EngineeringRise

First Law, Isothermal and Adiabatic Processes: JEE Main

Reviewed Last updated 2026-11-20. Syllabus topic: First law, isothermal and adiabatic processes.

In short. First law: Q = dU + W, with W the work done by the gas. Isothermal ideal gas: dU = 0, so Q = W = n R T ln(V2/V1). Adiabatic: Q = 0, so W = -dU, and P V^gamma is constant with gamma = Cp/Cv.

  • First law Q = dU + W (W is work done by the gas); it is energy conservation for the system, valid for any process.
  • Isothermal (ideal gas): T constant, dU = 0, P V constant, Q = W = n R T ln(V2/V1) = n R T ln(P1/P2).
  • Adiabatic (reversible, ideal gas): Q = 0, P V^gamma, T V^(gamma - 1) and T^gamma P^(1 - gamma) are constants; W = n R (T1 - T2)/(gamma - 1) = n Cv (T1 - T2).
  • Isochoric: W = 0, Q = n Cv dT. Isobaric: W = P dV = n R dT, Q = n Cp dT, with Cp - Cv = R.
  • On a P-V diagram the adiabat is steeper than the isotherm through the same point: slope of the adiabat is gamma times the slope of the isotherm.
  • For P Vˣ = constant (polytropic), W = n R dT/(1 - x) and the molar heat capacity is C = Cv + R/(1 - x).

Syllabus line: Thermodynamics Thermal equilibrium and the concept of temperature, zeroth law of thermodynamics, heat, work and internal energy. The first law of thermodynamics, isothermal and adiabatic processes. The second law of thermodynamics: reversible and irreversible processes. (NTA JEE (Main) 2026 syllabus, Physics, Unit 8 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

Related topics

The concept step by step

  1. The first law: energy conservation for a gas

    Heat Q absorbed by a system goes partly into raising its internal energy and partly into work done by it: Q = dU + W. Here W is the work done by the gas, so W is positive on expansion. If the books or the question use W for work done on the gas the equation becomes dU = Q + W, so always read the sign convention first. The law holds for every process, reversible or not, as long as dU, Q and W refer to the same system.

  2. Four basic processes of an ideal gas

    Isochoric (V constant): W = 0, so Q = dU = n Cv dT. Isobaric (P constant): W = P dV = n R dT, so Q = n Cv dT + n R dT = n Cp dT, which gives Cp - Cv = R. Isothermal (T constant): dU = 0, so Q = W. Adiabatic (no heat exchange): Q = 0, so W = -dU and the gas cools when it expands. Knowing what each process fixes, you can fill the table of Q, W and dU in a few seconds.

  3. Isothermal process

    At constant temperature P V = n R T is constant, so P = n R T/V and W = integral of P dV = n R T ln(V2/V1). Since dU = 0, the gas absorbs heat equal to the work on expansion, and rejects heat equal to the work done on it on compression. Because P V is constant, ln(V2/V1) = ln(P1/P2). The graph is a rectangular hyperbola. Slow contact with a large reservoir is how it is realised.

  4. Adiabatic process and gamma

    With Q = 0 and dU = n Cv dT, the gas obeys P V^gamma = constant, where gamma = Cp/Cv. Substituting P = n R T/V gives T V^(gamma - 1) = constant. The work done is W = (P1 V1 - P2 V2)/(gamma - 1) = n R (T1 - T2)/(gamma - 1) = n Cv (T1 - T2). For a monatomic gas gamma = 5/3 and for a rigid diatomic gas gamma = 7/5. The temperature falls on adiabatic expansion and rises on compression; this is why a quickly pumped bicycle tyre warms.

  5. Comparing isothermal and adiabatic curves

    Differentiating P V = constant gives slope dP/dV = -P/V for an isotherm; differentiating P V^gamma = constant gives dP/dV = -gamma P/V for an adiabat. At the same point the adiabat is steeper by a factor gamma. Between the same initial volume and a larger final volume the adiabat ends at a lower pressure, so the work done in the adiabatic expansion is less than in the isothermal one, because less area lies under the steeper curve.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

An ideal gas at 4.0 atm and 2.0 litre expands isothermally to 8.0 litre. Find the final pressure in atm.

Marks-style solution of example 1
StepMarks
Isothermal: P1 V1 = P2 V2.1
P2 = 4.0 x 2.0/8.0.1
P2 = 1.0 atm.1
Total: 3 marks3

Answer: 1.0 atm

Fast method: Volume is multiplied by 4, so pressure is divided by 4: 4.0/4 = 1.0 atm.

Sanity check: Units: atm. Pressure falls as volume rises, as for a hyperbola, and the product P V = 8.0 litre atm is unchanged. The unit conversion is not needed because only a ratio is used.

Example 2 (easy)

A gas absorbs 500 J of heat and does 200 J of work on its surroundings. Find the change of internal energy in joule.

Marks-style solution of example 2
StepMarks
First law: Q = dU + W with W by the gas.1
dU = Q - W = 500 - 200.1
dU = 300 J (an increase).1
Total: 3 marks3

Answer: 300 J increase

Fast method: Heat in minus work out: 500 - 200 = 300 J.

Sanity check: Units: J. Energy balance: 500 J in equals 300 J stored plus 200 J delivered. If the 200 J were work done on the gas the result would be 700 J, so the sign convention matters.

Example 3 (medium)

A diatomic ideal gas (gamma = 1.4) at 1.0 atm is compressed reversibly and adiabatically to half its volume. Find the final pressure in atm.

Marks-style solution of example 3
StepMarks
Adiabatic: P V^gamma is constant, so P2 = P1 (V1/V2)^gamma.1
V1/V2 = 2, so P2 = 1.0 x 2¹.4.1
2¹.4 = 2.639, so P2 = 2.64 atm.1
Total: 3 marks3

Answer: about 2.64 atm

Fast method: 2¹.4 = 2 x 2⁰.4 = 2 x 1.32 = 2.64. An isothermal compression would give only 2.0 atm; the adiabatic result is larger because the gas also heats up.

Sanity check: Units: atm. The pressure rises above the isothermal value of 2 atm, and 2.64 is less than 2² = 4 (gamma < 2), so the size is sensible.

Example 4 (medium)

One mole of a monatomic ideal gas is heated at constant pressure from 300 K to 400 K. Take R = 8.3 J/(mol K). Find the heat absorbed, the work done by the gas and the change of internal energy, and report the heat in joule.

Marks-style solution of example 4
StepMarks
Monatomic: Cv = 1.5 R = 12.45 and Cp = 2.5 R = 20.75 J/(mol K).1
dU = n Cv dT = 12.45 x 100 = 1245 J.1
W = n R dT = 8.3 x 100 = 830 J.1
Q = dU + W = 1245 + 830 = 2075 J = n Cp dT.1
Total: 4 marks4

Answer: Q = 2075 J, W = 830 J, dU = 1245 J

Fast method: Q = (5/2) n R dT = 2.5 x 8.3 x 100 = 2075 J. Fractions: dU is 3/5 and W is 2/5 of Q.

Sanity check: Units: J. 1245 + 830 = 2075, and W/Q = 0.4 = 2/5, the standard ratio for a monatomic gas at constant pressure. Using Cv alone would give 1245 J, the tempting wrong answer.

Typical trap: Using Cv for a constant-pressure process. At constant pressure the heat also pays for the work, so Q = n Cp dT, not n Cv dT.

Example 5 (hard, multi-step)

A monatomic ideal gas at 8.0 x 10⁵ Pa and 1.0 litre expands reversibly and adiabatically to 8.0 litre. Find the work done by the gas in joule.

Marks-style solution of example 5
StepMarks
gamma = 5/3. P2 = P1 (V1/V2)^gamma = 8.0 x 10⁵ x (1/8)^(5/3).1
8^(5/3) = 32, so P2 = 8.0 x 10⁵/32 = 2.5 x 10⁴ Pa.2
P1 V1 = 800 J and P2 V2 = 2.5 x 10⁴ x 8.0 x 10⁻3 = 200 J.1
W = (P1 V1 - P2 V2)/(gamma - 1) = (800 - 200)/(2/3) = 900 J.1
Total: 5 marks5

Answer: 900 J

Fast method: (1/8)^(5/3) = 1/32, so P V falls from 800 J to 200 J; W = 1.5 x 600 = 900 J (monatomic: dU = 1.5 dPV).

Sanity check: Units: J. The work equals the drop in internal energy, 1.5 x (800 - 200) = 900 J, so the energy balance holds. The isothermal work for the same expansion would be P1 V1 ln 8 = 800 x 2.079 = 1663 J, which is larger, as the steeper adiabat predicts.

Example 6 (hard, multi-step)

One mole of a monatomic ideal gas follows the path P V² = constant and its temperature rises from 300 K to 400 K. Take R = 8.3 J/(mol K). Find the heat absorbed in joule.

Marks-style solution of example 6
StepMarks
Polytropic with x = 2: W = n R (T1 - T2)/(x - 1) = 8.3 x (300 - 400)/1 = -830 J (the gas is compressed).2
dU = 1.5 n R dT = 1.5 x 8.3 x 100 = 1245 J.1
Q = dU + W = 1245 - 830.1
Q = 415 J absorbed (molar heat capacity 0.5 R).1
Total: 5 marks5

Answer: 415 J absorbed

Fast method: C = Cv + R/(1 - x) = 1.5 R - R = 0.5 R. Then Q = 0.5 x 8.3 x 100 = 415 J.

Sanity check: Units: J. The gas is compressed but still absorbs heat, because C = 0.5 R is positive, so Q and dT have the same sign. Check against the limits: x = 1.67 (adiabatic) would give C = 0, and x = 2 is steeper than the adiabat, so C is positive.

Formulas and units

Formula and unit box for First law, isothermal and adiabatic processes
ResultFormulaValid whenUnits or noteWorked example
First lawQ = dU + W (W by the gas)any process; W is work done by the gasJExample 2
Ideal gas internal energy changedU = n Cv dT, Cv = (f/2) Rideal gas, any process; Cv=(f/2)R with no vibrational modesJExample 4
Mayer relation and gammaCp - Cv = R; gamma = Cp/Cv = 1 + 2/fideal gas; gamma=1+2/f with no vibrational modesJ/(mol K) (dimensionless)Example 4
IsothermalP V = constant; W = Q = n R T ln(V2/V1)ideal gas, reversible isothermal process; ln is natural logJExample 1
Adiabatic relationsP V^gamma = T V^(gamma - 1) = T^gamma P^(1 - gamma) = constantideal gas, reversible (quasi-static) adiabatic process, constant gamman/a (as stated)Example 3
Adiabatic workW = (P1 V1 - P2 V2)/(gamma - 1) = n Cv (T1 - T2)ideal gas, reversible adiabatic processJExample 5
IsobaricW = P dV = n R dT; Q = n Cp dTideal gas at constant pressureJExample 4
IsochoricW = 0; Q = n Cv dTideal gas at constant volumeJnone
Polytropic P Vˣ = constantW = n R (T1 - T2)/(x - 1); C = Cv + R/(1 - x)ideal gas, reversible polytropic process, x not equal to 1J (J/(mol K))Example 6
Slope on P-V plotadiabat slope = gamma x isotherm slope at the same pointideal gas; adiabat and isotherm through the same point on a P-V plotPa/m³none

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Using Cv for heat at constant pressure, or Cp for heat at constant volume. Why it tempts: dU = n Cv dT is true in every process, so Cv sticks in the mind, but at constant pressure the heat must also supply the work.
  • Writing the adiabatic law as T V^gamma = constant. Why it tempts: It looks like P V^gamma = constant; the temperature form has exponent gamma - 1.
  • Forgetting the logarithm in the isothermal work, or using log base 10. Why it tempts: The adiabatic and isobaric formulas are algebraic, so n R T alone feels complete; the integral of dV/V is the natural logarithm.
  • Taking dU = 0 for every process in which the final volume equals the initial volume, or for any process described as 'slow'. Why it tempts: dU = 0 holds when T is unchanged, not when V is; slowness alone does not make a process isothermal.
  • Applying P V^gamma = constant to the free expansion of a gas into vacuum because 'no heat flows'. Why it tempts: Free expansion has Q = 0, so it looks adiabatic; but the relation holds only for a reversible, quasi-static adiabatic. In free expansion W = 0 and dU = 0, so an ideal gas keeps its temperature.
  • Mixing the sign convention: using Q = dU - W with W by the gas. Why it tempts: Some textbooks define W as work done on the gas; the formula must match the definition of W.

Time per question and fast method

Target: about 100 seconds per question.

Write the first-law table (Q, dU, W) for the process in one line. Isothermal: dU = 0. Adiabatic: Q = 0, use T V^(gamma - 1) for temperature and dU = n Cv dT for work. Isobaric: Q : dU : W = Cp : Cv : R. Look for perfect powers (8^(2/3) = 4, 8^(5/3) = 32) to avoid a calculator.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. A gas absorbs 900 J of heat and its internal energy rises by 600 J. What work does the gas do?
Show the answer

Answer: A: 300 J. W = Q - dU = 900 - 600 = 300 J done by the gas.

Question 2. A gas at 6 atm and 1 litre expands isothermally to 3 litre. What is the final pressure?
Show the answer

Answer: C: 2 atm. P2 = P1 V1/V2 = 6 x 1/3 = 2 atm.

Question 3. A monatomic gas at 300 K is compressed adiabatically to one eighth of its volume. What is the final temperature?
Show the answer

Answer: D: 1200 K. T2 = T1 x 8^(2/3) = 300 x 4 = 1200 K.

Question 4. What is gamma for a rigid diatomic ideal gas?
Show the answer

Answer: B: 1.4. f = 5, so gamma = 1 + 2/5 = 1.4.

Question 5. In an isothermal expansion of an ideal gas, the heat absorbed equals
Show the answer

Answer: C: The work done by the gas. dU = 0 at constant temperature for an ideal gas, so Q = W.

Question 6. At the same point on a P-V diagram, which curve is steeper?
Show the answer

Answer: B: The adiabat. The adiabat has slope -gamma P/V, which is gamma times the isotherm slope -P/V, and gamma is greater than 1.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Sign convention and the table of processes

With W as work done by the gas: Q = dU + W. Isochoric: W = 0, Q = n Cv dT, dU = n Cv dT. Isobaric: W = n R dT, Q = n Cp dT, dU = n Cv dT. Isothermal: dU = 0, Q = W = n R T ln(V2/V1). Adiabatic: Q = 0, W = -dU = n Cv (T1 - T2). Note dU = n Cv dT in all four, because U of an ideal gas depends only on T. For an isobaric process of a monatomic gas, the fractions of Q used for dU and W are 3/5 and 2/5; for a diatomic gas 5/7 and 2/7. These ratios are used often in options.

Adiabatic relations and their derivation

From the first law with Q = 0: n Cv dT = -P dV. Using P = n R T/V gives Cv dT/T = -R dV/V, so T V^(R/Cv) is constant; and R/Cv = gamma - 1 because Cp - Cv = R. Using V = n R T/P leads to T^gamma P^(1 - gamma) = constant. Three equivalent forms: P V^gamma, T V^(gamma - 1) and T^gamma P^(1 - gamma) are constants. Use whichever form has the two variables the question gives. The relations hold for a reversible (quasi-static) adiabatic process of an ideal gas; a sudden free expansion is adiabatic, but these equations do not apply to it.

Free expansion and other edge cases

In free expansion of an ideal gas into vacuum, Q = 0 and W = 0 (no external pressure), so dU = 0 and the temperature does not change; yet it is not isothermal in the quasi-static sense and the path cannot be drawn on a P-V diagram. For an isothermal compression the gas rejects heat; sign errors are common. The slope claim holds at the same point only. For a monatomic gas P proportional to T^(5/2) in an adiabat, a useful memory form. Mixtures: Cv of the mixture is the mole-weighted average of the Cv values, and gamma = (Cv + R)/Cv. For molar heat capacity: isothermal C is infinite, adiabatic C is zero.

Polytropic processes P Vˣ = constant

For P Vˣ = constant the work between two states is W = (P1 V1 - P2 V2)/(x - 1) = n R (T1 - T2)/(x - 1), and the molar heat capacity is C = Cv + R/(1 - x). Special cases: x = 0 isobaric (C = Cp), x = 1 isothermal (C infinite), x = gamma adiabatic (C = 0), x infinite isochoric (C = Cv). For a straight line P proportional to V (x = -1), W = n R dT/2 and C = Cv + R/2. When C is negative, heat is rejected while the temperature rises (x between 1 and gamma). Examiners ask for Q along such a path using Q = dU + W.

What examiners test and time per question

Frequent items: heat absorbed in isothermal expansion; final temperature or pressure in an adiabatic change with a stated volume ratio, including ratios that are perfect powers; work from adiabatic temperature change; comparing isothermal and adiabatic work or slope; first-law table for a mixed path (isochoric then isobaric); ratio of Q and dU in isobaric heating; mixtures of gases; polytropic heat capacities; P-V cycles with a first-law table. Target 90 to 120 seconds. Check each answer for sign and for the direction of change in T: compression in an adiabat raises T.

Memory hook

Suppose a family pumps a cycle tyre with a hand pump on a quiet afternoon and the barrel of the pump becomes warm after a minute of quick strokes.

  1. Each quick stroke squeezes the air into a smaller volume before any heat can leak to the metal barrel and the outside, so the process is nearly adiabatic.
  2. The pushing hand does work on the air, and with no heat leaving, all the work becomes internal energy: the air gets hotter and so does the barrel.
  3. If the strokes are very slow, the heat leaks out through the barrel as it is made, the air stays at room temperature, and the process is nearly isothermal.

Quick strokes are adiabatic (Q = 0, work on the gas raises U), slow strokes are isothermal (U fixed, work on the gas leaves as heat).

Quick pump: work becomes warmth. Slow pump: work leaves as heat.

Revision card

Try to answer each without looking above.

  1. Write the first law and state what W means in your convention.
  2. Give Q, W and dU for isochoric, isobaric, isothermal and adiabatic processes of an ideal gas.
  3. Write the three adiabatic relations and the adiabatic work formula.
  4. Give gamma for monatomic and diatomic gases and the split of Q into dU and W at constant pressure.
  5. Compare the slopes of an adiabat and an isotherm at the same point and say what follows for the work.
  6. Write the molar heat capacity of the process P Vˣ = constant.

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 0; fixed: 0
  • Report: content/reviews/learn5-thd-2026-11-20.md

Textbook references

  • NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 11: Thermodynamics, Summary SUMMARY (read 2026-11-22)
  • NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 11: Thermodynamics, 11.8.2 Isothermal process (read 2026-11-22)
  • NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 11: Thermodynamics, 11.8.3 Adiabatic process (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 8 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
  • Standard results of school-level thermodynamics; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.