total = 1 + a. | 1 |
| K_p = [2a/(1+a)]² P / [(1-a)/(1+a)] = 4 a² P/(1 - a²). | 1 |
| a² = K_p/(K_p + 4P) = 0.14/4.14 = 0.0338, so a = 0.184. | 2 |
| Total: 4 marks | 4 |
Answer: about 0.184 (18.4 percent)
Fast method: a = sqrt(K_p/(K_p + 4P)) = sqrt(0.14/4.14) = 0.184.
Sanity check: Small K_p gives small dissociation. Limit: K_p tending to infinity gives a = 1 (complete), K_p = 0 gives a = 0.
Example 4 (medium)
For N2(g) + 3H2(g) = 2NH3(g), K_c = 0.50. Find K_c for NH3(g) = (1/2)N2(g) + (3/2)H2(g).
| Step | Marks |
|---|---|
| Reverse the equation: K becomes 1/0.50 = 2.0 (2NH3 = N2 + 3H2). | 1 |
| Halve the equation: K becomes the square root of 2.0. | 1 |
| K = 1.414. | 1 |
| Total: 3 marks | 3 |
Answer: about 1.41
Fast method: Reverse then halve: sqrt(1/0.5) = sqrt(2) = 1.41.
Sanity check: Starting K below 1 means formation is unfavourable, so the decomposition constant must exceed 1; 1.41 is greater than 1 and is less than the whole-equation value 2.0 as it should be for a root.
Example 5 (hard, multi-step)
A 2.0 L vessel initially holds 0.20 mol PCl5(g) only. At a certain temperature K_c = 0.040 mol/L for PCl5(g) = PCl3(g) + Cl2(g). Find the equilibrium amount of PCl3 in mol.
| Step | Marks |
|---|---|
| Initial [PCl5] = 0.20/2.0 = 0.10 mol/L. Let x mol/L dissociate: [PCl5] = 0.10 - x, [PCl3] = [Cl2] = x. | 1 |
| x²/(0.10 - x) = 0.040 gives x² + 0.040x - 0.0040 = 0. | 1 |
| x = (-0.040 + sqrt(0.0016 + 0.016))/2 = (-0.040 + 0.1327)/2 = 0.0463 mol/L (reject the negative root). | 2 |
| Moles of PCl3 = 0.0463 x 2.0 = 0.0927 mol. | 1 |
| Total: 5 marks | 5 |
Answer: about 0.093 mol
Fast method: Solve x² + 0.04x - 0.004 = 0 directly; the approximation 0.10 - x about 0.10 would give x = 0.063, which is more than half the sample, so it is not valid.
Sanity check: The result, 0.0927 mol, is less than the 0.20 mol available, and the concentration 0.0463 mol/L is less than 0.10 mol/L, so the root is physically allowed.
Example 6 (hard, multi-step)
For CaCO3(s) = CaO(s) + CO2(g), K_p = 0.20 atm at 1000 K. A 10 L evacuated vessel at 1000 K is charged with CaCO3. Taking R = 0.0821 L atm/(mol K), find the minimum amount of CaCO3, in mol, that must be added so that equilibrium is established.
| Step | Marks |
|---|---|
| For a heterogeneous equilibrium K_p = p(CO2) = 0.20 atm. | 1 |
| Moles of CO2 needed to reach this pressure = pV/(RT) = 0.20 x 10/(0.0821 x 1000). | 1 |
| n = 2.0/82.1 = 0.0244 mol of CO2, which comes from 0.0244 mol of CaCO3 (1 : 1). | 2 |
| Total: 4 marks | 4 |
Answer: about 0.0244 mol
Fast method: Pressure fixed at 0.20 atm; n = pV/RT = 2.0/82.1 = 0.0244 mol, independent of how much solid you add beyond that.
Sanity check: Units: atm x L divided by (L atm/(mol K) x K) gives mol. About 0.024 mol (2.4 g) of CaCO3 is a plausible laboratory amount for a 10 L flask.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Equilibrium constant (concentrations) | K_c = [C]ᶜ [D]ᵈ/([A]ᵃ [B]ᵇ) | Gaseous or dissolved species at equilibrium; pure solids and liquids left out | (mol/L)^(delta n) | Example 1 |
| Equilibrium constant (pressures) | K_p = (p_C)ᶜ (p_D)ᵈ/((p_A)ᵃ (p_B)ᵇ) | Gaseous species at equilibrium, partial pressures in the same units | atm^(delta n) | Example 3 |
| K_p and K_c | K_p = K_c (RT)^(delta n) | Ideal gases; T in kelvin; R matched to pressure and concentration units | R = 0.0821 L atm/(mol K) for atm | Example 2 |
| Reverse and scale | reverse: 1/K; multiply equation by n: Kⁿ; add reactions: K₁ K₂ | Same temperature; applied to the equation as written | dimensionless rule | Example 4 |
| Reaction quotient | Q K backward | not applicable | same as K | none |
| Dissociation A = B + C | K_p = a² P/(1 - a²) | One mole of A giving B + C, ideal gases; a is degree of dissociation; P is total pressure | atm | none |
| Dissociation A = 2B (N2O4) | K_p = 4 a² P/(1 - a²) | One mole of A giving 2B (as N2O4), ideal gases; P is total pressure | atm | Example 3 |
| Link to Gibbs energy | delta G(standard) = -RT ln K; delta G = RT ln(Q/K) | Standard state at the given temperature; K is thermodynamic constant | J/mol | none |
| Heterogeneous equilibrium | pure solids and liquids omitted from K | not applicable | none | Example 6 |
Common mistakes and speed
- Using the wrong sign of delta n in K_p = K_c (RT)^(delta n), or counting solids and liquids in delta n. Why it tempts: Total moles in the balanced equation look like the natural count, and the sign slip gives a value that differs only by a factor of (RT) to the power of the error in delta n (a factor of RT squared when delta n is 1 and the sign is wrong).
- Treating K_p as dimensionless, or giving atm⁻1 where delta n is positive. Why it tempts: Many textbook problems have delta n = 0 and the habit carries over to cases where units matter.
- Using the quadratic root that exceeds the initial amount. Why it tempts: Both roots solve the equation, and the larger root is often the "nicer" number.
- Putting pure solids or liquids into the K expression. Why it tempts: The balanced equation lists them with coefficients, so they seem part of the ratio.
- Not taking the square root when halving an equation, or taking it when doubling. Why it tempts: The rule is easy to remember the wrong way round: multiplying the equation by n raises K to the power n, so halving takes the square root, and mixing the two up gives K squared or K halved.
- Using the initial moles instead of equilibrium concentrations in K when delta n is not zero, forgetting the volume. Why it tempts: Moles are what the stem gives, and for delta n = 0 they do work, so the shortcut is trusted too widely.
Time per question and fast method
Target: about 120 seconds per question.
Write delta n first: it gives the units of K and the K_p, K_c link at once. For dissociation use a² = K/(K + P x factor) directly. If K is a perfect square, take the square root of the K expression before expanding. For combined reactions apply reverse (1/K), scale (power) and add (product) in that order. Test your quadratic root against the amount available before choosing an option.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 5 correct. Pick an option for each question.
Practice
- For the reversible reaction 2SO2(g) + O2(g) = 2SO3(g) at 500 K, K_c = 4.0 (in L/mol). Taking R = 0.0821 L… Verified (T1)
- PCl5(g) dissociates as PCl5(g) = PCl3(g) + Cl2(g). At a certain temperature K_p = 0.50 atm. When the… Verified (T1)
- In a 1.0 L closed vessel, 1.0 mol of H2 and 2.0 mol of I2 are heated to a temperature at which K_c = 49 for… Verified (T1)
- For the reactions 2A = B with K₁ = 4.0 and B + C = 2D with K₂ = 0.50, the equilibrium constant for A + (1/2)C… Verified (T1)
- In a 2.0 L vessel, 4.0 mol of A and 4.0 mol of B react as A(g) + B(g) = C(g) + D(g), with K_c = 9 at the… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Dynamic equilibrium and the equilibrium constant
A reversible reaction reaches equilibrium when the rate of the forward reaction equals the rate of the backward reaction in a closed system at constant temperature. Nothing seems to change at the macroscopic level, but both reactions continue: this is dynamic equilibrium, which can be approached from either side. By the law of mass action, for aA + bB = cC + dD the equilibrium constant is K_c = [C]ᶜ [D]ᵈ/([A]ᵃ [B]ᵇ), where each bracket is the equilibrium molar concentration in mol/L. K depends only on temperature and on how the equation is written; it does not depend on initial amounts, pressure, volume or catalyst. A catalyst speeds both directions equally, so it shortens the time to equilibrium without changing K. A large K means products dominate; a small K means reactants dominate. Units of K_c are (mol/L) raised to delta n, so K_c is dimensionless only when delta n = 0.
K_p, K_c and the role of delta n
For gas-phase reactions the equilibrium constant can be written with partial pressures: K_p = (p_C)ᶜ (p_D)ᵈ/((p_A)ᵃ (p_B)ᵇ). Using p = (n/V) RT = cRT for each gas gives K_p = K_c (RT)^(delta n), where delta n = (c + d) - (a + b) counts gaseous species only. With R = 0.0821 L atm/(mol K), K_p is in atm^(delta n) and K_c in (mol/L)^(delta n); with R = 8.314 J/(mol K) the pressure is in pascal and K_c must then be in (mol/m³)^(delta n); JEE problems use the L atm form unless the stem says otherwise. For delta n = 0, K_p = K_c; for delta n greater than 0, K_p exceeds K_c when the number RT is more than 1 (with R = 0.0821 L atm/(mol K) and T in kelvin, RT is about 24 at 298 K, so this holds); for delta n less than 0, K_p is smaller. Pure solids and pure liquids have constant activity and are omitted: for CaCO3(s) = CaO(s) + CO2(g), K_p = p(CO2) and K_c = [CO2]. In exams, units of K are often hidden in the options, so use delta n to check which of the numbers is physically sensible.
Combining reactions and the reaction quotient
Three rules govern K when equations are changed. Reverse the reaction: K_new = 1/K. Multiply the equation by n: K_new = Kⁿ, so halving gives the square root. Add two reactions: K_new = K₁ x K₂. The reaction quotient Q has the same form as K but uses the concentrations (or pressures) at any instant. Compare Q with K: if Q is less than K, the net reaction goes forward; if Q equals K, the system is at equilibrium; if Q is greater than K, the net reaction goes backward. The common trap is to apply Q = K reasoning with initial moles in a flask when delta n is not zero: Q needs concentrations, so the volume must be used. The link to thermodynamics is delta G = delta G(standard) + RT ln Q and delta G(standard) = -RT ln K, so at equilibrium delta G = 0 and K greater than 1 means delta G(standard) is negative.
Le Chatelier shifts and what changes K
Concentration: adding a reactant or removing a product shifts the equilibrium forward; the reverse change shifts it back, and K is unchanged. Pressure by changing volume: compressing a gas mixture favours the side with fewer moles of gas; expanding it favours more; delta n = 0 gives no shift. Temperature: raising it favours the endothermic direction, so K increases when delta H is positive and decreases when delta H is negative; this is the only change that alters K. Inert gas: at constant volume it does not change any concentration, so there is no shift; at constant total pressure the volume grows, partial pressures fall, and the reaction moves towards more moles of gas. Catalyst: speeds both directions equally, so K and the composition are unchanged. Compare Q with K to confirm any direction.
ICE tables, degree of dissociation and solving for x
The standard working is an Initial, Change, Equilibrium table. Write the initial concentrations or moles, put a change of -ax, -bx, +cx, +dx using the stoichiometry, add to get equilibrium values, and substitute into K. For a dissociation A = B + C with degree of dissociation alpha, starting with 1 mol: A = 1 - alpha, B = alpha, C = alpha, total = 1 + alpha. At total pressure P, K_p = alpha² P/(1 - alpha²). For N2O4 = 2NO2, K_p = 4 alpha² P/(1 - alpha²). Remember that the vessel volume changes the concentration unless delta n = 0, in which case it cancels. When the algebra gives a quadratic, solve it exactly and reject the root that makes a concentration negative or larger than the amount available. The approximation 1 - x is about 1 is justified only if K is small and the answer is less than about 5 percent of the initial amount; check the result, not the hope. A perfect-square K (for example 9 or 49 with delta n = 0) is a signal to take the square root of both sides.
Heterogeneous equilibria and what examiners test
In a heterogeneous equilibrium the solid and liquid phases do not appear in K. For CaCO3(s) = CaO(s) + CO2(g), the equilibrium pressure of CO2 is fixed at a given temperature, whatever the amount of solid, provided some of each solid remains. For NH4HS(s) = NH3(g) + H2S(g), K_p = p(NH3) x p(H2S) and if both come only from the solid, each has half the total pressure. Typical JEE Main questions: K_p from K_c with delta n, degree of dissociation from K_p and P, equilibrium amounts from K_c with a quadratic, K for a combination or reverse of reactions, the relation of K to delta G, and the effect of temperature on K (K rises with temperature for an endothermic reaction and falls for an exothermic one). Numerical (integer) answers are common for the amount of product at equilibrium, so practise taking square roots and clean quadratics.
Memory hook
Suppose two canteen counters in your college in Pune are connected by a single door, and students keep walking from the crowded counter to the empty one and back.
- At first many students cross from the crowded side to the empty side, and only a few come back, so the crowd on the empty side grows.
- As the second counter fills up, more students come back, and after some time the number crossing each way per minute is the same.
- The head count on each side now stays fixed, even though individual students are still crossing all the time.
Equilibrium is that steady head count: the two rates are equal, the ratio of the two sides is the constant K, and it is the same wherever you start.
Equal traffic both ways, so the counts stop changing but the movement never stops.
Revision card
Try to answer each without looking above.
- Write K_c for N2 + 3H2 = 2NH3 and state its units.
- Write K_p = K_c (RT)^(delta n) and say how delta n is counted.
- What happens to K when an equation is reversed, doubled, halved, or added to another?
- Write K_p for A = B + C in terms of degree of dissociation and total pressure.
- Which species are left out of K in a heterogeneous equilibrium, and why?
- Does a catalyst change K? Does a change of pressure change K? Give the reason.
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (see content/reviews/scope-audit-2026-11-20.md)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 0; fixed: 0
- Report: content/reviews/learn2-eqm-2026-11-20.md
Textbook references
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.6.2 Predicting the Direction of the Reaction (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.5 Heterogeneous Equilibria (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.2 Equilibrium in Chemical Processes - Dynamic Equilibrium (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.6 Applications of Equilibrium Constants (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.8.5 Effect of a Catalyst (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.8.4 Effect of Temperature Change (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.3 Law of Chemical Equilibrium and Equilibrium Constant (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.6.3 Calculating Equilibrium Concentrations (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.7 Relationship between Equilibrium Constant K, Reaction Quotient Q and Gibbs Energy G (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.8.1 Effect of Concentration Change (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.4.1 Equilibrium Constant in Gaseous Systems (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 6 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
- NCERT Class 11 Chemistry, Equilibrium chapter (read as a reference for scope; content written fresh)
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.