Haloalkanes and Haloarenes: C-X Bond, Preparation
Reviewed Last updated 2026-11-20. Syllabus topic: Haloalkanes and haloarenes: preparation, properties and the C-X bond.
In short. A haloalkane has X on an sp3 carbon and substitutes or eliminates readily; a haloarene has X on an sp2 ring carbon, with a shorter, stronger C-X bond that resists substitution unless o/p nitro groups are present. Bond strength falls C-F > C-Cl > C-Br > C-I.
- C-X bond: polarised C(delta+)-X(delta-); length rises and enthalpy falls from F to I (CH3-X: 452, 351, 293, 234 kJ per mol), so substitution rate rises F < Cl < Br < I.
- From alcohols: SOCl2 gives RCl with SO2 and HCl as gases; PCl5 and PCl3 are alternatives; with HX the alcohol reactivity is tertiary > secondary > primary: tertiary alcohols react with concentrated HCl alone, while primary and secondary alcohols need ZnCl2 as a catalyst.
- Halide exchange: Finkelstein (NaI, dry acetone) makes iodides; Swarts (AgF, Hg2F2, SbF3) makes fluorides.
- Aryl halides: ring halogenation (Cl2 or Br2 with Fe or FeCl3), Sandmeyer (CuCl/HCl) and Gattermann (Cu/HCl) routes from diazonium salts.
- Ambident nucleophiles: KCN gives nitriles, AgCN gives isonitriles; KNO2 gives alkyl nitrites, AgNO2 gives nitroalkanes.
- Aryl halides are inert to ordinary SN reactions because of resonance and sp2 carbon, but o/p nitro groups activate them; they are o/p-directing yet deactivating in electrophilic substitution.
Syllabus line: ORGANIC COMPOUNDS CONTAINING HALOGENS General methods of preparation, properties and reactions, nature of C-X bond, mechanisms of substitution reactions. Uses, environmental effects of chloroform, iodoform, freons and DDT. (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 16 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Alkanes: nomenclature, isomerism, conformations and halogenation: Free-radical halogenation is one preparation route and explains why it gives mixtures. Read this first if the chain steps are unclear.
- Alkenes and alkynes: reactions and mechanisms: Addition of HX (Markovnikov and the peroxide effect) is a preparation of haloalkanes. Read this first if the direction of addition is unclear.
- Aromatic hydrocarbons and electrophilic substitution: Ring halogenation and the directing effect of Cl need this. Read this first if o/p-directing groups are unclear.
Related topics
- Substitution mechanisms and uses of polyhalogen compounds
- Organic Compounds Containing Halogens (lesson planned)
- Alkenes and alkynes: reactions and mechanisms
- Aromatic hydrocarbons and electrophilic substitution
- Alcohols and ethers: identification and dehydration
The concept step by step
Step 1: What a haloalkane and a haloarene are
A haloalkane has a halogen on an sp3 carbon; it is called primary, secondary or tertiary by the number of carbon atoms attached to that carbon. A haloarene has the halogen directly on an sp2 carbon of a benzene ring. Allylic and benzylic halides have X on an sp3 carbon next to a double bond or ring, and behave like very reactive haloalkanes; vinylic and aryl halides have X on the sp2 carbon itself and behave very differently.
Step 2: The nature of the C-X bond
Halogens are more electronegative than carbon, so the bond is polar with carbon slightly positive and halogen slightly negative. Going from F to I the halogen atom grows larger, the overlap with carbon is poorer, so the bond gets longer and weaker: enthalpies in CH3-X are about 452, 351, 293 and 234 kJ per mol. Substitution needs the C-X bond to break, and the electrophilic carbon is attacked by nucleophiles, so the weaker the bond the faster the reaction: RI > RBr > RCl > RF.
Step 3: Preparing haloalkanes
From alcohols: ROH + SOCl2 gives RCl with SO2 and HCl leaving as gases, which makes it the cleanest method; PCl5 and PCl3 also work; concentrated HCl converts tertiary alcohols at room temperature, while primary and secondary alcohols need anhydrous ZnCl2 as a catalyst (reactivity 3 > 2 > 1); red phosphorus with Br2 or I2 gives bromides and iodides. From alkenes: HX adds by Markovnikov addition, or against it for HBr with peroxide. Halogenation of alkanes by free radicals gives mixtures and is not a preparative method. Halide exchange: NaI in dry acetone turns RCl or RBr into RI because NaCl or NaBr precipitates (Finkelstein); AgF, Hg2F2 or SbF3 give fluorides (Swarts).
Step 4: Preparing haloarenes
Chlorobenzene and bromobenzene come from benzene with Cl2 or Br2 and a Lewis acid (Fe or FeCl3) by electrophilic substitution. Iodination needs an oxidising agent to remove the HI formed, and fluorination is done through the diazonium fluoroborate. Diazonium salts (from aniline with NaNO2 and HCl at 273 to 278 K) give ArCl or ArBr with CuCl/HCl or CuBr/HBr (Sandmeyer), or with copper powder and HCl or HBr (Gattermann), and ArI with KI.
Step 5: Reactions of haloalkanes
With aqueous KOH a haloalkane gives an alcohol by substitution; with alcoholic KOH and heat it loses HX to give an alkene (the more substituted alkene predominates). Other nucleophiles give ethers (RONa), nitriles (KCN), isonitriles (AgCN), amines (NH3), nitroalkanes (AgNO2) and alkyl nitrites (KNO2). Magnesium in dry ether gives a Grignard reagent, sodium in dry ether gives the Wurtz coupling, and reduction with Zn/HCl or LiAlH4 gives the alkane.
Step 6: Why haloarenes are different
In chlorobenzene the lone pair on Cl is delocalised into the ring, giving the C-Cl bond some double-bond character, and the carbon is sp2 (more electronegative than sp3), so the bond is shorter and stronger. Hence aqueous NaOH does not replace Cl under ordinary conditions; it needs about 623 K and high pressure. Nitro groups at ortho or para positions stabilise the negatively charged intermediate and allow replacement under mild conditions. In electrophilic substitution, Cl withdraws electrons (deactivates) but donates by resonance, so it directs to ortho and para positions.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
The CH3-X bond enthalpies are 452 kJ mol⁻1 (F) and 234 kJ mol⁻1 (I). How much less energy, in kJ mol⁻1, is needed to break the C-I bond than the C-F bond?
| Step | Marks |
|---|---|
| The energy needed to break a bond equals its bond enthalpy. | 1 |
| Difference = 452 - 234 kJ mol⁻1. | 1 |
| The C-I bond needs 218 kJ mol⁻1 less energy (about 48 percent less). | 1 |
| Total: 3 marks | 3 |
Answer: 218 kJ mol⁻1
Fast method: 452 - 234: 450 - 234 = 216, plus 2 gives 218.
Sanity check: About half of 452 is 226, so a difference close to 220 is reasonable; units stay kJ mol⁻1 throughout.
Example 2 (easy)
Propan-1-ol (30 g) is converted to 1-chloropropane with excess SOCl2 in 80 percent yield. Find the mass of 1-chloropropane (atomic masses: C 12, H 1, O 16, Cl 35.5).
| Step | Marks |
|---|---|
| Molar mass of C3H7OH = 60 g mol⁻1, so 30 g is 0.50 mol; the reaction is 1 : 1 (ROH + SOCl2 giving RCl + SO2 + HCl). | 1 |
| Moles of RCl at 80 percent = 0.50 x 0.80 = 0.40 mol. | 1 |
| Molar mass of C3H7Cl = 36 + 7 + 35.5 = 78.5 g mol⁻1, so mass = 0.40 x 78.5 = 31.4 g. | 1 |
| Total: 3 marks | 3 |
Answer: 31.4 g
Fast method: 0.5 x 0.8 = 0.4; 0.4 x 78.5 = 31.4.
Sanity check: Product mass (31.4 g) is close to the alcohol mass (30 g) as the molar masses are similar and the yield is 80 percent: plausible.
Example 3 (medium)
Ethanol (4.6 g) reacts completely with excess SOCl2 to give chloroethane. The gaseous by-products are collected at 298 K and 1.0 bar. Find their volume in litres (R = 0.08314 L bar mol⁻1 K⁻1; molar mass of ethanol 46 g mol⁻1).
| Step | Marks |
|---|---|
| 4.6 g of ethanol is 0.10 mol, and each mole of alcohol gives one mole of SO2 and one mole of HCl. | 2 |
| Moles of gas = 2 x 0.10 = 0.20 mol. | 1 |
| V = nRT/P = 0.20 x 0.08314 x 298 / 1.0 = 4.955, about 4.96 L. | 1 |
| Total: 4 marks | 4 |
Answer: 4.96 L (about 4.955)
Fast method: Each mole of gas at 298 K and 1 bar occupies about 24.8 L; 0.20 x 24.8 = 4.96.
Sanity check: At 298 K and 1 bar one mole of gas is about 24.8 L, so 0.2 mol is near 5 L; the unit is litres because R carries L.
Example 4 (medium)
Take the dipole moment of chlorobenzene as 1.50 D and treat o-dichlorobenzene as two equal C-Cl moments of 1.50 D at 60 degrees to each other. Find its dipole moment in D.
| Step | Marks |
|---|---|
| Adjacent ring positions point 60 degrees apart, so the resultant of two equal vectors is 2 x 1.50 x cos(30 degrees). | 2 |
| cos 30 degrees = 0.866, so the resultant = 3.00 x 0.866. | 1 |
| Dipole moment = 2.60 D. | 1 |
| Total: 4 marks | 4 |
Answer: 2.60 D
Fast method: Resultant = mu x square root of 3 = 1.50 x 1.732 = 2.60.
Sanity check: Limiting cases: at 0 degrees the moments would add to 3.00 D and at 180 degrees (para) they cancel to 0; 60 degrees gives a value between, closer to 3.00 D.
Example 5 (medium)
Bromoethane (21.8 g, molar mass 109 g mol⁻1) is warmed with alcoholic KCN and the nitrile is isolated in 75 percent yield. Find the mass of propanenitrile (atomic masses: C 12, H 1, N 14, Br 80).
| Step | Marks |
|---|---|
| 21.8 g is 0.20 mol bromoethane; C2H5Br + KCN giving C2H5CN + KBr is 1 : 1. | 1 |
| Moles of nitrile at 75 percent = 0.20 x 0.75 = 0.15 mol. | 1 |
| Molar mass of C2H5CN = 24 + 5 + 12 + 14 = 55 g mol⁻1, so mass = 0.15 x 55 = 8.25 g. | 1 |
| Total: 3 marks | 3 |
Answer: 8.25 g
Fast method: 0.15 x 55: 0.1 x 55 = 5.5, 0.05 x 55 = 2.75, sum 8.25.
Sanity check: Product (8.25 g) is lower than the halide (21.8 g) because Br (80) is replaced by CN (26): the molar mass falls from 109 to 55.
Example 6 (hard, multi-step)
1-Chlorobutane (9.25 g, molar mass 92.5 g mol⁻1) is stirred with excess NaI in dry acetone; 90 percent is converted to 1-iodobutane. Find the combined mass of 1-iodobutane formed and NaCl precipitated (atomic masses: C 12, H 1, Cl 35.5, I 127, Na 23).
| Step | Marks |
|---|---|
| 9.25 g of C4H9Cl is 0.100 mol; 90 percent reacts, so 0.090 mol of exchange occurs (RCl + NaI giving RI + NaCl). | 2 |
| 1-Iodobutane: molar mass 48 + 9 + 127 = 184 g mol⁻1, mass = 0.090 x 184 = 16.56 g. | 1 |
| NaCl: molar mass 58.5 g mol⁻1, mass = 0.090 x 58.5 = 5.27 g (insoluble in acetone, which drives the exchange). | 1 |
| Combined mass = 16.56 + 5.27 = 21.8 g. | 1 |
| Total: 5 marks | 5 |
Answer: 21.8 g
Fast method: Moles reacted 0.09; per mole both products weigh 184 + 58.5 = 242.5 g; 0.09 x 242.5 = 21.8.
Sanity check: Reactants consumed: 0.09 mol RCl (8.33 g) plus 0.09 mol NaI (13.5 g) is 21.8 g, equal to the products: mass is conserved.
Example 7 (hard)
2-Bromobutane is heated with alcoholic KOH. Counting geometrical isomers as separate compounds, how many different alkenes can form?
| Step | Marks |
|---|---|
| Find the beta carbons that carry hydrogen: C1 (a CH3) and C3 (a CH2). | 2 |
| Loss of H from C1 gives but-1-ene, a terminal alkene with no cis-trans isomerism: 1 compound. | 1 |
| Loss of H from C3 gives but-2-ene, where each double-bond carbon has two different groups, so cis and trans forms are both possible: 2 compounds. | 1 |
| Total = 3 alkenes, the major one being trans-but-2-ene (the most substituted and most stable). | 1 |
| Total: 5 marks | 5 |
Answer: 3 alkenes
Fast method: One terminal alkene plus the cis and trans internal pair: 1 + 2 = 3.
Sanity check: Maximum possible: each distinct beta carbon gives at most 2 geometrical forms, so the count cannot exceed 4; 3 is consistent with one terminal and one internal alkene.
Example 8 (medium, multi-step)
Aniline (9.3 g, molar mass 93 g mol⁻1) is diazotised in 90 percent yield and the diazonium salt is converted to chlorobenzene by CuCl/HCl in 70 percent yield. Find the mass of chlorobenzene (molar mass 112.5 g mol⁻1).
| Step | Marks |
|---|---|
| 9.3 g of aniline is 0.100 mol. | 1 |
| After diazotisation (90 percent): 0.100 x 0.90 = 0.090 mol of diazonium salt. | 1 |
| After the Sandmeyer step (70 percent): 0.090 x 0.70 = 0.063 mol of chlorobenzene. | 1 |
| Mass = 0.063 x 112.5 = 7.09 g. | 1 |
| Total: 4 marks | 4 |
Answer: 7.09 g
Fast method: Overall yield 0.9 x 0.7 = 0.63; 0.63 x 0.1 mol x 112.5 = 7.09 g.
Sanity check: Multiplying the yields (0.63 overall) gives less than the 11.25 g that a 100 percent yield would give: 7.09 is 63 percent of it.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| CH3-X bond enthalpy | F 452 > Cl 351 > Br 293 > I 234 | not applicable | kJ per mol | Example 1 |
| Rate order in substitution | RI > RBr > RCl > RF | comparing alkyl halides with the same alkyl group | dimensionless (relative rate) | none |
| Alcohol to chloride (clean) | ROH + SOCl2 gives RCl + SO2 + HCl | primary and secondary alcohols; gaseous SO2 and HCl by-products | mol ratio 1 : 1 | Example 2 |
| Finkelstein exchange | RCl + NaI (dry acetone) gives RI + NaCl (ppt) | dry acetone with NaI; NaCl precipitates | mol ratio 1 : 1 | Example 6 |
| Swarts fluorination | 2RBr + Hg2F2 gives 2RF + Hg2Br2 (also AgF, SbF3) | alkyl chloride or bromide with metal fluoride (Hg2F2, AgF, SbF3) | mol ratio as balanced | none |
| Ambident nucleophiles | KCN: RCN; AgCN: RNC; KNO2: R-ONO; AgNO2: R-NO2 | ambident nucleophile; ionic salts attack via C or O, silver salts via N | product type | Example 5 |
| Vector sum of two equal moments | mu(res) = 2 mu cos(theta/2) | two equal vectors at angle theta; planar molecule | D (debye) | Example 4 |
| Gas volume from moles | V = nRT / P | ideal gas | L with R = 0.08314 L bar per mol K | Example 3 |
| Overall yield of a chain | product of the step yields | sequential steps; each yield applies to the previous step's amount | fraction | Example 8 |
Common mistakes and speed
- Saying C-F is the most reactive in substitution because F is the most electronegative and the bond is most polar. Why it tempts: Polarity suggests an easily attacked carbon, but the rate is controlled by how easily the bond breaks, and C-F is the strongest bond.
- Using AgCN or KNO2 interchangeably with KCN or AgNO2. Why it tempts: The formulas look similar, but ionic salts attack through carbon (KCN) or oxygen (KNO2), covalent silver salts through nitrogen (AgCN) or nitrogen of the nitro group (AgNO2).
- Treating chlorobenzene like a chloroalkane and expecting it to give phenol with aqueous NaOH at room temperature. Why it tempts: The functional-group name is the same, but resonance and the sp2 carbon make the C-Cl bond strong and the ring repels the nucleophile.
- Applying the peroxide effect to HCl or HI as well as HBr. Why it tempts: The rule is learnt as "peroxide reverses Markovnikov"; for HCl the chain step is endothermic and for HI the first step is unfavourable, so only HBr follows.
- Forgetting enantiomers when counting isomers of a haloalkane formula. Why it tempts: Structural isomers are listed first and the question stem may say only "isomers"; a carbon with four different groups doubles that entry.
Time per question and fast method
Target: about 70 seconds per question.
Reactivity: weaker bond means faster, so iodide first. Reagent questions: SOCl2 for a pure RCl, NaI/acetone for RI, KCN gives RCN and AgCN gives RNC. Aryl halide substitution: count nitro groups at o/p positions. Dipoles: draw the ring angles (60, 120, 180 degrees) and add vectors. Isomer counts: list skeletons, then positions, then add one for each stereocentre.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 6 correct. Pick an option for each question.
Practice
- The mean C-X bond enthalpies in the methyl halides CH3-X are 452 kJ mol⁻1 for F, 351 for Cl, 293 for Br and… Verified (T1)
- Propan-1-ol is converted to 1-chloropropane. Which reagent gives a product that is easiest to purify because… Verified (T1)
- 2-Methylpropene is treated separately with (i) HBr in the dark, (ii) HBr in the presence of an organic… Verified (T1)
- Consider (I) chlorobenzene, (II) 1-chloro-4-nitrobenzene, (III) 1-chloro-2,4-dinitrobenzene and (IV)… Verified (T1)
- Consider every structural isomer of the haloalkane C5H11Cl. Counting each pair of enantiomers as two separate… Verified (T3)
- Chlorobenzene has a dipole moment of 1.50 D. Treating the molecular moment of a polychlorobenzene as the… Verified (T1)
- Among 1-chlorobutane, 1-bromobutane, 2-bromobutane and 2-bromo-2-methylpropane, the compound with the highest… Verified (T1)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
C-X bond: length, enthalpy and dipole
Typical textbook values for CH3-X: bond length 139, 178, 193, 214 pm and bond enthalpy 452, 351, 293, 234 kJ per mol for F, Cl, Br and I. The bond length increases and the bond enthalpy decreases down the group. Dipole moment depends on both charge and bond length, so it is not simply highest for fluorine; the Cl, F and Br methyl halides have similar moments and the iodide the lowest. In substitution, bond weakness (and the stability of X- as a leaving group) decides the order of reactivity RI > RBr > RCl > RF, the reverse of electronegativity and of bond strength.
Physical properties: boiling point, solubility, density
Haloalkanes boil higher than the alkane of similar carbon number because of dipole-dipole and larger London forces; boiling point rises with the size of the halogen (RF < RCl < RBr < RI) and with chain length, and falls with branching because the molecule becomes more compact. They are only slightly soluble in water (they cannot break the hydrogen bonding of water in exchange for weaker attractions) but dissolve in organic solvents. Bromo, iodo and polychloro compounds are denser than water. Among isomeric dihalobenzenes the para isomer has the highest melting point because it packs best in the crystal, while the ortho isomer often has the highest boiling point because of its dipole.
Preparation: conditions and what to avoid
Choose the method for the substrate. Primary and secondary alcohols react with SOCl2 (often with a little pyridine) without rearrangement, giving gaseous by-products. HX reactivity is HI > HBr > HCl, and alcohol reactivity is tertiary > secondary > primary; HCl with ZnCl2 is slow for primary alcohols. Do not use direct free-radical chlorination to prepare a single isomer because the mixture is hard to separate. For iodides use the Finkelstein exchange in dry acetone, where NaCl or NaBr is insoluble and drives the equilibrium. Fluorides are made by Swarts reaction because direct fluorination is violent and iodination of alkanes is reversible.
Reactions of haloalkanes: substitution against elimination
Substitution is favoured in aqueous KOH (the hydroxide ion is heavily solvated by water, so it behaves mainly as a nucleophile) and by lower temperature; elimination (dehydrohalogenation) is favoured by alcoholic KOH (which contains the stronger base alkoxide) and by heat, and by tertiary substrates. When more than one alkene can form, the more substituted alkene is the major product (Saytzeff). Ambident nucleophiles attack through different atoms: ionic KCN attacks through carbon to give RCN, covalent AgCN through nitrogen to give RNC; KNO2 gives R-ONO (attack through oxygen) while AgNO2 gives R-NO2. The Grignard reagent RMgX must be made in dry ether because it is destroyed by water.
Haloarenes: reactivity and named routes
Resonance of the Cl lone pair with the ring and the sp2 hybrid carbon strengthen the C-Cl bond, and an incoming nucleophile is also repelled by the electron-rich ring, so ordinary nucleophilic substitution fails. Chlorobenzene gives phenol with NaOH only at about 623 K and 300 atm; with nitro groups at ortho and para positions, replacement occurs at much lower temperature, and with three (2,4,6-trinitro) it occurs readily. For preparation, Sandmeyer and Gattermann replace the diazonium group by Cl or Br with copper(I) salts or copper powder. Haloarenes couple with sodium in dry ether (Fittig, for two aryl groups, and Wurtz-Fittig with an alkyl halide). In electrophilic substitution the halogen is o/p-directing but deactivating, so nitration of chlorobenzene gives mainly o- and p-nitrochlorobenzene, slower than benzene.
What examiners test here
Common questions: the order of reactivity or bond strength in RX; which reagent gives a pure haloalkane (SOCl2); products with ambident nucleophiles; whether a peroxide changes a given HX addition (only HBr); the effect of o/p nitro groups on aryl halide substitution; dipole moments of substituted benzenes by vector addition; counting isomers (including enantiomers) of a halide formula; and conversion chains using Finkelstein, Swarts, Sandmeyer, Grignard and Wurtz steps. Many wrong options come from reversing the order (stronger bond means faster) or from treating an aryl halide like an alkyl halide.
Memory hook
Suppose a tug-of-war is played on a school ground in Pune with four ropes of different thickness, all tied between a bamboo post (the carbon) and a team (the halogen).
- The thickest rope (F, strength 452 units) needs a huge pull to snap; the thinnest (I, strength 234 units) snaps with about half the pull, so the thin rope breaks first when a stranger (the nucleophile) tugs at the post.
- The rope between 351 (Cl) and 293 (Br) lies in between: the gap between I and F is 452 - 234 = 218 units, a drop of nearly half, which is why RI reacts so much faster than RF.
- Now tie the rope to a post that is already clamped by a metal ring around it (the benzene ring, with the team partly holding hands with the post through resonance): the rope is shorter and tighter, so the same stranger cannot break it unless two helpers (o/p nitro groups) pull alongside.
A weaker C-X bond means faster substitution (RI > RBr > RCl > RF); in haloarenes resonance and the sp2 carbon strengthen the bond, so only nitro-activated rings react.
The weaker the C-X rope, the faster it snaps; the aryl rope is tied tight and needs help.
Revision card
Try to answer each without looking above.
- State the order of C-X bond enthalpy and of rate of substitution for RF, RCl, RBr, RI.
- Name the cleanest reagent for ROH to RCl and say why.
- Which reagent and solvent convert RCl into RI, and what drives the reaction?
- Give the products of KCN, AgCN, KNO2 and AgNO2 with a primary alkyl halide.
- Why does chlorobenzene resist hydrolysis, and what makes it react easily?
- Write the Sandmeyer and Gattermann routes from a diazonium salt to chlorobenzene.
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 2; fixed: 2
- Report: content/reviews/learn7-hal-2026-11-20.md
Textbook references
- NCERT Chemistry Part 2, Class 12 (reprint 2026-27), Unit 6: Haloalkanes and Haloarenes, 6.3 Nature of C-X Bond (read 2026-11-22)
- NCERT Chemistry Part 2, Class 12 (reprint 2026-27), Unit 6: Haloalkanes and Haloarenes, 6.7 Chemical Reactions (read 2026-11-22)
- NCERT Chemistry Part 2, Class 12 (reprint 2026-27), Unit 6: Haloalkanes and Haloarenes, 6.4.3 Halogen Exchange (read 2026-11-22)
- NCERT Chemistry Part 2, Class 12 (reprint 2026-27), Unit 6: Haloalkanes and Haloarenes, 6.1 Classification (read 2026-11-22)
- NCERT Chemistry Part 2, Class 12 (reprint 2026-27), Unit 6: Haloalkanes and Haloarenes, 6.4.1 From Alcohols (read 2026-11-22)
- NCERT Chemistry Part 2, Class 12 (reprint 2026-27), Unit 6: Haloalkanes and Haloarenes, 6.5 Preparation of Haloarenes (read 2026-11-22)
- NCERT Chemistry Part 2, Class 12 (reprint 2026-27), Unit 6: Haloalkanes and Haloarenes, 6.6 Physical Properties (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 16, text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
- NCERT Class 12 Chemistry, Haloalkanes and Haloarenes chapter: named as the scope reference only; not opened for this draft, so textbook section references are pending. Content written fresh.
- Bond enthalpies, boiling-point trends, reagent conditions and uses quoted in the notes are typical textbook-type values and facts; they have not been checked against a named table in this draft. Numbers in examples are given in each problem.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.