EngineeringRise

Two ideal diodes D1 and D2 are used as follows. D1 is in series with a 1.0 kilo-ohm resistor and a 10 V battery, D2 is in series with a 1.0 kilo-ohm resistor and a 6.0 V battery, and both diodes are forward oriented towards a common node X. A 2.0 kilo-ohm load joins X to earth. The potential of X, in volt, is

Answer: (D) 6.67 V Status: Verified (T1). Checked by code and independent solves on 2026-11-20.

  1. 4.00 V
  2. 6.40 V
  3. 10.0 V
  4. 6.67 V

Solution

  1. Test the case in which only D1 conducts: V_X = 10 x 2/(1 + 2) = 6.67 V.
  2. D2 has its anode at 6.0 V and its cathode side at X = 6.67 V, so D2 is reverse biased; the assumption is consistent.
  3. Check the case in which both conduct: V_X = (10 + 6)/(1 + 1 + 0.5) = 6.4 V, but then D2 would carry a negative current, which is impossible. So V_X = 6.67 V.

Fast method

The larger battery wins: treat only D1 as on, divide 10 V in the ratio 1 : 2 to get 6.67 V, then confirm that 6.67 V exceeds 6 V so D2 is off.

Expected time: about 120 seconds. Difficulty: hard.

Topic page: Semiconductors, p-n junction diode and rectifier

Test your answers now

Report an error

Think the question, answer or a step is wrong? One tap tells us. We check it and publish the correction.