EngineeringRise

Aldehydes and Ketones: Addition and Named Reactions

Reviewed Last updated 2026-11-20. Syllabus topic: Aldehydes and ketones: nucleophilic addition and named reactions.

In short. The carbonyl carbon is electrophilic (polarised C=O, sp2, planar), so nucleophiles add to it; aldehydes beat ketones in reactivity by less steric hindrance and less electron donation. Key reactions: HCN, NH2-Z derivatives, Grignard, Tollens and Fehling, Clemmensen and Wolff-Kishner, aldol, Cannizzaro and the haloform reaction.

  • Reactivity towards nucleophiles: HCHO > other aldehydes > ketones; aromatic carbonyls are less reactive than aliphatic ones.
  • Nucleophilic addition products: cyanohydrin (HCN), oxime, hydrazone, 2,4-DNP derivative, semicarbazone (NH2-Z compounds), alcohols (Grignard then H3O+).
  • Grignard with HCHO gives a primary alcohol, other aldehydes secondary, ketones tertiary.
  • Aldehydes (not ketones) reduce Tollens reagent (silver mirror, 2 Ag per CHO) and Fehling solution (aliphatic only); Clemmensen is Zn-Hg/HCl, Wolff-Kishner is N2H4, KOH, heat.
  • Alpha-hydrogen reactions: aldol condensation and haloform (CH3CO or CH3CH(OH) groups); aldehydes with no alpha-H undergo Cannizzaro.

Syllabus line: ORGANIC COMPOUNDS CONTAINING OXYGEN General methods of preparation, properties, reactions and uses. ALCOHOLS, PHENOLS AND ETHERS Alcohols: Identification of primary, secondary and tertiary alcohols, mechanism of dehydration. Phenols: Acidic nature, electrophilic substitution reactions, halogenation, nitration and sulphonation, Reimer - Tiemann reaction. Ethers: Structure. Aldehyde and Ketones: Nature of carbonyl group, nucleophilic addition to >C=O group, relative reactivities of aldehydes and ketones, important reactions such as - Nucleophilic addition reactions (addition of HCN, NH3 and its derivatives), Grignard reagent, oxidation, reduction (Wolf Kishner and Clemmensen), the acidity of -hydrogen. Aldol condensation, Cannizzaro reaction, Haloform reaction, chemical tests to distinguish between aldehydes and ketones. Carboxylic Acids: Acidic strength and factors affecting it. (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 17 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

  • Alcohols and ethers: identification and dehydration: Grignard products and oxidation outcomes use the primary, secondary, tertiary classification. Read this first if the classes are unclear.
  • Basic principles of organic chemistry (lesson planned): Inductive effect, resonance and carbanion stability underpin addition and alpha-hydrogen acidity.

Related topics

The concept step by step

  1. Step 1: The carbonyl group

    In >C=O the carbon is sp2 hybridised and the group is planar, with bond angles close to 120 degrees. Oxygen is more electronegative, so the pi electrons are pulled towards it and the carbon carries a partial positive charge. This makes the carbon a target for nucleophiles, and the oxygen a weak base (it can be protonated by acid). Aldehydes have one H on the carbonyl carbon, ketones have two carbon groups.

  2. Step 2: Nucleophilic addition and relative reactivity

    A nucleophile attacks the carbon, the carbon becomes sp3 and the oxygen carries the negative charge, then picks up H+. Reactivity falls with more alkyl groups (steric hindrance and +I effect reducing the positive charge) so methanal > ethanal > propanone. Aromatic aldehydes and ketones are less reactive than aliphatic ones because the ring delocalises electrons into C=O. So the order for HCN addition runs from methanal to diaryl ketones.

  3. Step 3: Addition of HCN and of NH2-Z compounds

    HCN with a trace of base gives a cyanohydrin (R2C(OH)CN); it adds one carbon, and hydrolysis gives a hydroxy acid. Derivatives of ammonia, NH2-Z, add and then lose water to give C=N-Z: hydroxylamine gives an oxime, hydrazine a hydrazone, phenylhydrazine a phenylhydrazone, 2,4-dinitrophenylhydrazine an orange-red 2,4-DNP derivative, semicarbazide a semicarbazone. These are used to characterise carbonyl compounds.

  4. Step 4: Grignard reagent and the class of alcohol

    A Grignard reagent R-MgX adds R as a nucleophile to C=O; acidic hydrolysis then gives the alcohol. Methanal gives a primary alcohol (one new carbon, two H left), any other aldehyde a secondary alcohol, and a ketone a tertiary alcohol. The class of the product equals the number of carbon groups on the carbonyl carbon plus one. Example: propanone with CH3MgBr gives 2-methylpropan-2-ol.

  5. Step 5: Oxidation, reduction and the tests

    Aldehydes oxidise easily: Tollens reagent gives a silver mirror (two Ag per CHO), Fehling and Benedict solutions give a red precipitate of Cu2O for aliphatic aldehydes only. Ketones do not respond. For reduction: Clemmensen (Zn-Hg with concentrated HCl, acidic) and Wolff-Kishner (hydrazine with KOH in a high-boiling solvent, basic) both convert C=O to CH2; pick the one that matches the other groups in the molecule. NaBH4 or LiAlH4 gives alcohols.

  6. Step 6: Alpha-hydrogen reactions: aldol, Cannizzaro, haloform

    Hydrogens on the carbon next to C=O are acidic because the carbanion (enolate) is resonance stabilised. With dilute alkali an aldehyde having alpha-H adds to a second molecule (aldol, a beta-hydroxy aldehyde) and on heating loses water (condensation). Aldehydes with no alpha-H (HCHO, C6H5CHO) disproportionate in concentrated alkali (Cannizzaro): one molecule becomes the alcohol, the other the carboxylate. Compounds with CH3-CO- (and CH3CH(OH)-) give CHI3 with I2 and NaOH: the iodoform test.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

Propanone (5.8 g) is converted completely to its oxime with hydroxylamine. Find the mass of the oxime, C3H7NO.

Marks-style solution of example 1
StepMarks
(CH3)2C=O + NH2OH giving (CH3)2C=NOH + H2O: 1 mol ketone gives 1 mol oxime.1
Moles of propanone = 5.8 / 58.08 = 0.0999 mol.1
Mass of oxime = 0.0999 x 73.09 = 7.3 g.1
Total: 3 marks3

Answer: 7.3 g

Fast method: Tenth of a mole times 73 g per mole.

Sanity check: The oxime is heavier than the ketone by the difference of NH (15 g per mole) per mole: 5.8 + 1.5 = 7.3 g.

Example 2 (easy)

Butanone, CH3COCH2CH3, reacts with CH3MgBr followed by water. Give the class of the alcohol formed (primary 1, secondary 2, tertiary 3).

Marks-style solution of example 2
StepMarks
Butanone is a ketone: two carbon groups on the carbonyl carbon.1
The Grignard carbon adds as a third carbon group.1
Three carbon groups on the carbinol carbon: tertiary (3), 2-methylbutan-2-ol.1
Total: 3 marks3

Answer: tertiary (2-methylbutan-2-ol)

Fast method: Ketone gives tertiary alcohol.

Sanity check: The product has five carbons: 4 from butanone and 1 from CH3MgBr, so C5H12O, an alcohol of the right formula.

Example 3 (medium)

Propanone (5.8 g) reacts completely with excess CH3MgBr in dry ether and is then hydrolysed. Find the mass of 2-methylpropan-2-ol formed.

Marks-style solution of example 3
StepMarks
Moles of propanone = 5.8 / 58.08 = 0.0999 mol; one ketone gives one alcohol.1
Molar mass of (CH3)3COH = 74.12 g per mol.1
Mass = 0.0999 x 74.12 = 7.4 g.1
Total: 3 marks3

Answer: 7.4 g

Fast method: A tenth of a mole at 74 g per mole.

Sanity check: The alcohol is heavier than the ketone by the added CH4 (16 g per mole): 5.8 + 1.6 = 7.4 g.

Example 4 (medium)

Benzaldehyde (10.6 g) is shaken with concentrated NaOH and reacts completely by the Cannizzaro reaction. Find the mass of benzyl alcohol.

Marks-style solution of example 4
StepMarks
Two benzaldehyde molecules give one alcohol and one carboxylate: 2 C6H5CHO giving C6H5CH2OH + C6H5COONa.1
Moles of benzaldehyde = 10.6 / 106.12 = 0.0999 mol, so alcohol = 0.0500 mol.2
Mass of benzyl alcohol = 0.0500 x 108.14 = 5.4 g.1
Total: 4 marks4

Answer: 5.4 g

Fast method: Half the aldehyde becomes alcohol: 0.05 mol x 108 g.

Sanity check: The alcohol mass (5.4 g) is about half of the aldehyde mass (10.6 g), as expected when only half the molecules are reduced.

Typical trap: Assuming all the aldehyde becomes alcohol (10.8 g): in Cannizzaro one molecule is reduced and another oxidised, so at most 50 percent gives alcohol.

Example 5 (medium)

Propanone (5.8 g) is treated with excess iodine and sodium hydroxide. Find the mass of iodoform (CHI3) formed on complete conversion.

Marks-style solution of example 5
StepMarks
CH3COCH3 + 3 I2 + 4 NaOH giving CHI3 + CH3COONa + 3 NaI + 3 H2O: one CHI3 per ketone.1
Moles of propanone = 0.0999 mol.1
Mass of CHI3 = 0.0999 x 393.7 = 39.3 g.1
Total: 3 marks3

Answer: 39.3 g

Fast method: A tenth of a mole times 394 g per mole.

Sanity check: Iodoform (three iodine atoms, 3 x 126.9 = 380.7 g of the 393.7 g per mole of CHI3 is iodine) is much heavier than propanone, so a mass of several times 5.8 g is expected.

Example 6 (hard, multi-step)

A mixture of ethanal, propanal, methanal and benzaldehyde is treated with cold dilute NaOH. Ignoring stereoisomers and dehydration, how many different aldol addition products can form?

Marks-style solution of example 6
StepMarks
Donors need an alpha hydrogen: ethanal and propanal (2 donors). Methanal and benzaldehyde have none and cannot form an enolate.2
Acceptors: any of the four aldehydes can be attacked (4 acceptors).1
Each donor-acceptor pair gives a different product: 2 x 4 = 8 (this includes the two self-aldol products).1
Total: 4 marks4

Answer: 8

Fast method: Number of donors times number of aldehydes present.

Sanity check: The count must lie between the number of self products (2) and the number of all possible pairs of four aldehydes (4 x 4 = 16); 8 does, and halving 16 matches the fact that only half the molecules can be donors.

Typical trap: Counting each aldehyde with itself only, or counting methanal as a donor: a donor needs an alpha hydrogen, an acceptor can be any aldehyde present, and self and crossed products are all counted.

Example 7 (hard, multi-step)

How many of these give yellow iodoform with I2 and NaOH: ethanal, propanal, propanone, propan-1-ol, propan-2-ol, pentan-3-one, pentan-2-one, benzaldehyde?

Marks-style solution of example 7
StepMarks
The test needs a CH3-CO- group or a CH3-CH(OH)- group attached to carbon or hydrogen.1
Ethanal (CH3CHO), propanone and pentan-2-one contain CH3CO; propan-2-ol contains CH3CH(OH): positive.2
Propanal, propan-1-ol, pentan-3-one and benzaldehyde have neither unit: negative.1
Total: 4 marks4

Answer: 4

Fast method: Scan for CH3 on a carbonyl carbon or on a CH(OH) carbon; ethanal counts.

Sanity check: Of eight compounds, the positives (4) are the ones with a methyl on the functional carbon; only 4 of the 8 compounds contain CH3-C(=O)- or CH3-CH(OH)-; pentan-3-one, propanal, propan-1-ol and benzaldehyde have no methyl on the functional carbon, so 4, not 8, is the ceiling.

Typical trap: Ethanal is a positive iodoform test although it is an aldehyde, while propanal and propan-1-ol look similar to propanone and propan-2-ol but lack the CH3CO or CH3CH(OH) unit.

Example 8 (medium, multi-step)

Acetophenone (12.0 g, C6H5COCH3) is reduced by Clemmensen reduction to ethylbenzene in 80 percent yield. Find the mass of ethylbenzene.

Marks-style solution of example 8
StepMarks
C6H5COCH3 giving C6H5CH2CH3: the C=O becomes CH2; 1 mol gives 1 mol.1
Moles of acetophenone = 12.0 / 120.15 = 0.0999 mol.1
Theoretical mass = 0.0999 x 106.17 = 10.6 g.1
At 80 percent yield, mass = 8.5 g.1
Total: 4 marks4

Answer: 8.5 g

Fast method: A tenth of a mole at 106 g per mole is 10.6 g; 80 percent is 8.5 g.

Sanity check: The product loses the oxygen (16 g per mole) and gains two hydrogens: 120 - 16 + 2 = 106, as found.

Example 9 (medium, multi-step)

Ethanal (2.2 g) is warmed with excess Tollens reagent. Find the mass of silver deposited.

Marks-style solution of example 9
StepMarks
CH3CHO + 2 [Ag(NH3)2](+) + 3 OH(-) giving CH3COO(-) + 2 Ag + 4 NH3 + 2 H2O: 2 mol Ag per mol aldehyde.2
Moles of ethanal = 2.2 / 44.05 = 0.0499 mol, so moles of Ag = 0.0999 mol.1
Mass of silver = 0.0999 x 107.87 = 10.8 g.1
Total: 4 marks4

Answer: 10.8 g

Fast method: A twentieth of a mole of aldehyde makes a tenth of a mole of silver: 0.1 x 108 = 10.8 g.

Sanity check: Silver is heavy per mole (108 g per mole against 44 g per mole of aldehyde): 10.8 g from 2.2 g is plausible for 2 mol Ag per 44 g of aldehyde.

Typical trap: Taking 1 mol of silver per mole of aldehyde gives 5.4 g; the oxidation of the aldehyde to carboxylate is a two-electron change, so two silver ions are reduced.

Formulas and units

Formula and unit box for Aldehydes and ketones: nucleophilic addition and named reactions
ResultFormulaValid whenUnits or noteWorked example
Reactivity to nucleophilesHCHO > RCHO > RCOR (aliphatic > aromatic)nucleophilic addition to the carbonyl groupn/a (order)none
Grignard product classHCHO primary, RCHO secondary, ketone tertiaryGrignard reagent in dry ether, then hydrolysisn/a (class)Example 2
NH2-Z productsNH2OH oxime; NH2NH2 hydrazone; 2,4-DNP orange-red solid; semicarbazide semicarbazonenot applicableproductExample 1
Tollens testRCHO + 2 Ag(+) giving RCOO(-) + 2 Agaldehydes with ammoniacal silver nitrate, warmed2 mol Ag per mol RCHOExample 9
Clemmensen and Wolff-Kishner>C=O to >CH2: Zn-Hg/HCl (acid); N2H4, KOH, heat (base)Clemmensen needs an acid-stable substrate; Wolff-Kishner needs a base-stable onen/a (conditions)Example 8
Aldoltwo RCH2CHO with dilute OH(-) giving RCH2CH(OH)CH(R)CHOdilute base; aldehyde or ketone with at least one alpha hydrogenneeds alpha-HExample 6
Cannizzaro2 RCHO + OH(-) giving RCH2OH + RCOO(-)concentrated alkali; aldehyde with no alpha hydrogenno alpha-H; 50 percent eachExample 4
Iodoform testCH3CO-R or CH3CH(OH)R with I2/NaOH giving CHI3 (yellow)CH3CO- or CH3CH(OH)- group, with I2 and NaOH1 mol CHI3 per molExample 5
Crossed aldol productsdonors (with alpha-H) x acceptors (all carbonyls)dilute base; donors need an alpha hydrogen, acceptors can be any carbonylcountExample 6

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Writing a secondary alcohol for the Grignard reaction of a ketone, or a tertiary one for an aldehyde. Why it tempts: The product class is guessed from the reactant name, and the number of groups on carbonyl carbon is not counted.
  • Giving the aldol reaction for benzaldehyde or methanal. Why it tempts: Aldol is the first reaction learned with aldehydes, and the alpha-hydrogen condition is not checked.
  • Assuming all the aldehyde becomes alcohol in a Cannizzaro reaction. Why it tempts: The word reduction suggests complete reduction, ignoring that the same reaction oxidises the other half.
  • Taking 1 mol of silver per mol of aldehyde in Tollens reaction. Why it tempts: Most reactions are written with a 1:1 ratio and the electron count is skipped.
  • Using Clemmensen for a compound with an acid-sensitive group (or Wolff-Kishner with a base-sensitive group). Why it tempts: Both reactions give the same C=O to CH2 change, so the choice of conditions seems irrelevant.

Time per question and fast method

Target: about 90 seconds per question.

Spot the structural feature first: count carbon groups on C=O (reactivity, Grignard class), alpha hydrogens (aldol against Cannizzaro) and CH3CO or CH3CH(OH) units (iodoform). Then use the mole ratio from the balanced change.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. Which of the following gives a silver mirror with Tollens reagent?
Show the answer

Answer: B: propanal. Aldehydes reduce Tollens reagent; propanal is the aldehyde.

Question 2. Moles of silver formed when 0.25 mol of propanal reacts with excess Tollens reagent is
Show the answer

Answer: B: 0.50. Two silver per aldehyde: 2 x 0.25 = 0.50 mol.

Question 3. How many alpha hydrogens does butanone, CH3COCH2CH3, have?
Show the answer

Answer: C: 5. CH3 next to C=O has 3 and CH2 has 2: 5 in total.

Question 4. Methanal with a Grignard reagent and then H3O+ gives a
Show the answer

Answer: A: primary alcohol. Methanal has no carbon groups on C=O, so the product has one: primary.

Question 5. Which reduction converts C=O to CH2 in basic medium?
Show the answer

Answer: B: Wolff-Kishner. Wolff-Kishner uses hydrazine and KOH; Clemmensen is the acidic one.

Question 6. Which of these does NOT give a positive iodoform test?
Show the answer

Answer: C: pentan-3-one. Pentan-3-one has no CH3CO group, and no CH3CH(OH) unit.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Structure, reactivity and the polarised carbonyl

The carbonyl carbon is sp2, planar and electrophilic. Nucleophilic addition changes it to sp3. Reactivity order: HCHO > CH3CHO > CH3COCH3 for steric and electronic reasons, and benzaldehyde is less reactive than ethanal because the ring donates by resonance. The same reasons make aldehydes more reactive than ketones in almost every addition reaction, and in oxidation. Acid catalysis protonates oxygen and activates weak nucleophiles; base catalysis generates a stronger nucleophile, as with HCN where CN(-) is the active species.

Addition reactions: HCN, NH2-Z derivatives and Grignard

Addition of HCN gives cyanohydrins; the reaction is reversible and works well for aldehydes and aliphatic ketones. NH2-OH, NH2-NH2, C6H5NHNH2, 2,4-dinitrophenylhydrazine and NH2CONHNH2 give oxime, hydrazone, phenylhydrazone, 2,4-DNP derivative and semicarbazone, a good test for the carbonyl group itself (not for aldehydes against ketones). The Grignard product class: methanal primary, other aldehydes secondary, ketones tertiary; an excess is not needed because the alkoxide does not react again. Moisture destroys a Grignard reagent, so the reaction runs in dry ether.

Oxidation, reduction and distinguishing aldehydes from ketones

Tollens reagent (ammoniacal silver nitrate): aldehydes give a silver mirror, ketones do not; benzaldehyde also reacts. Fehling and Benedict solutions: aliphatic aldehydes give red Cu2O; benzaldehyde and ketones do not. Clemmensen reduction (Zn-Hg, conc. HCl) and Wolff-Kishner reduction (NH2NH2, KOH, ethylene glycol, heat) convert C=O into CH2: choose acidic or basic conditions by what else is in the molecule. Stoichiometry: one aldehyde reduces 2 Ag(+) to 2 Ag.

Acidity of alpha hydrogen, aldol, Cannizzaro and haloform

Aldol: two molecules with alpha hydrogen, dilute NaOH, low temperature, give a beta-hydroxy carbonyl compound; heating gives the unsaturated product (condensation). In a mixture of two aldehydes, each with alpha-H, four aldol products are possible; a no-alpha-H aldehyde can only be the acceptor. Cannizzaro: no alpha-H, concentrated NaOH, gives alcohol and carboxylate in equal amounts, so at most 50 percent of the aldehyde becomes alcohol. Haloform: CH3CO-R with halogen and base gives CHX3 and a carboxylate with one fewer carbon; ethanol, ethanal and CH3CH(OH)R also respond.

Preparation, addition of NH3 and uses (general methods)

Preparation of aldehydes: oxidation of primary alcohols (PCC stops at the aldehyde), Rosenmund reduction of acid chlorides (H2, Pd on BaSO4), Etard reaction (toluene with CrO2Cl2 gives benzaldehyde), and hydration of terminal alkynes only for ethanal. Preparation of ketones: oxidation of secondary alcohols, hydration of alkynes (Markovnikov, giving methyl ketones), Friedel-Crafts acylation (benzene + RCOCl, AlCl3), and ozonolysis of suitably substituted alkenes. Addition of ammonia itself: simple aldehydes form unstable aldehyde-ammonia adducts (RCH(OH)NH2); methanal with ammonia gives hexamethylenetetramine (urotropine), (CH2)6N4, which is why NH3 is listed separately from the NH2-Z derivatives (those give stable C=N products). Uses: methanal (as formalin) as a preservative and for resins such as bakelite; ethanal for acetic acid; propanone as a solvent; benzaldehyde in flavours and perfumes. These are standard textbook results; section references are pending.

What examiners test

Typical items: order of reactivity towards HCN; identification of the reagent from a product (Tollens, Fehling, 2,4-DNP, Clemmensen, Wolff-Kishner); count of alpha-hydrogens; products of crossed aldol or crossed Cannizzaro; which compounds give the iodoform test; Grignard product class; and stoichiometry (silver, iodoform, oxime or alcohol yields). Time targets: 60 seconds for recall items, 90 to 120 seconds for counts and multi-step products.

Memory hook

Suppose a group of students at a school gate in Jaipur has to reach the one open door of a building, and the door is partly blocked by bags piled in front of it.

  1. An open door with no bags (methanal, two hydrogens on the carbon) is reached by everyone quickly.
  2. One bag in front (an aldehyde with one alkyl group) slows the crowd a little; two big bags (a ketone) slow it much more, and a heavy trolley (an aryl ring pushing electrons in) slows it further.
  3. Some students carry a spare key (an alpha-hydrogen) that they can give up, turning themselves into a key-holder who opens another student's door (the enolate attacks a second carbonyl: aldol). A student with no spare key (no alpha-hydrogen) can only be the one whose door is opened; in strong base such students end up trading roles with each other (Cannizzaro).

The fewer and smaller the groups on the carbonyl carbon, the easier the approach of a nucleophile; an alpha-hydrogen lets a molecule be the nucleophile as well, giving aldol instead of Cannizzaro.

Fewer groups on the carbonyl carbon means faster addition; alpha-hydrogen means aldol.

Revision card

Try to answer each without looking above.

  1. Why is the carbonyl carbon electrophilic, and what is its hybridisation?
  2. Which of methanal, ethanal and propanone is most and which least reactive to HCN, and why is benzaldehyde less reactive than ethanal?
  3. What class of alcohol is formed from a Grignard reagent with methanal, another aldehyde and a ketone?
  4. Which compounds respond to Tollens and which to Fehling solution?
  5. What is the condition for aldol reaction and what is the condition for the Cannizzaro reaction?
  6. Which structural units give a positive iodoform test?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 5; fixed: 5
  • Report: content/reviews/learn7-oxy-2026-11-20.md

Textbook references

  • NCERT Chemistry Part 2, Class 12 (reprint 2026-27), Unit 7: Alcohols, Phenols and Ethers, 7.4.1 Preparation of Alcohols (read 2026-11-22)
  • NCERT Chemistry Part 2, Class 12 (reprint 2026-27), Unit 8: Aldehydes, Ketones and Carboxylic Acids, 8.4 Chemical Reactions (read 2026-11-22)
  • NCERT Chemistry Part 2, Class 12 (reprint 2026-27), Unit 8: Aldehydes, Ketones and Carboxylic Acids, 8.1 Nomenclature and Structure of Carbonyl Group (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 17, text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
  • NCERT Class 12 Chemistry, Alcohols, Phenols and Ethers and Aldehydes, Ketones and Carboxylic Acids chapters: named as the scope reference only; not opened for this draft, so textbook section references are pending. Content written fresh.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.