Ionic Equilibrium, pH and Buffers: JEE Main Notes
Reviewed Last updated 2026-11-20. Syllabus topic: Ionic equilibrium, pH and buffers.
In short. pH = -log10 [H+] and Kw = [H+][OH-] = 10⁻14 at 25 C. A weak acid gives [H+] = sqrt(K_a c) when little dissociates; a buffer follows pH = pK_a + log([salt]/[acid]); a sparingly soluble salt is saturated when the ion product equals K_sp.
- pH + pOH = 14 at 25 C, and very dilute strong acids (near 10⁻7 mol/L) must include the H+ from water.
- For a weak acid, K_a = x²/(c - x); use sqrt(K_a c) only when x is under about 5 percent of c, otherwise solve the quadratic.
- K_a x K_b = Kw for a conjugate pair, so pK_a + pK_b = 14 at 25 C.
- A buffer resists pH change; Henderson: pH = pK_a + log([A-]/[HA]), best near a ratio of 1 and a pH within one unit of pK_a.
- Salts hydrolyse by the weaker partner: NH4Cl is acidic, CH3COONa is basic, NaCl is neutral; the common ion lowers the solubility of a sparingly soluble salt.
Syllabus line: EQUILIBRIUM Meaning of equilibrium is the concept of dynamic equilibrium. Equilibria involving physical processes: Solid-liquid, liquid-gas, gas-gas and solid-gas equilibria, Henry's law. General characteristics of equilibrium involving physical processes. Equilibrium involving chemical processes: Law of chemical equilibrium, equilibrium constants (Kp and Kc) and their significance, the significance of delta G and delta G standard in chemical equilibrium, factors affecting equilibrium concentration, pressure, temperature, the effect of catalyst, Le Chatelier's principle. Ionic equilibrium: Weak and strong electrolytes, ionization of electrolytes, various concepts of acids and bases (Arrhenius, Bronsted - Lowry and Lewis) and their ionization, acid-base equilibria (including multistage ionization) and ionization constants, ionization of water, pH scale, common ion effect, hydrolysis of salts and pH of their solutions, the solubility of sparingly soluble salts, solubility products and buffer solutions. (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 6 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Chemical equilibrium and the equilibrium constant: K_a, K_b and K_sp are equilibrium constants worked with ICE tables. Read this first if ICE tables and quadratics are new.
- Some basic concepts of chemistry (lesson planned): Molarity and mole calculations feed every pH problem. Read this first if you cannot convert grams or millilitres to mol/L.
- Le Chatelier principle and reaction quotient: The common ion effect is a Le Chatelier shift. Read this first if shifts caused by adding an ion are unclear.
Related topics
- Chemical equilibrium and the equilibrium constant
- Le Chatelier principle and reaction quotient
- Some Basic Concepts of Chemistry (lesson planned)
The concept step by step
Step 1: Strong and weak electrolytes, and three ideas of acid and base
A strong electrolyte (HCl, NaOH, NaCl) is taken as fully ionised in water; a weak electrolyte (CH3COOH, NH3) ionises only partly and sets up an equilibrium between molecules and ions, so it has an ionisation constant. Arrhenius: an acid gives H+ and a base gives OH- in water. Bronsted-Lowry: an acid is a proton donor and a base a proton acceptor, each acid having a conjugate base. Lewis: an acid accepts an electron pair (BF3, H+) and a base donates one (NH3, OH-); every Arrhenius or Bronsted base is also a Lewis base.
Step 2: Water ionises a little, and pH is a log scale
Pure water ionises slightly: H2O = H+ + OH-. At 25 C the product [H+][OH-] equals Kw = 1.0 x 10⁻14 (mol/L)², so in pure water each is 10⁻7 mol/L. pH is defined as -log10 [H+] and pOH as -log10 [OH-], so pH + pOH = 14 at 25 C. A change of one pH unit means a tenfold change in [H+]. Acidic means pH below 7, basic means above 7 (at 25 C only).
Step 3: Strong acids and bases dissociate fully
HCl, HNO3 and NaOH are taken as completely dissociated, so [H+] equals the acid concentration times the number of H+ it gives, and [OH-] equals the base concentration times the number of OH- it gives. Example: 0.050 mol/L Ba(OH)2 gives [OH-] = 0.10 mol/L, pOH = 1, pH = 13. For acid concentrations near 10⁻7 mol/L the water's own H+ cannot be ignored; use [H+] = c + Kw/[H+] and solve.
Step 4: Weak acids and bases ionise only partly
For HA = H+ + A-, K_a = [H+][A-]/[HA]. Start with concentration c and let x ionise: K_a = x²/(c - x). If x is much smaller than c (below about 5 percent), then x = sqrt(K_a c) and the degree of ionisation is alpha = sqrt(K_a/c). Otherwise solve x² + K_a x - K_a c = 0 and keep the positive root. Dilution increases alpha (Ostwald dilution law) but lowers [H+]. For a weak base use K_b and [OH-] in the same way. Common ion effect on a weak acid: adding its salt (CH3COONa to CH3COOH) raises [A-], shifts HA = H+ + A- backwards and lowers [H+] and alpha; with salt in excess [H+] = K_a [HA]/[A-].
Step 5: Conjugate pairs and acid strength
When an acid HA loses H+ it leaves its conjugate base A-. The two are linked by K_a x K_b = Kw, so pK_a + pK_b = 14 at 25 C. A stronger acid has a larger K_a (smaller pK_a) and a weaker conjugate base. For a polybasic acid like H2CO3 or H3PO4 each step has its own constant, and K_a1 is much greater than K_a2, so nearly all the H+ comes from the first step. Worked pattern: for 0.10 mol/L of a diprotic acid H2X with K_a1 = 4.0 x 10⁻7 and K_a2 = 4.0 x 10⁻11 (mol/L), [H+] = sqrt(K_a1 c) = 2.0 x 10⁻4 mol/L (pH 3.70) and [X2-] = K_a2 = 4.0 x 10⁻11 mol/L, because the second step adds almost no H+.
Step 6: Salt hydrolysis and buffers
A salt of a strong acid and weak base (NH4Cl) hydrolyses to give H+, so its solution is acidic: x²/(c - x) = Kw/K_b. A salt of a weak acid and strong base (CH3COONa) gives OH-, so it is basic. A mixture of a weak acid and its salt (or weak base and its salt) is a buffer. The weak acid neutralises added base, the conjugate base neutralises added acid, so the pH changes only slightly. Henderson: pH = pK_a + log([A-]/[HA]).
Step 7: Common ion effect and solubility product
For a sparingly soluble salt such as AgCl, K_sp = [Ag+][Cl-] at saturation. In pure water s = sqrt(K_sp). If a common ion is already present (0.10 mol/L Cl- from NaCl), the product s(s + 0.10) must still equal K_sp, so s is far smaller. A precipitate forms when the ion product (Q) exceeds K_sp, and none forms when Q is below K_sp. For M(OH)2 the condition is [M2+][OH-]² = K_sp, which gives the pH at which precipitation begins.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
Find the pH of 0.010 mol/L HCl at 25 C (Kw = 1.0 x 10⁻14).
| Step | Marks |
|---|---|
| HCl is a strong acid, so [H+] = 0.010 mol/L (water's contribution is negligible). | 1 |
| pH = -log10 (1.0 x 10⁻2). | 1 |
| pH = 2.00. | 1 |
| Total: 3 marks | 3 |
Answer: pH = 2.00
Fast method: For a concentration written as 1 x 10⁻n mol/L of a strong monoprotic acid, pH equals n.
Sanity check: pH is dimensionless; a 0.01 mol/L strong acid being well below 7 is expected. The water term Kw/[H+] = 10⁻12 mol/L is negligible next to 0.010.
Example 2 (medium)
Find the pH and the degree of ionisation of 0.10 mol/L CH3COOH with K_a = 1.8 x 10⁻5 mol/L, solving the quadratic exactly.
| Step | Marks |
|---|---|
| K_a = x²/(0.10 - x), which gives x² + 1.8 x 10⁻5 x - 1.8 x 10⁻6 = 0. | 1 |
| x = [-1.8e-5 + sqrt((1.8e-5)² + 4 x 1.8e-6)]/2 = 1.333 x 10⁻3 mol/L (positive root). | 2 |
| pH = -log10 (1.333 x 10⁻3) = 2.875 and alpha = x/c = 1.33 x 10⁻2, about 1.3 percent. | 1 |
| Total: 4 marks | 4 |
Answer: pH about 2.88; alpha about 0.0133 (1.33 percent)
Fast method: x = sqrt(K_a c) = sqrt(1.8e-6) = 1.34e-3; the error is under 1 percent because alpha is about 1 percent, so the shortcut is safe.
Sanity check: alpha is about 1 percent, well below the 5 percent limit, so the sqrt(K_a c) shortcut agrees with the exact answer (1.342e-3 against 1.333e-3). A pH between 2 and 3 matches a weak acid at 0.10 mol/L.
Example 3 (medium)
Find the pH of 0.10 mol/L NH4Cl. K_b of NH3 is 1.8 x 10⁻5 mol/L and Kw = 1.0 x 10⁻14.
| Step | Marks |
|---|---|
| NH4+ is the conjugate acid of NH3: K_a = Kw/K_b = 1.0e-14/1.8e-5 = 5.56 x 10⁻10 mol/L. | 1 |
| NH4+ + H2O = NH3 + H3O+: x²/(0.10 - x) = 5.56e-10, and x is tiny, so x = sqrt(5.56e-10 x 0.10) = 7.45 x 10⁻6 mol/L. | 1 |
| pH = -log10 (7.45 x 10⁻6) = 5.13. | 1 |
| Total: 3 marks | 3 |
Answer: pH about 5.13 (acidic)
Fast method: pH = 7 - (1/2)(pK_b + log c) = 7 - (1/2)(4.745 - 1) = 5.13.
Sanity check: A salt of a strong acid and a weak base must give pH below 7; 5.13 does. The hydrolysed fraction is 7.45e-6/0.10 = 7.5e-5, so the small-x assumption is valid.
Example 4 (medium, multi-step)
A 1.0 L buffer contains 0.10 mol CH3COOH and 0.10 mol CH3COONa (K_a = 1.8 x 10⁻5 mol/L). Find the pH after 0.020 mol of NaOH is added (no volume change).
| Step | Marks |
|---|---|
| NaOH reacts completely with the weak acid: CH3COOH + OH- gives CH3COO- + H2O. | 1 |
| New amounts: CH3COOH = 0.10 - 0.020 = 0.080 mol; CH3COO- = 0.10 + 0.020 = 0.120 mol. | 2 |
| pK_a = -log10 (1.8e-5) = 4.745; pH = 4.745 + log10 (0.120/0.080) = 4.745 + 0.176. | 2 |
| pH = 4.92. | 1 |
| Total: 6 marks | 6 |
Answer: pH about 4.92 (it was 4.74 before the addition)
Fast method: Update the two mole amounts by neutralisation, then add the log of their ratio to pK_a. Volume is not needed because it cancels.
Sanity check: Adding a strong base raised the pH by only 0.18, whereas 0.020 mol NaOH in 1 L of water would give pH 12.3. The ratio 1.5 gives log 0.176, consistent with a mild change.
Example 5 (hard)
Find the pH of 1.0 x 10⁻8 mol/L HCl at 25 C (Kw = 1.0 x 10⁻14).
| Step | Marks |
|---|---|
| Total [H+] = acid contribution + water contribution. Water gives [OH-] = Kw/[H+], and this equals the extra H+ from water. | 1 |
| Charge balance: [H+] = 1.0e-8 + Kw/[H+], which gives [H+]² - 1.0e-8 [H+] - 1.0e-14 = 0. | 2 |
| [H+] = (1.0e-8 + sqrt(1.0e-16 + 4.0e-14))/2 = 1.05 x 10⁻7 mol/L. | 1 |
| pH = -log10 (1.05 x 10⁻7) = 6.98. | 1 |
| Total: 5 marks | 5 |
Answer: pH about 6.98 (slightly acidic, not 8)
Fast method: When the acid concentration is within a factor of about 100 of 1e-7 mol/L, use [H+] = (c + sqrt(c² + 4Kw))/2 directly.
Sanity check: Limit checks: for large c the formula gives [H+] = c; for c = 0 it gives 1.0e-7 and pH 7. An acid solution has pH below 7, and 6.98 is just below.
Example 6 (hard, multi-step)
A solution contains 0.010 mol/L Mg2+. K_sp of Mg(OH)2 is 1.2 x 10⁻11 (mol/L)³ and Kw = 1.0 x 10⁻14. At what pH does Mg(OH)2 just begin to precipitate?
| Step | Marks |
|---|---|
| Precipitation begins when the ion product equals K_sp: [Mg2+][OH-]² = 1.2 x 10⁻11. | 1 |
| [OH-]² = 1.2e-11/0.010 = 1.2e-9, so [OH-] = 3.46 x 10⁻5 mol/L. | 1 |
| pOH = -log10 (3.46e-5) = 4.46. | 1 |
| pH = 14 - 4.46 = 9.54; above this pH Mg(OH)2 precipitates. | 1 |
| Total: 4 marks | 4 |
Answer: pH about 9.54
Fast method: [OH-] = sqrt(K_sp/[Mg2+]); take the log to get pOH and subtract it from 14.
Sanity check: Units: (mol/L)³ divided by mol/L gives (mol/L)², whose root is mol/L. Limit: a lower [Mg2+] needs a higher [OH-], so a higher pH, as expected; 9.54 is weakly basic, plausible for a hydroxide with a small K_sp.
Example 7 (medium)
To 1.0 L of 0.10 mol/L CH3COOH (K_a = 1.8 x 10⁻5 mol/L) 0.10 mol of solid CH3COONa is added with no volume change. Find the pH and the degree of ionisation of the acid, and compare with the acid alone (pH 2.88, alpha 0.0133).
| Step | Marks |
|---|---|
| Let x ionise: K_a = x(0.10 + x)/(0.10 - x) because [A-] starts at 0.10 mol/L from the salt. | 1 |
| x is tiny next to 0.10, so [H+] = K_a x 0.10/0.10 = 1.8 x 10⁻5 mol/L. | 1 |
| pH = -log10 (1.8e-5) = 4.74. | 1 |
| alpha = x/c = 1.8e-5/0.10 = 1.8 x 10⁻4, about 74 times smaller than 0.0133; pH rises from 2.88 to 4.74. | 1 |
| Total: 4 marks | 4 |
Answer: pH about 4.74; alpha about 1.8 x 10⁻4
Fast method: With equal acid and salt amounts [H+] = K_a, so pH = pK_a = 4.745.
Sanity check: Limiting case: salt amount zero recovers the acid alone (pH 2.88); equal amounts give pH = pK_a. The pH rose, as a common ion lowering ionisation requires; alpha is dimensionless.
Example 8 (medium, multi-step)
Multistage ionisation: a diprotic acid H2X has K_a1 = 4.0 x 10⁻7 mol/L and K_a2 = 4.0 x 10⁻11 mol/L. For 0.10 mol/L H2X find the pH and [X2-].
| Step | Marks |
|---|---|
| The first step H2X = H+ + HX- dominates: [H+] = sqrt(K_a1 c) = sqrt(4.0e-7 x 0.10) = 2.0 x 10⁻4 mol/L. | 2 |
| pH = -log10 (2.0e-4) = 3.70. | 1 |
| In the second step [H+] is about [HX-], so [X2-] = K_a2 [HX-]/[H+] = K_a2 = 4.0 x 10⁻11 mol/L. | 2 |
| pH = 3.70 and [X2-] = 4.0 x 10⁻11 mol/L. | 1 |
| Total: 6 marks | 6 |
Answer: pH about 3.70; [X2-] about 4.0 x 10⁻11 mol/L
Fast method: Use only K_a1 for pH, then [X2-] = K_a2 when [H+] equals [HX-].
Sanity check: K_a2 is 10⁴ times smaller than K_a1, so the second step adds under 0.1 percent of H+ and ignoring it is safe; [X2-] is far below [HX-] as expected.
Example 9 (easy)
Lewis acids and bases: among BF3, NH3, Ag+, OH-, Cl- and H2O, how many are Lewis acids (electron-pair acceptors) and how many are Lewis bases (electron-pair donors)?
| Step | Marks |
|---|---|
| A Lewis acid has an empty orbital to accept a pair: BF3 (incomplete octet) and Ag+ (empty orbital). | 1 |
| A Lewis base has a lone pair to donate: NH3, OH-, Cl- and H2O. | 1 |
| Count: 2 Lewis acids (BF3, Ag+) and 4 Lewis bases. | 1 |
| Total: 3 marks | 3 |
Answer: 2 Lewis acids and 4 Lewis bases
Fast method: Positive ions and electron-deficient molecules accept pairs; anions and molecules with lone pairs donate.
Sanity check: Every species is classified once and the counts add to 6; BF3 + NH3 forming F3B-NH3 is the standard acid-base pairing, with no proton involved.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Ionic product of water | Kw = [H+][OH-] = 1.0 x 10⁻14 at 25 C | Dilute aqueous solution at 25 C only | (mol/L)² | Example 3 |
| pH and pOH | pH = -log10 [H+]; pOH = -log10 [OH-]; pH + pOH = 14 | Dilute aqueous solution at 25 C for pH + pOH = 14 | dimensionless | Example 1 |
| Weak acid | K_a = c alpha²/(1 - alpha); [H+] = sqrt(K_a c) if alpha under 5 percent | Weak monoprotic acid; shortcut only if alpha is under 5 percent | K_a in mol/L; c in mol/L | Example 2 |
| Conjugate pair | K_a x K_b = Kw; pK_a + pK_b = 14 | Conjugate acid-base pair in water at 25 C | (mol/L)² for the product | Example 3 |
| Hydrolysis constant | K_h = Kw/K_a (anion) or Kw/K_b (cation); h = sqrt(K_h/c) | Salt of a weak acid or base in water; h small for the shortcut | mol/L | Example 3 |
| Henderson equation | pH = pK_a + log10 ([A-]/[HA]); pOH = pK_b + log10 ([BH+]/[B]) | Buffer of weak acid and its salt (or base and its salt), ratio about 0.1 to 10 | dimensionless | Example 4 |
| Solubility product | K_sp = [A]ˣ [B]^y; AgCl: s = sqrt(K_sp); Mg(OH)2: s = (K_sp/4)^(1/3) | Sparingly soluble salt in water; ions in saturated solution | (mol/L)^(x+y) | Example 6 |
| Common ion | K_sp = s (s + c) for AgCl with c of Cl-; s about K_sp/c if s much less than c | Sparingly soluble 1:1 salt with a common ion; shortcut needs s much less than c | mol/L | none |
| Precipitation condition | ion product Q greater than K_sp: precipitate forms | Compare the ion product with K_sp at the same temperature | same as K_sp | Example 6 |
Common mistakes and speed
- Averaging pH values, or using pH = 14 minus pH of the mixed acid, when mixing acids and bases. Why it tempts: pH is a number on a scale like temperature, so averaging feels natural; but pH is logarithmic and mixing must be done with moles of H+ and OH-.
- Giving pH above 7 for a very dilute acid such as 10⁻8 mol/L HCl. Why it tempts: Straight application of pH = -log c gives 8 without a glance at the water term.
- Using sqrt(K_a c) when the degree of ionisation is not small. Why it tempts: The shortcut is quick and works in most textbook cases, so its limit is forgotten when K_a/c is not tiny.
- Using the Henderson equation on the mixed amounts without first neutralising the added strong acid or base. Why it tempts: The stem gives the original amounts of acid and salt, so the ratio of those looks like the final answer.
- Writing K_sp for M(OH)2 as [M][OH] or finding s from K_sp = s². Why it tempts: The formula for AgCl is memorised first and gets reused where the stoichiometry is 1 : 2.
- Taking NH4Cl or CH3COONa as neutral because they are salts. Why it tempts: Salts are associated with neutralisation, but the ion of the weak parent acid or base reacts with water.
Time per question and fast method
Target: about 120 seconds per question.
Classify first: strong acid or base (direct log), weak acid or base (sqrt(K_a c) after checking alpha is under 5 percent), salt (decide acidic or basic from the parent acid and base), mixture (neutralise moles first, then buffer if both a weak acid and its conjugate base remain). Use Henderson with mole ratios, and for K_sp write the ion product before any arithmetic.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 5 correct. Pick an option for each question.
Practice
- At 298 K, take log 2 = 0.30 and K_w = 1.0 x 10⁻14. The pH of a 1.0 x 10⁻3 M aqueous solution of Ba(OH)2,… Verified (T1)
- At 298 K with K_w = 1.0 x 10⁻14, the pH of 1.0 x 10⁻8 M HCl, taking the ionisation of water into account, is Verified (T1)
- A 100 mL buffer contains 0.10 M CH3COOH and 0.20 M CH3COONa. K_a of acetic acid is 1.8 x 10⁻5 and K_w = 1.0 x… Verified (T1)
- K_sp of Ag2CrO4 is 3.2 x 10⁻11 at 298 K. Its solubility in 0.010 M Na2CrO4 solution, in mol/L, is closest to Verified (T1)
- At 298 K, 600 mL of 0.0050 M Ba(OH)2 is mixed with 400 mL of 0.0125 M HCl. Assuming volumes are additive and… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Acids, bases, water and the pH scale
Arrhenius: acids give H+ and bases give OH- in water. Bronsted-Lowry: an acid is a proton donor and a base is a proton acceptor, and every acid has a conjugate base (HCl and Cl-, NH4+ and NH3, H2O and OH-). Lewis: an acid is an electron-pair acceptor and a base a donor. Water is amphoteric. The ionic product Kw = [H+][OH-] = 1.0 x 10⁻14 (mol/L)² at 25 C rises with temperature, so neutral pH is below 7 above 25 C. pH = -log10 [H+]; pH + pOH = pKw = 14 at 25 C. Mixing: first find the moles of H+ and OH- and neutralise them, then divide the excess by the total volume; do not average the pH values. Dilution of a strong acid by a factor of 10 raises the pH by 1 only while [H+] stays well above 10⁻7 mol/L; no acid diluted ever has pH above 7. Note on scope: the pH of a weak acid with its salt added (common ion effect on a weak acid) is an application of the ionisation equilibrium and the same Henderson result; the exact Ostwald dilution law and the Henderson equation are standard shortcuts, not separate syllabus items.
Weak acids and bases, degree of ionisation
For HA with concentration c, K_a = c alpha²/(1 - alpha). If alpha is small, K_a = c alpha², so alpha = sqrt(K_a/c) and [H+] = c alpha = sqrt(K_a c); pH = (1/2)(pK_a - log c). The small-alpha approximation fails when K_a/c is not tiny, for example 0.0010 mol/L of an acid with K_a = 1.0 x 10⁻4; solve the quadratic and reject the negative root. For a weak base B, K_b = c alpha²/(1 - alpha), [OH-] = sqrt(K_b c). Ostwald dilution: alpha increases as c decreases, and at infinite dilution alpha tends to 1. The comparison of acid strength uses K_a (larger is stronger), not [H+] of solutions of different concentration. For polyprotic acids, ignore the second ionisation when estimating pH unless K_a2 is comparable to K_a1; [A2-] in a solution of only H2A is about equal to K_a2.
Hydrolysis of salts
A salt of a strong acid and strong base (NaCl, KNO3) does not hydrolyse and gives pH 7 at 25 C. A salt of a weak acid and strong base (CH3COONa) hydrolyses: A- + H2O = HA + OH-, with K_h = Kw/K_a, h = sqrt(K_h/c), [OH-] = sqrt(K_h c), pH = 7 + (1/2)(pK_a + log c). A salt of a strong acid and weak base (NH4Cl) gives BH+ + H2O = B + H3O+, K_h = Kw/K_b, [H+] = sqrt(K_h c), pH = 7 - (1/2)(pK_b + log c). For a salt of a weak acid and weak base the pH is about 7 + (1/2)(pK_a - pK_b), independent of concentration to a good approximation. Warning: the formulas for [H+] and [OH-] are valid for a single hydrolysing ion with small h; for very dilute solutions or large K_h solve the quadratic.
Buffer solutions and the Henderson equation
An acidic buffer is a weak acid with its salt (CH3COOH with CH3COONa); a basic buffer is a weak base with its salt (NH3 with NH4Cl). Henderson-Hasselbalch: pH = pK_a + log([salt]/[acid]); for a basic buffer pOH = pK_b + log([salt]/[base]). After adding strong acid or base, update the moles by neutralisation first: base added converts HA into A- mole for mole; acid added converts A- into HA. Use the ratio of moles, since the volume cancels. Buffer capacity is greatest when [A-] = [HA], pH = pK_a, and the useful range is pK_a plus or minus 1. Dilution of a buffer by water leaves the ratio, hence the pH, nearly unchanged. The Henderson equation is an approximation: it assumes the equilibrium amounts equal the amounts mixed, which fails for very dilute buffers or for a ratio far from 1.
Solubility product, common ion effect and what examiners test
For AxBy = x A(y+) + y B(x-) the solubility product is K_sp = [A]ˣ [B]^y at saturation, and s is found from K_sp = xˣ y^y s^(x+y). For AgCl s = sqrt(K_sp); for Mg(OH)2 K_sp = 4s³. A common ion lowers s; to find s in a solution containing the common ion at concentration c, use K_sp = s x (s + c) and approximate s + c by c only when s is far smaller than c. Precipitation occurs when the ion product exceeds K_sp. A salt's solubility depends on temperature; K_sp does not change with concentration. Typical JEE Main items: pH of a strong acid or base mixture, pH of a weak acid with the quadratic, the buffer pH after adding acid or base, the pH of a hydrolysing salt, relation of K_a and K_b, solubility with a common ion, and the pH at which a hydroxide precipitates. Check the stem for constants such as Kw = 1.0 x 10⁻14 and log 2 = 0.30 before using them. Remember that K_sp, like any equilibrium constant, changes only with temperature, not with the concentrations.
Memory hook
Suppose your family in Nagpur keeps a steel bucket of water that is slightly sour from a few drops of lemon, and you want to keep the sourness roughly steady while guests keep adding either more lemon or soda.
- If the bucket is only plain water with lemon, one extra spoon of lemon juice makes it noticeably more sour, and one spoon of soda makes it noticeably less sour.
- Now suppose the bucket also holds a pair of ingredients that work against each other: one soaks up sourness when more lemon goes in, and the other releases sourness when soda goes in. Chemists use acetic acid together with sodium acetate for exactly this job.
- The taste hardly moves while both parts of the mix are present in similar amounts, and it moves a lot only when one of the two runs out.
A buffer is the weak acid and its conjugate base together: one part absorbs added base, the other absorbs added acid, so pH changes only slightly until one part is used up.
A buffer is a pair, an acid to answer the base and a base to answer the acid.
Revision card
Try to answer each without looking above.
- State Kw at 25 C and the relations between pH, pOH and pKw.
- When can sqrt(K_a c) be used for [H+], and what do you do when it cannot?
- State K_a x K_b = Kw and use it to find the pH of a salt of a weak base.
- Write the Henderson equation and say when buffer capacity is greatest.
- How do you update the buffer amounts after adding a strong acid or strong base?
- Write K_sp for AgCl and for Mg(OH)2 and say how a common ion changes solubility.
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (see content/reviews/scope-audit-2026-11-20.md)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 0; fixed: 0
- Report: content/reviews/learn2-eqm-2026-11-20.md
Textbook references
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.11.5 Relation between Ka and Kb (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.10.1 Arrhenius Concept of Acids and Bases (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.11.3 Ionization Constants of Weak Acids (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.11.9 Hydrolysis of Salts and the pH of their Solutions (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.12 Buffer Solutions (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.12.1 Designing Buffer Solution (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.13.1 Solubility Product Constant (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.11.8 Common Ion Effect in the Ionization of Acids and Bases (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.11.1 The Ionization Constant of Water and its Ionic Product (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.11.2 The pH Scale (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 6 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
- NCERT Class 11 Chemistry, Equilibrium chapter (read as a reference for scope; content written fresh)
- Standard results: Henderson equation, K_h = Kw/K_a, and K_sp relations; textbook section reference pending
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.