Physical Equilibria and Henry's Law: JEE Main Notes
Reviewed Last updated 2026-11-20. Syllabus topic: Physical equilibria and Henry law.
In short. A physical equilibrium is a dynamic balance between two phases of the same substance in a closed vessel at constant temperature. Vapour pressure depends only on temperature; for a dissolved gas, p = K_H x, and solubility of a gas falls as temperature rises.
- Physical equilibria are dynamic: both processes continue at equal rates, and a measurable property (vapour pressure, concentration of a saturated solution) stays constant.
- The equilibrium vapour pressure of a liquid at a given temperature does not depend on how much liquid is present, or on the volume of the vessel, as long as some liquid remains.
- Henry's law: p = K_H x, with p the partial pressure of the gas above the solution and x its mole fraction in solution; a larger K_H means a less soluble gas.
- K_H increases with temperature, so the solubility of gases in liquids decreases on heating (dissolving is usually exothermic).
- Solid-liquid equilibrium (ice and water) is at a fixed temperature for a given external pressure; liquid-gas equilibrium has the boiling point when vapour pressure equals the external pressure.
Syllabus line: EQUILIBRIUM Meaning of equilibrium is the concept of dynamic equilibrium. Equilibria involving physical processes: Solid-liquid, liquid-gas, gas-gas and solid-gas equilibria, Henry's law. General characteristics of equilibrium involving physical processes. Equilibrium involving chemical processes: Law of chemical equilibrium, equilibrium constants (Kp and Kc) and their significance, the significance of G and G [symbol missing in source text] in chemical equilibrium, factors affecting equilibrium concentration, pressure, temperature, the effect of catalyst, Le Chatelier's principle. Ionic equilibrium: Weak and strong electrolytes, ionization of electrolytes, various concepts of acids and bases (Arrhenius, Bronsted - Lowry and Lewis) and their ionization, acid-base equilibria (including multistage ionization) and ionization constants, ionization of water, pH scale, common ion effect, hydrolysis of salts and pH of their solutions, the solubility of sparingly soluble salts, solubility products and buffer solutions. (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 6 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Chemical equilibrium and the equilibrium constant: Dynamic equilibrium and the idea of equal forward and backward rates are built there. Read this first if equilibrium still sounds like a reaction that has stopped.
- Some basic concepts of chemistry (lesson planned): Mole fraction, moles from mass and molar mass are used in every Henry-law problem. Read this first if mole fraction is unfamiliar.
- Le Chatelier principle and reaction quotient: Why gas solubility falls on heating and rises with pressure is a Le Chatelier argument. Read this first if shifts of equilibrium are unclear.
Related topics
- Chemical equilibrium and the equilibrium constant
- Le Chatelier principle and reaction quotient
- Ionic equilibrium, pH and buffers
- Some Basic Concepts of Chemistry (lesson planned)
The concept step by step
Step 1: Equilibrium is a balance of two rates
A system is at dynamic equilibrium when two opposite processes go on at the same rate in a closed system at constant temperature, so no property you can measure changes with time. Nothing has stopped: molecules still cross between phases or react, but in both directions equally. A physical equilibrium involves a change of phase or of dissolved state only; no new substance forms.
Step 2: Solid-liquid and liquid-vapour equilibria
Ice and water in a closed, insulated flask at 1 atm sit at 273 K (0 C): the rate of melting equals the rate of freezing. A liquid in a closed vessel evaporates until the vapour pressure reaches a value fixed by the temperature; then evaporation and condensation rates are equal. This equilibrium vapour pressure does not depend on the amount of liquid or the vessel volume (provided some liquid remains). A liquid boils when its vapour pressure equals the external pressure.
Step 3: Solid-gas equilibrium and dissolving
A solid that sublimes, such as iodine, reaches equilibrium with its vapour in a closed vessel: the vapour pressure at a given temperature is fixed, as for liquids. A solid dissolving in a liquid reaches equilibrium when the solution is saturated, so the rate of dissolving equals the rate of crystallising and the concentration stays constant at that temperature. Gas-gas equilibrium means a gas mixture of fixed composition at constant partial pressures; reacting gas mixtures are treated with K_p and K_c in the chemical equilibrium lesson.
Step 4: A gas dissolving in a liquid obeys Henry's law
For a gas in equilibrium with its solution, the partial pressure p of the gas above the liquid is proportional to its mole fraction x in the solution: p = K_H x. K_H has the unit of pressure (bar or kPa) and depends on the gas, the solvent and the temperature. A large K_H means a small x at a given p, so a less soluble gas. Doubling the partial pressure doubles the dissolved amount. Use the partial pressure of that gas, not the total pressure of a mixture.
Step 5: Temperature and the solubility of gases
Dissolving a gas in a liquid is generally exothermic, so by Le Chatelier raising the temperature shifts the equilibrium towards the gas and the solubility falls. In Henry-law terms K_H increases with temperature, so for the same partial pressure x decreases. That is why a warm soda goes flat faster than a cold one. A mole fraction in dilute solution is x = n/(n + n_solvent), and for 1000 g of water n_solvent is 55.5 mol.
Step 6: General characteristics of physical equilibria
Common features: equilibrium needs a closed system (or at least one in which nothing escapes); it is reached from both sides; both opposing processes continue at equal rates; the measurable properties (vapour pressure, saturated concentration) are constant at constant temperature; and the value at equilibrium is characteristic of the system and the temperature. A catalyst does not change the equilibrium position; it only changes how fast it is reached.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
A gas G has K_H = 9.0 x 10⁴ bar in water at 298 K. Find its mole fraction in water when its partial pressure above the water is 0.90 bar.
| Step | Marks |
|---|---|
| Henry's law: p = K_H x, so x = p/K_H. | 1 |
| x = 0.90 bar / (9.0 x 10⁴ bar). | 1 |
| x = 1.0 x 10⁻5 (dimensionless). | 1 |
| Total: 3 marks | 3 |
Answer: x = 1.0 x 10⁻5
Fast method: Divide the pressure by K_H; the pressure unit cancels.
Sanity check: x has no unit because bar cancels. 0.90 is 10⁻5 of 9 x 10⁴, so a tiny x fits a sparingly soluble gas.
Example 2 (medium)
For the same gas, K_H = 9.0 x 10⁴ bar at 298 K. What partial pressure of G is needed to dissolve it to a mole fraction of 2.0 x 10⁻5?
| Step | Marks |
|---|---|
| Use p = K_H x. | 1 |
| p = 9.0 x 10⁴ bar x 2.0 x 10⁻5. | 1 |
| p = 1.8 bar. | 1 |
| Total: 3 marks | 3 |
Answer: p = 1.8 bar
Fast method: Double x from the previous example, so p doubles from 0.90 bar to 1.8 bar.
Sanity check: Check against the 0.90 bar example: twice the mole fraction needs twice the pressure, 1.8 bar; the pressure unit is bar because K_H is in bar.
Example 3 (medium)
Gas G (K_H = 9.0 x 10⁴ bar at 298 K) is at 0.90 bar above 1000 g of water (molar mass 18.0 g/mol, so 55.51 mol). How many moles of G dissolve? Use the exact relation x = n/(n + 55.51).
| Step | Marks |
|---|---|
| x = 0.90/9.0e4 = 1.0 x 10⁻5. | 1 |
| x = n/(n + 55.51), so n = 55.51 x/(1 - x). | 2 |
| n = 55.51 x 1.0e-5/(1 - 1.0e-5) = 5.55 x 10⁻4 mol. | 1 |
| Total: 4 marks | 4 |
Answer: n = 5.55 x 10⁻4 mol per 1000 g water
Fast method: x is tiny, so n is about x times 55.51 = 5.55e-4 mol with no correction needed.
Sanity check: n is far below 55.51 mol, so n + 55.51 is about 55.51 and the shortcut n = x times n_solvent agrees to 4 significant figures; mol is the correct unit.
Example 4 (medium)
A closed 10.0 L flask at 298 K holds excess liquid water. Its equilibrium vapour pressure at 298 K is 3.17 kPa. Taking R = 8.314 J/(mol K) and the vapour as ideal, find the mass of water in the vapour phase (molar mass 18.0 g/mol).
| Step | Marks |
|---|---|
| n = pV/RT with p = 3170 Pa and V = 0.0100 m³. | 1 |
| n = 3170 x 0.0100/(8.314 x 298) = 1.28 x 10⁻2 mol. | 2 |
| mass = 1.28e-2 mol x 18.0 g/mol = 0.230 g. | 1 |
| Total: 4 marks | 4 |
Answer: about 0.230 g of water vapour
Fast method: p V is 31.7 J, RT is 2477 J/mol, so n is about 0.0128 mol; times 18 gives 0.23 g.
Sanity check: Units: Pa x m³ = J, J divided by J/mol gives mol. 0.23 g in 10 L is a small amount compared with a litre of liquid, as expected for 3 kPa.
Example 5 (hard, multi-step)
Air at a total pressure of 5.0 bar contains a gas A at mole fraction 0.78 in the gas phase. K_H of A in water at 298 K is 7.0 x 10⁴ bar. Find the moles of A dissolved in 1000 g of water (55.51 mol), using the exact mole fraction relation.
| Step | Marks |
|---|---|
| Partial pressure of A: p = 0.78 x 5.0 bar = 3.9 bar (not 5.0 bar). | 2 |
| x = p/K_H = 3.9/7.0e4 = 5.57 x 10⁻5. | 1 |
| x = n/(n + 55.51) gives n = 55.51 x/(1 - x). | 2 |
| n = 3.09 x 10⁻3 mol. | 1 |
| Total: 6 marks | 6 |
Answer: n = 3.09 x 10⁻3 mol per 1000 g water
Fast method: n is about x times 55.51 = 5.57e-5 x 55.51 = 3.09e-3 mol; remember to use partial pressure.
Sanity check: Using total pressure 5.0 bar instead would give 3.96e-3 mol, about 28 percent too high; the partial pressure must come first. mol per 1000 g is the right unit.
Example 6 (hard)
At 293 K the K_H of a gas in water is 6.0 x 10⁴ bar and at 313 K it is 8.0 x 10⁴ bar. At the same partial pressure of 1.0 bar, by what factor does the mole fraction of the dissolved gas change on heating from 293 K to 313 K?
| Step | Marks |
|---|---|
| x = p/K_H at each temperature, with the same p. | 1 |
| x(293 K) = 1.0/6.0e4 = 1.67 x 10⁻5; x(313 K) = 1.0/8.0e4 = 1.25 x 10⁻5. | 2 |
| Ratio x(313 K)/x(293 K) = 6.0e4/8.0e4 = 0.75. | 1 |
| The dissolved amount falls to 0.75 of its value, a 25 percent decrease. | 1 |
| Total: 5 marks | 5 |
Answer: x falls by a factor of 0.75 (a 25 percent decrease)
Fast method: At fixed p, x is inversely proportional to K_H, so the ratio is K_H(293)/K_H(313) = 6/8 = 0.75.
Sanity check: The ratio is dimensionless and below 1, consistent with a gas being less soluble in warmer water. Limiting case: K_H unchanged would give a ratio of exactly 1.
Example 7 (hard, multi-step)
Gas G has K_H = 1.6 x 10³ bar in water at 298 K. A sealed bottle holds 1000 g of water (55.51 mol) with G at 3.0 bar above it. The pressure is reduced to 1.0 bar and equilibrium is re-established at 298 K. How many moles of G leave the solution? Use the exact relation x = n/(n + 55.51).
| Step | Marks |
|---|---|
| Initial x = 3.0/1.6e3 = 1.875 x 10⁻3; final x = 1.0/1.6e3 = 6.25 x 10⁻4. | 2 |
| n = 55.51 x/(1 - x): n(3.0 bar) = 0.1043 mol; n(1.0 bar) = 0.03472 mol. | 2 |
| Gas released = 0.1043 - 0.03472 = 0.0696 mol. | 1 |
| Total: 5 marks | 5 |
Answer: about 0.0696 mol of G leaves the solution
Fast method: The dissolved amount is proportional to p, so it falls to one third; n(3 bar) is about 0.104 mol, so the loss is two thirds of that, 0.0695 mol.
Sanity check: The loss is positive, as it must be when pressure drops; the two thirds shortcut gives 0.0695 mol and the exact calculation 0.0696 mol, differing by the small correction 1 - x.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Henry's law | p = K_H x | Dilute solution of a gas in a liquid; p is partial pressure of that gas | p and K_H in bar (or kPa); x dimensionless | Example 1 |
| Mole fraction of dissolved gas | x = n/(n + n_solvent); dilute: x = n/n_solvent | Dilute solutions only; use full form when n is not small | dimensionless | Example 3 |
| Moles of solvent in 1000 g water | n_solvent = 1000/18.0 = 55.5 mol | Water as solvent; molar mass 18.0 g per mol | mol | Example 3 |
| Partial pressure in a mixture | p_A = y_A x P_total | Ideal mixture of gases; y_A is the mole fraction in the gas phase | bar | Example 5 |
| Moles of vapour at vapour pressure | n = pV/RT (liquid still present) | Vapour treated as ideal gas, liquid still present, temperature in kelvin | p in Pa, V in m³, R = 8.314 J/(mol K), T in K | Example 4 |
| Boiling | vapour pressure = external pressure | not applicable | bar or kPa | none |
| Temperature effect on gas solubility | K_H increases as T increases, so x at fixed p decreases | Gases that dissolve with release of heat; compared at the same partial pressure | n/a (qualitative) | Example 6 |
| Comparing two conditions | x2/x1 = (p2/p1)(K_H1/K_H2) | Same gas and solvent; K_H taken at each temperature | dimensionless | Example 6 |
Common mistakes and speed
- Using the total pressure of a gas mixture in p = K_H x instead of the partial pressure of the gas that dissolves. Why it tempts: The stem gives one pressure figure, and p is the symbol in the formula, so the total is plugged in without asking which gas the law applies to.
- Saying that gas solubility increases on heating because solids dissolve better when hot. Why it tempts: The rule for solids is learnt first and feels general; but dissolving a gas is exothermic and K_H increases with temperature.
- Believing that the equilibrium vapour pressure doubles when the volume of the closed flask doubles with liquid still present. Why it tempts: Boyle-type thinking suggests pressure changes with volume; in fact more liquid evaporates and the pressure returns to the same value, only the moles of vapour change.
- Treating a larger K_H as a more soluble gas. Why it tempts: In the K_a or K_sp world a larger constant means more product; here K_H sits on the pressure side, so larger K_H means smaller x.
- Calling a physical equilibrium static because the visible amounts do not change. Why it tempts: Constant levels in a closed flask look like nothing is happening; both opposing processes continue at equal rates.
Time per question and fast method
Target: about 90 seconds per question.
Write p = K_H x at once. For a mixture find the partial pressure (mole fraction times total) first. For a dilute solution moles are x times the moles of solvent (55.5 mol per 1000 g of water). For comparisons at one pressure, x varies as 1/K_H; at one temperature, x varies as p. For a closed vessel with liquid still present the vapour pressure stays constant and n = pV/RT scales with V.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 5 correct. Pick an option for each question.
Practice
- At 298 K the Henry's law constant K_H of a gas A in water is 4.0 x 10⁴ bar. The partial pressure of A above… Verified (T1)
- A closed 2.0 L flask at 300 K contains excess liquid X in equilibrium with its vapour, which behaves ideally… Verified (T1)
- A gas mixture at total pressure 8.0 bar contains gas A at mole fraction 0.25. At 298 K, K_H of A in water is… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Dynamic equilibrium and what stays constant
Dynamic equilibrium is the state in which the rate of a process equals the rate of its reverse in a closed system at constant temperature. The microscopic changes go on; the macroscopic properties do not. For physical equilibria the constant quantities are the temperature at which two phases coexist (at a given external pressure), the vapour pressure of a liquid or a subliming solid at a given temperature, and the concentration of a saturated solution. Equilibrium can be approached from either side: a closed flask that holds only vapour above excess liquid, or only liquid, ends at the same vapour pressure. In an open system the vapour escapes and no equilibrium is set up.
Solid-liquid, liquid-vapour and solid-vapour equilibria
Solid-liquid: at normal atmospheric pressure ice and water coexist at 273.15 K; the melting temperature changes only slightly with pressure. Liquid-vapour: the equilibrium vapour pressure rises steeply with temperature; the normal boiling point is the temperature at which it equals 1.013 bar. At a given temperature the vapour pressure of a liquid in a closed vessel is the same in a 1 L flask and a 10 L flask, as long as some liquid is left; only the amount of vapour changes, by n = pV/RT. Solid-vapour: a sublimating solid such as iodine gives a fixed vapour pressure at each temperature. Dissolving a solid in a liquid reaches equilibrium at saturation, and the solubility depends on temperature.
Henry's law and its limits
Henry's law: p = K_H x, where x is the mole fraction of the dissolved gas and p its partial pressure. It can also be written as solubility proportional to pressure. For a dilute solution x = n/(n + n_solvent) is close to n/n_solvent, but for exact work use the full form. The law holds for sparingly soluble gases at moderate pressure and fails for gases that react with the solvent (NH3 or HCl in water) because the reacted portion is not simply proportional to p. Typical use: given K_H and the partial pressure, find x and then moles or mass per kilogram of water; or find how much gas escapes when the pressure drops. The partial pressure is mole fraction in the gas phase times total pressure.
Temperature effect and what examiners test
Because dissolving a gas is exothermic, K_H rises with temperature and the solubility falls; that is an equilibrium (Le Chatelier) statement, and the reverse holds on cooling. Do not carry over the rule for solids: the solubility of most solids increases with temperature. Typical JEE Main items: compute x or moles from p = K_H x; compare solubilities at two pressures or two temperatures; identify the correct statement among characteristics of physical equilibrium (constant vapour pressure, equal rates, closed system); and reason about vapour pressure when the volume of the vessel is changed with liquid still present. State constants such as K_H and R in every numerical solution. Units: p and K_H in the same pressure unit (bar), x dimensionless.
Memory hook
Suppose you buy a bottle of soda at a bus stand in Pune on a hot afternoon and your friend shakes it, and later you open one cold bottle and one warm bottle side by side.
- Before the cap is opened, the gas above the liquid and the gas dissolved in it are in balance: as many gas molecules enter the drink as leave it. The high pressure in the bottle keeps that much gas dissolved.
- When you open the bottle the pressure above falls, so the balance shifts and gas leaves the liquid as bubbles until a new balance with the outside air is reached.
- The warm bottle fizzes over and goes flat sooner than the cold one, because warmth lowers how much gas the liquid can hold at the same pressure.
Dissolved gas stays in balance with the gas above it, so lower pressure or higher temperature pushes it out: p = K_H x, and K_H rises with temperature.
Pressure presses gas into the liquid, and heat chases it out.
Revision card
Try to answer each without looking above.
- Define dynamic equilibrium and name two measurable properties that stay constant in a physical equilibrium.
- State what fixes the vapour pressure of a liquid in a closed vessel and what does not.
- Write Henry's law and say whether a larger K_H means a more or a less soluble gas.
- How do you find moles of dissolved gas per 1000 g of water from p and K_H?
- State how temperature changes K_H and the solubility of a gas, and give the reason.
- List the general characteristics of a physical equilibrium (closed system, equal rates, constant properties).
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (see content/reviews/scope-audit-2026-11-20.md)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 1; fixed: 1
- Report: content/reviews/learn2-eqm-2026-11-20.md
Textbook references
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.1.5 General Characteristics of Equilibria Involving Physical Processes (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.1.2 Liquid-Vapour Equilibrium (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.1.4 Equilibrium Involving Dissolution of Solid or Gases in Liquids (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.1.1 Solid-Liquid Equilibrium (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 6 (text copied from syllabus/lines/jee-main/2026.json, id jee-main-2026-U40)
- NCERT Class 11 Chemistry, Equilibrium chapter (read as a reference for scope; content written fresh)
- Standard result: Henry's law p = K_H x and the rise of K_H with temperature; textbook section reference pending
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.