EngineeringRise

Group 13 and 14 Trends, Boron and Carbon: JEE Main

Reviewed Last updated 2026-11-20. Syllabus topic: Group 13 and 14 trends and unique behaviour.

In short. Group 13 is ns2 np1 and group 14 is ns2 np2. Down a group metallic character, size and stability of the lower oxidation state rise; oxides turn acidic to basic. Boron and carbon, the first members, are small, non-metallic, limited to covalency 4, and carbon catenates strongly.

  • Valence configuration: group 13 ns2 np1; group 14 ns2 np2. Maximum common oxidation state is group number minus 10.
  • Ionisation enthalpy does not fall smoothly in group 13: Ga and Tl are higher than the element above because d and f electrons shield poorly.
  • Inert pair effect: the lower state (+1 for group 13, +2 for group 14) becomes more stable down the group: Tl(I), Pb(II).
  • Oxides: B2O3 acidic, Al2O3 and Ga2O3 amphoteric, In2O3 and Tl2O3 basic; CO2 and SiO2 acidic, SnO2 and PbO2 amphoteric.
  • Unique behaviour: boron and carbon have no vacant d orbital, so covalency is limited to 4; carbon shows very strong catenation (C-C 348 kJ mol⁻1).

Syllabus line: p- BLOCK ELEMENTS Group -13 to Group 18 Elements General Introduction: Electronic configuration and general trends in physical and chemical properties of elements across the periods and down the groups, unique behaviour of the first element in each group. (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 10 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

  • Classification of elements and periodicity (lesson planned): Atomic size, ionisation enthalpy and electron gain enthalpy trends across a period and down a group are used in every comparison here. Read this first if those trends are shaky.
  • Atomic structure (lesson planned): Electronic configurations (ns2 np1 to np6, half-filled and filled subshells, d and f electrons inside the valence shell) decide almost every trend. Read this first if filling order is shaky.
  • Chemical bonding and molecular structure (lesson planned): Covalency, bond enthalpy and pi bonding are used to explain the first-element anomalies. Read this first if bond enthalpy is shaky.

Related topics

  • Group 15 and 16 trends and unique behaviour
  • p-Block Elements (lesson planned)
  • Classification of Elements and Periodicity (lesson planned)
  • Chemical Bonding and Molecular Structure (lesson planned)
  • Atomic Structure (lesson planned)

The concept step by step

  1. Step 1: Where the elements sit and what their configurations are

    Group 13 (B, Al, Ga, In, Tl) has the outer configuration ns2 np1 and group 14 (C, Si, Ge, Sn, Pb) has ns2 np2. The group number minus 10 gives the number of valence electrons: 3 and 4. Below the first two members the valence shell sits on top of a d subshell (Ga, Ge) and, in the sixth period, on d and f subshells (Tl, Pb). This layer of inner electrons is the root of most irregularities.

  2. Step 2: Size, ionisation enthalpy and metallic character

    Atomic size rises down a group because a new shell is added, so one expects ionisation enthalpy to fall. In group 13 it falls from B (801) to Al (577), but then rises slightly to Ga (579), falls to In (558) and rises to Tl (589). The d electrons of Ga and the 4f and 5d electrons of Tl screen the nuclear charge poorly. Metallic character still rises: B and C are non-metals, Si and Ge are metalloids, the others are metals.

  3. Step 3: Oxidation states and the inert pair effect

    The group oxidation state is +3 for group 13 and +4 for group 14, but the state two lower, +1 and +2, becomes more stable down the group. The ns2 pair is held more tightly than expected because of poor shielding by d and f electrons, and the energy released by forming extra bonds no longer pays for using it. So Tl(I) and Pb(II) are the stable states, while Tl(III) and Pb(IV) are strong oxidising agents (positive E0).

  4. Step 4: Trends in the nature of oxides and hydroxides

    Oxides become more basic down a group as metallic character rises. In group 13: B2O3 is acidic, Al2O3 and Ga2O3 are amphoteric, In2O3 and Tl2O3 are basic. In group 14: CO2 and SiO2 are acidic, GeO2 is weakly acidic, SnO2 and PbO2 are amphoteric. Within one element, the higher oxidation state gives the more acidic oxide (SnO2 more acidic than SnO). These are the standard orderings examiners reuse.

  5. Step 5: Unique behaviour of boron

    Boron is small, has a high ionisation enthalpy and forms only covalent compounds. Because the second shell has only 2s and 2p orbitals, its maximum covalency is 4 ([BF4]-); [BF6]3- does not exist, but [AlF6]3- does because Al has 3d orbitals. Boron trihalides are electron-deficient Lewis acids; the acid strength order BF3 < BCl3 < BBr3 is explained by pi back-donation from the fluorine lone pair into the empty 2p orbital of boron, which is most effective for F.

  6. Step 6: Unique behaviour of carbon

    Carbon is small and forms strong multiple bonds with itself and with N and O; its C-C bond (348 kJ mol⁻1) is much stronger than Si-Si (297), so catenation falls C > Si > Ge > Sn. Having no d orbitals, carbon cannot expand its octet: CCl4 is not hydrolysed, while SiCl4 is, using 3d orbitals to accept water. The maximum covalency of C is 4. Si-O (452) is much stronger than Si-Si (297), which is why silicon prefers Si-O-Si chains to Si-Si chains.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

The first ionisation enthalpies (kJ mol⁻1) of C, Si, Ge, Sn and Pb are 1086, 786, 762, 709 and 716. In how many of the four steps going down the group does the value rise?

Marks-style solution of example 1
StepMarks
Compare each element with the one above it: Si Sn 709 rises.2
Only one step rises, at Sn to Pb: 1 step. The 4f and 5d electrons shield the 6p electron poorly, so the nuclear pull is higher than expected.1
Total: 3 marks3

Answer: 1 step

Fast method: Look for the one place where a block of d and f electrons has just been filled: Sn to Pb.

Sanity check: A fall down a group is the rule (outer electron farther out); a rise needs an extra reason, here poor f shielding, so a count of 1 or 2 is reasonable for this data.

Example 2 (easy)

The outer configuration of thallium is 6s2 6p1 with a filled 4f14 5d10 core. How many electrons in poorly shielding d and f subshells lie inside the valence shell of Tl?

Marks-style solution of example 2
StepMarks
Add the f electrons: 4f14 gives 14.1
Add the d electrons: 5d10 gives 10 (these lie just below the 6s and 6p electrons).1
Total = 14 + 10 = 24 electrons of poor shielding, which raises the effective nuclear charge on the 6s electrons and gives the inert pair effect.1
Total: 3 marks3

Answer: 24 electrons

Fast method: Take the f14 and d10 written in the configuration: 14 + 10.

Sanity check: A count of 24 is large against the single p electron, which is why Tl+ (loss of only the 6p electron) is stable.

Example 3 (medium)

Bond enthalpies (kJ mol⁻1): C-C 348, C-O 358, Si-Si 297, Si-O 452. Find the ratio (E-O)/(E-E) for Si and compare it with the ratio for C. What does the comparison suggest about the stability of Si-Si chains in the presence of oxygen-containing species?

Marks-style solution of example 3
StepMarks
Ratio for Si = 452 / 297 = 1.52.1
Ratio for C = 358 / 348 = 1.03.1
For Si the Si-O bond is about 1.5 times as strong as Si-Si, so Si-O-Si links are strongly preferred to Si-Si links. This is a single-bond comparison only; it does not say that C-C chains are stable towards oxygen.1
Si-Si chains are unstable towards oxygen-containing species because Si-O is much stronger than Si-Si (ratio 1.52); the C ratio of 1.03 is only a single-bond comparison and is not a measure of overall stability.1
Total: 4 marks4

Answer: Si ratio 1.52 against C ratio 1.03

Fast method: Divide: 452/297 is about 1.5; 358/348 is about 1.0.

Sanity check: A ratio above 1 means the product bond is stronger; 1.5 is a large margin, 1.03 is nearly neutral.

Example 4 (medium)

Boron (period 2) can use only 2s and 2p orbitals, while aluminium (period 3) also has vacant 3d orbitals. Taking the valence orbitals available as four for period 2 and (four + two usable d orbitals) for period 3, find the difference between the maximum covalencies of Al and B.

Marks-style solution of example 4
StepMarks
Maximum covalency of B = number of valence orbitals = 1 (2s) + 3 (2p) = 4.1
Maximum covalency of Al = 4 + 2 (3d) = 6, as in [AlF6]3-.1
Difference = 6 - 4 = 2.1
Total: 3 marks3

Answer: 2

Fast method: B stops at 4 (BF4-); Al reaches 6 (AlF6 3-): difference 2.

Sanity check: [BF4]- and [AlF6]3- are the familiar ions with 4 and 6 ligands, consistent with 4 and 6.

Example 5 (hard, multi-step)

For the changes Tl3+ + 2e- giving Tl+ (E0 = +1.25 V) and PbO2 + 4H+ + 2e- giving Pb2+ + 2H2O (E0 = +1.46 V), find the free energy change per mole for each (F = 96485 C mol⁻1) and the difference in magnitude, in kJ mol⁻1, and say what the signs say about the inert pair effect.

Marks-style solution of example 5
StepMarks
Both are two-electron changes, n = 2. Gibbs energy change = -nFE0.1
Tl: -2 x 96485 x 1.25 = -241 212 J = -241.2 kJ mol⁻1.2
Pb: -2 x 96485 x 1.46 = -281 736 J = -281.7 kJ mol⁻1.1
Both are negative, so reduction to the lower state is favourable: Tl(I) and Pb(II) are the stable states, the inert pair effect. Difference in magnitude = 281.7 - 241.2 = 40.5 kJ mol⁻1.1
Total: 5 marks5

Answer: Tl: -241.2, Pb: -281.7, difference 40.5 kJ mol⁻1

Fast method: Difference = 2 x 96485 x (1.46 - 1.25) / 1000 = 2 x 96.485 x 0.21 = 40.5 kJ.

Sanity check: Magnitudes of a few hundred kJ mol⁻1 are normal for strong oxidants; the sign shows Tl3+ and Pb(IV) are oxidising, the opposite of what the group number suggests.

Typical trap: Using n = 3 for Tl3+ to Tl+ (it is a two-electron change), or forgetting the minus sign and calling the change unfavourable.

Example 6 (medium)

In the sequence B2O3, Al2O3, Ga2O3, In2O3, Tl2O3 the nature is acidic, amphoteric, amphoteric, basic, basic. Counting B2O3 as position 1, at which position does the oxide first become basic?

Marks-style solution of example 6
StepMarks
Write the sequence with positions: 1 acidic, 2 amphoteric, 3 amphoteric, 4 basic, 5 basic.1
The first entry with the nature basic is position 4 (In2O3).1
Position 4: metallic character has overtaken amphoterism by the fourth member.1
Total: 3 marks3

Answer: position 4 (In2O3)

Fast method: Acidic, then two amphoteric, so the fourth is the first basic one.

Sanity check: Metallic character rises down a group, so acidic, amphoteric, basic is the only possible order.

Formulas and units

Formula and unit box for Group 13 and 14 trends and unique behaviour
ResultFormulaValid whenUnits or noteWorked example
Valence electronsgroup 13: ns2 np1; group 14: ns2 np2neutral ground-state main-group atoms, groups 13 to 18number = group - 10none
IE1 group 13 (kJ mol⁻1)B 801, Al 577, Ga 579, In 558, Tl 589not applicablekJ mol⁻1none
Catenation (E-E, kJ mol⁻1)C 348 > Si 297 > Ge 260 > Sn 240not applicablekJ mol⁻1Example 3
Oxides of group 13B2O3 acidic; Al2O3, Ga2O3 amphoteric; In2O3, Tl2O3 basicnot applicablen/a (qualitative)Example 6
Oxides of group 14CO2, SiO2 acidic; SnO2, PbO2 amphotericnot applicablen/a (qualitative)none
Inert pair potentialsTl3+ to Tl+: +1.25 V; PbO2 to Pb2+: +1.46 Vstandard conditions (298 K, 1 M, acidic solution), aqueous couplesVExample 5
Gibbs energy of a redox stepdG = -nFE0, F = 96485standard state; n = electrons transferred; E0 in volts, F in C per moleJ mol⁻1Example 5
Lewis acidity of boron halidesBF3 < BCl3 < BBr3not applicablen/a (qualitative)none
Maximum covalencyperiod 2: 4; period 3 and below: up to 6ligand count limited by available valence orbitals of the central atomnumber of ligandsExample 4

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Saying ionisation enthalpy falls smoothly down group 13. Why it tempts: The textbook rule says size increases so IE falls; the Ga and Tl increases are forgotten.
  • Taking Tl(III) as the stable state of thallium because the group number is 13. Why it tempts: Group oxidation state is learnt as the default; the inert pair effect reverses it from Tl and Pb downwards.
  • Calling Al2O3 acidic or basic only. Why it tempts: Al is a metal so basic seems natural; its oxide dissolves in both acid and alkali and is amphoteric.
  • Giving covalency 6 for boron because [AlF6]3- exists. Why it tempts: Boron and aluminium share a group; the missing d orbitals of period 2 are forgotten.
  • Claiming carbon is hydrolysed like silicon. Why it tempts: CCl4 and SiCl4 look alike; carbon has no vacant d orbital to accept a lone pair, so CCl4 is inert to water.
  • Using E-E bond strength as the order Si > C because silicon is bigger. Why it tempts: Bigger atoms look as if they should form stronger, more polarisable bonds; but overlap is poorer, so C-C (348) is higher than Si-Si (297).

Time per question and fast method

Target: about 75 seconds per question.

For a trend question, write the data as a row and mark every place where it rises when the rule says it falls; the marked places are where d or f electrons were added. For oxide questions, place the element in acidic, amphoteric, basic order down the group and count the middle ones.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. Which group 13 element has a first ionisation enthalpy higher than the element above it?
Show the answer

Answer: B: Ga. Ga (579) is above Al (577) because the 3d electrons shield poorly; In is lower than Ga; Tl (589) is also above In.

Question 2. Which oxide is amphoteric?
Show the answer

Answer: C: Al2O3. B2O3 and CO2 are acidic, Tl2O3 is basic, Al2O3 is amphoteric.

Question 3. Maximum covalency of boron is limited to 4 because
Show the answer

Answer: A: it has no vacant d orbital in the second shell. Period 2 has only 2s and 2p orbitals: four in all.

Question 4. The Gibbs energy change (kJ mol⁻1) for Tl3+ + 2e- giving Tl+ with E0 = +1.25 V is nearest to
Show the answer

Answer: A: -241. -nFE0 = -2 x 96485 x 1.25 / 1000 = -241 kJ mol⁻1.

Question 5. Which of the following is the correct order of catenation in group 14 (E-E in kJ mol⁻1 C 348, Si 297, Ge 260, Sn 240)?
Show the answer

Answer: A: C > Si > Ge > Sn. Catenation follows E-E bond strength, which falls down the group.

Question 6. Why is CCl4 not hydrolysed by water while SiCl4 is?
Show the answer

Answer: A: C has no vacant d orbital to accept water. Silicon can accept the lone pair of water into a 3d orbital; carbon in period 2 cannot expand its shell.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

The d-block and lanthanoid contraction effect on sizes

The covalent radius rises sharply from B to Al, but only a little from Al to Ga and from In to Tl: the 3d and 4f subshells added in between do not shield the nuclear charge well, so the outer shell is pulled in. This is why Ga is nearly the same size as Al, and why its ionisation enthalpy is slightly higher. Questions often give the numbers and ask for the explanation, so quote d and f shielding, not just size.

Electronegativity and metallic character trends

Electronegativity falls from B to Al but then rises slightly to Ga for the same screening reason, and does not fall regularly afterwards. Metallic character still increases down the group in a qualitative sense, and the acid-base nature of the oxides tracks it. For exam use, quote electronegativity values only when the stem gives them, and treat statements of the form 'rises regularly down the group' with suspicion, because they are almost always the incorrect option.

Inert pair effect: how to apply it

Use the effect to compare stability of oxidation states: Tl+ > Tl3+, Pb2+ > Pb4+, Sn2+ is reducing (Sn4+ more stable than Sn2+ but Sn2+ is a mild reducing agent), Ge2+ less stable than Ge4+. The consequences are physical as well as redox: Pb(IV) compounds such as PbO2 are strong oxidising agents, and Pb(II) compounds are largely ionic while Pb(IV) compounds are covalent. The standard potentials for Tl3+ to Tl+ (+1.25 V) and PbO2 to Pb2+ (+1.46 V) are positive, which is how the effect is measured.

Anomalous behaviour of the first element: the common reason list

Examiners ask why boron differs from aluminium and carbon from silicon. Give the same four reasons: small size, high ionisation enthalpy and electronegativity, absence of vacant d orbitals in the valence shell (so covalency is limited to 4 and no hydrolysis of CCl4), and, for carbon, the ability to form pp-pp multiple bonds and long stable chains. Each reason maps onto a standard consequence; do not mix them (the lack of d orbitals does not explain catenation).

Allotropes of carbon: what is tested

Diamond has every carbon sp3 bonded to four others (hard, insulator). Graphite has sp2 carbon in layers, with one electron per carbon delocalised over the layer, so it is soft and conducts along the layers; the layers are held by weak van der Waals forces. Fullerenes are molecular carbon cages. Only these general ideas are needed under the syllabus line; compound structures and preparations are outside it.

Memory hook

Suppose a long train of coaches is being pulled and the coupling between two coaches must be strong enough to hold the whole string together.

  1. A short, tight coupling (a small atom with strong overlap, carbon) holds a long train together, so the chain of coaches can grow long: catenation.
  2. A longer, looser coupling (a large atom like tin) pulls apart under the same load, so long chains do not survive.
  3. A coach that has only four coupling points (a period 2 atom with no d orbitals) can never be joined to more than four others, however much a driver wants to add; this is the limit of boron and carbon.

Small atoms make short strong bonds and long chains, but their valence shell offers only four orbitals, which limits covalency to 4.

Small and strong: long chains but only four joints.

Revision card

Try to answer each without looking above.

  1. State the outer configurations of groups 13 and 14 and the number of valence electrons.
  2. Why does Ga have a higher first ionisation enthalpy than Al?
  3. State the inert pair effect and give one example from each of groups 13 and 14.
  4. Give the acidic, amphoteric and basic oxides in group 13.
  5. Why is the maximum covalency of boron 4 while that of aluminium can be 6?
  6. Arrange C, Si, Ge and Sn in order of catenation and give the reason.

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 2; fixed: 2
  • Report: content/reviews/learn5-pbl-2026-11-20.md

Textbook section references are not attached to this lesson yet.

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 10 (p-Block Elements), text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
  • NCERT Class 11 Chemistry (p-Block Elements, Classification of Elements) and Class 12 Chemistry (p-Block Elements): named as the scope reference only; not opened for this draft, so textbook section references are pending. Content written fresh.
  • Data values (ionisation enthalpies, electron gain enthalpies, bond enthalpies, boiling points, standard potentials, pKa) are standard textbook-table values given in each question or example; they were not opened from a document in this draft and must be confirmed against the textbook tables before any Verified label.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.