Alkenes and Alkynes: Reactions and Mechanisms: JEE Main
Reviewed Last updated 2026-11-20. Syllabus topic: Alkenes and alkynes: reactions and mechanisms.
In short. Alkenes (CnH2n) add H2, X2, HX and H2O by electrophilic addition via the more stable carbocation (Markovnikov); only HBr with peroxide reverses this by a radical chain. Alkynes (CnH2n-2) add twice, and terminal alkynes are acidic.
- Electrophilic addition: pi bond attacks E+, giving the most stable carbocation (3 degree > 2 degree > 1 degree), then Nu- adds; rearrangement by 1,2-hydride or methyl shift can follow.
- Markovnikov: the hydrogen goes to the carbon that already has more hydrogens; the peroxide effect (radical chain) reverses it, and only for HBr.
- Ozonolysis with a reductive work-up (Zn and water) cuts every C=C into two C=O groups: aldehydes and ketones; the fragments identify the alkene.
- Geometrical (cis-trans) isomerism needs two different groups on each carbon of the double bond; partial hydrogenation of an alkyne gives cis (Lindlar) or trans (sodium in liquid ammonia).
- Terminal alkynes react with sodium, sodamide and ammoniacal silver nitrate; hydration of an alkyne with Hg2+ gives a ketone (ethyne gives ethanal), and terminal alkynes other than ethyne give methyl ketones.
Syllabus line: HYDROCARBONS Classification, isomerism, IUPAC nomenclature, general methods of preparation, properties and reactions. Alkanes - Conformations: Sawhorse and Newman projections (of ethane), mechanism of halogenation of alkanes. Alkenes - Geometrical isomerism, mechanism of electrophilic addition, addition of hydrogen, halogens, water, hydrogen halides (Markownikoffs and peroxide effect), Ozonolysis and polymerization. Alkynes - Acidic character, addition of hydrogen, halogens, water and hydrogen halides, polymerization. Aromatic hydrocarbons - Nomenclature, benzene - structure and aromaticity, mechanism of electrophilic substitution, halogenation, nitration. Friedel-Craft's alkylation and acylation, directive influence of the functional group in mono- substituted benzene. (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 15 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Basic principles of organic chemistry (lesson planned): Carbocation stability, hyperconjugation, inductive effect and curved arrows are used in every mechanism here. Read this first if they are unclear.
- Alkanes: nomenclature, isomerism, conformations and halogenation: Radical chain steps and naming rules carry over. Read this first if initiation, propagation and termination are unfamiliar.
Related topics
- Basic Principles of Organic Chemistry (lesson planned)
- Alkanes: nomenclature, isomerism, conformations and halogenation
- Aromatic hydrocarbons and electrophilic substitution
- Organic Compounds Containing Halogens (lesson planned)
- Organic Compounds Containing Oxygen (lesson planned)
The concept step by step
Step 0: Naming alkenes and alkynes (IUPAC)
Choose the longest chain that contains the multiple bond (not necessarily the longest chain in the molecule), change the ending -ane to -ene for a double bond or -yne for a triple bond, and number from the end that gives the multiple bond the lowest locant; only then decide on the substituent locants. Examples: CH3CH=CHCH2CH3 is pent-2-ene; CH2=C(CH3)CH2CH3 is 2-methylbut-1-ene; HC triple-bond C-CH(CH3)CH3 is 3-methylbut-1-yne. With more than one multiple bond the endings become -diene or -diyne with both locants (hexa-2,4-diene); if a double and a triple bond are both present (an enyne) the lowest set of locants goes to the two bonds together, and on a tie the double bond gets the lower number: HC triple-bond C-CH2-CH=CH2 gives the set 1,4 either way, so it is pent-1-en-4-yne. Cis or trans is added as a prefix when the geometry is stated.
Step 1: Structure of C=C and C-triple-bond-C
In an alkene each double-bond carbon is sp2 with three sigma bonds in a plane (about 120 degrees) and one p orbital forming the pi bond above and below the plane; rotation is blocked, which allows cis-trans isomers. In an alkyne each triple-bond carbon is sp with a linear arrangement (180 degrees), one sigma bond and two pi bonds. General formulas: CnH2n for alkenes, CnH2n-2 for alkynes.
Step 2: Geometrical isomerism
A double bond shows cis-trans isomerism when each double-bond carbon carries two different groups. Hydrogen counts as a group: CH3CH=CHCH3 qualifies, CH2=CHCH3 and (CH3)2C=CH2 do not. In cis the similar groups are on the same side; trans has them opposite. The cis isomer usually has the higher boiling point and dipole moment; the trans isomer is usually more stable and often has the higher melting point.
Step 3: Mechanism of electrophilic addition
The pi electrons are a source of electrons, so an electrophile E+ attacks first. Step 1 (slow): E+ adds to one carbon and a carbocation forms on the other. Step 2 (fast): the nucleophile attacks the carbocation. The carbocation chosen is the more stable one, so for CH3CH=CH2 + HBr the proton goes to C1 and Br ends up on C2. This is Markovnikov addition: the hydrogen adds to the carbon that already has more hydrogens.
Step 4: Rearrangement and the peroxide effect
If a more stable carbocation can be reached by moving H or CH3 from a neighbouring carbon (1,2-shift), the shifted product is the major one: 3-methylbut-1-ene with HBr gives 2-bromo-2-methylbutane. Only with HBr, and only when peroxide is present, a Br radical adds first to the less substituted carbon so that the more stable radical forms; the product is anti-Markovnikov. HCl and HI do not show this effect.
Step 5: Addition of H2, X2 and H2O
Hydrogen adds over Ni, Pt or Pd to give an alkane. Bromine or chlorine adds through a cyclic halonium ion, anti, to give a vicinal dihalide; decolourising of bromine water is a test for unsaturation. Water adds with dilute acid (Markovnikov, through the carbocation) to give an alcohol. Alkynes add two molecules of these reagents in turn.
Step 6: Ozonolysis and polymerisation
Ozone converts C=C into an ozonide; reductive work-up (zinc and water) gives aldehydes and ketones, one carbonyl compound on each side of the original double bond. Reading the products backwards joins the C=O carbons to rebuild the alkene. Addition polymerisation joins many alkene molecules: ethene gives polythene, propene gives polypropene, with an average molar mass equal to the number of monomer units times the monomer mass.
Step 7: Alkynes: acidity and addition
Acidity follows s-character of the carbon in C-H: sp (50 percent) > sp2 (33 percent) > sp3 (25 percent), so terminal alkynes lose H+ to sodium, sodamide or ammoniacal silver nitrate or copper(I) chloride (precipitates of metal acetylides), while alkenes and alkanes do not. Hydration with Hg2+ gives an enol that turns into a ketone; only ethyne gives an aldehyde. Partial hydrogenation gives cis (Lindlar) or trans (sodium in liquid ammonia); three ethyne molecules passed through a red-hot iron tube give benzene.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
Find the degree of unsaturation of C5H8 and say what structures are possible.
| Step | Marks |
|---|---|
| Degree of unsaturation = (2C + 2 - H) / 2 with C = 5 and H = 8. | 1 |
| (2 x 5 + 2 - 8) / 2 = 4 / 2 = 2. | 1 |
| Two degrees: one triple bond, or two double bonds, or one double bond and one ring, or two rings. | 1 |
| Degree of unsaturation = 2. | 1 |
| Total: 4 marks | 4 |
Answer: 2 (one C-triple-bond-C, or two C=C, or C=C plus a ring, or two rings)
Fast method: Compare with the alkane C5H12: 4 hydrogens fewer means 2 degrees.
Sanity check: The alkane C5H12 has 0 degrees; each degree removes 2 hydrogens, so 12 - 8 = 4 hydrogens is 2 degrees.
Example 2 (easy)
How many acyclic alkenes of formula C4H8 exist, counting cis and trans isomers separately?
| Step | Marks |
|---|---|
| Straight chain: but-1-ene (no cis-trans because C1 has two H). | 1 |
| But-2-ene exists as cis and trans: 2 isomers. | 1 |
| Branched chain: 2-methylpropene (no cis-trans). | 1 |
| Total = 1 + 2 + 1 = 4. | 1 |
| Total: 4 marks | 4 |
Answer: 4
Fast method: Three structural isomers plus one extra for the cis-trans pair of but-2-ene.
Sanity check: Each isomer is C4H8: 4 carbons and 8 hydrogens; 3 structural isomers plus 1 geometrical gives 4.
Example 3 (medium)
Reductive ozonolysis of an alkene of molar mass 84 g per mole gives propanone as the only organic product. How many moles of propanone form from 8.4 g of the alkene?
| Step | Marks |
|---|---|
| Propanone on both sides means (CH3)2C=C(CH3)2, 2,3-dimethylbut-2-ene (C6H12, 84 g per mole). | 1 |
| Moles of alkene = 8.4 / 84 = 0.10 mol. | 1 |
| Each alkene molecule gives two propanone molecules. | 1 |
| Moles of propanone = 2 x 0.10 = 0.20 mol. | 1 |
| Total: 4 marks | 4 |
Answer: 0.20 mol
Fast method: Two carbonyl molecules per alkene molecule: 2 x 0.10.
Sanity check: Carbon balance: 0.10 mol x 6 C = 0.60 mol C; 0.20 mol x 3 C = 0.60 mol C. They agree.
Example 4 (medium)
Ethene weighing 2.8 g is passed into excess bromine water. Find the mass of 1,2-dibromoethane formed (C = 12, H = 1, Br = 80 g per mole), assuming complete reaction.
| Step | Marks |
|---|---|
| Moles of ethene = 2.8 / 28 = 0.10 mol. | 1 |
| CH2=CH2 + Br2 gives CH2Br-CH2Br, one product molecule per alkene. | 1 |
| Molar mass of C2H4Br2 = 24 + 4 + 160 = 188 g per mole. | 1 |
| Mass = 0.10 x 188 = 18.8 g. | 1 |
| Total: 4 marks | 4 |
Answer: 18.8 g
Fast method: Mass of product = 2.8 g + mass of Br2 added (0.10 x 160 = 16.0 g) = 18.8 g.
Sanity check: The product mass equals the sum of the masses of ethene and bromine (2.8 + 16.0), as it must for an addition reaction.
Example 5 (hard)
HBr is added to 3-methylbut-1-ene, CH2=CH-CH(CH3)2, without peroxide. How many carbon atoms are attached to the carbocation carbon after the most favourable single 1,2-shift, and what is the major product?
| Step | Marks |
|---|---|
| H+ adds to C1, giving the secondary cation CH3-CH(+)-CH(CH3)2 (2 carbon neighbours). | 1 |
| The neighbouring carbon C3 has one hydrogen, which can move with its pair to C2. | 1 |
| After the 1,2-hydride shift the cation is (CH3)2C(+)-CH2CH3, a tertiary cation with 3 carbon neighbours. | 2 |
| Bromide attacks the tertiary cation: 2-bromo-2-methylbutane is the major product; the carbon neighbours of the cation number 3. | 1 |
| Total: 5 marks | 5 |
Answer: 3 carbon neighbours (tertiary cation); major product 2-bromo-2-methylbutane
Fast method: Secondary cation next to a carbon with one H: shift the H and get the tertiary cation.
Sanity check: Hydrocarbon skeleton unchanged: 5 carbons both before and after; the number of carbon neighbours on the charged carbon rises from 2 to 3, so the cation becomes more stable.
Example 6 (hard)
Of the acyclic alkynes of formula C5H8, how many react with ammoniacal silver nitrate to give a precipitate?
| Step | Marks |
|---|---|
| Straight chain: pent-1-yne (terminal) and pent-2-yne (internal). | 1 |
| Branched chain: 3-methylbut-1-yne (terminal); it is the only branched alkyne of C5H8. | 1 |
| Total = 3 alkynes. | 1 |
| Only terminal alkynes (a hydrogen on the sp carbon) give a silver precipitate: pent-1-yne and 3-methylbut-1-yne, so 2 of them react. | 2 |
| Total: 5 marks | 5 |
Answer: 2 (out of 3 alkynes in all)
Fast method: Count the alkynes and then keep only those with a triple bond at the end of the chain.
Sanity check: Both terminal alkynes have the form R-C(triple bond)-H, and C5H8 has 2 degrees of unsaturation, matching one triple bond.
Example 7 (hard, multi-step)
A sample of polypropene has an average molar mass of 84 000 g per mole. (a) How many propene units (42 g per mole) are in an average chain? (b) What mass of propene is needed to make 1.00 kg of this polymer if the yield is 80 percent?
| Step | Marks |
|---|---|
| (a) Number of units n = 84 000 / 42 = 2000. | 2 |
| (b) Addition polymerisation keeps all atoms, so 1000 g of polymer needs 1000 g of propene at 100 percent yield. | 2 |
| At 80 percent yield, mass of propene = 1000 / 0.80 = 1250 g. | 1 |
| Answers: 2000 units; 1250 g of propene (1.25 kg). | 1 |
| Total: 6 marks | 6 |
Answer: 2000 units; 1250 g of propene
Fast method: Units = polymer mass over monomer mass; with 80 percent yield, scale the monomer mass by 1.25.
Sanity check: Monomer needed (1.25 kg) is more than polymer made (1.00 kg), as expected for a yield below 100 percent.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| General formulas | alkene CnH2n; alkyne CnH2n-2 | acyclic hydrocarbons with one C=C (alkene) or one triple bond (alkyne) | dimensionless (counts) | none |
| Degree of unsaturation | (2C + 2 - H) / 2 (a halogen counts like H; each N adds 1 to the numerator) | neutral molecule of known formula; counts rings plus pi bonds | dimensionless | Example 1 |
| Markovnikov rule | H adds to the carbon with more H; X to the carbon with fewer H | ionic addition of HX to an unsymmetrical alkene, no peroxide | n/a (rule) | Example 5 |
| Carbocation stability | 3 degree > 2 degree > 1 degree > CH3 cation | alkyl carbocations; stabilised by alkyl groups (+I, hyperconjugation) | n/a (order) | Example 5 |
| Hydrogen halide reactivity | HI > HBr > HCl; peroxide effect only for HBr | electrophilic addition of HX; radical peroxide route only for HBr | n/a (order) | none |
| Acidity and s-character | sp (50 percent) > sp2 (33 percent) > sp3 (25 percent) | comparing C-H acidity in hydrocarbons | percent s | none |
| Alkyne hydration | R-C(triple bond)-H + H2O (Hg2+, H+) gives R-CO-CH3; ethyne gives CH3CHO | Hg2+/H+ hydration; terminal alkynes give methyl ketones | n/a (rule) | none |
| Hydrogen needed for saturation | moles of H2 = moles of C=C + 2 x moles of C-triple-bond-C | complete hydrogenation of non-aromatic C=C and triple bonds | mol | none |
| Addition polymer | units n = polymer molar mass / monomer molar mass | addition polymer; average chain, monomer mass equals repeat-unit mass | dimensionless | Example 7 |
| Ozonolysis (reductive) | C=C gives two C=O; =CH2 gives HCHO, =CHR gives RCHO, =CR2 gives R2CO | reductive work-up (Zn/H2O or Me2S) | n/a (rule) | Example 3 |
Common mistakes and speed
- Applying the peroxide effect to HCl or HI. Why it tempts: The rule is learnt as "peroxide gives anti-Markovnikov", and the hydrogen halide is not noticed in the question.
- Ignoring carbocation rearrangement and giving the direct Markovnikov product. Why it tempts: The simple rule always works for propene and but-1-ene, so it is applied by habit to branched alkenes where it fails.
- Counting three molecules (not two compounds) from ozonolysis of a symmetrical diene. Why it tempts: The question says "how many products" and the identical molecules are counted separately.
- Assuming every alkyne gives a precipitate with ammoniacal silver nitrate or a single ketone on hydration. Why it tempts: The terminal-alkyne reaction is the first one learnt, and symmetrical internal alkynes (one ketone) and unsymmetrical ones (two) are not distinguished.
- Declaring cis-trans isomerism when one double-bond carbon carries two identical groups. Why it tempts: Any double bond looks like a candidate for geometrical isomerism at first glance.
- Writing an aldehyde as the hydration product of every alkyne. Why it tempts: Ethyne gives ethanal, and the exception is generalised to all alkynes.
Time per question and fast method
Target: about 90 seconds per question.
Addition: H goes to the carbon with more H (ionic) and check for a hop to a more stable cation. With peroxide and HBr, reverse it. Ozonolysis: cut C=C and put =O on each end, then count distinct pieces. Counting alkenes or alkynes: list by skeleton, then add one for each cis-trans pair.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 6 correct. Pick an option for each question.
Practice
- Hydrogen bromide reacts with 2-methylbut-1-ene, CH2=C(CH3)CH2CH3, in the presence of benzoyl peroxide. The… Verified (T1)
- Hexa-2,4-diene, CH3-CH=CH-CH=CH-CH3, undergoes ozonolysis followed by reductive work-up with zinc and water.… Verified (T1)
- The alkene (CH3)3C-CH=CH2 (3,3-dimethylbut-1-ene) reacts with hydrogen chloride in the absence of peroxide.… Verified (T1)
- The number of acyclic alkyne isomers of molecular formula C6H10 (one C-C triple bond, structural isomers… Verified (T1)
- The number of acyclic alkenes of molecular formula C6H12, counting geometrical (cis-trans) isomers but not… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Preparation and geometrical isomerism
Alkenes are prepared by dehydrohalogenation of alkyl halides with alcoholic KOH (the more substituted alkene is the major product, Saytzeff rule), by dehydration of alcohols with concentrated H2SO4 or alumina, and by partial reduction of alkynes (H2 over Lindlar catalyst gives the cis alkene; sodium in liquid ammonia gives the trans alkene). Alkynes come from dehydrohalogenation of vicinal or geminal dihalides with alcoholic KOH or NaNH2, from calcium carbide and water (ethyne), and from alkylation of terminal alkynide ions. For counting isomers of C6H12 there are 13 structural alkenes and 17 when cis-trans forms are added; optical isomers are counted separately only if the question says so.
Electrophilic addition: regiochemistry and carbocation rearrangement
The addition of HX, H2O (acid catalysed) and the electrophilic part of X2 is stepwise through a carbocation, whose stability is 3 degree > 2 degree > 1 degree > methyl (hyperconjugation and the inductive effect of alkyl groups). Markovnikov addition follows. If the first-formed carbocation can become more stable by a 1,2-hydride or 1,2-methyl shift, the rearranged product dominates, as in (CH3)3C-CH=CH2 + HCl giving 2-chloro-2,3-dimethylbutane as the major product. A question that asks for the "major product" with an alkene next to a branched carbon is therefore testing this. The reactivity order of hydrogen halides is HI > HBr > HCl.
Peroxide effect, hydration and halogen addition
In the presence of peroxide (benzoyl peroxide, for example) HBr adds to an unsymmetrical alkene by a free-radical chain: peroxide gives radicals, which make Br radicals from HBr; Br radical adds to the less substituted carbon to give the more stable carbon radical; this radical takes H from HBr and regenerates Br. The result is anti-Markovnikov addition. The effect is not seen with HCl (the H-Cl bond is too strong) or HI (the I radical adds too slowly). Water adds in the presence of dilute H2SO4 by Markovnikov addition. Bromine and chlorine add anti through a halonium ion, giving a vicinal dihalide; the red-brown colour of bromine water disappears.
Ozonolysis and polymerisation
Ozonolysis: R2C=CR2 plus O3 gives the ozonide; with Zn and water (reductive work-up) it gives two carbonyl compounds, aldehydes where the carbon had a hydrogen and ketones where it had two alkyl groups. Hexa-2,4-diene, CH3CH=CH-CH=CH-CH3, gives two molecules of ethanal and one molecule of ethanedial. In an oxidative work-up (hydrogen peroxide) the aldehyde products become carboxylic acids. Addition polymerisation: n CH2=CH2 gives polythene (peroxide initiator at high pressure, or a Ziegler-Natta catalyst at low pressure); n CH3CH=CH2 gives polypropene; the polymer formula unit is the monomer, so the number of monomer units equals the polymer molar mass divided by the monomer molar mass.
Alkynes: acidic character and addition reactions
The C-H bond of a terminal alkyne is acidic because the sp carbon is more electronegative (50 percent s-character) and holds the carbanion better. Reactions: HC triple-bond CH + Na gives sodium acetylide and H2; with NaNH2 in liquid ammonia the acetylide forms and can be alkylated; with ammoniacal AgNO3 a white precipitate and with ammoniacal Cu2Cl2 a red precipitate form for terminal alkynes only. Addition: H2 with Ni gives the alkane; with Lindlar catalyst the cis alkene; Br2 or Cl2 adds twice to give a tetrahalide; HX adds twice in the Markovnikov sense to give a geminal dihalide; water with HgSO4 and dilute H2SO4 gives an enol that tautomerises to a ketone (propyne gives propanone, ethyne gives ethanal). An internal unsymmetrical alkyne gives two ketones, a symmetrical one gives one. Polymerisation: ethyne trimerises to benzene in a red-hot iron tube.
Memory hook
Suppose two chai stalls stand on a lane: one already has 2 customers and the other has 1. A new customer (the proton) joins the stall that is already busier, and then the shopkeeper of that stall (the bromide) serves the other side.
- In the alkene the carbon with more hydrogens is the busier stall, so H+ goes there: this is the rule that the rich get richer, and the rest of the molecule ends up on the carbon with fewer hydrogens.
- Now suppose a rival tout (peroxide) pulls the crowd the other way: Br radical goes first to the stall with more hydrogens (the less substituted end), so the hydrogen ends up on the carbon with fewer hydrogens.
- If a shop next door is even bigger (a more stable cation), the charge may hop there before the order is served: that is rearrangement.
H adds to the carbon with more H in the ionic path; Br radical goes first to the carbon with more H (the less substituted end) in the radical path, and H ends on the carbon with fewer H; the most stable carbocation or radical decides.
The rich get richer, unless peroxide reverses the crowd; and the charge hops to a bigger shop if it can.
Revision card
Try to answer each without looking above.
- State the condition for cis-trans isomerism and give one alkene that has it and one that does not.
- Explain Markovnikov addition using carbocation stability.
- Why does the peroxide effect apply only to HBr, and what is the product with propene?
- What are the products of reductive ozonolysis of hexa-2,4-diene?
- Why are terminal alkynes acidic, and name two reagents that show it.
- How does Lindlar hydrogenation differ from sodium in liquid ammonia for an alkyne?
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 4; fixed: 4
- Report: content/reviews/learn6-hyd-2026-11-20.md
Textbook references
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 9: Hydrocarbons, 9.3.4 Preparation (read 2026-11-22)
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 9: Hydrocarbons, 9.3.5 Properties (read 2026-11-22)
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 9: Hydrocarbons, 9.4.4 Properties (read 2026-11-22)
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 9: Hydrocarbons, 9.3.1 Structure of Double Bond (read 2026-11-22)
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 9: Hydrocarbons, 9.4.2 Structure of Triple Bond (read 2026-11-22)
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 9: Hydrocarbons, 9.3.3 Isomerism (read 2026-11-22)
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 9: Hydrocarbons, 9.4.1 Nomenclature and Isomerism (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 15, text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
- NCERT Class 11 Chemistry, Hydrocarbons chapter: named as the scope reference only; not opened for this draft, so textbook section references are pending. Content written fresh.
- Isomer counts, products by rule (Markovnikov, rearrangement, ozonolysis, hydration) were recomputed by code from the structures in each question or example; the rules themselves are standard textbook rules not yet tied to a section number.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.