EngineeringRise

Phenols and Carboxylic Acids: Acidity and Reactions

Reviewed Last updated 2026-11-20. Syllabus topic: Phenols and carboxylic acids: acidity and reactions.

In short. Phenol is weakly acidic (stronger than alcohols and water, weaker than carboxylic acids) because the phenoxide ion is resonance stabilised. Withdrawing groups strengthen phenols and acids; donor groups weaken them. The ring is strongly activated: ortho and para halogenation, nitration, sulphonation, and Reimer-Tiemann formylation.

  • Acid strength follows the stability of the conjugate base: RCOOH > phenols > water and alcohols.
  • Phenols: -NO2 (ortho or para) and -Cl strengthen, -CH3 and -OCH3 weaken; the p-nitro group acts by -I and -R together.
  • Carboxylic acids: electron-withdrawing groups near the COOH group increase strength, the effect falls with distance; HCOOH is stronger than CH3COOH.
  • Phenol with bromine water gives 2,4,6-tribromophenol; with conc. HNO3 gives 2,4,6-trinitrophenol; dilute HNO3 gives ortho and para nitrophenols.
  • Reimer-Tiemann: phenol, CHCl3, aqueous NaOH, then acid, gives salicylaldehyde (2-hydroxybenzaldehyde) via dichlorocarbene.

Syllabus line: ORGANIC COMPOUNDS CONTAINING OXYGEN General methods of preparation, properties, reactions and uses. ALCOHOLS, PHENOLS AND ETHERS Alcohols: Identification of primary, secondary and tertiary alcohols, mechanism of dehydration. Phenols: Acidic nature, electrophilic substitution reactions, halogenation, nitration and sulphonation, Reimer - Tiemann reaction. Ethers: Structure. Aldehyde and Ketones: Nature of carbonyl group, nucleophilic addition to >C=O group, relative reactivities of aldehydes and ketones, important reactions such as - Nucleophilic addition reactions (addition of HCN, NH3 and its derivatives), Grignard reagent, oxidation, reduction (Wolf Kishner and Clemmensen), the acidity of -hydrogen. Aldol condensation, Cannizzaro reaction, Haloform reaction, chemical tests to distinguish between aldehydes and ketones. Carboxylic Acids: Acidic strength and factors affecting it. (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 17 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

Related topics

The concept step by step

  1. Step 1: Why phenol is acidic

    Phenol, C6H5OH, loses H+ to give the phenoxide ion C6H5O(-). The negative charge on oxygen is delocalised into the ring (it appears on the ortho and para carbons in the resonance structures), which stabilises the ion. In an alcohol the alkoxide ion has no such delocalisation, and the alkyl group even pushes electrons towards the oxygen, so alcohols are weaker acids than phenol. Phenol dissolves in aqueous NaOH but not in aqueous sodium hydrogencarbonate.

  2. Step 2: Substituents on the ring

    Electron-withdrawing groups (nitro, halogen) stabilise the phenoxide ion and strengthen the acid; electron-donating groups (methyl, methoxy) destabilise it and weaken the acid. Position matters: nitro at ortho or para withdraws by both the -I and -R effects and the charge can sit on the nitro group, so these isomers are stronger than meta, where only -I operates. 2,4,6-Trinitrophenol (picric acid) is a strong acid for this reason.

  3. Step 3: Why carboxylic acids are stronger

    A carboxylate ion RCOO(-) shares its charge equally between two oxygen atoms, which is a better stabilisation than spreading it over a ring with carbon atoms. So carboxylic acids ionise to a much larger extent than phenols and dissolve in sodium hydrogencarbonate with release of carbon dioxide, which phenols do not. The order is RCOOH > phenol > water and alcohols (water and simple alcohols are close in strength, so exam items do not ask to rank them against each other).

  4. Step 4: Factors affecting acid strength

    Electron-withdrawing groups on the alkyl chain increase strength by the -I effect: CCl3COOH > CCl2HCOOH > CClH2COOH > CH3COOH. The effect weakens with distance from COOH (2-chlorobutanoic acid is stronger than 4-chlorobutanoic acid). Alkyl groups (+I) decrease strength, so HCOOH is stronger than CH3COOH. In benzoic acids a para donor lowers strength and an ortho substituent usually raises it (ortho effect).

  5. Step 5: Electrophilic substitution of phenol

    The OH group activates the ring and directs to ortho and para positions. Bromine water gives 2,4,6-tribromophenol (white precipitate) with no catalyst. Bromine in carbon disulphide at low temperature gives mainly para- and ortho-bromophenol. Dilute nitric acid gives ortho- and para-nitrophenol; concentrated nitric acid with sulphuric acid gives 2,4,6-trinitrophenol. Sulphonation with concentrated sulphuric acid gives mainly ortho at about room temperature and para at higher temperature.

  6. Step 6: Reimer-Tiemann reaction

    Phenol is heated with chloroform and aqueous sodium hydroxide, then acidified. Hydroxide and chloroform generate dichlorocarbene, :CCl2, an electrophile that attacks the ortho position of the phenoxide ion; hydrolysis of the CHCl2 group gives CHO. The main product is salicylaldehyde (2-hydroxybenzaldehyde), with a little para isomer. With CCl4 in place of CHCl3 the product would be salicylic acid.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

Phenol (4.7 g) is treated with excess bromine water. Find the mass of 2,4,6-tribromophenol formed on complete conversion.

Marks-style solution of example 1
StepMarks
C6H5OH giving C6H2Br3OH: 1 mol phenol gives 1 mol product.1
Moles of phenol = 4.7 / 94.11 = 0.0499 mol.1
Mass = 0.0499 x 330.8 = 16.5 g.1
Total: 3 marks3

Answer: 16.5 g

Fast method: Phenol about 94 g per mole, product about 331: 4.7 x 331/94 = 16.5.

Sanity check: Product mass is 3.5 times phenol mass; three Br (240 g per mole) added to 94 g per mole is consistent.

Example 2 (easy)

Suppose the acid dissociation constants are Ka = 1.4 x 10⁻3 mol per litre for chloroacetic acid and 1.8 x 10⁻5 mol per litre for acetic acid. How many times stronger is chloroacetic acid, and by how many pKa units?

Marks-style solution of example 2
StepMarks
Ratio of Ka = 1.4 x 10⁻3 / 1.8 x 10⁻5 = 77.8.1
pKa difference = log10(77.8) = 1.89 units.1
Chloroacetic acid is about 78 times stronger (pKa lower by 1.89).1
Total: 3 marks3

Answer: about 78 times; pKa lower by 1.89

Fast method: Divide the Ka values; log of the ratio gives the pKa gap.

Sanity check: The Cl atom (-I effect) strengthens the acid, so the ratio must exceed 1 and the pKa gap must be positive: both agree.

Example 3 (medium)

A 0.10 mol per litre solution of acetic acid has Ka = 1.8 x 10⁻5 mol per litre. Find the percentage ionised.

Marks-style solution of example 3
StepMarks
Let x mol per litre ionise: Ka = x² / (0.10 - x).1
Solve x² + 1.8 x 10⁻5 x - 1.8 x 10⁻6 = 0, giving x = 1.33 x 10⁻3 mol per litre.2
Percentage ionised = 1.33 x 10⁻3 / 0.10 x 100 = 1.33 percent.1
Total: 4 marks4

Answer: 1.33 percent

Fast method: alpha = square root of (Ka / C) = square root of 1.8 x 10⁻4 = 1.34 percent.

Sanity check: A weak acid at 0.10 mol per litre should be ionised by only a small percentage; 1.3 percent agrees, and the approximation 0.10 - x of 0.10 is valid.

Example 4 (medium)

Phenol (9.4 g) is nitrated with concentrated nitric acid and sulphuric acid to 2,4,6-trinitrophenol (picric acid), complete conversion. Find its mass, and compare with the mass of the mononitro product if dilute acid were used.

Marks-style solution of example 4
StepMarks
Moles of phenol = 9.4 / 94.11 = 0.0999 mol.1
Picric acid C6H3N3O7 (229.1 g per mol): 0.0999 x 229.1 = 22.9 g.2
Mononitrophenol C6H5NO3 (139.1 g per mol) would be 13.9 g, so the conditions change the answer.1
Total: 4 marks4

Answer: 22.9 g of picric acid (13.9 g if only one nitro group)

Fast method: Tenth of a mole times 229 g per mole = 22.9 g.

Sanity check: Each NO2 replaces H and adds 45 g per mole: 94 + 3 x 45 = 229, consistent.

Typical trap: Using one nitro group (dilute acid at low temperature) when the stem says concentrated HNO3 with H2SO4: conditions decide how many groups enter.

Example 5 (medium, multi-step)

Phenol (9.4 g) undergoes the Reimer-Tiemann reaction to give salicylaldehyde in 50 percent yield. Find the mass of the aldehyde.

Marks-style solution of example 5
StepMarks
One phenol gives one salicylaldehyde (C7H6O2, 122.1 g per mol).1
Moles of phenol = 9.4 / 94.11 = 0.0999 mol; theoretical mass = 0.0999 x 122.1 = 12.2 g.2
At 50 percent yield mass = 6.1 g.1
Total: 4 marks4

Answer: 6.1 g

Fast method: A tenth of a mole at 122 g per mole is 12.2 g; half of that is 6.1 g.

Sanity check: Product mass 6.1 g is less than the 9.4 g of phenol only because of the 50 percent yield; the theoretical 12.2 g exceeds 9.4 g as CHO is added.

Example 6 (hard, multi-step)

Among benzoic acid, o-nitrobenzoic acid, m-nitrobenzoic acid, p-nitrobenzoic acid and p-methoxybenzoic acid, how many are stronger acids than benzoic acid, and which is the strongest and which the weakest?

Marks-style solution of example 6
StepMarks
Nitro is electron-withdrawing (-I, and -R at ortho and para) and stabilises the benzoate ion, so all three nitrobenzoic acids are stronger than benzoic acid.1
p-Methoxy donates by +R, which outweighs its -I at the para position, so p-methoxybenzoic acid is weaker than benzoic acid.1
The ortho isomer is strongest because of the ortho effect (steric twisting of the COOH out of the ring plane plus the close -I effect). The meta and para nitro acids are close to each other, and both lie below the ortho acid.2
Count of acids stronger than benzoic acid = 3; strongest o-nitro; weakest p-methoxy.1
Total: 5 marks5

Answer: 3 stronger than benzoic acid; strongest o-nitrobenzoic acid, weakest p-methoxybenzoic acid

Fast method: Withdrawing group: stronger; donor at para: weaker; any ortho substituent: strongest; do not try to separate meta from para.

Sanity check: pKa shifts are of order 0.3 to 2 units (a factor of about 2 to 100 in Ka), so the ordering is a modest shift around benzoic acid, not orders of magnitude.

Typical trap: Ranking the para-nitro acid above the ortho-nitro acid: ortho carries the ortho effect and is strongest; meta and para are close; para-methoxy is below benzoic acid.

Example 7 (medium, multi-step)

A 0.45 g sample of a pure dicarboxylic acid needs 10.0 mL of 1.00 mol per litre NaOH for complete neutralisation. Find its molar mass.

Marks-style solution of example 7
StepMarks
Moles of NaOH = 0.0100 L x 1.00 = 0.0100 mol.1
A dicarboxylic acid reacts with 2 mol NaOH per mol, so moles of acid = 0.0050 mol.2
Molar mass = 0.45 / 0.0050 = 90 g per mol (oxalic acid, 90.0).1
Total: 4 marks4

Answer: 90 g per mol

Fast method: Equivalent mass = 0.45 / 0.0100 = 45 g; multiply by 2 for a dibasic acid.

Sanity check: HOOC-COOH has molar mass 2 x 12.011 + 2 x 15.999 x 2 + 2 x 1.008 = 90.0, matching the result.

Typical trap: Treating the acid as monobasic gives 45 g per mol; the dibasic nature doubles the molar mass.

Formulas and units

Formula and unit box for Phenols and carboxylic acids: acidity and reactions
ResultFormulaValid whenUnits or noteWorked example
Acid strength orderRCOOH > phenol > water, alcohols (water and the simple alcohols are close together; do not rank them against each other)not applicablen/a (order)none
Phenols with substituentsp-NO2 > m-NO2 > H > p-CH3not applicablen/a (order)none
Haloacetic acidsCCl3COOH > CCl2HCOOH > CClH2COOH > CH3COOHnot applicablen/a (order)Example 2
pKapKa = -log10 Ka; lower pKa is stronger acidcompare acids at the same temperaturedimensionlessExample 2
Weak acid ionisationalpha = square root of (Ka / C) when alpha is smallweak acid with small alpha, roughly under 5 percent ioniseddimensionlessExample 3
Bromination of phenol (bromine water)C6H5OH gives 2,4,6-tribromophenol (white precipitate)excess bromine water at room temperature3 mol Br per mol phenolExample 1
Nitrationdilute HNO3: o- and p-nitrophenol; conc. HNO3 + H2SO4: picric aciddilute HNO3 gives mono, conc. HNO3 with H2SO4 gives tri1 or 3 NO2Example 4
Reimer-Tiemannphenol + CHCl3 + aq NaOH, then H+, giving salicylaldehydeCHCl3 with aqueous NaOH, then acid1 mol CHO per molExample 5
Titration of acidmolar mass = mass / (V x c / basicity)pure acid fully neutralised by NaOH; basicity of the acid knowng per molExample 7

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Ranking m-nitrophenol above p-nitrophenol. Why it tempts: Both are nitro compounds; the loss of the -R effect at the meta position is overlooked.
  • Assuming phenol reacts with sodium hydrogencarbonate. Why it tempts: Phenol is called an acid, and acids are expected to release CO2 from hydrogencarbonate.
  • Giving mononitrophenol for concentrated HNO3 with H2SO4, or picric acid for dilute HNO3. Why it tempts: The reagent name is the same; the concentration and the conditions are not read.
  • Placing HCOOH below CH3COOH, because acetic acid is more familiar. Why it tempts: Only the +I effect of the methyl group in acetic acid is forgotten.
  • Taking the dicarboxylic acid as monobasic in a titration. Why it tempts: Titration problems usually have monobasic acids, and the formula of the acid is not looked up.

Time per question and fast method

Target: about 80 seconds per question.

Order by conjugate-base stability: write the withdrawing or donating group, its position and its effect (-I, -R, +I), then order. For stoichiometry convert the mass to moles first, apply the mole ratio from the balanced change (3 Br, 3 NO2, 1 CHO), then convert back.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. Which is the strongest acid?
Show the answer

Answer: C: Cl3CCOOH. Three chlorine atoms give the largest -I effect.

Question 2. How many bromine atoms enter phenol on treatment with excess bromine water?
Show the answer

Answer: C: 3. The ortho and para positions are all activated: two ortho and one para, 3 in all.

Question 3. Which reagent separates a carboxylic acid from a phenol?
Show the answer

Answer: B: NaHCO3. Carboxylic acids release CO2 from NaHCO3; phenols are too weak to do so.

Question 4. How many moles of NaOH neutralise 0.050 mol of oxalic acid?
Show the answer

Answer: B: 0.10. Oxalic acid is dibasic: 2 x 0.050 = 0.10 mol.

Question 5. If Ka of one acid is 100 times that of another, its pKa is lower by
Show the answer

Answer: B: 2. pKa = -log10 Ka, so a factor of 100 in Ka is 2 pKa units.

Question 6. The Reimer-Tiemann reaction of phenol gives mainly
Show the answer

Answer: B: salicylaldehyde. CHCl3 with aqueous NaOH forms :CCl2, which formylates the ortho position: salicylaldehyde.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Acidity: phenols against alcohols and carboxylic acids

Acid strength is judged by the stability of the conjugate base. Phenoxide is resonance stabilised, alkoxide is not, so phenol > alcohols; carboxylate has equivalent resonance over two oxygens, so RCOOH > phenol. Practical consequences: phenol reacts with NaOH and sodium metal but not with NaHCO3, carboxylic acids react with NaHCO3 giving CO2. In pKa terms a lower pKa means a stronger acid, and one pKa unit is a factor of ten in Ka. Values are easier to remember as an ordering than as exact numbers.

Substituent effects on phenols and benzoic acids

For phenols: p-nitrophenol > m-nitrophenol > phenol > p-methylphenol; for ortho-nitrophenol intramolecular hydrogen bonding is a further consideration, so questions normally restrict themselves to meta and para. For benzoic acids: ortho substituents (nitro, chloro, even methyl) increase acidity (ortho effect), para nitro increases, para methoxy and methyl decrease. Always state the effect (-I, -R, +I, +R, hyperconjugation) and the position before concluding.

Carboxylic acids: inductive effect and distance

Each Cl on the alpha carbon increases the acid strength, so the order is trichloroacetic > dichloroacetic > chloroacetic > acetic. Fluorine is a stronger withdrawing group than chlorine, so fluoroacetic acid is stronger than chloroacetic acid. The effect falls rapidly as the substituent moves away from the carboxyl group. Formic acid has no alkyl group and is stronger than acetic acid; branching of alkyl groups weakens the acid further. For a dibasic acid like oxalic acid, the first dissociation is far stronger than the second.

Reactions of phenol: halogenation, nitration, sulphonation

Bromine water gives 2,4,6-tribromophenol: three Br per ring, a white precipitate. In a non-polar solvent at low temperature mono-bromination occurs (para main). Nitration: dilute HNO3 at low temperature gives o- and p-nitrophenol (the ortho is steam volatile owing to intramolecular hydrogen bonding, so the two are separated by steam distillation); concentrated HNO3 with H2SO4 gives picric acid. Sulphonation gives hydroxybenzenesulphonic acids. These are all ortho-para directing because the OH lone pair stabilises the arenium ion at those positions.

Preparation, reactions of acids and uses (general methods)

Phenol: from chlorobenzene (fusion with NaOH at high temperature and pressure, then acid), from benzenesulphonic acid (fusion with NaOH), from diazonium salts (warming with water) and from cumene (industrial route, giving acetone as a by-product). Carboxylic acids: oxidation of primary alcohols and aldehydes, hydrolysis of nitriles and esters, carbonation of Grignard reagents (RMgX + CO2, then H+), and side-chain oxidation of alkylbenzenes to benzoic acid with KMnO4. Reactions of acids: salt formation with bases and carbonates, esterification with an alcohol (acid catalyst, reversible), conversion to acid chloride with SOCl2 or PCl5, reduction to primary alcohol with LiAlH4, and decarboxylation of the sodium salt with soda lime to the alkane with one carbon fewer. Uses: phenol for resins, dyes and antiseptics; picric acid in dyes and explosives; acetic acid as vinegar and solvent; benzoic acid and its salts as preservatives. These are standard textbook results; section references are pending.

Reimer-Tiemann reaction and what examiners test

Reagents: CHCl3, aqueous NaOH, heat (about 340 K), then H+. Electrophile: dichlorocarbene. Product: salicylaldehyde mainly. Examiners test: ordering of acid strength (phenols, benzoic acids, haloacetic acids), reagent-product matching, number of Br or NO2 introduced, simple stoichiometry from mass of phenol to mass of product, and titration of carboxylic acids (equivalent mass, mono- against dibasic). Target time is 60 to 90 seconds for ordering items and about two minutes for stoichiometry.

Memory hook

Suppose a chai stall near a railway station in Lucknow has a long counter, and a crowd of customers has to be spread across it to avoid a jam.

  1. If the whole crowd crushes into one point at the counter, it is unstable (an alkoxide with all the charge on one oxygen).
  2. If the crowd can spread over a wide platform (phenoxide, charge delocalised into the ring), it is steadier.
  3. If it can spread equally over two equal doors (carboxylate), it is steadiest of all, so the carboxylic acid lets go of its proton most readily.

The more widely and evenly the negative charge of the conjugate base can spread, the stronger the acid: carboxylic acid over two equal oxygens, phenol over the ring, alcohol over nothing.

The wider the charge spreads, the stronger the acid.

Revision card

Try to answer each without looking above.

  1. Why is phenol more acidic than ethanol but less acidic than acetic acid?
  2. Give the acid-strength order of phenol, p-nitrophenol, m-nitrophenol and p-methylphenol.
  3. State the order of acid strength of chloroacetic, dichloroacetic, trichloroacetic and acetic acids.
  4. What are the products of phenol with bromine water, dilute HNO3 and concentrated HNO3 with H2SO4?
  5. Write the reagents and the main product of the Reimer-Tiemann reaction.
  6. Which group of compounds dissolves in NaHCO3 with effervescence and which does not?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 3; fixed: 3
  • Report: content/reviews/learn7-oxy-2026-11-20.md

Textbook references

  • NCERT Chemistry Part 2, Class 12 (reprint 2026-27), Unit 8: Aldehydes, Ketones and Carboxylic Acids, 8.9.1 Reactions Involving Cleavage of O-H Bond (read 2026-11-22)
  • NCERT Chemistry Part 2, Class 12 (reprint 2026-27), Unit 7: Alcohols, Phenols and Ethers, 7.4.4 Chemical Reactions (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 17, text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
  • NCERT Class 12 Chemistry, Alcohols, Phenols and Ethers and Aldehydes, Ketones and Carboxylic Acids chapters: named as the scope reference only; not opened for this draft, so textbook section references are pending. Content written fresh.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.