EngineeringRise

Arrhenius Equation and Collision Theory: JEE Main Notes

Reviewed Last updated 2026-11-20. Syllabus topic: Temperature dependence, Arrhenius equation and collision theory.

In short. k = A e^(-Ea/RT): the rate constant rises with temperature because a larger fraction of collisions has energy of at least Ea. Two temperatures give ln(k2/k1) = (Ea/R)(1/T1 - 1/T2); keep R and Ea in the same energy unit. A catalyst lowers Ea.

  • Arrhenius: k = A e^(-Ea/RT); ln k = ln A - Ea/(RT); the plot of ln k against 1/T has slope -Ea/R.
  • Two temperatures: ln(k2/k1) = (Ea/R)(1/T1 - 1/T2), or log10(k2/k1) = (Ea/2.303R)(1/T1 - 1/T2).
  • Use R = 8.314 J mol⁻1 K⁻1 with Ea in J mol⁻1; the answer is usually reported in kJ mol⁻1.
  • A catalyst lowers Ea, increasing k for both directions; it does not change the enthalpy change or the equilibrium constant.
  • Collision theory (bimolecular gases): k = P Z_AB e^(-Ea/RT); effective collisions need energy of at least Ea and proper orientation.

Syllabus line: CHEMICAL KINETICS Rate of a chemical reaction, factors affecting the rate of reactions: concentration, temperature, pressure and catalyst, elementary and complex reactions, order and molecularity of reactions, rate law, rate constant and its units, differential and integral forms of zero and first-order reactions, their characteristics and half-lives, the effect of temperature on the rate of reactions, Arrhenius theory, activation energy and its calculation, collision theory of bi-molecular gaseous reactions (no derivation). (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 8 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

Related topics

The concept step by step

  1. Step 1: Temperature changes k, not the concentrations

    When a mixture is warmed, the concentrations stay the same, yet the reaction goes faster. So the rate constant k must increase with temperature. For many reactions near room temperature k rises by a factor of about two to three for a 10 K rise; this is a rule of thumb, and the Arrhenius equation gives the exact dependence.

  2. Step 2: Activation energy and the energy barrier

    Reactant molecules must pass through a high-energy arrangement before becoming products. The minimum extra energy needed, measured from the reactants, is the activation energy Ea. Plot energy against reaction progress: reactants, a hump of height Ea, then products. Only molecules whose energy reaches the top of the hump can react. Ea is always positive and is in J mol⁻1 or kJ mol⁻1.

  3. Step 3: The Arrhenius equation

    The fraction of molecules with energy of at least Ea is about e^(-Ea/RT), which rises steeply with T. So k = A e^(-Ea/RT), where A is the pre-exponential (frequency) factor with the same units as k. Taking logs: ln k = ln A - Ea/(RT), so a plot of ln k against 1/T is a straight line with slope -Ea/R and intercept ln A.

  4. Step 4: Two temperatures, and the units trap

    Subtract ln k = ln A - Ea/(RT) written at T1 from that at T2: ln(k2/k1) = (Ea/R)(1/T1 - 1/T2). Temperatures must be in kelvin. R = 8.314 J mol⁻1 K⁻1, so Ea must be in J mol⁻1; if Ea is given in kJ mol⁻1, multiply by 1000 first. If you use ln, use the natural logarithm, and if you use log10, divide Ea/R by 2.303.

  5. Step 5: Catalyst

    A catalyst provides a different path with a lower activation energy, so e^(-Ea/RT) is larger and k increases. The catalyst speeds the forward and the backward reaction by the same factor. It does not change the enthalpy change, the Gibbs energy change or the equilibrium constant; it only helps the system reach equilibrium sooner.

  6. Step 6: Collision theory in one line

    For a bimolecular gas reaction, the rate depends on the number of collisions per second between the molecules, Z_AB, and on the fraction of collisions that are effective. A collision is effective only if the colliding pair has energy of at least the threshold energy and has the right orientation. This gives k = P Z_AB e^(-Ea/RT), where P is the steric (orientation) factor, usually less than one. No derivation is needed for JEE Main.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

Using R = 8.314 J mol⁻1 K⁻1, find the fraction of molecules with energy of at least Ea = 50.0 kJ mol⁻1 at 300 K, taking the fraction as e^(-Ea/RT).

Marks-style solution of example 1
StepMarks
Convert: Ea = 50 000 J mol⁻1.1
Ea/RT = 50 000 / (8.314 x 300) = 20.05.1
Fraction = e^(-20.05) = 1.97 x 10⁻9.1
Total: 3 marks3

Answer: 1.97 x 10⁻9

Fast method: e⁻20 is about 2 x 10⁻9; the extra 0.05 in the exponent trims it slightly.

Sanity check: The fraction is very small yet non-zero, which is the correct order: only a tiny fraction of collisions are energetic enough at room temperature.

Example 2 (easy)

A plot of ln k against 1/T is a straight line of slope -6.0 x 10³ K. Find Ea in kJ mol⁻1 (R = 8.314 J mol⁻1 K⁻1).

Marks-style solution of example 2
StepMarks
Slope = -Ea / R.1
Ea = 6.0 x 10³ K x 8.314 J mol⁻1 K⁻1 = 49 884 J mol⁻1.1
Ea = 49.9 kJ mol⁻1.1
Total: 3 marks3

Answer: 49.9 kJ mol⁻1

Fast method: 6000 x 8.314 is about 50 000 J.

Sanity check: Typical activation energies are tens of kJ mol⁻1, so 50 kJ mol⁻1 is realistic.

Example 3 (medium)

The rate constant of a reaction is 1.0 x 10⁻3 s⁻1 at 300 K and 3.0 x 10⁻3 s⁻1 at 310 K. Find Ea (R = 8.314 J mol⁻1 K⁻1, ln 3 = 1.099).

Marks-style solution of example 3
StepMarks
ln(k2/k1) = ln 3 = 1.099.1
Ea = R ln(k2/k1) x T1 T2/(T2 - T1) = 8.314 x 1.099 x (300 x 310 / 10).2
Ea = 8.314 x 1.099 x 9300 = 84 975 J mol⁻1.1
Ea = 85.0 kJ mol⁻1.1
Total: 5 marks5

Answer: 85 kJ mol⁻1 (84.9 with ln 3 = 1.0986)

Fast method: T1 T2/(T2 - T1) = 9300 K; Ea = 9300 x 8.314 x 1.099 / 1000.

Sanity check: A tripling of k over 10 K near 300 K needs a bit more than the 53.6 kJ mol⁻1 that doubles it, consistent with 85 kJ mol⁻1.

Example 4 (medium)

A first-order reaction has Ea = 80.0 kJ mol⁻1 and k = 1.0 x 10⁻2 s⁻1 at 400 K. Find k at 500 K (R = 8.314 J mol⁻1 K⁻1).

Marks-style solution of example 4
StepMarks
Convert: Ea = 80 000 J mol⁻1.1
ln(k2/k1) = (80 000/8.314)(1/400 - 1/500) = 9622.3 x 5.0 x 10⁻4 = 4.811.2
k2/k1 = e⁴.811 = 122.9.1
k2 = 1.0 x 10⁻2 x 122.9 = 1.23 s⁻1.1
Total: 5 marks5

Answer: 1.23 s⁻1

Fast method: Exponent about 4.8, e⁴.8 about 120, times 0.01 gives about 1.2.

Sanity check: A 100 K rise with Ea of 80 kJ mol⁻1 gives a large increase (more than 100-fold) while a result close to k1 would signal the unit error.

Typical trap: Putting Ea = 80 (kJ) with R = 8.314 (J). The exponent becomes (80/8.314)(5.0 x 10⁻4) = 0.0048, giving k2 = 1.005 x 10⁻2 s⁻1, almost unchanged, which looks plausible but is wrong by a factor of 1000 in the exponent.

Example 5 (hard, multi-step)

An uncatalysed reaction has Ea = 100 kJ mol⁻1. A catalyst lowers Ea to 80 kJ mol⁻1 without changing A. At what temperature would the uncatalysed reaction have the same rate constant as the catalysed reaction at 300 K?

Marks-style solution of example 5
StepMarks
Equal k with equal A means equal Ea/(RT), so Ea(uncat)/T = Ea(cat)/300.2
T = 300 x 100 / 80 = 375 K.2
The R factor cancels, so no unit conversion is needed; T = 375 K (that is 102 degrees Celsius).1
Total: 5 marks5

Answer: 375 K

Fast method: Ratio of Ea values 100/80 = 1.25, so 1.25 x 300 = 375.

Sanity check: The uncatalysed reaction needs more warming to match the catalysed one: 375 K is above 300 K, as it must be.

Example 6 (medium)

Find the factor by which the fraction of molecules with energy of at least Ea = 50.0 kJ mol⁻1 increases when the temperature is raised from 300 K to 310 K (R = 8.314 J mol⁻1 K⁻1).

Marks-style solution of example 6
StepMarks
Fraction = e^(-Ea/RT), so the factor is e^[(Ea/R)(1/300 - 1/310)].1
Ea/R = 6014 K and (1/300 - 1/310) = 1.0753 x 10⁻4 K⁻1; product = 0.6467.2
Factor = e⁰.6467 = 1.91.1
Total: 4 marks4

Answer: 1.91 (nearly doubled)

Fast method: Exponent about 0.65; e⁰.65 is about 1.9.

Sanity check: A rise of 10 K with Ea about 50 kJ mol⁻1 gives nearly doubling, which matches the rule of thumb for the rate constant.

Example 7 (hard, multi-step)

For a bimolecular gas reaction, Z_AB = 1.0 x 10¹1 L mol⁻1 s⁻1, the steric factor is P = 0.10, Ea = 60.0 kJ mol⁻1 and T = 350 K (R = 8.314 J mol⁻1 K⁻1). Find k using k = P Z_AB e^(-Ea/RT).

Marks-style solution of example 7
StepMarks
Ea/RT = 60 000 / (8.314 x 350) = 20.62.1
e^(-20.62) = 1.11 x 10⁻9.2
k = 0.10 x 1.0 x 10¹1 x 1.11 x 10⁻9 = 11.1 L mol⁻1 s⁻1.2
Total: 5 marks5

Answer: 11.1 L mol⁻1 s⁻1

Fast method: P Z = 10¹0; times about 10⁻9 gives about 10.

Sanity check: The unit of k for a bimolecular reaction is L mol⁻1 s⁻1, the same as Z_AB; P is dimensionless and below one, so k is below Z_AB (here 11.1 against 1.0 x 10¹1).

Formulas and units

Formula and unit box for Temperature dependence, Arrhenius equation and collision theory
ResultFormulaValid whenUnits or noteWorked example
Arrhenius equationk = A e^(-Ea/RT)T in kelvin; Ea and A nearly independent of Tk and A in the units of k; Ea in J mol⁻1Example 5
Logarithmic formsln k = ln A - Ea/(RT); log10 k = log10 A - Ea/(2.303 R T)T in kelvin; Ea and A nearly independent of Tdimensionlessnone
Slope of ln k against 1/Tslope = -Ea/RArrhenius behaviour; plot of ln k against 1/T is straightKExample 2
Two temperaturesln(k2/k1) = (Ea/R)(1/T1 - 1/T2)T in kelvin; Ea constant between T1 and T2dimensionless; T in kelvinExample 3
Two temperatures (log10)log10(k2/k1) = (Ea/(2.303 R))(1/T1 - 1/T2)T in kelvin; Ea constant between T1 and T2dimensionlessnone
Gas constantR = 8.314 J mol⁻1 K⁻1use with Ea in J mol⁻1J mol⁻1 K⁻1 (convert Ea from kJ to J first)Example 1
Fraction above thresholdfraction = e^(-Ea/RT)approximate Boltzmann fraction, Ea much larger than RTdimensionlessExample 1
Catalyst ratiok(cat)/k(uncat) = exp[(Ea - Ea(cat))/RT] when A is unchangedsame A and same temperature with and without catalystdimensionlessnone
Collision theoryk = P Z_AB e^(-Ea/RT); A = P Z_ABbimolecular gas reaction; Z_AB is collision frequency factorL mol⁻1 s⁻1 for bimolecular reactionsExample 7

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Using Ea in kJ mol⁻1 with R = 8.314 J mol⁻1 K⁻1 (or the reverse). Why it tempts: The stem gives Ea in kJ and R in J, and the arithmetic still produces a number, so the error is not obvious.
  • Using ln and log10 in one equation, e.g. ln(k2/k1) with Ea/(2.303 R). Why it tempts: Both forms are in the notes and the factor 2.303 is memorised as part of the Arrhenius equation.
  • Using temperatures in degrees Celsius. Why it tempts: The stem quotes room temperature as 25 degrees Celsius, and the temperature difference is the same in both scales.
  • Saying a catalyst shifts the equilibrium or changes the enthalpy of reaction. Why it tempts: A faster reaction appears to be a more favourable reaction.
  • Writing the slope of ln k against 1/T as +Ea/R. Why it tempts: The memorised form ln k = ln A - Ea/(RT) is easily recalled as Ea/R, dropping the minus sign, and the slope magnitude is quoted without its sign.

Time per question and fast method

Target: about 110 seconds per question.

Convert Ea to J first (or work in kJ with R = 0.008314). Estimate the exponent before the calculator: Ea/R is about 6000 K for 50 kJ, then times the temperature term. For a doubling over 10 K near 300 K, Ea is about 54 kJ mol⁻1; use that as a sanity check on any answer.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. A plot of ln k against 1/T has slope -4.0 x 10³ K. Ea, in kJ mol⁻1 (R = 8.314 J mol⁻1 K⁻1), is
Show the answer

Answer: A: 33.3. Ea = 4.0 x 10³ x 8.314 = 33 256 J mol⁻1 = 33.3 kJ mol⁻1.

Question 2. A catalyst increases the rate of a reaction by
Show the answer

Answer: C: lowering the activation energy. The catalyst gives a path of lower Ea for both directions; delta H and K are unchanged.

Question 3. By what factor does k increase from 300 K to 310 K when Ea = 40.0 kJ mol⁻1 (R = 8.314 J mol⁻1 K⁻1)?
Show the answer

Answer: A: 1.68. ln factor = (40 000/8.314)(1/300 - 1/310) = 0.517, so factor = 1.68.

Question 4. If P = 0.20 and Z_AB e^(-Ea/RT) = 5.0 x 10² L mol⁻1 s⁻1, then k, in L mol⁻1 s⁻1, is
Show the answer

Answer: A: 100. k = P x (Z_AB e^(-Ea/RT)) = 0.20 x 500 = 100.

Question 5. Which quantity is not changed by a catalyst?
Show the answer

Answer: C: equilibrium constant. The equilibrium constant depends on delta G of the reaction, which a catalyst does not alter.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Effect of temperature on rate

Concentrations do not change when the temperature is raised, so the increase in rate is an increase in the rate constant. The ratio k(T + 10)/k(T) is called the temperature coefficient; for many reactions near room temperature it is about 2 to 3, a rough observation and not a law. The effect is exponential, not linear in T: the increase for a 10 K rise is larger at lower temperatures and for higher activation energy. In terms of the molecular energy distribution, raising T does not shift the most probable energy much, but the area of the tail beyond Ea, the fraction e^(-Ea/RT), increases greatly.

Arrhenius equation, plots and the calculation of activation energy

k = A e^(-Ea/RT) and ln k = ln A - Ea/(RT), or log10 k = log10 A - Ea/(2.303 R T). From a plot of ln k against 1/T, the slope is -Ea/R, so Ea = -slope x R; with a log10 k plot, Ea = -slope x 2.303 R. From two temperatures, ln(k2/k1) = (Ea/R)(1/T1 - 1/T2) = (Ea/R)(T2 - T1)/(T1 T2). Take R = 8.314 J mol⁻1 K⁻1 (or 8.314 x 10⁻3 kJ mol⁻1 K⁻1). If the stem gives Ea in kJ mol⁻1, convert to J before using R in J. Check results: for Ea near 50 kJ mol⁻1 around 300 K, k roughly doubles for 10 K; a result of 1.005 or 10⁵ signals a unit slip. A is also temperature dependent in a weak way, ignored here.

Energy profile and the role of a catalyst

On the energy profile the activation energy of the forward reaction Ea(f) is the height from reactants to the peak, and for the reverse reaction Ea(r) is the height from products to the peak; Ea(f) - Ea(r) = delta H of the reaction. A catalyst lowers the peak, reducing both Ea(f) and Ea(r) by the same amount, so delta H is unchanged and the equilibrium constant is unchanged. With the pre-exponential factor unchanged, the ratio of catalysed to uncatalysed rate constants is exp[(Ea - Ea(cat))/RT]. A small drop of Ea of 15 kJ mol⁻1 at 300 K raises the rate constant about four hundred times, which shows how strong the exponential dependence is.

Collision theory of bimolecular gaseous reactions (no derivation)

The collision frequency Z_AB is the number of collisions between A and B per unit volume per unit time; in problems it is quoted in the units of k, such as L mol⁻1 s⁻1. Not every collision leads to reaction. Effective collisions need (i) energy equal to or greater than the threshold energy (NCERT: the threshold energy is the activation energy plus the energy the reacting species already possess; at JEE level the fraction of collisions with enough energy is taken as e^(-Ea/RT)), and (ii) a proper orientation, accounted for by the steric factor P. The rate constant is k = P Z_AB e^(-Ea/RT), and the Arrhenius pre-exponential factor is A = P Z_AB. Raising the temperature increases Z_AB only slightly but the exponential factor greatly. A bimolecular rate constant has units L mol⁻1 s⁻1 and Z_AB is expressed per mole in those units in problems. The theory is applied to bimolecular gas reactions and is not derived in this syllabus.

Edge cases and what examiners test

Examiners test: Ea from two rate constants at two temperatures (with the J against kJ trap), the new k at a second temperature, the ratio of rate constants when a catalyst lowers Ea, the slope of an ln k against 1/T line, the fraction e^(-Ea/RT) of molecules above the threshold, the effect of temperature on the fraction of effective collisions, the meaning of P and A, and assertion-reason items on catalysts and equilibrium. Conversions: T in kelvin, Ea in J mol⁻1 with R in J. ln x = 2.303 log10 x. A higher Ea means greater sensitivity of k to temperature, so the reaction with the higher Ea has the larger rise in k for the same temperature rise.

Memory hook

Suppose a class of students has to cross a high compound wall to reach the cricket ground, and only students who can jump a fixed height clear it.

  1. On a quiet morning only a few of the most energetic students clear the wall each minute, because few can jump that high.
  2. When everyone has had a glucose drink, many more can reach the height, so many more cross each minute even though the number of students in the class has not changed.
  3. If the wall is lowered (a catalyst) a very large number can cross, and the wall is lowered from both sides, so students coming back from the ground also cross more easily.

The wall is the activation energy, the energy of the students is the energy of the molecules, and the fraction that can clear it is e^(-Ea/RT); warming raises that fraction and a catalyst lowers the wall.

Warming gives more students the energy to clear the wall; a catalyst lowers the wall for everyone.

Revision card

Try to answer each without looking above.

  1. Write the Arrhenius equation and name each symbol with its unit.
  2. What does the slope of ln k against 1/T equal, and how is Ea obtained from it?
  3. Write the two-temperature form and state the units in which Ea and R must be used together.
  4. What does a catalyst change and what does it leave unchanged?
  5. State the two conditions for an effective collision in collision theory.
  6. What is the physical meaning of e^(-Ea/RT) and what happens to it when T rises?

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (see content/reviews/scope-audit-2026-11-20.md)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 3; fixed: 3
  • Report: content/reviews/learn2-kin2-2026-11-20.md

Textbook references

  • NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 3: Chemical Kinetics, Summary Summary (read 2026-11-22)
  • NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 3: Chemical Kinetics, 3.4 Temperature Dependence of the Rate of a Reaction (read 2026-11-22)
  • NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 3: Chemical Kinetics, 3.5 Collision Theory of Chemical Reactions (read 2026-11-22)
  • NCERT Chemistry Part 1, Class 12 (reprint 2026-27), Unit 3: Chemical Kinetics, 3.4.1 Effect of Catalyst (read 2026-11-22)

Sources used

  • Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 8, text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
  • NCERT Class 12 Chemistry, Chemical Kinetics chapter: named as the scope reference only; not opened for this draft, so textbook section references are pending. Content written fresh.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.