EngineeringRise

Standing Waves, Organ Pipes and Beats: JEE Main Notes

Reviewed Last updated 2026-11-20. Syllabus topic: Standing waves, organ pipes and beats.

In short. String fixed at both ends and open pipe: f_n = n v/(2 L), all harmonics. Closed pipe: f = (2n - 1) v/(4 L), odd harmonics only. Nodes are fixed ends or closed ends; antinodes are open ends. Beats occur at |f1 - f2| per second.

  • Standing wave: y = 2 A sin(k x) cos(omega t) with fixed end at x = 0; nodes are lambda/2 apart and antinodes lie midway between them.
  • String fixed at both ends and open pipe: L = n lambda/2, so f_n = n v/(2 L), n = 1, 2, 3, ...; the fundamental is the first harmonic.
  • Closed pipe: node at the closed end, antinode at the open end, L = (2n - 1) lambda/4, f = (2n - 1) v/(4 L); the overtones are the 3rd, 5th, ... harmonics.
  • Overtone numbering: the first overtone of a string or open pipe is the 2nd harmonic; the first overtone of a closed pipe is the 3rd harmonic.
  • Beat frequency = |f1 - f2|; the magnitude of the resultant amplitude, |2 A cos(pi (f1 - f2) t)|, peaks |f1 - f2| times per second.

Syllabus line: Oscillations and Waves Oscillations and periodic motion: time period, frequency, displacement as a function of time, periodic functions. Simple harmonic motion (S.H.M.) and its equation, phase, oscillations of a spring: restoring force and force constant, energy in S.H.M.: kinetic and potential energies, simple pendulum: derivation of expression for its time period. Wave motion, longitudinal and transverse waves, speed of the travelling wave, displacement relation for a progressive wave, principle of superposition of waves, reflection of waves, standing waves in strings and organ pipes, fundamental mode and harmonics, beats. (NTA JEE (Main) 2026 syllabus, Physics, Unit 10 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

Related topics

The concept step by step

  1. How a standing wave forms

    When a travelling wave is reflected and the reflected wave overlaps the incident one, the two (same frequency, same amplitude, opposite directions) superpose. With a fixed end at x = 0, y1 = A sin(omega t - k x) and the reflected y2 = -A sin(omega t + k x); their sum is y = -2 A sin(k x) cos(omega t). Every point oscillates in SHM at the same frequency, but the amplitude 2 A sin(k x) depends on position. There is no net transport of energy along the medium.

  2. Nodes, antinodes and the allowed modes of a string

    Points with zero amplitude (sin k x = 0) are nodes, spaced lambda/2 apart; points of maximum amplitude 2 A are antinodes, also lambda/2 apart and midway between nodes. A string of length L fixed at both ends must have a node at each end, so L = n lambda/2 and f_n = n v/(2 L) with v = sqrt(T/mu). n = 1 is the fundamental (first harmonic) with one loop; n = 2, 3 are the second and third harmonics with two and three loops. All integer multiples of the fundamental are present.

  3. Open organ pipe

    In a pipe open at both ends the air at each open end is free to move, so each end is an antinode of displacement. The condition is L = n lambda/2, giving f_n = n v/(2 L) with n = 1, 2, 3, ...: the same set as the fixed string, with all harmonics. Here v is the speed of sound. The fundamental has an antinode at each end and a node in the middle. In JEE Main the end correction is neglected unless the question gives it.

  4. Closed organ pipe

    In a pipe closed at one end the closed end is a displacement node (the air cannot move) and the open end an antinode. The shortest pattern is a quarter wavelength: L = lambda/4, f1 = v/(4 L). The allowed lengths are odd multiples of lambda/4, L = (2n - 1) lambda/4, so f = (2n - 1) v/(4 L) = f1, 3 f1, 5 f1, ... Only odd harmonics occur. A closed pipe of length L has the same fundamental as an open pipe of length 2 L, and its overtones are the 3rd, 5th, ... harmonics (first overtone = 3 f1).

  5. Harmonics versus overtones

    The fundamental is the first harmonic. Overtones are counted from the second mode on the frequencies that exist: for a string or open pipe the first overtone is the second harmonic (2 f1), the second overtone the third harmonic (3 f1). For a closed pipe the first overtone is the third harmonic (3 f1), the second overtone the fifth harmonic (5 f1). Mixing these numbers is the commonest error in this topic, so write the harmonic number explicitly before using any formula.

  6. Beats

    When two sound waves of nearly equal frequencies f1 and f2 and similar amplitudes reach the ear together, the loudness rises and falls periodically. y = A sin(2 pi f1 t) + A sin(2 pi f2 t) = 2 A cos(pi (f1 - f2) t) sin(pi (f1 + f2) t): the envelope 2 A cos(pi (f1 - f2) t) itself has frequency |f1 - f2|/2, but the loudness depends on its magnitude (the intensity on its square), which peaks |f1 - f2| times per second. The number of beats per second is |f1 - f2|; the effect is audible only when the difference is small, a few hertz up to about ten. Loading a fork with wax lowers its frequency; filing it raises it. Use this to decide which of the two possible frequencies is correct.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

A string of length 0.80 m is fixed at both ends and waves travel on it at 320 m/s. Find the fundamental frequency and the frequency of the third harmonic.

Marks-style solution of example 1
StepMarks
For fixed ends L = lambda/2 in the fundamental, so f1 = v/(2 L).1
f1 = 320/(2 x 0.80) = 200 Hz.1
Third harmonic = 3 x 200 = 600 Hz.1
Total: 3 marks3

Answer: f1 = 200 Hz; third harmonic 600 Hz

Fast method: f1 = v/2L = 320/1.6 = 200 Hz; f3 = 3 f1 = 600 Hz.

Sanity check: Units: (m/s)/m = Hz. Wavelength in the fundamental is 2 L = 1.6 m, and v/lambda = 320/1.6 = 200 Hz, consistent.

Example 2 (easy)

A pipe closed at one end has length 0.25 m. The speed of sound is 340 m/s. Find its fundamental frequency and the next resonant frequency.

Marks-style solution of example 2
StepMarks
Closed pipe: L = lambda/4, so f1 = v/(4 L).1
f1 = 340/(4 x 0.25) = 340 Hz.1
The next mode is the third harmonic, 3 x 340 = 1020 Hz.1
Total: 3 marks3

Answer: f1 = 340 Hz; next 1020 Hz

Fast method: v/4L = 340/1.0 = 340 Hz, and the next frequency is 3 times that, since even harmonics are absent.

Sanity check: Units: Hz. Wavelength of the fundamental is 4 L = 1.0 m, and v/lambda = 340 Hz. An open pipe of the same length would give 680 Hz, an octave higher, as expected.

Example 3 (medium)

An organ pipe open at both ends has length 0.85 m. The speed of sound is 340 m/s. How many of its harmonics lie at or below 1000 Hz? Give that count as the check value.

Marks-style solution of example 3
StepMarks
f1 = v/(2 L) = 340/1.70 = 200 Hz.1
Harmonics are 200 n Hz, n = 1, 2, 3, ...1
200 n <= 1000 gives n <= 5.1
Five harmonics: 200, 400, 600, 800, 1000 Hz.1
Total: 4 marks4

Answer: 5 harmonics

Fast method: f1 = 200 Hz, so up to 1000 Hz there are 1000/200 = 5 harmonics (the last one exactly at 1000 Hz).

Sanity check: A closed pipe of the same length would give only the odd harmonics 200, 600 and 1000 Hz, which is 3 modes, so the open pipe having 5 is consistent: it carries both odd and even harmonics.

Example 4 (medium)

A tuning fork A of frequency 256 Hz gives 4 beats per second with fork B. When B is loaded with a little wax, the number of beats per second falls to 2. Find the original frequency of B.

Marks-style solution of example 4
StepMarks
Beats = |f_B - 256| = 4, so f_B = 252 Hz or 260 Hz.1
Loading lowers f_B. If f_B were 252 Hz, loading would move it further away, and beats would increase.1
If f_B = 260 Hz, loading lowers it towards 256, and beats decrease, as observed (to 2).1
The original frequency of B is 260 Hz.1
Total: 4 marks4

Answer: 260 Hz

Fast method: Beats decreased after the frequency was lowered, so B was above A: 256 + 4 = 260 Hz.

Sanity check: After loading B is 258 Hz, which gives |258 - 256| = 2 beats, as stated. The other candidate 252 Hz would give |250 - 256| = 6 beats, which contradicts the data.

Typical trap: Assuming the unknown fork is the lower one (252 Hz) without using the second observation. Loading lowers the frequency; the change in the beat rate tells which side of the reference the fork lies on.

Example 5 (hard)

A pipe closed at one end has length 0.50 m and the speed of sound is 340 m/s. Find the frequency of its second overtone. Give the frequency in Hz as the check value.

Marks-style solution of example 5
StepMarks
Closed pipe harmonics are odd: 1st, 3rd, 5th, ... The overtones are the 3rd (first), 5th (second).2
f1 = v/(4 L) = 340/(4 x 0.50) = 170 Hz.1
Second overtone = fifth harmonic = 5 x 170 = 850 Hz.1
Total: 4 marks4

Answer: 850 Hz

Fast method: Second overtone of a closed pipe is the 5th harmonic: 5 x 170 = 850 Hz. Taking the 3rd harmonic gives the tempting 510 Hz.

Sanity check: Wavelength of the 5th harmonic: L = 5 lambda/4 so lambda = 0.40 m, and v/lambda = 340/0.40 = 850 Hz. Consistent.

Typical trap: Reading the second overtone as the third harmonic. For a string or open pipe the second overtone is the 3rd harmonic, but for a closed pipe it is the 5th, because the even harmonics are missing.

Example 6 (hard, multi-step)

A string of length 0.60 m and linear density 0.010 kg/m is fixed at both ends and held at a tension of 144 N. Find its fundamental frequency, the frequency when it vibrates in three loops, and the distance from one end of the nearest node other than that end, in the third harmonic. Give the third-harmonic frequency in Hz as the check value.

Marks-style solution of example 6
StepMarks
v = sqrt(T/mu) = sqrt(144/0.010) = sqrt(14400) = 120 m/s.2
f1 = v/(2 L) = 120/1.20 = 100 Hz.1
Three loops is the third harmonic: f3 = 300 Hz.1
Loop length lambda/2 = L/3 = 0.20 m, so nodes at 0, 0.20, 0.40, 0.60 m: first node from the end at 0.20 m.1
Total: 5 marks5

Answer: f1 = 100 Hz, f3 = 300 Hz, first node 0.20 m from an end

Fast method: v = 120 m/s; f1 = 100 Hz; f3 = 3 f1 = 300 Hz; node spacing L/3 = 0.20 m.

Sanity check: Units: sqrt(N/(kg/m)) = m/s; Hz from (m/s)/m. Check: lambda for the third harmonic is 0.40 m and v/lambda = 120/0.40 = 300 Hz. Antinodes at 0.10, 0.30 and 0.50 m.

Example 7 (hard, multi-step)

In a resonance tube experiment with a tuning fork of frequency 425 Hz, a closed air column resonates first at a length of 0.19 m and next (second resonance) at 0.59 m. This item is an extension beyond the syllabus line, kept as an application of the closed-pipe modes. Find the speed of sound and the end correction, in m/s for the speed.

Marks-style solution of example 7
StepMarks
Successive resonances of a closed column differ by lambda/2: lambda/2 = 0.59 - 0.19 = 0.40 m, so lambda = 0.80 m.2
v = f lambda = 425 x 0.80 = 340 m/s.1
First resonance: L1 + e = lambda/4 = 0.20 m, so e = 0.20 - 0.19 = 0.01 m.1
The speed of sound is 340 m/s with an end correction of 0.01 m.1
Total: 5 marks5

Answer: v = 340 m/s; end correction 0.01 m

Fast method: v = 2 f (L2 - L1) = 2 x 425 x 0.40 = 340 m/s; e = lambda/4 - L1 = 0.01 m.

Sanity check: Units: Hz x m = m/s. Check the second resonance: L2 + e = 0.60 m = 3 lambda/4 = 0.60 m. The end correction is small compared with the tube length, as expected for a narrow tube.

Example 8 (medium)

Two sources of equal amplitude emit sound of frequencies 300 Hz and 306 Hz. Find the number of beats per second, the beat period, and the number of loud maxima heard in 1.5 s. Give the number of beats per second as the check value.

Marks-style solution of example 8
StepMarks
Beat frequency = |f1 - f2| = |306 - 300| = 6 beats per second.1
Beat period = 1/6 s = 0.167 s.1
In 1.5 s the number of maxima = 6 x 1.5 = 9.1
Total: 3 marks3

Answer: 6 beats per second; period 0.167 s; 9 maxima in 1.5 s

Fast method: Beats per second = difference of frequencies = 6; in 1.5 s there are 9.

Sanity check: Units: Hz = s⁻1; maxima = rate x time = dimensionless. The perceived pitch is the mean, 303 Hz, and the beat rate is much smaller than the pitch, as beats require.

Formulas and units

Formula and unit box for Standing waves, organ pipes and beats
ResultFormulaValid whenUnits or noteWorked example
Standing wave (fixed end at x = 0)y = 2 A sin(k x) cos(omega t)string fixed at x = 0; two equal waves travelling oppositelymnone
Node and antinode spacingnode to node = antinode to antinode = lambda/2; node to antinode = lambda/4standing wave of wavelength lambdamExample 6
String fixed at both endsf_n = n v/(2 L) = (n/(2 L)) sqrt(T/mu), n = 1, 2, 3, ...string fixed at both ends, v from sqrt(T/mu)HzExample 1
Open pipef_n = n v/(2 L), n = 1, 2, 3, ...pipe open at both ends; end correction ignoredHzExample 3
Closed pipef = (2 n - 1) v/(4 L) = f1, 3 f1, 5 f1, ...pipe closed at one end; end correction ignoredHzExample 2
Overtone numberingstring or open: 1st overtone = 2nd harmonic; closed: 1st overtone = 3rd harmonicstring, open pipe or closed pipe as stateddimensionlessExample 5
Resonance columnL2 - L1 = lambda/2; v = 2 f (L2 - L1); e = lambda/4 - L1closed resonance column, two successive resonancesm (m/s)Example 7
Beat frequencyf_beat = |f1 - f2|; period 1/f_beattwo sources of close frequencies heard togetherHz (s)Example 4
Resultant of two close frequenciesy = 2 A cos(pi (f1 - f2) t) sin(pi (f1 + f2) t)two waves of equal amplitude and close frequenciesmnone

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Equating the first overtone with the first harmonic, or the second overtone of a closed pipe with the 3rd harmonic. Why it tempts: The word overtone sounds like a synonym for harmonic; for a closed pipe the numbering is shifted twice, and the wrong answer is a neat multiple of f1.
  • Using f = n v/(4 L) for a closed pipe with all n, or v/(2 L) for a closed pipe. Why it tempts: The open-pipe formula is the first one learnt; the closed pipe needs odd multiples and L = lambda/4.
  • Taking the open pipe as having a node at the open end. Why it tempts: The string fixed at both ends has nodes at the ends, and the pipe is drawn like a string; but the open end is a displacement antinode.
  • Choosing between f_A + n and f_A - n for the unknown fork without the loading or filing data. Why it tempts: Both frequencies give the same beat rate, and one option is always the sum.
  • Using the speed of sound for a string, or the string wave speed for a pipe. Why it tempts: Both appear in one problem when a string and a pipe are compared; each system has its own v.

Time per question and fast method

Target: about 90 seconds per question.

Write the allowed frequencies as a list before computing: string or open pipe n f1; closed pipe odd multiples of f1 with f1 = v/(4 L). Convert overtone to harmonic number first. For beats, compute both frequencies, subtract, and use the second observation (loading or filing) to resolve the two candidates. For a count below a limit, divide the limit by f1 (open) or take odd multiples (closed).

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. A string of length 0.50 m fixed at both ends carries waves of speed 100 m/s. Its fundamental frequency, in Hz, is
Show the answer

Answer: B: 100 Hz. f1 = v/(2 L) = 100/1.0 = 100 Hz.

Question 2. A closed pipe has fundamental 100 Hz. Its fourth resonant frequency (fourth allowed mode), in Hz, is
Show the answer

Answer: C: 700 Hz. The allowed modes are 1, 3, 5, 7 times 100 Hz; the fourth is 7 x 100 = 700 Hz.

Question 3. Forks of 440 Hz and 436 Hz sounded together give a beat frequency, in Hz, of
Show the answer

Answer: D: 4 Hz. Beat frequency = |440 - 436| = 4 Hz; 438 Hz is the mean pitch heard.

Question 4. Which pipe supports all harmonics of its fundamental?
Show the answer

Answer: A: Open at both ends. An open pipe has antinodes at both ends, L = n lambda/2, so every integer harmonic exists; a closed pipe has odd harmonics only.

Question 5. The length of a closed pipe is doubled. Its fundamental frequency changes by the factor
Show the answer

Answer: C: 0.5. f1 = v/(4 L) is inversely proportional to L, so doubling L halves f1.

Question 6. The tension in a sonometer wire is made four times with the length unchanged. The fundamental frequency becomes
Show the answer

Answer: D: 2 times. f is proportional to sqrt(T), so it doubles.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Standing waves: equation, nodes, antinodes, phases

For a fixed end at x = 0, y = 2 A sin(k x) cos(omega t). Nodes at k x = n pi, so x = n lambda/2; antinodes at x = (2n + 1) lambda/4. Points between two adjacent nodes oscillate in phase; points on opposite sides of a node are in antiphase. The distance between consecutive nodes (or antinodes) is lambda/2, while the distance from a node to the next antinode is lambda/4. All particles pass through the mean position at the same instant, twice per period, and reach their extremes together. Energy in a loop is exchanged between kinetic and potential forms and does not cross the nodes. Standing wave and travelling wave differ also in amplitude: constant in a travelling wave, position dependent in a standing wave; and in phase, which changes steadily along a travelling wave.

Strings: modes, tension and the sonometer

Fixed-fixed string: f_n = (n/(2 L)) sqrt(T/mu). The fundamental rises as sqrt(T), falls as 1/L and as sqrt(mu): quadrupling the tension doubles the frequency, and halving the length (a finger stop on the sonometer wire) doubles it. A string plucked in the middle excites odd harmonics mainly, because it needs an antinode there. For a string vibrating in n loops the nodes are at x = r L/n, r = 0, 1, ..., n, so for 3 loops on 0.60 m the nodes are at 0, 0.20, 0.40 and 0.60 m. Frequencies of a string are also the natural frequencies for resonance with a tuning fork: when the fork frequency equals f_n the string resonates with large amplitude. The tension must be known in newton and mu in kg/m.

Pipes: open, closed, and extensions (end correction, resonance column)

Open pipe: f_n = n v/(2 L), all harmonics. Closed pipe: f = (2n - 1) v/(4 L), odd harmonics only; so a closed pipe sounds an octave lower than an open pipe of the same length (f1 = v/4L against v/2L), and ratio of the first three resonant frequencies is 1 : 3 : 5. The end correction and resonance column below are extensions beyond the official syllabus line, included only as applications of the modes above. Real pipes have an antinode slightly beyond the open end, by about 0.6 times the radius, the end correction e; then L is replaced by L + e (closed) or L + 2 e (open). In a resonance tube with a tuning fork, two successive resonant lengths L1 and L2 satisfy L2 - L1 = lambda/2, so v = 2 f (L2 - L1); this removes e. The speed of sound v increases with temperature, so the pipe frequency rises on a warm day.

Beats: frequency, resultant and finding an unknown frequency

Beat frequency = |f1 - f2|, and the beat period is its reciprocal. The perceived pitch is the average (f1 + f2)/2. Unknown frequency: if a fork of frequency f_A gives n beats per second with another fork B, then f_B = f_A + n or f_A - n. A second observation decides: loading B (lowering f_B) increases the beat rate if f_B f_A; filing B (raising f_B) does the opposite. The harmonic of one source can beat with the harmonic of another, so compute both frequencies first (pipe harmonics, string harmonics) and then subtract. Beats need the waves to be at the same place and of similar amplitude for good contrast, and are a time effect (interference in time), unlike the spatial interference of two sources.

What examiners test and edge cases

Typical items: harmonics and overtones of strings and pipes; number of harmonics below a limit; common frequencies of an open and a closed pipe; change of pipe frequency when a pipe is filled with water to a part (the air column length changes) or changes length; sonometer frequency and tension; positions of nodes and antinodes; resonance column data; beats between two forks or pipes, and which of two frequencies is right after loading; beat frequency of harmonics. Edge cases: a closed pipe has no even harmonics; the first overtone is not the first harmonic; the end correction is ignored unless given; a string fixed at both ends has v = sqrt(T/mu) but the pipe uses the speed of sound. State the harmonic number before substituting.

Memory hook

Suppose two tanpura strings are tuned to nearly the same note, say one is a hair sharper, and both are plucked together in a quiet room.

  1. The sound seems to swell and fade again and again, a few swells every second; the two strings drift in and out of step.
  2. When one string is tightened a little more, the swelling becomes quicker, and when it is loosened to match the other, the swelling slows to nothing.
  3. A single string held at both ends only "likes" certain patterns: one loop, two loops, three loops, with still points between the loops.

The swells are beats at |f1 - f2| per second; the still points and loops are nodes and antinodes of the standing wave, allowed only when L = n lambda/2.

Fixed ends demand nodes, so only whole numbers of half-waves fit; nearly equal notes swell at their difference.

Revision card

Try to answer each without looking above.

  1. Write the standing wave equation and locate nodes and antinodes.
  2. Write the allowed frequencies of a string fixed at both ends and of an open pipe.
  3. Write the allowed frequencies of a closed pipe and name its first two overtones.
  4. Explain why the open end of a pipe is an antinode and the closed end a node.
  5. State the beat frequency and how loading or filing a fork resolves f_A + n versus f_A - n.
  6. Use two resonance lengths of a closed column to find the speed of sound.

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 6; fixed: 6
  • Report: content/reviews/learn4-osc-2026-11-20.md

Textbook references

  • NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 14: Waves, 14.6.1 Standing Waves and Normal Modes (read 2026-11-22)
  • NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 14: Waves, Example 14.5 Example 14.5 (read 2026-11-22)
  • NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 14: Waves, Summary Summary (read 2026-11-22)
  • NCERT Physics Part 2, Class 11 (reprint 2026-27), Chapter 14: Waves, 14.7 Beats (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Physics, Unit 10 (https://jeemain.nta.nic.in/document/syllabus-2026/), imported into syllabus/lines/jee-main/2026.json
  • NTA JEE (Main) 2026 syllabus, Physics, Unit 10 (https://jeemain.nta.nic.in/document/syllabus-2026/), read for scope
  • Standard results of school-level oscillations and waves; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.