Aromatic Hydrocarbons and EAS: JEE Main Notes
Reviewed Last updated 2026-11-20. Syllabus topic: Aromatic hydrocarbons and electrophilic substitution.
In short. Benzene is planar, cyclic, fully conjugated with 6 pi electrons (Huckel 4n + 2), so it keeps its ring and undergoes electrophilic substitution. The existing group decides where the next group goes: most activating groups and halogens direct ortho/para, strongly deactivating groups direct meta.
- Aromatic = planar + cyclic + fully conjugated + (4n + 2) pi electrons; benzene, the cyclopentadienyl anion and the tropylium cation qualify, cyclobutadiene and cyclooctatetraene do not.
- Electrophilic substitution: electrophile attacks the ring (slow), giving the arenium (sigma-complex) ion; loss of H+ restores aromaticity (fast).
- Electrophiles: Cl+ / Br+ from X2 with FeX3 (halogenation); NO2+ from concentrated HNO3 and H2SO4 (nitration); R+ from RX and AlCl3 (alkylation); RCO+ from RCOCl and AlCl3 (acylation).
- Friedel-Crafts alkylation can rearrange the carbocation, polyalkylate, and fails on strongly deactivated rings and on aromatic amines; acylation does not rearrange, and the ketone can be reduced to the alkyl group (Clemmensen).
- Directing: -OH, -OR, -NH2, -R: ortho/para and activating; -F, -Cl, -Br, -I: ortho/para but deactivating; -NO2, -CN, -CHO, -COR, -COOH: meta and deactivating.
Syllabus line: HYDROCARBONS Classification, isomerism, IUPAC nomenclature, general methods of preparation, properties and reactions. Alkanes - Conformations: Sawhorse and Newman projections (of ethane), mechanism of halogenation of alkanes. Alkenes - Geometrical isomerism, mechanism of electrophilic addition, addition of hydrogen, halogens, water, hydrogen halides (Markownikoffs and peroxide effect), Ozonolysis and polymerization. Alkynes - Acidic character, addition of hydrogen, halogens, water and hydrogen halides, polymerization. Aromatic hydrocarbons - Nomenclature, benzene - structure and aromaticity, mechanism of electrophilic substitution, halogenation, nitration. Friedel-Craft's alkylation and acylation, directive influence of the functional group in mono- substituted benzene. (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 15 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Basic principles of organic chemistry (lesson planned): Resonance, inductive effect, electrophiles and carbocations are used throughout. Read this first if curved arrows and resonance are unfamiliar.
- Chemical bonding and molecular structure (lesson planned): sp2 hybridisation and delocalised pi bonding explain the structure of benzene. Read this first if hybridisation is shaky.
Related topics
- Basic Principles of Organic Chemistry (lesson planned)
- Chemical Bonding and Molecular Structure (lesson planned)
- Alkenes and alkynes: reactions and mechanisms
- Alkanes: nomenclature, isomerism, conformations and halogenation
- Organic Compounds Containing Nitrogen (lesson planned)
The concept step by step
Step 1: Benzene, C6H6
Benzene has a planar hexagonal ring of six sp2 carbon atoms, each bonded to one hydrogen, with six p electrons delocalised above and below the plane. All C-C bonds have the same length, between a single and a double bond, so the molecule is a resonance hybrid of the two Kekule structures. Naming: toluene (methylbenzene), phenol, aniline, benzaldehyde, benzoic acid; the C6H5- group is phenyl and C6H5CH2- is benzyl; positions are 1,2 (ortho), 1,3 (meta) and 1,4 (para).
Step 2: Aromaticity (Huckel rule)
A species is aromatic if the ring is planar, cyclic, fully conjugated (a p orbital on every ring atom) and has (4n + 2) pi electrons, with n a whole number: 2, 6, 10, 14. Benzene (6), the cyclopentadienyl anion (6) and the tropylium cation (6) qualify; naphthalene has 10. Cyclobutadiene (4) and the cyclopentadienyl cation (4) do not, and cyclooctatetraene is non-planar. Aromatic rings are unusually stable and prefer substitution to addition.
Step 3: The two-step mechanism of substitution
An electrophile E+ takes two electrons from the pi cloud and bonds to one carbon, which becomes sp3. The result is a delocalised carbocation, the arenium (sigma-complex) ion, with positive charge shared over the ortho and para positions relative to that carbon. This step is slow because it destroys aromaticity. A base then removes H+ from the sp3 carbon, restoring the aromatic ring in a fast step. The net change is substitution of H by E.
Step 4: Halogenation and nitration
Halogenation: Cl2 or Br2 with a Lewis acid (FeCl3 or FeBr3, or iron) polarises the halogen so that it acts as X+. Nitration: concentrated nitric acid with concentrated sulphuric acid gives the nitronium ion, NO2+, which attacks benzene to give nitrobenzene. Sulphuric acid acts as the acid that protonates nitric acid so that water can leave. Both are electrophilic substitutions with the same two-step pathway.
Step 5: Friedel-Crafts alkylation and acylation
Alkylation uses R-X with anhydrous AlCl3 to produce R+; the ring is alkylated, but primary carbocations rearrange (1-chloropropane gives isopropylbenzene mainly), and the product is more reactive than benzene, so polyalkylation occurs. Acylation uses RCOCl with AlCl3 to produce the acylium ion RCO+, giving an aryl ketone with no rearrangement and no further substitution; Clemmensen reduction (Zn-Hg, HCl) turns C=O into CH2, giving n-alkylbenzenes. Neither works on a ring carrying a strongly deactivating group or on aniline-type amines.
Step 6: Directive influence of a group
Look at the arenium ion for attack at ortho, meta and para. An electron-donating group (OH, OR, NH2, alkyl) stabilises the cation when the charge sits on the carbon that carries it, which happens for ortho and para attack, so these groups are activating and ortho/para directing. An electron-withdrawing group (NO2, CN, CHO, COR, COOH) destabilises that structure, so meta attack, which never puts positive charge on that carbon, is least bad: deactivating and meta directing. Halogens withdraw by induction (deactivating) but donate by resonance (ortho/para directing).
Step 7: Planning a synthesis
The order of steps decides the isomer. Introduce a meta director first to get a meta product, an ortho/para director first for ortho/para products. A Friedel-Crafts step must come before a strongly deactivating group is added, never after. To get a straight-chain alkylbenzene, acylate and then reduce. Example: benzene, acylate, brominate, reduce gives m-bromoethylbenzene, but ethylbenzene brominated directly gives ortho and para products.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
Show that the cyclopentadienyl anion obeys Huckel rule: find n in 4n + 2 for its 6 pi electrons.
| Step | Marks |
|---|---|
| Count pi electrons: two C=C bonds give 4 electrons and the carbanion lone pair gives 2, so 6. | 1 |
| The ring is planar and every carbon has a p orbital, so the cloud is fully conjugated. | 1 |
| Solve 4n + 2 = 6 to get n = 1, a whole number, so the ion is aromatic. | 1 |
| Total: 3 marks | 3 |
Answer: n = 1; aromatic
Fast method: Subtract 2 from the pi-electron count and divide by 4: (6 - 2) / 4 = 1.
Sanity check: For comparison benzene also has 6 pi electrons (n = 1) and naphthalene has 10 (n = 2), so 6 gives the smallest aromatic count after n = 0 (2 electrons).
Example 2 (easy)
Count the sigma bonds in toluene, C6H5-CH3, and the pi bonds.
| Step | Marks |
|---|---|
| Ring C-C sigma bonds: 6; ring C-H sigma bonds: 5. | 1 |
| Methyl C-H bonds: 3; the C(ring)-CH3 bond: 1. | 1 |
| Sigma bonds = 6 + 5 + 3 + 1 = 15. | 1 |
| Pi bonds: 3 (in the Kekule structure), so the totals are 15 sigma and 3 pi. | 1 |
| Total: 4 marks | 4 |
Answer: 15 sigma bonds and 3 pi bonds
Fast method: Number of atoms is 15 (7 C + 8 H), and a molecule with a single ring has sigma bonds = atoms = 15.
Sanity check: Total bonds in the Kekule structure = 15 + 3 = 18, matching 7 carbons x 4 bonds and 8 hydrogens x 1 bond: (28 + 8) / 2 = 18.
Example 3 (medium)
Find the degree of unsaturation of naphthalene, C10H8.
| Step | Marks |
|---|---|
| Degree of unsaturation = (2C + 2 - H) / 2 with C = 10 and H = 8. | 1 |
| (20 + 2 - 8) / 2 = 14 / 2 = 7. | 1 |
| Seven degrees: 2 rings and 5 C=C bonds in a Kekule structure. | 1 |
| Total: 3 marks | 3 |
Answer: 7 (two rings and five C=C)
Fast method: The saturated hydrocarbon would be C10H22; 22 - 8 = 14 hydrogens fewer means 7 degrees.
Sanity check: Benzene has 4 degrees (one ring and 3 C=C); naphthalene adds one more ring and 2 more C=C, giving 4 + 3 = 7.
Example 4 (medium, multi-step)
Toluene, 9.2 g (92 g per mole), is mononitrated on the ring with an overall yield of 80 percent. Find the mass of mononitrotoluenes formed (molar mass 137 g per mole).
| Step | Marks |
|---|---|
| Moles of toluene = 9.2 / 92 = 0.10 mol. | 1 |
| One nitro group enters per molecule, so the theoretical yield is 0.10 mol. | 1 |
| Actual moles at 80 percent = 0.10 x 0.80 = 0.080 mol. | 1 |
| Mass = 0.080 x 137 = 10.96 g (about 11.0 g) of nitrotoluenes, mainly the ortho and para isomers. | 2 |
| Total: 5 marks | 5 |
Answer: about 11.0 g (10.96 g)
Fast method: 9.2 g x (137 / 92) = 13.7 g at 100 percent, then 80 percent of 13.7 is 10.96 g.
Sanity check: Product mass is larger than the reactant mass (137 against 92 per mole) but less than the 100 percent value 13.7 g.
Example 5 (hard)
Benzene is treated with 1-chloropropane and anhydrous AlCl3. How many carbon atoms are bonded to the carbon that attaches to the ring in the major product, and what is that product?
| Step | Marks |
|---|---|
| AlCl3 forms the primary carbocation CH3CH2CH2(+) (1 carbon neighbour). | 1 |
| A 1,2-hydride shift from CH2 gives the secondary cation CH3CH(+)CH3 with 2 carbon neighbours, which is more stable. | 2 |
| The secondary cation attacks benzene: the ring carbon bonds to the middle carbon of the propyl group. | 1 |
| Major product: isopropylbenzene (cumene); the attached carbon has 2 carbon neighbours. | 1 |
| Total: 5 marks | 5 |
Answer: isopropylbenzene (cumene); 2 carbon neighbours
Fast method: Primary R+ shifts to secondary or tertiary if possible; to get n-propyl, acylate with propanoyl chloride and reduce.
Sanity check: The skeleton still has 3 carbons (C9H12 product from C3H7 plus C6H5), only the point of attachment changed.
Example 6 (hard)
Among nitrobenzene, aniline, benzoic acid, anisole, chlorobenzene, benzaldehyde, acetophenone, toluene and benzenesulphonic acid, how many fail Friedel-Crafts alkylation?
| Step | Marks |
|---|---|
| Strongly deactivating groups (NO2, COOH, CHO, COCH3, SO3H) make the ring too poor in electrons: nitrobenzene, benzoic acid, benzaldehyde, acetophenone and benzenesulphonic acid fail (5). | 2 |
| Aniline: the NH2 lone pair coordinates to AlCl3, producing a deactivating ammonium-type group, so it fails (1). | 2 |
| Anisole, chlorobenzene and toluene react (activating or mildly deactivating groups). | 1 |
| Number that fail = 5 + 1 = 6. | 1 |
| Total: 6 marks | 6 |
Answer: 6
Fast method: Failures: any meta-directing group, plus the amines. That leaves only the activators and halogens, which react.
Sanity check: Failures (6) plus successes (3) equal the 9 compounds listed.
Example 7 (hard, multi-step)
In a monosubstituted benzene with the group at ring position 0, the arenium ion from attack at position a carries positive charge on positions a+1, a+3 and a+5 (mod 6). For how many of the five free positions does the charge fall on the carbon bearing the group, and what does this say about directing effects?
| Step | Marks |
|---|---|
| Attack at ortho position 1: charge on positions 2, 4 and 0: yes, on the substituted carbon. | 1 |
| Attack at meta position 2: charge on 3, 5 and 1: no. | 1 |
| Attack at para position 3: charge on 4, 0 and 2: yes. By symmetry, positions 5 and 4 repeat the ortho and meta results. | 2 |
| Meaning: a donor group stabilises ortho/para attack; an acceptor group destabilises exactly these three positions, so attack occurs at meta. | 1 |
| Charge falls on the substituted carbon for 3 of the 5 free positions (two ortho and one para). | 1 |
| Total: 6 marks | 6 |
Answer: 3 positions (2 ortho and 1 para); donors direct ortho/para, acceptors direct meta
Fast method: Ortho and para attack put charge on the substituted carbon; meta never does.
Sanity check: The three positions found are the two ortho and one para positions, and the remaining two free positions are the two meta positions, giving 5 in total.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Huckel rule | aromatic if planar, cyclic, conjugated and pi electrons = 4n + 2 (2, 6, 10, 14) | planar, cyclic, fully conjugated ring | count of electrons | Example 1 |
| Electrophile in nitration | HNO3 + 2 H2SO4 gives NO2+ + H3O+ + 2 HSO4- | nitration with concentrated HNO3 and H2SO4 | n/a (equation) | Example 4 |
| Electrophile in halogenation | X2 + FeX3 gives X+ (polarised complex) for Cl and Br | Cl2 or Br2 with Lewis acid FeX3 or AlX3 | n/a (equation) | none |
| Friedel-Crafts alkylation | ArH + RX (AlCl3) gives ArR + HX; R+ may rearrange | ring not strongly deactivated and no NH2; primary R may rearrange | n/a (equation) | Example 5 |
| Friedel-Crafts acylation | ArH + RCOCl (AlCl3) gives ArCOR + HCl; no rearrangement | ring not strongly deactivated; AlCl3; acylium ion does not rearrange | n/a (equation) | none |
| Ortho/para, activating | -OH, -OR, -NH2, -NHR, -NR2, -R | directing effect on electrophilic substitution of a monosubstituted benzene | n/a (list) | Example 4 |
| Ortho/para, deactivating | -F, -Cl, -Br, -I | directing effect on electrophilic substitution; halogens deactivate but direct o/p | n/a (list) | none |
| Meta, deactivating | -NO2, -CN, -CHO, -COR, -COOH, -COOR, -SO3H, -NR3+ | directing effect on electrophilic substitution; ring deactivated | n/a (list) | Example 6 |
| Degree of unsaturation | (2C + 2 - H) / 2; benzene 4, naphthalene 7 | Hydrocarbon or C,H-only formula; for C H X N use H+X-N in place of H; O and S ignored; neutral molecule | dimensionless | Example 3 |
| Sigma bonds in benzene | 6 C-C + 6 C-H = 12 sigma, plus 3 pi (Kekule) | not applicable | count | Example 2 |
Common mistakes and speed
- Reading the product of Friedel-Crafts alkylation with a primary halide as the straight-chain alkylbenzene. Why it tempts: The halide is drawn attached to a straight chain, and carbocation rearrangement is not visible in the equation.
- Attempting Friedel-Crafts on nitrobenzene or aniline. Why it tempts: The reaction is learnt as general for benzene derivatives, and the failures (strong deactivators, amines) are listed only as an afterthought.
- Calling halogens meta directors because they are deactivating. Why it tempts: Every other deactivating group in the list is a meta director, so deactivation is assumed to imply meta direction.
- Calling a ring aromatic when only some atoms have p orbitals or when it is not planar (cyclooctatetraene). Why it tempts: The ring has alternating double bonds, which looks like benzene on paper.
- Using the wrong order of steps and getting the wrong isomer (bromination before or after acylation). Why it tempts: The reagents are all familiar, and the order is not checked against the directing effect of the group that is already present.
- Counting the same product twice because positions that are equivalent by symmetry look different on the page. Why it tempts: Positions 2 and 6 of a monosubstituted ring are drawn separately but are the same.
Time per question and fast method
Target: about 90 seconds per question.
Aromaticity: count ring pi electrons, check planar and conjugated, then 4n + 2. Sequences: decide the directing effect of each group before each step and do Friedel-Crafts before any deactivating group. Counting products: place the group, list free positions and merge those that are equivalent by symmetry.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 6 correct. Pick an option for each question.
Practice
- Of the species benzene, cyclobutadiene (planar), the cyclopentadienyl anion, the tropylium… Verified (T1)
- Benzene is treated with 1-chloro-2-methylpropane, (CH3)2CHCH2Cl, in the presence of anhydrous aluminium… Verified (T1)
- Benzene is treated successively with (i) CH3COCl and anhydrous AlCl3, (ii) Br2 and FeBr3, (iii) zinc amalgam… Verified (T1)
- All aromatic hydrocarbons of molecular formula C8H10 that contain a benzene ring are collected. Each is… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Structure, nomenclature and aromaticity
Benzene is C6H6 with six sp2 carbons: the sigma framework has 12 sigma bonds (6 C-C and 6 C-H) and the six p electrons form a delocalised cloud, equivalent to three pi bonds. The delocalisation energy (resonance energy) makes benzene resistant to addition: it does not decolourise bromine water or alkaline permanganate in the cold. Disubstituted benzenes are named ortho, meta, para or with numbers; with three or more groups use lowest locants and alphabetical order, except that the principal group (for example COOH, OH, NH2) takes position 1. The Huckel rule counts pi electrons in the ring: a lone pair on a ring atom or a negative charge on the ring contributes 2, a positive charge on a ring carbon contributes 0.
Mechanism of electrophilic substitution in detail
The rate-determining step is formation of the arenium ion, so factors that stabilise it speed the reaction. This is why rings with electron-donating groups react faster than benzene and rings with electron-withdrawing groups react slower. The positive charge in the arenium ion is on the carbons ortho and para to the attacked carbon, so a substituent on one of those carbons has a large effect: donors stabilise, acceptors destabilise. In the arenium ion for attack at the ortho or para position of a substituted ring, one resonance contributor places charge on the carbon bearing the substituent; for meta attack none does.
Halogenation, nitration and the other electrophiles
Chlorination: C6H6 + Cl2 with FeCl3 gives chlorobenzene + HCl; bromination uses Br2 with FeBr3. Without a Lewis acid, benzene does not react with bromine in the dark. Nitration: C6H6 + HNO3 with H2SO4 gives nitrobenzene + H2O; the electrophile is NO2+ made by HNO3 + 2 H2SO4 giving NO2+ + H3O+ + 2 HSO4-. A second nitration needs harsher conditions because the NO2 group deactivates the ring, and goes meta, giving m-dinitrobenzene. Under forcing conditions benzene can add (hydrogenation to cyclohexane, chlorine in sunlight to benzene hexachloride), but this is not the usual reactivity.
Friedel-Crafts alkylation and acylation: scope and limits
Alkylation: C6H6 + RCl with anhydrous AlCl3 gives C6H5R + HCl. Limits: (1) rearrangement of the carbocation, so n-propyl chloride and isobutyl chloride give isopropylbenzene and tert-butylbenzene as major products; (2) polyalkylation because the alkylbenzene is more reactive than benzene; (3) failure on rings with strongly deactivating groups (NO2, SO3H, CN, CHO, COR, COOH) and on rings with NH2, NHR, NR2, because the amine ties up AlCl3. Acylation: C6H6 + RCOCl with AlCl3 gives C6H5COR; the acylium ion does not rearrange, the ketone deactivates the ring so only one acyl group enters, and Clemmensen or Wolff-Kishner reduction converts C=O to CH2, which gives straight-chain alkylbenzenes such as n-propylbenzene.
Directive influence in mono-substituted benzene, and what examiners test
Ortho/para directing and activating: -OH, -OR, -NH2, -NHR, -NR2, -NHCOCH3, alkyl, phenyl. Ortho/para directing and deactivating: -F, -Cl, -Br, -I. Meta directing and deactivating: -NO2, -CN, -CHO, -COR, -COOH, -COOR, -SO3H and -NR3+. Examiners test: the product of a two- or three-step sequence (order of steps), which compounds fail Friedel-Crafts, the number of distinct products from nitration or substitution (using symmetry of the ring), which group deactivates and which activates, and aromaticity by electron counting. In a ring that carries two groups, the stronger activator usually controls the position, and substitution between two groups in a meta arrangement is hindered. When the question asks for the number of products by electronic effects alone, count the distinct positions ortho or para to the directing group(s) and merge equivalent positions by symmetry.
Memory hook
Suppose six friends sit around a round table at a wedding feast, and a newcomer (the electrophile) wants a seat. One seat is already taken by a generous uncle (an activating group) who loves company.
- The generous uncle makes the seats next to him and the seat opposite him welcoming: these are the ortho and para positions, and he even makes the whole table livelier than before (activation).
- If instead the seat is taken by a grumpy uncle (a deactivating, meta-directing group), the seats next to him and opposite him feel unwelcome, so the newcomer sits two places away: meta.
- A shopkeeper uncle who is polite but tired (a halogen) still welcomes the same three seats but makes the whole table slower: ortho/para directing yet deactivating.
The positive charge of the arenium ion sits on the ortho and para carbons; a donor group there helps (ortho/para director), an acceptor group there hurts, so the acceptor pushes the attack to meta.
Donors welcome ortho and para; acceptors push the newcomer to meta.
Revision card
Try to answer each without looking above.
- State the four conditions for aromaticity and test cyclopentadienyl anion and cyclooctatetraene.
- Write the two steps of electrophilic substitution and name the intermediate.
- Name the electrophile in nitration, bromination, alkylation and acylation.
- Give three limitations of Friedel-Crafts alkylation and one advantage of acylation.
- Classify -OH, -Cl, -NO2 and -CH3 as activating or deactivating, and ortho/para or meta directing.
- How do you prepare m-bromoethylbenzene from benzene?
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 0; fixed: 0
- Report: content/reviews/learn6-hyd-2026-11-20.md
Textbook references
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 9: Hydrocarbons, 9.5.6 Directive influence of a functional group in monosubstituted benzene (read 2026-11-22)
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 9: Hydrocarbons, 9.5.2 Structure of Benzene (read 2026-11-22)
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 9: Hydrocarbons, 9.5.5 Properties (read 2026-11-22)
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 9: Hydrocarbons, 9.5.3 Aromaticity (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 15, text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
- NCERT Class 11 Chemistry, Hydrocarbons chapter: named as the scope reference only; not opened for this draft, so textbook section references are pending. Content written fresh.
- Directing effects, Friedel-Crafts limits and Huckel counts are standard textbook rules; counts and positions in the examples were recomputed by code from the structures given.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.