Degrees of Freedom, Equipartition and Mean Free Path
Reviewed Last updated 2026-11-20. Syllabus topic: Degrees of freedom, equipartition, specific heats and mean free path.
In short. A molecule has f active degrees of freedom: 3 for monatomic, 5 for rigid diatomic, 6 for rigid non-linear polyatomic. Equipartition gives (1/2) k T per degree, so Cv = (f/2) R, Cp = (f/2 + 1) R, gamma = 1 + 2/f. The mean free path is lambda = k T / (sqrt(2) pi d² P).
- Monatomic f = 3, rigid diatomic f = 5, rigid linear triatomic f = 5, rigid non-linear polyatomic f = 6; active vibration adds 2 per vibrational mode.
- Equipartition: mean energy (1/2) k T per quadratic term, so internal energy of n moles is U = (f/2) n R T.
- Cv = (f/2) R, Cp = Cv + R = (f/2 + 1) R, gamma = Cp/Cv = 1 + 2/f: 1.67, 1.40 and 1.33 for f = 3, 5 and 6.
- For a mixture add n Cv for each gas: Cv(mix) = sum(n Cv)/sum(n); gamma of the mixture is not the mean of the gammas.
- Mean free path lambda = k T / (sqrt(2) pi d² P) = 1/(sqrt(2) pi d² n_v): proportional to T/P and independent of speed.
Syllabus line: Kinetic Theory of Gases Equation of state of a perfect gas, work done on compressing a gas, kinetic theory of gases: assumptions, the concept of pressure, kinetic interpretation of temperature, RMS speed of gas molecules, degrees of freedom, law of equipartition of energy and applications to specific heat capacities of gases, mean free path, Avogadro's number. (NTA JEE (Main) 2026 syllabus, Physics, Unit 9 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Equation of state, pressure and temperature in kinetic theory: Equipartition extends the result of (3/2) k T per molecule. Read this first if mean translational energy and v_rms are not clear.
- Temperature, zeroth law, heat, work and internal energy: Specific heats at constant volume and pressure need heat, work and internal energy. Read this first if Q = dU + W is not fluent.
- Rotational motion (lesson planned): Rotational degrees of freedom use moment of inertia and rotational kinetic energy. Read this first if (1/2) I omega² is unfamiliar.
Related topics
The concept step by step
What a degree of freedom is
The number of degrees of freedom f of a molecule is, for this chapter, the number of quadratic terms in its energy, that is, the number of independent ways it can store energy. (The geometric count of coordinates needed to fix position and orientation is smaller, because a vibration is one coordinate but two energy terms.) A point mass free in space has 3 (translation along x, y and z). A rigid body that can also rotate has up to 3 more. Vibrations add further modes. For counting, a degree of freedom means a quadratic term in the energy: (1/2) m v_x², (1/2) I omega² or the kinetic and potential terms of a vibration. A vibrational mode has two such terms, kinetic and potential, so it contributes 2 to f.
Counting for monatomic, diatomic and polyatomic gases
A monatomic molecule (He, Ne, Ar) behaves as a point: f = 3. A rigid diatomic molecule has 3 translational and 2 rotational (rotation about the axis joining the atoms carries negligible energy), so f = 5 at ordinary temperatures. If vibration is active at high temperature, add 2 to get f = 7. A rigid linear triatomic molecule (CO2) has f = 5 and a non-linear rigid polyatomic molecule (H2O, CH4) has 3 translational and 3 rotational, f = 6. Unless the question says that vibration is active, use the rigid values.
The law of equipartition of energy
For a gas in thermal equilibrium at temperature T, the average energy associated with each quadratic term in the molecular energy is (1/2) k T. A molecule with f active degrees of freedom therefore has mean energy (f/2) k T and one mole has internal energy U = (f/2) R T. For an ideal gas U depends only on T, and for n moles U = (f/2) n R T. This is why the mean translational energy is (3/2) k T for every gas: translation always supplies three terms. The rotational energy of a rigid diatomic molecule is k T, from two terms.
Specific heats: Cv, Cp and gamma
At constant volume all the heat raises internal energy: dU = n Cv dT, so Cv = (f/2) R per mole. At constant pressure the gas also does work P dV = n R dT, so Cp = Cv + R = (f/2 + 1) R (Mayer relation). The ratio gamma = Cp/Cv = 1 + 2/f. For f = 3, 5 and 6 these give 5/3, 7/5 and 4/3. Cv is 12.5 J/(mol K) for monatomic gas and 20.8 J/(mol K) for rigid diatomic gas when R = 8.3. A large f means a smaller gamma, because more of the heat goes into internal degrees of freedom.
Mixtures of gases
When two ideal gases at the same temperature are present, every molecule gets its own (f/2) k T on average, so the energies add: U = (n1 f1/2 + n2 f2/2) R T. The mixture has Cv = (n1 Cv1 + n2 Cv2)/(n1 + n2) per mole, Cp = Cv + R and gamma = Cp/Cv. Because Cv and Cp add as heat capacities, gamma of a mixture cannot be found by averaging the individual gammas. If two gases at different temperatures are mixed in a rigid insulated vessel, total internal energy is conserved and the final temperature is a weighted mean with weights n Cv.
Mean free path and collision frequency
The mean free path is the average distance a molecule travels between two successive collisions. For molecules of diameter d at number density n_v it is lambda = 1/(sqrt(2) pi d² n_v). Putting n_v = P/(k T) gives lambda = k T / (sqrt(2) pi d² P). The sqrt(2) arises because all the molecules are moving, not only the one we follow. At constant temperature lambda is inversely proportional to the pressure, and at constant volume (fixed n_v) it does not change with temperature. The collision frequency is the mean speed divided by lambda, so it is proportional to n_v sqrt(T).
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
Find the internal energy of 1.0 mol of a rigid diatomic ideal gas at 300 K, taking R = 8.3 J/(mol K).
| Step | Marks |
|---|---|
| A rigid diatomic molecule has f = 5 (3 translational and 2 rotational). | 1 |
| U = (f/2) n R T = 2.5 x 1.0 x 8.3 x 300. | 1 |
| U = 6225 J. | 1 |
| Total: 3 marks | 3 |
Answer: 6225 J
Fast method: R T = 2490 J; times 2.5 is 6225 J.
Sanity check: Units: mol x J/(mol K) x K = J. Translation alone would give 1.5 R T = 3735 J, smaller than the total, as the rotational part adds R T = 2490 J: 3735 + 2490 = 6225 J.
Example 2 (easy)
Find gamma (Cp/Cv) for an ideal gas whose molecules have 6 active degrees of freedom.
| Step | Marks |
|---|---|
| Cv = (f/2) R = 3 R. | 1 |
| Cp = Cv + R = 4 R. | 1 |
| gamma = Cp/Cv = 4/3 = 1.33. | 1 |
| Total: 3 marks | 3 |
Answer: gamma = 1.33
Fast method: gamma = 1 + 2/f = 1 + 2/6 = 1.333.
Sanity check: Units: dimensionless and between 1 and 1.67 for all ideal gases. Limit f = 3 gives 1.67 and f very large tends to 1; 1.33 lies between 1.40 (f = 5) and 1, consistent with a larger f.
Example 3 (medium)
Cp for one mole of an ideal gas is 29.05 J/(mol K). Taking R = 8.3 J/(mol K), find the number of degrees of freedom.
| Step | Marks |
|---|---|
| Mayer relation: Cv = Cp - R = 29.05 - 8.3 = 20.75 J/(mol K). | 1 |
| Cv = (f/2) R, so f = 2 Cv / R. | 1 |
| f = 2 x 20.75/8.3 = 5.0, a rigid diatomic gas. | 1 |
| Total: 3 marks | 3 |
Answer: f = 5
Fast method: Cp/R = 29.05/8.3 = 3.5 = f/2 + 1, so f = 5.
Sanity check: Units: J/(mol K) over J/(mol K) is a pure number. The result is a whole number, which it must be; a fractional answer would mean an arithmetic slip.
Example 4 (medium)
A diatomic gas is at a temperature high enough for vibration to be active. Find the heat needed to raise 1.0 mol by 10 K at constant volume, taking R = 8.3 J/(mol K).
| Step | Marks |
|---|---|
| With vibration active, f = 3 + 2 + 2 = 7. | 1 |
| Cv = (7/2) R = 3.5 x 8.3 = 29.05 J/(mol K). | 1 |
| Q = n Cv dT = 1.0 x 29.05 x 10 = 290.5 J. | 1 |
| Total: 3 marks | 3 |
Answer: 290.5 J
Fast method: Q = 3.5 x R x dT = 3.5 x 83 = 290.5 J.
Sanity check: Units: J. The rigid-molecule value 2.5 R x 10 = 207.5 J is smaller; active vibration stores extra energy so the heat needed is larger, which agrees with 290.5 J.
Example 5 (medium)
At 1.0 x 10⁵ Pa the mean free path of a gas at 300 K is 1.0 x 10⁻7 m. Find the mean free path at the same temperature when the pressure is reduced to 1.0 Pa, in mm.
| Step | Marks |
|---|---|
| At constant temperature, lambda = k T / (sqrt(2) pi d² P) is proportional to 1/P. | 1 |
| Pressure falls by a factor 1.0 x 10⁵, so lambda rises by 1.0 x 10⁵. | 1 |
| lambda = 1.0 x 10⁻7 x 10⁵ = 1.0 x 10⁻2 m = 10 mm. | 1 |
| Total: 3 marks | 3 |
Answer: 10 mm
Fast method: lambda x P is constant: 10⁻7 x 10⁵ / 1 = 10⁻2 m.
Sanity check: Units: m converted to mm by x 1000. A mean free path of about a centimetre at 1 Pa is the reason that low-pressure (vacuum) tubes let particles travel a long way without collision, far larger than the 10⁻7 m at atmospheric pressure.
Example 6 (hard, multi-step)
A mixture of 2.0 mol of monatomic gas and 1.0 mol of rigid diatomic gas is heated through 30 K at constant pressure. Taking R = 8.3 J/(mol K), find the change in internal energy of the mixture in J.
| Step | Marks |
|---|---|
| Cv values: monatomic 1.5 R, diatomic 2.5 R. Cp values: 2.5 R and 3.5 R. | 1 |
| Heat at constant pressure Q = (2 x 2.5 + 1 x 3.5) R dT = 8.5 x 8.3 x 30 = 2116.5 J. | 2 |
| Work done by the gas W = (n1 + n2) R dT = 3 x 8.3 x 30 = 747 J. | 2 |
| Change in internal energy = Q - W = 2116.5 - 747 = 1369.5 J (equals (2 x 1.5 + 2.5) R dT = 5.5 x 249). | 1 |
| Total: 6 marks | 6 |
Answer: about 1369.5 J
Fast method: dU = (sum of n Cv) dT = (3 + 2.5) x 8.3 x 30 = 5.5 x 249 = 1369.5 J; no need to find Q or W.
Sanity check: Units: J. Check: ratio dU/Q = 5.5/8.5 = 0.647, between f/(f + 2) = 0.6 (f = 3) and 0.714 (f = 5), as a mixture of the two gases must give.
Example 7 (hard, multi-step)
For nitrogen treated as hard spheres of diameter 3.0 x 10⁻10 m at 300 K and 1.0 x 10⁵ Pa, find the collision frequency in units of 10⁹ per second. Use k = 1.38 x 10⁻23 J/K, molar mass 0.028 kg/mol, N_A = 6.022 x 10²3 per mol, mean speed sqrt(8 k T/(pi m)) and lambda = k T/(sqrt(2) pi d² P).
| Step | Marks |
|---|---|
| Mass of one molecule m = 0.028/(6.022 x 10²3) = 4.65 x 10⁻26 kg. | 1 |
| Mean speed = sqrt(8 x 1.38 x 10⁻23 x 300 / (pi x 4.65 x 10⁻26)) = 476 m/s. | 2 |
| Mean free path lambda = 1.035 x 10⁻7 m (from k T / (sqrt(2) pi d² P)). | 2 |
| Collision frequency = 476 / 1.035 x 10⁻7 = 4.6 x 10⁹ per second, so the answer is 4.6. | 1 |
| Total: 6 marks | 6 |
Answer: about 4.6 (x 10⁹ per second)
Fast method: Speed about 476 m/s and lambda about 10⁻7 m give about 4.6 x 10⁹ collisions per second for each molecule.
Sanity check: Units: (m/s)/m = per s. Order of magnitude: a molecule travels 476 m/s, and covers about 5 x 10⁹ mean free paths of 10⁻7 m each second, the usual 10⁹ to 10¹0 per second for gases at atmospheric pressure.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Degrees of freedom (rigid) | monatomic 3; diatomic 5; linear triatomic 5; non-linear polyatomic 6; each active vibration adds 2 | rigid molecules at ordinary temperature; vibration counts only when active | dimensionless | Example 1 |
| Equipartition | (1/2) k T per quadratic term; U = (f/2) n R T | classical equipartition, ideal gas in thermal equilibrium | J | Example 1 |
| Molar heat capacities | Cv = (f/2) R; Cp = (f/2 + 1) R; Cp - Cv = R | ideal gas with f active degrees of freedom; Cp - Cv = R for any ideal gas | J/(mol K) | Example 2 |
| Ratio of specific heats | gamma = 1 + 2/f: 1.67 (f=3), 1.40 (f=5), 1.33 (f=6) | ideal gas with f active degrees of freedom | dimensionless | none |
| Heat at constant V and constant P | Q = n Cv dT; Q = n Cp dT; W = n R dT | ideal gas, constant Cv and Cp; Cv for constant volume, Cp for constant pressure | J | Example 4 |
| Mixture | Cv = sum(n Cv)/sum(n); gamma = (Cv + R)/Cv | non-reacting ideal gases mixed, constant heat capacities | J/(mol K) (dimensionless) | Example 6 |
| Final temperature on mixing (rigid, insulated) | T = (sum n Cv T)/(sum n Cv) | non-reacting ideal gases mixed in insulated rigid container, no work or heat exchange | K | none |
| Mean free path | lambda = k T / (sqrt(2) pi d² P) = 1/(sqrt(2) pi d² n_v) | ideal gas of hard spheres, d is molecular diameter | m | Example 5 |
| Collision frequency | nu = v_mean / lambda; v_mean = sqrt(8 k T/(pi m)) | ideal gas of hard spheres at temperature T; mean speed from Maxwell distribution | per s | Example 7 |
Common mistakes and speed
- Taking f = 7 for a diatomic gas without being told that vibration is active. Why it tempts: A diatomic molecule does have a vibrational mode and students recall seven terms from the high-temperature case; at room temperature the standard value is 5, and the option with 7 is placed for this slip.
- Averaging the gamma values of the two gases in a mixture. Why it tempts: An average looks natural, but heat capacities, not ratios, add. The wrong value 1.51 sits close to the correct 1.48.
- Using Cp instead of Cv for heating at constant volume (or the reverse). Why it tempts: Both are written as multiples of R, and the process may be hidden in the wording; the work term R dT then goes in or out of the answer.
- Omitting the sqrt(2) or using the radius instead of the diameter in the mean free path. Why it tempts: The simpler formula 1/(pi d² n) is easier to remember and the stem often gives only the molecular size; the wrong results differ by 41 percent or a factor of four.
- Taking the final temperature of mixed gases as the mole-weighted mean of the temperatures. Why it tempts: Mixing seems to treat all molecules alike; the weights should be n Cv, which differ for monatomic and diatomic gases.
Time per question and fast method
Target: about 90 seconds per question.
Write f first. Then Cv = f/2, Cp = f/2 + 1 in units of R, gamma = 1 + 2/f. For mixtures add n Cv in units of R before anything else. For lambda use proportionality: lambda is proportional to T/P (and to 1/n_v); collision frequency is proportional to P/sqrt(T) at fixed d.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 6 correct. Pick an option for each question.
Practice
- Two moles of a diatomic ideal gas whose molecules are rigid (no vibration) are heated at constant volume… Verified (T1)
- A rigid container holds a mixture of 2.0 mol of a monatomic ideal gas and 3.0 mol of a diatomic ideal gas… Verified (T1)
- Treat nitrogen molecules as hard spheres of diameter 3.0 x 10⁻10 m. At 300 K and 1.0 x 10⁵ Pa the mean free… Verified (T1)
- An ideal gas is heated at constant pressure. The gas absorbs 700 J of heat, and 200 J of this appears as work… Verified (T1)
- A fixed mass of an ideal gas, whose molecules behave as hard spheres of fixed diameter, goes from state… Verified (T1)
- A rigid, thermally insulated vessel is divided by a partition. One side has 1.0 mol of helium at 300 K and… Verified (T1)
- A mixture of 2.0 mol of a monatomic ideal gas and 1.0 mol of a diatomic ideal gas with rigid molecules is… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Degrees of freedom: table and when vibration counts
Monatomic: f = 3 (translation). Diatomic: f = 5 (3 translation + 2 rotation); with vibration active, f = 7. Linear triatomic (CO2): f = 5 rigid; non-linear triatomic (H2O) and non-linear polyatomic (CH4): f = 6 rigid. A molecule with N atoms has 3N coordinates in total; for a non-linear molecule 3 are translation, 3 rotation and 3N - 6 vibrational modes, and each vibrational mode adds 2 to f when active. At room temperature the vibrations of common diatomic gases are not excited, so use f = 5 unless the problem tells you that vibration is active or the temperature is very high. Rotation about the molecular axis of a diatomic molecule is not counted since the moment of inertia is negligible for point-like atoms.
Equipartition and internal energy of an ideal gas
Each quadratic term contributes (1/2) k T per molecule or (1/2) R T per mole. U = (f/2) n R T. A change of internal energy is dU = n Cv dT for any process of an ideal gas, whether or not the volume is constant, because U depends only on T. For one mole of rigid diatomic gas at 300 K, U = 2.5 x 8.3 x 300 = 6225 J. For a mixture, U = (sum of n f/2) R T. The translational part (3/2) k T per molecule is the same for all gases at one temperature; the total includes rotation and vibration. When the question asks for the energy of a particular kind of motion, count only those terms: rotational energy of one mole of rigid diatomic gas is R T.
Cp, Cv, gamma and the Mayer relation
Cp - Cv = R holds for one mole of an ideal gas. Cv = (f/2) R, Cp = (f/2 + 1) R, gamma = (f + 2)/f. Rigid values: monatomic Cv = 1.5 R, Cp = 2.5 R, gamma = 1.67; diatomic 2.5 R, 3.5 R, 1.40; non-linear polyatomic 3 R, 4 R, 1.33. Specific heat per unit mass is c = C/M. In an isobaric process the fraction of supplied heat that is work is R/Cp = 2/(f + 2) (for diatomic 2/7 = 28.6 percent), the fraction going to internal energy is f/(f + 2). Work done by the gas at constant pressure is n R dT, so heat can be found from the work or the work from the heat without knowing n or R.
Mixtures: heat capacity, gamma and final temperature
For n1 moles of one gas and n2 of another: Cv(mix) = (n1 Cv1 + n2 Cv2)/(n1 + n2), Cp(mix) = Cv(mix) + R, gamma(mix) = Cp(mix)/Cv(mix). Equivalent form: 1/(gamma - 1) = (n1/(gamma1 - 1) + n2/(gamma2 - 1))/(n1 + n2), because Cv = R/(gamma - 1). For 2 mol of monatomic and 3 mol of rigid diatomic gas, Cv = 2.1 R and gamma = 1.476, not the mean 1.51. If the two gases start at T1 and T2 in a rigid insulated container, the final temperature is (n1 Cv1 T1 + n2 Cv2 T2)/(n1 Cv1 + n2 Cv2). With no work and no heat exchange the sum of internal energies is conserved; mole-weighted averaging of temperature is wrong when Cv differ.
Mean free path: formula, dependence and orders of magnitude
lambda = k T / (sqrt(2) pi d² P) = 1/(sqrt(2) pi d² n_v). Dependence: lambda is proportional to T/P, inversely proportional to d² and, at fixed volume, independent of temperature (n_v fixed). At fixed pressure it is proportional to T. For air-like gas at room temperature and 1 atmosphere it is about 10⁻7 m, around a few hundred molecular diameters, and it grows in proportion as pressure falls. The mean speed is sqrt(8 k T/(pi m)), and the collision frequency is v_mean/lambda, of the order of 10⁹ per second at ordinary conditions. A common slip is using the radius for d: d is the closest distance between centres, the sum of the two radii. Dropping sqrt(2) changes the answer by 41 percent.
What examiners test and edge cases
Items usually ask: value of f for a named gas, with a hint about vibration; heat at constant volume or constant pressure for n moles; the ratio Cp/Cv of a mixture; the fraction of heat converted into work; the final temperature when two gases are mixed in an insulated rigid vessel; the effect on lambda or on collision frequency of changing T, P or V; and a numerical mean free path. Edge cases: Cp - Cv = R holds for ideal gases only; gamma falls as f rises; at very low temperature rotation is frozen and a diatomic gas behaves as f = 3; at very high temperature vibration adds to f. The equation lambda = k T/(sqrt(2) pi d² P) assumes hard-sphere molecules of fixed diameter, so ask whether the diameter is stated to be constant before using proportionality in P and T.
Memory hook
Suppose a dhaba charges Rs 10 for every extra helping of any dish on your thali, whatever the dish, and you want to raise every dish on the plate by one extra helping.
- With 3 dishes on the plate, the bill for one extra helping of each is 3 x Rs 10 = Rs 30.
- With 5 dishes, the same rule gives 5 x Rs 10 = Rs 50, because every dish costs the same Rs 10.
- So the bill is (number of dishes) x Rs 10. In the gas, each dish is one quadratic energy term and the Rs 10 is (1/2) R per kelvin per mole, so the heat per kelvin is (number of terms) x (1/2) R = (f/2) R.
Each degree of freedom is a dish that takes an equal share (1/2) k T of the energy, so more degrees of freedom means a larger Cv = (f/2) R and a smaller gamma = 1 + 2/f.
Every dish gets the same share: the more dishes (degrees of freedom), the more heat it takes to warm the gas.
Revision card
Try to answer each without looking above.
- State the degrees of freedom for monatomic, rigid diatomic and rigid non-linear polyatomic molecules, and the effect of active vibration.
- State the law of equipartition and write the internal energy of n moles of a gas with f degrees of freedom.
- Write Cv, Cp and gamma in terms of f and give the Mayer relation.
- How do you find gamma and the final temperature for a mixture of two gases?
- Write the formula for the mean free path and say how it depends on T, P, V and d.
- In an isobaric process, what fraction of the heat does work for monatomic and rigid diatomic gases?
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 3; fixed: 3
- Report: content/reviews/learn5-ktg-2026-11-20.md
Textbook references
- NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 12: Kinetic Theory, 12.5 Law of equipartition of energy (read 2026-11-22)
- NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 12: Kinetic Theory, 12.6.2 Diatomic gases (read 2026-11-22)
- NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 12: Kinetic Theory, 12.6.3 Polyatomic gases (read 2026-11-22)
- NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 12: Kinetic Theory, Summary SUMMARY (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 9 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
- Standard results of kinetic theory of gases at school and first-year level; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.