Le Chatelier Principle and Q: JEE Main Chemistry Notes
Reviewed Last updated 2026-11-20. Syllabus topic: Le Chatelier principle and reaction quotient.
In short. Le Chatelier principle says an equilibrium disturbed by a change shifts to oppose it. The reliable method is to compute Q after the change and compare it with K: Q less than K goes forward, Q greater than K goes backward. Only temperature changes K.
- Q has the form of K but uses the instantaneous concentrations or pressures; Q less than K means net forward, Q greater than K means net backward.
- Adding a reactant or removing a product shifts the reaction forward; compressing a gas mixture shifts it towards fewer moles of gas; delta n = 0 gives no pressure effect.
- Raising the temperature favours the endothermic direction: K increases if delta H is positive and decreases if delta H is negative; delta G standard = -RT ln K links K to Gibbs energy.
- Inert gas at constant volume changes nothing; at constant total pressure it enlarges the volume and favours the side with more moles of gas.
- A catalyst and the amount of a pure solid or liquid change neither K nor the equilibrium composition.
Syllabus line: EQUILIBRIUM Meaning of equilibrium is the concept of dynamic equilibrium. Equilibria involving physical processes: Solid-liquid, liquid-gas, gas-gas and solid-gas equilibria, Henry's law. General characteristics of equilibrium involving physical processes. Equilibrium involving chemical processes: Law of chemical equilibrium, equilibrium constants (Kp and Kc) and their significance, the significance of delta G and delta G standard in chemical equilibrium, factors affecting equilibrium concentration, pressure, temperature, the effect of catalyst, Le Chatelier's principle. Ionic equilibrium: Weak and strong electrolytes, ionization of electrolytes, various concepts of acids and bases (Arrhenius, Bronsted - Lowry and Lewis) and their ionization, acid-base equilibria (including multistage ionization) and ionization constants, ionization of water, pH scale, common ion effect, hydrolysis of salts and pH of their solutions, the solubility of sparingly soluble salts, solubility products and buffer solutions. (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 6 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Chemical equilibrium and the equilibrium constant: Q and K are written in the same way. Read this first if you cannot write K_c or find delta n.
- Entropy, Gibbs energy and spontaneity: The sign of delta H decides how K moves with temperature. Read this first if exothermic and endothermic signs are unclear.
- First law, enthalpy and calorimetry: Read this first if you do not know what delta H positive means for heat absorbed.
Related topics
The concept step by step
Step 1: Equilibrium is a balance that can be upset
At equilibrium the forward and backward rates are equal, so the amounts stay fixed. If you change something (add a reactant, squeeze the vessel, heat it), the two rates are no longer equal, the amounts move for a while and then a new equilibrium is reached. Le Chatelier principle is a quick way to say which direction that move takes.
Step 2: Q is the exact referee, the principle is the shortcut
The reaction quotient Q is written exactly like K, but with the amounts present right now. After any disturbance, work out Q. If Q is less than K there are too many reactants for this K, so the net reaction goes forward. If Q is more than K it goes backward. When Q equals K nothing moves. Every Le Chatelier statement below can be checked this way, so you never have to memorise blindly.
Step 3: Concentration changes
Add a reactant (or remove a product): the denominator of Q grows (or the numerator shrinks), so Q falls below K and the reaction goes forward, using up part of what was added. Remove a reactant (or add a product): Q rises above K and the reaction goes backward. K itself does not change. Note that the added substance is only partly used up, so its new amount is still higher than before.
Step 4: Pressure and volume changes (gases only)
Halve the volume of a gas mixture at constant temperature and every concentration doubles. Q changes by the factor 2 raised to the power delta n, where delta n is the change in moles of gas. If delta n is positive Q is multiplied by 2 to the power delta n, which is more than 1, so Q rises above K and the reaction goes backward, towards fewer gas moles. If delta n is negative the reaction goes forward, again towards fewer moles. If delta n is zero, Q is unchanged and there is no shift. Raising pressure by adding a gas that takes part in the reaction is a concentration change, not a volume change.
Step 5: Temperature is the only change that alters K
Treat heat as a reactant in an endothermic reaction (delta H positive) and as a product in an exothermic one (delta H negative). Raising the temperature pushes the equilibrium towards the heat-absorbing side: K increases for an endothermic reaction and decreases for an exothermic one. The size of K at a given temperature follows from delta G standard = -RT ln K with R = 8.314 J/(mol K), so a change in K means a change in delta G standard at the new temperature.
Step 6: Inert gas, catalyst and pure solids
A catalyst speeds both directions equally, so K and the final composition are unchanged; only the time to reach equilibrium falls. Adding an inert gas at constant volume leaves every concentration unchanged, so Q equals K and nothing shifts. Adding an inert gas at constant total pressure forces the volume to grow, which dilutes the reacting gases, so the reaction goes towards more moles of gas (for delta n zero, no shift). Adding or removing a pure solid or liquid does not change Q, so there is no shift.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
For H2(g) + I2(g) = 2HI(g), K_c = 49 at a certain temperature. A 1.0 L vessel contains 0.20 mol H2, 0.20 mol I2 and 1.0 mol HI. Find Q and say in which direction the net reaction goes.
| Step | Marks |
|---|---|
| Write Q = [HI]²/([H2][I2]) using the present concentrations. | 1 |
| Volume is 1.0 L, so concentrations equal the moles: Q = (1.0)²/(0.20 x 0.20) = 1.0/0.040. | 1 |
| Q = 25, which is less than K_c = 49, so the net reaction goes forward (more HI forms). | 1 |
| Total: 3 marks | 3 |
Answer: Q = 25 (no units, delta n = 0); less than 49, so net forward
Fast method: Square the HI amount and divide by the product of the other two: 1/0.04 = 25, then compare with 49.
Sanity check: Delta n = 0 so Q has no units. The mixture is rich in HI already, yet Q is still below 49, so the system must still be short of HI; forward is consistent.
Example 2 (medium)
In a 1.0 L vessel at equilibrium, H2(g) + I2(g) = 2HI(g) has 0.10 mol H2, 0.10 mol I2 and 0.70 mol HI (K_c = 49). Then 0.20 mol of H2 is added at the same temperature. Find the new equilibrium [HI] in mol/L.
| Step | Marks |
|---|---|
| Right after the addition H2 = 0.30 mol/L, so Q = (0.70)²/(0.30 x 0.10) = 16.3, less than 49: the reaction goes forward. | 1 |
| ICE with change x: [H2] = 0.30 - x, [I2] = 0.10 - x, [HI] = 0.70 + 2x. | 1 |
| (0.70 + 2x)²/((0.30 - x)(0.10 - x)) = 49 gives 45x² - 22.4x + 0.98 = 0, so x = (22.4 - 18.04)/90 = 0.0485 (the other root exceeds 0.10 and is rejected). | 2 |
| [HI] = 0.70 + 2(0.0485) = 0.797 mol/L, which is about 0.80 mol/L. | 1 |
| Total: 5 marks | 5 |
Answer: about 0.797 mol/L (H2 = 0.252, I2 = 0.0515 mol/L)
Fast method: Do not try a perfect-square shortcut here, the H2 and I2 amounts differ. Set up the quadratic once and take the smaller root.
Sanity check: HI rose from 0.70 to 0.797, but only by 0.097 mol/L, less than the 0.20 mol H2 added, and I2 fell to 0.0515 mol/L, still positive. Substituting back: 0.797²/(0.2515 x 0.0515) = 49.
Example 3 (medium)
For N2O4(g) = 2NO2(g), K_c = 0.0060 mol/L at a fixed temperature, and the equilibrium [N2O4] is 0.10 mol/L. The vessel volume is suddenly halved at constant temperature. Find Q/K just after compression and the direction of the shift.
| Step | Marks |
|---|---|
| Equilibrium [NO2] = sqrt(0.0060 x 0.10) = 0.0245 mol/L. | 1 |
| Halving the volume doubles each concentration: [N2O4] = 0.20, [NO2] = 0.0490 mol/L. | 1 |
| Q = (0.0490)²/0.20 = 0.0120 mol/L, so Q/K = 2. | 1 |
| Q is greater than K, so the net reaction goes backward (towards N2O4, fewer gas moles); Q/K = 2. | 1 |
| Total: 4 marks | 4 |
Answer: Q/K = 2; backward (towards N2O4); K unchanged
Fast method: For delta n = +1 compressing to half volume multiplies Q by 2, so Q/K = 2 straight away.
Sanity check: Q/K = 2 equals 2 raised to delta n (= +1), as it should for a halving of volume. Units of Q are mol/L, the same as K_c.
Example 4 (medium)
At 298 K a reaction has delta G standard = -11.4 kJ/mol. Using R = 8.314 J/(mol K), find K, and find delta G in kJ/mol for a mixture with Q = 10 at 298 K.
| Step | Marks |
|---|---|
| delta G standard = -RT ln K, so ln K = 11400/(8.314 x 298) = 4.601. | 1 |
| K = e⁴.601 = 99.6, about 100. | 1 |
| delta G = RT ln(Q/K) = 8.314 x 298 x ln(10/99.6) = -5.70 kJ/mol. | 1 |
| delta G is negative because Q is below K, so the reaction goes forward: delta G = -5.70 kJ/mol. | 1 |
| Total: 4 marks | 4 |
Answer: K about 99.6; delta G about -5.70 kJ/mol (forward)
Fast method: RT ln 10 = 5.70 kJ/mol; K is about 10 x 10, so ln(Q/K) = ln(1/10) and delta G is -5.7 kJ/mol.
Sanity check: Negative delta G standard gives K greater than 1, as it should. Q = 10 is below K = 99.6, so the reaction runs forward, matching the negative delta G; units kJ/mol.
Example 5 (hard, multi-step)
A 1.0 L vessel at a temperature where K_c = 49 for H2(g) + I2(g) = 2HI(g) contains 0.50 mol H2, 0.50 mol I2 and 1.00 mol HI. Decide the direction of reaction from Q and then find the equilibrium amount of HI in mol.
| Step | Marks |
|---|---|
| Q = (1.00)²/(0.50 x 0.50) = 4, which is less than 49: the net reaction goes forward. | 1 |
| ICE: [H2] = [I2] = 0.50 - x and [HI] = 1.00 + 2x. | 1 |
| K = (1.00 + 2x)²/(0.50 - x)² = 49 is a perfect square, so (1.00 + 2x)/(0.50 - x) = 7 (positive root). | 2 |
| 1.00 + 2x = 3.50 - 7x gives x = 2.5/9 = 0.278 mol, so HI = 1.00 + 0.556 = 1.56 mol. | 1 |
| Total: 5 marks | 5 |
Answer: about 1.56 mol HI (1.556 mol)
Fast method: Spot the perfect square (K = 49 and delta n = 0, equal H2 and I2): take the square root of both sides and solve a linear equation.
Sanity check: HI rises from 1.00 to 1.56 mol, in line with Q below K. H2 and I2 are each 0.222 mol (positive). Check: 1.556²/0.222² = 49.0. Total moles are unchanged at 2.00, as required for delta n = 0.
Example 6 (hard, multi-step)
For N2O4(g) = 2NO2(g), K_p = 0.14 atm. Start with 1.0 mol N2O4 and 1.0 mol argon, with the total pressure held at 1.0 atm. Find the degree of dissociation of N2O4 and compare it with 0.184, the value without argon at 1.0 atm.
| Step | Marks |
|---|---|
| At equilibrium N2O4 = 1 - a, NO2 = 2a, Ar = 1, so total moles = 2 + a. | 1 |
| K_p = (p of NO2)²/(p of N2O4) = [2a/(2+a)]² P / [(1-a)/(2+a)] = 4a² P/((1 - a)(2 + a)). | 2 |
| With P = 1.0 and K_p = 0.14: 4a² = 0.14(2 - a - a²), so 4.14a² + 0.14a - 0.28 = 0 and a = (-0.14 + 2.158)/8.28 = 0.244. | 2 |
| a = 0.244 is greater than 0.184, so argon at constant pressure increases the dissociation (at constant volume it would stay 0.184). | 1 |
| Total: 6 marks | 6 |
Answer: about 0.244 (24.4 percent), up from 0.184
Fast method: Write Kp with total moles n_T: Kp = 4a² P/((1 - a) n_T) with n_T = 1 + a + moles of inert. Only n_T changes with the inert gas.
Sanity check: Limit check: with no argon n_T = 1 + a and the formula reduces to 4a² P/(1 - a²), which gave 0.184. More inert moles mean a larger n_T and so a larger a, as Le Chatelier predicts.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Reaction quotient | Q = [C]ᶜ [D]ᵈ/([A]ᵃ [B]ᵇ) with present values | Any reaction mixture, using the present concentrations or pressures | same as K, (mol/L)^(delta n) | Example 1 |
| Direction rule | Q K backward | Compare Q with K at the same temperature | dimensionless comparison | Example 1 |
| Volume change by factor f (V to fV) | Q_new/Q_old = (1/f)^(delta n) | Sudden volume change of gases at constant temperature | dimensionless | Example 3 |
| Temperature effect on K | delta H positive: K increases with T; delta H negative: K decreases with T; delta G standard = -RT ln K | K depends on temperature only; delta H taken as constant over the range | qualitative; delta G in J/mol with R = 8.314 J/(mol K) | none |
| Gibbs energy link | delta G = RT ln(Q/K); delta G(standard) = -RT ln K | Standard state; K is thermodynamic constant at the given temperature | J/mol | Example 4 |
| Inert gas at constant total pressure | K_p = (product of xᶜoefficient) P^(delta n) with total moles including the inert gas | Ideal gases at constant total pressure with an inert gas added | atm^(delta n) | Example 6 |
| Effect summary | reactant added: forward; endothermic and T up: forward, K up; exothermic and T up: backward, K down | not applicable | n/a (qualitative) | none |
| No-shift cases | catalyst; inert gas at constant volume; pure solid or liquid added; pressure change when delta n = 0 | not applicable | none | none |
Common mistakes and speed
- Saying K changes when the pressure, volume or concentration is changed. Why it tempts: The equilibrium composition visibly changes, so it feels as if the constant must change too; only temperature changes K.
- Saying that adding an inert gas always shifts the equilibrium (or never does). Why it tempts: Total pressure rises in both cases; the difference is whether the volume stays fixed (no shift) or the pressure stays fixed (shift towards more gas moles).
- Using the sign of delta H the wrong way for the effect of temperature, or forgetting that an exothermic reaction has K falling as T rises. Why it tempts: Higher temperature sounds like it should always favour more product, and the rule of treating heat as a reactant or product is easy to reverse.
- Predicting a pressure shift for a reaction with delta n = 0, or counting solids and liquids when finding delta n. Why it tempts: Compression is linked in memory with a shift to the right, but the shift exists only where the gas moles differ.
- Thinking a catalyst increases the yield of product. Why it tempts: A catalyst makes the reaction faster, and faster is mistaken for more; it only reduces the time to reach the same equilibrium.
- Believing that after adding a reactant the new amount of that reactant is back to its old value. Why it tempts: The principle says the system opposes the change, but it only partly cancels it, so the reactant stays above the old value.
Time per question and fast method
Target: about 90 seconds per question.
Decide the direction before any arithmetic: for concentration or volume changes compare Q with K using the power of the factor (volume halved multiplies Q by 2 raised to delta n); for temperature use the sign of delta H alone; for inert gas ask first whether the volume or the pressure is held constant. Compute only when the stem asks for an amount.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 5 correct. Pick an option for each question.
Practice
- A 2.0 L vessel at 700 K contains 1.0 mol H2, 1.0 mol I2 and 2.0 mol HI. For H2(g) + I2(g) = 2HI(g), K_c = 50.… Verified (T1)
- For N2O4(g) = 2NO2(g) at constant temperature, an equilibrium mixture in a cylinder has [N2O4] = 0.100 mol/L… Verified (T1)
- For a reaction at 298 K, K = 1.0 x 10⁴. In a mixture where the reaction quotient Q = 10, taking R = 8.314… Verified (T1)
- For N2O4(g) = 2NO2(g) at equilibrium, the partial pressures are 0.50 atm of N2O4 and 1.0 atm of NO2. The… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Statement and scope of Le Chatelier principle
If a system at equilibrium is subjected to a change of concentration, pressure (volume) or temperature, the equilibrium shifts in the direction that partly opposes the change. It is a qualitative rule for closed systems at equilibrium. It tells the direction of the shift and nothing about how large it is, and it says 'partly': the new equilibrium never completely cancels the disturbance. It does not apply to a catalyst, which does not disturb the position of equilibrium, and it is unreliable when a change affects several quantities at once (for example adding a reactant that also changes the volume); in such cases compute Q. The principle is a consequence of thermodynamics and of the relation delta G = RT ln(Q/K): the system moves in the direction in which delta G is negative.
Concentration, pressure and volume effects
Adding a reactant or removing a product at constant volume shifts the reaction forward; the reverse change shifts it backward. For gases, reducing the volume (raising the pressure) at constant temperature favours the side with fewer moles of gas; increasing the volume favours the side with more moles. If the moles of gas are equal on both sides (delta n = 0, as in H2 + I2 = 2HI) there is no shift, though all the concentrations change. Shifts for gas reactions: N2 + 3H2 = 2NH3 (delta n = -2) moves forward on compression; N2O4 = 2NO2 (delta n = +1) moves backward on compression; PCl5 = PCl3 + Cl2 moves backward on compression. Adding more of one reactant increases the conversion of the other reactants but lowers the fractional conversion of the substance added. Pure solids and liquids do not enter Q, so changing their amount does not shift the equilibrium.
Temperature and the sign of delta H
Temperature is the only factor that changes the value of K. For an endothermic reaction (delta H positive) K increases with temperature, so more products are present at equilibrium at higher temperature. For an exothermic reaction (delta H negative) K decreases as the temperature rises. Treating heat as a reactant or product (and using delta G standard = -RT ln K only to link K to delta G), a positive delta H makes K larger as T rises and a negative delta H makes it smaller; the exact size of the change is not asked at this level. Two checks: for delta H positive and T2 greater than T1, K2 is greater than K1; the temperature dependence is steeper for larger magnitude of delta H. Cooling an exothermic equilibrium raises the yield but slows the rate, which is why industrial processes use a compromise temperature and a catalyst.
Inert gas, catalyst and the reaction quotient
Inert gas at constant volume: the number of moles of the inert gas rises but the concentration (and partial pressure) of every reacting gas is unchanged, so Q equals K and there is no shift, even though the total pressure increases. Inert gas at constant total pressure: the volume must increase, the partial pressures of the reacting gases fall, and the reaction shifts towards the side with more moles of gas (no shift if delta n = 0). A catalyst lowers the activation energy of both forward and backward reactions equally, so it changes neither K nor the equilibrium composition. The reaction quotient Q is calculated like K from the instantaneous concentrations: Q less than K forward, Q greater than K backward. The relation delta G = RT ln(Q/K) shows why: delta G is negative when Q is less than K.
What examiners test and edge cases
Typical JEE Main items: the direction of shift for a stated change in a named reaction (for example the effect of raising the temperature or the pressure on a given equilibrium), which change increases the yield of a named product, whether K changes (only for temperature), the effect of an inert gas at constant volume versus constant pressure, the direction of a reaction from Q and K, and numerical questions that recompute the equilibrium amounts after an addition. Edge cases: adding a solid does nothing; a catalyst does nothing to K; increasing pressure on delta n = 0 does nothing; if the question says 'the volume is doubled' the concentration of each gas halves and Q changes by 2 raised to minus delta n; the amount of a reactant in the new equilibrium after adding more of it is greater than the old amount but less than old plus added.
Memory hook
Suppose two water tanks on a terrace in Jaipur are joined by a pipe near the bottom, and the water level is the same in both.
- You pour a bucket of water into the left tank. The left level rises, and water starts flowing through the pipe to the right tank.
- The flow continues until the levels settle again. The right tank has taken some of the extra water, but not all of it, so the left tank still ends a little higher than before.
- If you take a bucket out of the right tank, water flows right and the system again settles somewhere between the old and the disturbed level.
The system moves to oppose the disturbance but only partly cancels it, and the pipe finds the new balance on its own. In the same way an equilibrium shifts after a change and settles at a new composition.
Disturb a balance and it moves to undo the change, but never all the way.
Revision card
Try to answer each without looking above.
- State how Q is compared with K to find the direction of net reaction.
- What is the effect on a gaseous equilibrium of compressing it when delta n is positive, negative or zero?
- How does the sign of delta H decide the change of K with temperature?
- Compare inert gas added at constant volume with inert gas added at constant total pressure.
- Which changes alter K and which only alter Q?
- Why does a catalyst not change the composition at equilibrium?
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (see content/reviews/scope-audit-2026-11-20.md)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 0; fixed: 0
- Report: content/reviews/learn2-eqm-2026-11-20.md
Textbook references
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.6.2 Predicting the Direction of the Reaction (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.8.1 Effect of Concentration Change (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.8.2 Effect of Pressure Change (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.8.3 Effect of Inert Gas Addition (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.8.4 Effect of Temperature Change (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.8.5 Effect of a Catalyst (read 2026-11-22)
- NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 6: Equilibrium, 6.8 Factors Affecting Equilibria (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 6 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
- NCERT Class 11 Chemistry, Equilibrium chapter (read as a reference for scope; content written fresh)
- Standard result: delta G standard = -RT ln K and delta G = RT ln(Q/K); textbook section reference pending
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.