EngineeringRise

Periodic Trends: Radii, IE, EGE, Oxidation States

Reviewed Last updated 2026-11-21. Syllabus topic: Periodic trends: radii, ionisation enthalpy, electron gain enthalpy, valence and oxidation states.

In short. Across a period radius falls and ionisation enthalpy rises; down a group radius rises and ionisation enthalpy falls. Standard exceptions: Be above B, N above O, Mg above Al in ionisation enthalpy, and Cl more negative than F in electron gain enthalpy.

  • Atomic radius: decreases left to right in a period, increases down a group; ionic radius in an isoelectronic series falls as Z rises.
  • Ionisation enthalpy: increases across a period with dips at B (after Be), O (after N) and Al (after Mg); a huge jump marks the removal of a core electron.
  • Electron gain enthalpy: generally more negative across a period, most negative for Cl (F is less negative); Be, N and noble gases are positive or near zero; the second gain is always positive.
  • Maximum oxidation state of a main-group element is usually its number of valence electrons (exceptions: F shows only -1, O shows positive states only with F); for non-metals the minimum is that number minus 8.
  • Transition elements show variable oxidation states because (n-1)d and ns electrons are close in energy.

Syllabus line: CLASSIFICATION OF ELEMENTS AND PERIODICITY IN PROPERTIES Modern periodic law and present form of the periodic table, s, p. d and f block elements, periodic trends in properties of elements atomic and ionic radii, ionization enthalpy, electron gain enthalpy, valence, oxidation states and chemical reactivity. (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 9 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

Related topics

The concept step by step

  1. Step 1: The one idea behind every trend is effective nuclear charge

    An outer electron feels the nuclear charge Z reduced by the shielding of inner electrons. The remainder is the effective nuclear charge, Zeff. Across a period, Z rises by one each step while the electron enters the same shell, which shields poorly, so Zeff rises. Down a group the outer shell is farther from the nucleus and the core shields strongly, so the pull falls even though Z increases. Radius, ionisation and gain of electrons all follow.

  2. Step 2: Atomic and ionic radius

    Atomic radius falls across a period (Zeff up) and rises down a group (new shell). For one element, van der Waals radius is larger than metallic, which is larger than covalent. A cation is smaller than its atom (fewer electrons, same nucleus) and an anion is larger (more repulsion). Among isoelectronic species the radius falls as Z rises: N3- > O2- > F- > Na+ > Mg2+ > Al3+. A noble gas radius is a van der Waals value and is not comparable with covalent radii.

  3. Step 3: Ionisation enthalpy and its dips

    First ionisation enthalpy is the energy to remove one electron from a gaseous atom. It rises across a period with three standard dips: boron below beryllium (the 2p electron is easier to remove than a 2s electron), oxygen below nitrogen (paired electron repulsion in 2p4 against the stable half-filled 2p3), and aluminium below magnesium (3p against 3s). Down a group it falls. Successive values always rise, with a sudden jump after the valence electrons are gone.

  4. Step 4: Electron gain enthalpy, sign and exceptions

    Electron gain enthalpy is the enthalpy change when a gaseous atom takes up an electron; a large negative value means the process releases much energy. It is most negative for the halogens. Chlorine is more negative than fluorine because the small 2p subshell of F repels the incoming electron; similarly S is more negative than O. Be, N and the noble gases have positive or near-zero values because of a filled or half-filled subshell or a filled shell. The second gain, O- to O2-, is endothermic.

  5. Step 5: Valence, oxidation states and reactivity

    For main-group elements the maximum oxidation state equals the number of valence electrons (+7 for chlorine) and the minimum for non-metals is that number minus 8 (-1 for chlorine). Transition elements show several oxidation states because the (n-1)d and ns electrons are close in energy; the highest oxidation state of the early members is the sum of d and s electrons (+7 for Mn). Metallic reactivity rises down a group and falls across a period; non-metallic reactivity does the opposite. Oxides change from basic to acidic across a period.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

Among the isoelectronic ions N3-, O2-, F- and Na+, which has the largest radius, and what is its atomic number?

Marks-style solution of example 1
StepMarks
Count electrons: N3- (7 + 3 = 10), O2- (10), F- (10), Na+ (11 - 1 = 10); all have 10 electrons.1
For equal electrons the radius falls as Z rises, so the largest radius belongs to the smallest Z.1
Largest radius: N3- with Z = 7.1
Total: 3 marks3

Answer: N3-, Z = 7

Fast method: The ion with the fewest protons is the biggest.

Sanity check: N3- has 7 protons holding 10 electrons, the weakest pull in the set, so the largest size is plausible.

Example 2 (easy)

The successive ionisation enthalpies of an element (kJ per mol) are 738, 1451, 7733 and 10543. How many valence electrons does it have?

Marks-style solution of example 2
StepMarks
Compute ratios: 1451 / 738 = 1.97, 7733 / 1451 = 5.33, 10543 / 7733 = 1.36.1
The big jump is after the 2nd value, so two electrons are valence electrons.1
The element has 2 valence electrons (group 2, magnesium).1
Total: 3 marks3

Answer: 2

Fast method: Look for the largest jump: 1451 to 7733.

Sanity check: Group 2 elements lose two electrons easily and the third ionisation enthalpy is several times larger.

Example 3 (medium)

For sulphur, the first electron gain enthalpy is -200 kJ per mol and the second is +649 kJ per mol. Find the enthalpy change for S(g) + 2e- giving S2-(g). Is the gaseous S2- ion stable?

Marks-style solution of example 3
StepMarks
Add the steps: -200 + 649 = +449 kJ per mol.2
The overall change is positive (endothermic), so the gaseous S2- is not stable relative to S + 2e-.1
S2- exists in solids because lattice enthalpy compensates for the +449 kJ per mol.1
Total: 4 marks4

Answer: +449 kJ per mol; not stable in the gas phase

Fast method: Add the two signed numbers.

Sanity check: The second gain is positive because an electron enters a negative ion, as for oxygen (+780 for the second gain, +639 overall with -141 for the first), and +449 is smaller than oxygen's +639 overall, consistent with S being larger.

Example 4 (medium)

First ionisation enthalpies (kJ per mol): Li 520, Be 900, B 801, C 1086, N 1402, O 1314, F 1681, Ne 2081. How many elements here have a first ionisation enthalpy lower than that of the preceding element?

Marks-style solution of example 4
StepMarks
Compare each element with the previous one: Be 900 > 520, B 801 801.1
N 1402 > 1086, O 1314 1314, Ne 2081 > 1681.1
The decreases occur at B and O: 2 elements.1
Total: 3 marks3

Answer: 2 (B and O)

Fast method: The two dips are B after Be and O after N.

Sanity check: Across a period the overall trend is upward (520 to 2081); two dips out of seven steps is the standard pattern.

Typical trap: Assuming ionisation enthalpy rises steadily because the nuclear charge rises, and counting zero dips; or counting Ne or Li as dips. The 2s filled subshell and the 2p half-filled subshell cause the two dips.

Example 5 (hard, multi-step)

Second and third ionisation enthalpies (kJ per mol): Be 1757 and 14849; Mg 1451 and 7733; B 2427 and 3660; Al 1817 and 2745. Which element has the largest ratio IE3 / IE2, and what is that ratio?

Marks-style solution of example 5
StepMarks
Compute IE3 / IE2: Be 14849 / 1757 = 8.45; Mg 7733 / 1451 = 5.33; B 3660 / 2427 = 1.51; Al 2745 / 1817 = 1.51.2
Be and Mg are group 2: removing a third electron breaks the core; B and Al lose three valence electrons so the ratio stays near 1.5.1
The largest ratio is for Be, about 8.45.1
Total: 4 marks4

Answer: Be, ratio 8.45

Fast method: Group 2 has the biggest IE3/IE2 jump, and the smaller atom (Be) has the bigger ratio.

Sanity check: A core jump gives a ratio of several times; a ratio near 1.5 corresponds to ordinary removal of valence electrons, consistent with the table.

Example 6 (hard, multi-step)

First electron gain enthalpies of group 17 (kJ per mol): F -328, Cl -349, Br -325, I -295. How many of these four elements release less energy per mole than fluorine, and which element releases the most?

Marks-style solution of example 6
StepMarks
Compare magnitudes with fluorine (328 kJ per mol): Cl 349 is larger; Br 325 is smaller; I 295 is smaller.2
Two elements (Br and I) release less energy than fluorine.1
The largest magnitude is 349 kJ per mol, so chlorine releases the most, not fluorine.2
Total: 5 marks5

Answer: 2 (Br and I); chlorine releases the most

Fast method: Remember the order Cl > F > Br > I by magnitude; two elements lie below F.

Sanity check: The values lie within 295 to 349 kJ per mol, and only F breaks the fall down the group (Cl > Br > I), because the small, crowded 2p subshell of F repels the incoming electron.

Typical trap: Putting fluorine at the top because it is the most electronegative element and a smaller atom; the 2p repulsion makes its electron gain enthalpy less negative than that of chlorine.

Formulas and units

Formula and unit box for Periodic trends: radii, ionisation enthalpy, electron gain enthalpy, valence and oxidation states
ResultFormulaValid whenUnits or noteWorked example
Effective nuclear chargeZeff = Z - shieldingmulti-electron atoms or ions; shielding from Slater rules or an estimatedimensionlessnone
Isoelectronic electron countelectrons = Z - chargemonatomic atoms and ions; charge signed (+ cation, - anion)numberExample 1
Radius order in isoelectronic setradius decreases as Z increasesisoelectronic species (same number of electrons) onlypmExample 1
Ionisation enthalpy dips (period 2 and 3)Be > B, N > O, Mg > Alfirst ionisation enthalpy only, for these pairs in periods 2 and 3kJ per molExample 4
Jump in successive IEIE(n+1) / IE(n) is large after the valence electronssuccessive ionisation enthalpies of one atom; jump follows the valence electronsdimensionlessExample 2
Overall electron gain enthalpysum of consecutive stepsgaseous atom gaining electrons one at a time; add the signed stepskJ per molExample 3
Halogen electron gain orderCl > F > Br > I (magnitude)first electron gain enthalpy of gaseous halogen atomskJ per molExample 6
Oxidation states of non-metalsmax = valence electrons, min = max - 8p-block non-metals of groups 14 to 17 except F and O; not for metalsintegernone

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Writing the ionisation enthalpy order of B and Be, or N and O, by nuclear charge alone. Why it tempts: Zeff rises across the period, so the exceptions seem wrong unless subshell stability is remembered.
  • Putting F before Cl in electron gain enthalpy order (more negative). Why it tempts: Fluorine is the most electronegative element and is assumed to have the most negative value.
  • Comparing ionic radii without counting electrons first. Why it tempts: Ions look like a series (Na+, Mg2+) but K+ and Cl- belong to a different isoelectronic group.
  • Treating a noble gas radius as comparable with covalent radii. Why it tempts: It appears in the same periodic table row, but it is a van der Waals radius and is larger.
  • Using a positive sign convention for electron gain enthalpy and reversing the order. Why it tempts: Some books tabulate the electron affinity as a positive number for energy released.
  • Giving the maximum oxidation state of a transition element as the group valence electron count for all of them. Why it tempts: The rule works for Mn (+7) but breaks for the later members, where the highest state is lower.

Time per question and fast method

Target: about 75 seconds per question.

Write the data in a line and mark the dips: B after Be, O after N, Al after Mg (IE); Cl before F (EGE). For isoelectronic radius sort by Z (high Z, small ion). For group from IE data, find the biggest ratio. For oxidation states, use group valence electrons (max) and that minus 8 (min).

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. The highest and lowest oxidation states of sulphur (group 16) are
Show the answer

Answer: A: +6 and -2. Maximum = 6 valence electrons = +6; minimum = 6 - 8 = -2.

Question 2. Which ion has the smallest radius: K+, Ca2+, Cl-, S2-?
Show the answer

Answer: B: Ca2+. All have 18 electrons; Ca2+ has the largest nuclear charge (Z = 20), so it is the smallest.

Question 3. Given first ionisation enthalpies (kJ per mol) K 419, Na 496, Al 578, Mg 738, the highest value is for
Show the answer

Answer: D: Mg. The largest number among the data is 738, for Mg (filled 3s subshell).

Question 4. Which statement is correct?
Show the answer

Answer: B: Chlorine has a more negative electron gain enthalpy than fluorine. Cl is -349 kJ per mol against F -328; the small 2p subshell of F raises repulsion.

Question 5. The number of electrons in Fe3+ (Z = 26) is
Show the answer

Answer: C: 23. Electrons = Z - charge = 26 - 3 = 23.

Question 6. Which has the larger radius, Fe2+ or Fe3+?
Show the answer

Answer: A: Fe2+. Fe2+ has one more electron for the same nucleus, so it is larger.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Atomic radii: types and trends

Covalent radius is half the distance between nuclei of two bonded identical atoms; metallic radius is half the distance between neighbouring ions in a metal; van der Waals radius is half the distance between nuclei of two non-bonded atoms and is the largest of the three for an element. Across a period the radius falls, but across the transition series it falls slowly and then flattens because inner d electrons shield. Lanthanoid contraction (poor shielding by 4f electrons) makes the 5d elements almost the same size as the 4d elements, so Zr and Hf have nearly equal radii.

Ionic radii and isoelectronic series

A cation is smaller than its parent atom and the more positive the charge on the same element, the smaller the ion: Fe3+ < Fe2+ < Fe. An anion is larger than its atom. Isoelectronic species have the same number of electrons (Z minus charge), so the radius depends on nuclear charge alone: the larger Z, the smaller the radius. To compare ions from different periods, count electrons first: K+ and Cl- (18 electrons) are isoelectronic, Na+ is not.

Ionisation enthalpy: factors and exceptions

Ionisation enthalpy increases with nuclear charge, and decreases with larger radius, greater shielding and greater penetration of the outer electron. Across period 2 the order is Li < B < Be < C < O < N < F < Ne: B is below Be, and O is below N. Down group 13 the trend is irregular (Ga is slightly above Al, and Tl is above In) and group 14 shows the same irregularity (Pb is above Sn), because of poor shielding by d and f electrons (lanthanoid contraction for Tl and Pb); the s-block and most other groups fall smoothly. Successive ionisation enthalpies rise because the same nuclear charge holds fewer electrons; the ratio IE(n+1)/IE(n) shows a sudden large jump at the first core electron (about 5 to 8 times in the data on this page), which identifies the group.

Electron gain enthalpy and the sign convention

Use the convention in which a negative value means energy is released. Approximate first values (kJ per mol): F -328, Cl -349, Br -325, I -295, O -141, S -200. Thus the order of magnitude is Cl > F > Br > I and S > O. The element with the most negative value in the table is chlorine. The value for Be, N and the noble gases is positive or close to zero (Ne is positive). A second gain is always positive because the electron is added to an anion; O2- is stable in solids only because of the large lattice enthalpy.

Valence, oxidation states and reactivity

Valence is the combining capacity: it equals the number of outer electrons for s-block elements and for the first half of the p-block, and 8 minus that number for the later non-metals. A non-metal of group 15 to 17 has maximum oxidation state equal to its valence electrons (+5, +6, +7) and minimum 8 less (-3, -2, -1); fluorine is the exception and shows only -1, and oxygen shows positive states only with fluorine. Variable oxidation states in transition elements arise from the close energy of (n-1)d and ns electrons. Reactivity: alkali metals are more reactive down the group; halogens are less reactive down the group.

What examiners test

Expect: ordering of species by radius with an isoelectronic twist; the ionisation enthalpy order of several period-2 or period-3 elements with the two or three exceptions; identification of the element from successive ionisation enthalpies; the sign and size of electron gain enthalpy (Cl against F, S against O, noble gases); highest and lowest oxidation states; and statements to be marked true or false. When data are given in the question, use only the data, not memory.

Memory hook

Suppose a teacher stands at the centre of a classroom with students sitting in rows around her, and every extra assistant who joins her adds one more unit of pull on all students.

  1. Students in the front rows (inner electrons) block the teacher's voice from the back rows, so a student in the back row feels less of her pull: shielding reduces the effective pull.
  2. If assistants join but new students sit in the same row, the whole row is pulled in: the radius shrinks across a period.
  3. If a new back row is added, the farthest student is easy to call out of the room (low ionisation enthalpy) and hard to attract extra students (low electron gain).

Effective nuclear charge acts as the pull of the teacher; rows are shells; shielding is the front rows; periodic trends are the changes in pull across a row and down a column.

More pull, same row: smaller radius, higher ionisation enthalpy; new row: the reverse.

Revision card

Try to answer each without looking above.

  1. State the trend of atomic radius across a period and down a group, and give the reason using effective nuclear charge.
  2. Write the order of radii for N3-, O2-, F-, Na+, Mg2+ and Al3+ and explain it.
  3. List the three standard dips in first ionisation enthalpy and the reason for each.
  4. Why is the electron gain enthalpy of chlorine more negative than that of fluorine?
  5. How do you find the number of valence electrons from successive ionisation enthalpies?
  6. State the maximum and minimum oxidation states of a group 16 non-metal.

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 5; fixed: 5
  • Report: content/reviews/learn8-per-2026-11-21.md

Textbook references

  • NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 3: Classification of Elements and Periodicity in Properties, 3.7.1 Trends in Physical Properties (read 2026-11-22)
  • NCERT Chemistry Part 1, Class 11 (reprint 2026-27), Unit 3: Classification of Elements and Periodicity in Properties, 3.7.2 Periodic Trends in Chemical Properties (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 9, text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
  • NCERT Class 11 Chemistry, Classification of Elements and Periodicity in Properties chapter: named as the scope reference only; not opened for this draft, so textbook section references are pending. Data values quoted in examples are given in the problems themselves. Content written fresh.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.