EngineeringRise

A diode conducts only while the voltage across it exceeds a threshold of 1.0 V; during conduction it has a constant drop of 1.0 V and zero resistance, and in the other half it conducts nothing. It is connected in series with a resistor to a sinusoidal source of amplitude 2.0 V (half-wave rectifier circuit). The angle, in degrees, over which the diode conducts in each cycle is ___.

Answer: 120 Status: Verified (T3). Checked by code and independent solves on 2026-11-20.

Solution

  1. Conduction starts when 2.0 sin(theta) = 1.0, so sin(theta) = 0.5 and theta = 30 degrees.
  2. It stops when theta = 180 - 30 = 150 degrees, because the source falls below 1.0 V again.
  3. Conduction angle = 150 - 30 = 120 degrees (one third of the cycle).

Fast method

sin(theta0) = Vd/Vp = 1/2 gives 30 degrees; conduction angle = 180 - 2 x 30 = 120.

Expected time: about 80 seconds. Difficulty: medium.

Topic page: Semiconductors, p-n junction diode and rectifier

Test your answers now

Report an error

Think the question, answer or a step is wrong? One tap tells us. We check it and publish the correction.