Alkanes: Isomerism, Conformations, Halogenation: JEE Main
Reviewed Last updated 2026-11-20. Syllabus topic: Alkanes: nomenclature, isomerism, conformations and halogenation.
In short. Alkanes are saturated hydrocarbons CnH2n+2. Name them by the longest chain and lowest locants, count isomers by skeleton, remember that staggered conformers are more stable than eclipsed, and treat halogenation as a radical chain whose product mix equals (number of H) x (reactivity).
- IUPAC order: longest chain first, then most substituents, then lowest locants, then alphabetical citation (di, tri, sec and tert ignored in alphabetising; iso counted).
- Isomer counts for CnH2n+2: C4 has 2, C5 has 3, C6 has 5, C7 has 9; the number of monochloro products equals the number of sets of equivalent carbon atoms that bear hydrogen.
- Ethane: staggered is the minimum and eclipsed the maximum, about 12 kJ per mole higher (torsional strain); butane has anti < gauche < eclipsed < fully eclipsed in energy.
- Halogenation is a radical chain: initiation, propagation (two steps), termination; reactivity of C-H is 3 degree > 2 degree > 1 degree, and bromine is far more selective than chlorine.
- Wurtz reaction joins two alkyl groups (R-X + Na, dry ether); a mixture of two halides gives three alkanes; Kolbe electrolysis and decarboxylation give alkanes from carboxylate salts.
Syllabus line: HYDROCARBONS Classification, isomerism, IUPAC nomenclature, general methods of preparation, properties and reactions. Alkanes - Conformations: Sawhorse and Newman projections (of ethane), mechanism of halogenation of alkanes. Alkenes - Geometrical isomerism, mechanism of electrophilic addition, addition of hydrogen, halogens, water, hydrogen halides (Markownikoffs and peroxide effect), Ozonolysis and polymerization. Alkynes - Acidic character, addition of hydrogen, halogens, water and hydrogen halides, polymerization. Aromatic hydrocarbons - Nomenclature, benzene - structure and aromaticity, mechanism of electrophilic substitution, halogenation, nitration. Friedel-Craft's alkylation and acylation, directive influence of the functional group in mono- substituted benzene. (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 15 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Basic principles of organic chemistry (lesson planned): Hybridisation, homolytic and heterolytic fission and the stability order of free radicals are used throughout. Read this first if curved-arrow or radical ideas are unfamiliar.
- Chemical bonding and molecular structure (lesson planned): Sigma bonds, sp3 hybridisation and bond rotation explain conformations. Read this first if tetrahedral geometry is shaky.
Related topics
- Basic Principles of Organic Chemistry (lesson planned)
- Chemical Bonding and Molecular Structure (lesson planned)
- Alkenes and alkynes: reactions and mechanisms
- Aromatic hydrocarbons and electrophilic substitution
- Organic Compounds Containing Halogens (lesson planned)
The concept step by step
Step 1: What an alkane is
An alkane is a saturated hydrocarbon: every carbon is sp3 and joined to four atoms by sigma bonds, with the general formula CnH2n+2 for open chains. Because only C-C and C-H sigma bonds are present, alkanes are non-polar and relatively unreactive; they burn, and they undergo substitution (not addition) with halogens in light or heat.
Step 2: Naming by the longest chain
Find the longest continuous chain; if two chains tie, take the one with more substituents. Number from the end that gives the lowest locants to the substituents taken together. Write substituent names in alphabetical order (ignoring di, tri; iso counts, sec and tert do not), each with its locant. Example: CH3-CH(CH3)-CH(CH2CH3)-CH2CH3 is 3-ethyl-2-methylpentane, not 3-isopropylpentane.
Step 3: Structural isomers and how to count them
Structural isomers have the same formula but different carbon skeletons. For CnH2n+2 the counts are 1, 1, 1, 2, 3, 5, 9 for n = 1 to 7. To count reliably, group by the longest chain, then add a methyl, then two methyls or an ethyl, and check that no two skeletons are the same by renaming each one. Carbon types matter later: primary (one carbon neighbour), secondary (two), tertiary (three), quaternary (four).
Step 4: Newman and sawhorse projections of ethane
Rotation about the C-C sigma bond gives conformations. In a Newman projection you look along the C-C bond: the front carbon is a point with three bonds meeting at the centre, the back carbon a circle with three bonds starting at its edge. A sawhorse projection shows the same molecule from the side. Staggered (H atoms 60 degrees apart) is the minimum; eclipsed (H atoms facing each other) is the maximum, about 12 kJ per mole higher, because of torsional strain from three H/H eclipsing interactions.
Step 5: Butane conformers (extension beyond the ethane-only unit text)
For rotation about C2-C3 of butane the order of stability is anti (CH3 groups 180 degrees apart) > gauche (60 degrees apart, steric strain between CH3 groups) > eclipsed (CH3 eclipses H) > fully eclipsed (CH3 eclipses CH3). The energy of a conformer is the sum of its eclipsing and gauche interactions, and a barrier is measured from the conformer you start in.
Step 6: Mechanism of halogenation
Initiation: X2 splits into two X radicals by light or heat. Propagation: X radical takes an H from the alkane to give HX and an alkyl radical; the alkyl radical takes an X from X2 giving RX and a new X radical. Termination: two radicals combine. The alkyl radical is more stable when more substituted, so the reactivity of the C-H bond is 3 degree > 2 degree > 1 degree.
Step 7: Selectivity and product proportions
The proportion of a product is (number of equivalent H) x (relative reactivity per H), divided by the total. With chlorine at room temperature the per-H reactivities are roughly 1 : 3.8 : 5 (primary : secondary : tertiary), so statistical factors still matter; bromine is much more selective, so the tertiary or secondary product dominates, while fluorine is violent and iodine does not react usefully.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
How many structural isomers does C5H12 have, and what are they?
| Step | Marks |
|---|---|
| List by longest chain: 5 carbons gives pentane. | 1 |
| Longest chain 4 carbons with one methyl: 2-methylbutane. | 1 |
| Longest chain 3 carbons with two methyls on the middle carbon: 2,2-dimethylpropane (neopentane). | 1 |
| Total isomers of C5H12 = 3. | 1 |
| Total: 4 marks | 4 |
Answer: 3 isomers: pentane, 2-methylbutane, 2,2-dimethylpropane
Fast method: Recall 2, 3, 5, 9 for C4, C5, C6, C7.
Sanity check: Each skeleton has 5 carbons and 12 hydrogens (2 x 5 + 2 = 12); the counts 2, 3, 5, 9 increase smoothly from C4 to C7.
Example 2 (easy)
Find the number of carbon atoms in the longest chain of CH3-CH2-CH(CH3)-CH2-CH2-CH3 and name the compound.
| Step | Marks |
|---|---|
| Trace the longest path: CH3-CH2-CH-CH2-CH2-CH3 has 6 carbons, with CH3 on the third carbon. | 1 |
| The methyl is on C3 counting from the left and on C4 counting from the right, so number from the left: the lower locant 3 is used. | 1 |
| The parent is hexane with a methyl at C3, so the name is 3-methylhexane. | 1 |
| The longest chain has 6 carbon atoms. | 1 |
| Total: 4 marks | 4 |
Answer: 6 carbon atoms; 3-methylhexane
Fast method: Count carbons along the longest bent path, not just across the printed line.
Sanity check: Total carbons = 6 + 1 = 7, matching C7H16 (7 carbons), so the branch is a single carbon.
Example 3 (medium)
In ethane the staggered form is the minimum. Each H/H eclipsing interaction contributes 4.0 kJ per mole. Find the energy of the eclipsed conformer relative to the staggered one.
| Step | Marks |
|---|---|
| In the eclipsed conformer each of the three C-H bonds on the front carbon faces a C-H bond on the back carbon. | 1 |
| That is 3 H/H eclipsing interactions. | 1 |
| Energy = 3 x 4.0 kJ per mole = 12.0 kJ per mole above the staggered form. | 1 |
| Total: 3 marks | 3 |
Answer: 12.0 kJ per mole
Fast method: Three eclipsing pairs times 4.0.
Sanity check: The result agrees with the textbook ethane rotational barrier of about 12 kJ per mole, and the unit is energy per mole as required.
Example 4 (medium)
Propane is brominated by free radicals. Taking relative reactivity per hydrogen as primary 1 and secondary 82, find the percentage of 2-bromopropane among the monobromo products.
| Step | Marks |
|---|---|
| Propane has 6 primary hydrogens (two CH3) and 2 secondary hydrogens (CH2). | 1 |
| Weights: primary 6 x 1 = 6; secondary 2 x 82 = 164. | 2 |
| Total = 170; 2-bromopropane = 164 / 170. | 1 |
| Percentage of 2-bromopropane = 96.5 percent. | 1 |
| Total: 5 marks | 5 |
Answer: 96.5 percent
Fast method: Share = 164 / (164 + 6); the 6 is small but not zero.
Sanity check: Bromine is highly selective, so a value near 100 percent is reasonable; the primary share is 3.5 percent and the two add to 100.
Example 5 (hard, multi-step)
For the chlorination of methane, bond dissociation enthalpies are C-H 435, Cl-Cl 243, H-Cl 431 and C-Cl 351 kJ per mole. Find the enthalpy of each propagation step and of the overall reaction CH4 + Cl2 giving CH3Cl + HCl.
| Step | Marks |
|---|---|
| Step 1: CH4 + Cl radical giving CH3 radical + HCl breaks C-H and forms H-Cl: 435 - 431 = +4 kJ per mole. | 2 |
| Step 2: CH3 radical + Cl2 giving CH3Cl + Cl radical breaks Cl-Cl and forms C-Cl: 243 - 351 = -108 kJ per mole. | 2 |
| Overall = (+4) + (-108) = -104 kJ per mole, which equals bonds broken (435 + 243) minus bonds formed (431 + 351). | 2 |
| Overall enthalpy of reaction = -104 kJ per mole. | 1 |
| Total: 7 marks | 7 |
Answer: Step 1: +4 kJ per mole; step 2: -108 kJ per mole; overall -104 kJ per mole
Fast method: Overall = bonds broken minus bonds formed: (435 + 243) - (431 + 351).
Sanity check: The reaction is exothermic overall, as chlorination of alkanes is, and the first step is nearly thermoneutral so the chain can run.
Example 6 (hard)
How many structural dichloro derivatives (ignoring stereoisomers) can propane give?
| Step | Marks |
|---|---|
| Both Cl on one terminal carbon: 1,1-dichloropropane. | 1 |
| Both Cl on the middle carbon: 2,2-dichloropropane. | 1 |
| One Cl on each of two different carbons: 1,2-dichloropropane (C1 and C2) and 1,3-dichloropropane (C1 and C3). | 2 |
| Total structural isomers = 4. | 1 |
| Total: 5 marks | 5 |
Answer: 4
Fast method: Two gem products (both Cl on C1, or both on C2) plus two products with Cl on different carbons (C1 and C2, or C1 and C3): 2 + 2 = 4.
Sanity check: All products are C3H6Cl2. The 6 placements (1,1), (1,2), (1,3), (2,2), (2,3), (3,3) reduce to 4 because C1 and C3 are equivalent.
Example 7 (hard)
Among the nine structural isomers of C7H16, how many contain at least one quaternary carbon atom?
| Step | Marks |
|---|---|
| A quaternary carbon is bonded to four other carbons. | 1 |
| Skeletons with a quaternary carbon: 2,2-dimethylpentane, 3,3-dimethylpentane and 2,2,3-trimethylbutane. | 2 |
| The other six isomers (heptane, 2-methylhexane, 3-methylhexane, 2,3-dimethylpentane, 2,4-dimethylpentane, 3-ethylpentane) have none. | 1 |
| Number with a quaternary carbon = 3. | 1 |
| Total: 5 marks | 5 |
Answer: 3
Fast method: Quaternary needs two or more methyls on one carbon: gem-dimethyl on C2 or C3 of pentane, or three methyls on butane.
Sanity check: 3 + 6 = 9, the known number of C7H16 isomers.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| General formula of alkanes | CnH2n+2 | acyclic saturated hydrocarbons (no ring, no double bond) | dimensionless (counts) | none |
| Isomers of CnH2n+2 | n = 4: 2; n = 5: 3; n = 6: 5; n = 7: 9 | structural isomers of acyclic alkanes only (no stereoisomers) | count | Example 1 |
| Product share in halogenation | share = (number of H x reactivity) / sum over all types | free-radical monohalogenation; per-hydrogen reactivities known | percent | Example 4 |
| Relative reactivity (Cl2, room temperature) | 1 : 3.8 : 5 for primary : secondary : tertiary C-H | radical chlorination near room temperature, per hydrogen | dimensionless | none |
| Relative reactivity (Br2, about 400 K) | 1 : 82 : 1640 for primary : secondary : tertiary C-H | radical bromination near 400 K, per hydrogen | dimensionless | Example 4 |
| Energy of a conformer | E = sum of eclipsing and gauche interaction energies | additive-interaction approximation; energy relative to most stable conformer | kJ per mole | Example 3 |
| Ethane eclipsed over staggered | about 12 kJ per mole (3 H/H eclipsing interactions) | ethane only; approximate value, relative to staggered form | kJ per mole | Example 3 |
| Overall enthalpy of a halogenation | sum(bonds broken) - sum(bonds formed) | gas phase, using average bond dissociation enthalpies | kJ per mole | Example 5 |
| Wurtz reaction | 2 R-X + 2 Na (dry ether) gives R-R + 2 NaX; two different halides give 3 alkanes | alkyl halides with sodium in dry ether; best for identical R groups | dimensionless | none |
Common mistakes and speed
- Choosing the chain that runs straight across the page instead of the longest chain. Why it tempts: Condensed formulas are written in a straight line, so the printed line looks like the parent chain even when a branch gives a longer path.
- Citing substituents in order of locant or size rather than alphabetically (writing 2-methyl-3-ethylpentane). Why it tempts: Naming from one end of the chain feels natural, and the locant 2 comes before 3.
- Ignoring the number of hydrogens and using only relative reactivities in halogenation. Why it tempts: The question quotes a clean ratio such as 1 : 3.8 : 5, and it is easy to treat it as the product ratio.
- Counting the quaternary carbon as a site of monochlorination. Why it tempts: In a drawing it is still a carbon atom, but it carries no hydrogen to replace.
- Measuring a conformational barrier from the anti conformer when the molecule starts as gauche. Why it tempts: Tables list energies relative to anti, so the table value is read off as the barrier.
- Forgetting that a new stereocentre doubles a product when the question counts stereoisomers. Why it tempts: Counting by carbon type feels complete, and the enantiomer is not drawn.
Time per question and fast method
Target: about 90 seconds per question.
Naming: longest chain, branch count, lowest locants, alphabetical. Counting monohalo isomers: count sets of equivalent carbons that carry H. Halogenation percentages: (number of H x reactivity) over the sum. Conformations: add interaction values and subtract from the starting conformer.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 6 correct. Pick an option for each question.
Practice
- The IUPAC name of the alkane CH3-CH(CH3)-CH(CH2CH3)-CH2-CH3 is Verified (T1)
- For rotation about the C2-C3 bond of butane, take these strain contributions: each H/H eclipsing 4.0 kJ per… Verified (T1)
- At room temperature the relative reactivity per hydrogen atom of primary, secondary and tertiary C-H bonds… Verified (T1)
- How many of the structural isomers of the alkane C6H14 give at most three different monochloro derivatives… Verified (T1)
- Free-radical monochlorination of 2,2,4-trimethylpentane, (CH3)3C-CH2-CH(CH3)2, can give several monochloro… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Classification, nomenclature and the rules examiners test
Hydrocarbons are classified as saturated (alkanes, cycloalkanes) and unsaturated (alkenes, alkynes, arenes). For alkanes the longest-chain rule decides the parent name; where there is a tie in length the chain with the greater number of branches wins; then the lowest-locant set decides the direction of numbering; then substituents are cited alphabetically. A frequent exam trap is choosing a chain that looks straight on paper rather than the longest one, and the second is placing methyl before ethyl. Alkyl groups: methyl, ethyl, propyl, isopropyl (1-methylethyl), butyl, isobutyl, sec-butyl, tert-butyl; neopentane is 2,2-dimethylpropane.
Isomerism: chain isomers and counting
Alkanes show only chain (skeletal) isomerism. C4H10 has butane and 2-methylpropane; C5H12 has pentane, 2-methylbutane and 2,2-dimethylpropane; C6H14 has five and C7H16 has nine. The number of monochloro derivatives of an isomer equals the number of types of carbon that carry hydrogen, found by symmetry: hexane gives 3, 2,3-dimethylbutane 2, 2,2-dimethylbutane 3, 2-methylpentane 5, 3-methylpentane 4. When a substitution creates a carbon with four different groups the product also exists as a pair of enantiomers, so stereoisomers must be counted if the question says so. Boiling point rises with chain length and falls with branching because branched molecules have smaller surface area and weaker van der Waals forces.
Conformations: ethane (syllabus) and butane (extension)
Conformations are arrangements interconverted by rotation about single bonds and not separable at room temperature. Ethane: staggered and eclipsed, with the eclipsed form about 12 kJ per mole above the staggered form, so there is a small barrier but essentially free rotation at room temperature. Butane about C2-C3: anti is lowest; gauche is about 3.8 kJ per mole higher because the two CH3 groups crowd each other; the eclipsed form with CH3/H interactions is about 16 kJ per mole above anti; the fully eclipsed form (CH3/CH3) is about 19 kJ per mole. These numbers come from adding the interaction contributions, and a question will usually give the contributions and ask for a sum or a difference. Sawhorse and Newman projections only differ in the viewpoint.
Free-radical halogenation in detail
Alkane + X2 under ultraviolet light or at high temperature gives alkyl halide + HX through a chain reaction. Initiation X2 gives 2X; propagation R-H + X gives R + HX, then R + X2 gives R-X + X; termination such as X + X, R + X, R + R. Reactivity of halogens: F2 > Cl2 > Br2 > I2; iodination is not practical because the reaction is endothermic and HI reduces the alkyl iodide. Excess chlorine on methane gives CH3Cl, CH2Cl2, CHCl3 and CCl4. Because the rate-controlling hydrogen abstraction is more exothermic for chlorine, the transition state is early and selectivity is low; for bromine it is late and selectivity high, so bromine strongly prefers the tertiary position (relative reactivities near 1 : 82 : 1640 for primary, secondary, tertiary at about 400 K, a textbook-type figure used as given data in questions).
General methods of preparation and properties
Preparation of alkanes: hydrogenation of alkenes or alkynes (Ni, Pt or Pd); reduction of alkyl halides (zinc and dilute acid, or LiAlH4); Wurtz reaction, 2 R-X + 2 Na in dry ether giving R-R + 2 NaX (the number of carbon atoms doubles, and a mixture of two different halides gives three alkanes); decarboxylation, RCOONa heated with soda lime giving R-H with one carbon fewer; Kolbe electrolysis of sodium or potassium carboxylate giving R-R at the anode. Properties: non-polar and insoluble in water; combustion to CO2 and H2O; at high temperature with a catalyst cracking and isomerisation occur; with halogens the substitution above. Alkanes do not decolourise bromine water or alkaline potassium permanganate in the dark, which separates them from alkenes.
Memory hook
Suppose a tea stall at a railway station serves 9 customers of type one, 2 of type two and 1 of type three, and each customer of type one is willing to take a free biscuit with weight 1.0, type two with weight 3.8 and type three with weight 5.0.
- The share of biscuits that goes to each type is the number of customers times their weight: 9 x 1.0 = 9.0, 2 x 3.8 = 7.6 and 1 x 5.0 = 5.0, a total of 21.6.
- The lone type-three customer gets 5.0 / 21.6, about 23 percent, even though there is only one of them: eagerness beats numbers a little, but numbers still count.
- If the type-three customer is made 1640 times as eager while the other two types are made 1 and 82 (a more selective stall, all three weights now 1 : 82 : 1640), the shares become 9, 164 and 1640 out of 1813, so the single customer takes 1640 / 1813, about 90 percent.
Product share in halogenation = number of equivalent hydrogens times reactivity per hydrogen; bromine makes the reactivity gap huge, so the most substituted C-H wins.
Product share = how many hydrogens times how eager each one is.
Revision card
Try to answer each without looking above.
- State the four rules for naming a branched alkane in order.
- How many structural isomers do C4H10, C5H12, C6H14 and C7H16 have?
- Draw the Newman projection of staggered and eclipsed ethane and give their energy gap.
- Rank the butane conformers anti, gauche, eclipsed and fully eclipsed by energy.
- Write the initiation, propagation and termination steps of methane chlorination.
- Why is bromination more selective than chlorination, and how do you compute a product percentage?
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 3; fixed: 3
- Report: content/reviews/learn6-hyd-2026-11-20.md
Textbook references
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 9: Hydrocarbons, 9.2 ALKANES (read 2026-11-22)
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 9: Hydrocarbons, 9.2.1 Nomenclature and Isomerism (read 2026-11-22)
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 9: Hydrocarbons, 9.2.3 Properties (read 2026-11-22)
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 9: Hydrocarbons, 9.2.2 Preparation (read 2026-11-22)
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 9: Hydrocarbons, 9.2.4 Conformations (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 15, text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
- NCERT Class 11 Chemistry, Organic Chemistry: Some Basic Principles and Hydrocarbons chapter: named as the scope reference only; not opened for this draft, so textbook section references are pending. Content written fresh.
- Bond enthalpies, relative reactivities and strain energies quoted in examples are given as data in each problem; they are typical textbook-type values and have not been checked against a named table in this draft.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.