EngineeringRise

Electricity and Optics Experiments: JEE Main Notes

Reviewed Last updated 2026-11-21. Syllabus topic: Electricity and optics experiments: metre bridge, Ohm law, galvanometer, mirrors, lenses, prism, diodes.

In short. These experiments each have a working formula: the metre bridge ratio, V = I R from a graph, G = R S/(R - S) for the galvanometer, the mirror and lens formulas by parallax, the prism formula from the minimum deviation, and dV/dI for a diode. Questions test the formula, its inputs and the apparatus corrections.

  • Metre bridge: X/R = l/(100 - l); resistivity rho = X pi d²/(4 L); the best balance is near the middle of the wire.
  • Ohm law: resistance is the slope of the V against I graph; a voltmeter across the resistor draws current, so the true R is higher than V/I_total.
  • Half deflection: G = R S/(R - S), figure of merit k = E/((R + G) theta), in current per division.
  • Parallax: 1/f = 1/u + 1/v for a lens; for a concave mirror the pin at the centre of curvature coincides with its own image, so R = 2 f.
  • Prism: at minimum deviation the ray is symmetric, i = (A + delta_min)/2 and mu = sin((A + delta_min)/2)/sin(A/2); a diode has a knee near 0.7 V (silicon) and a Zener conducts at its breakdown voltage.

Syllabus line: Experimental Skills Familiarity with the basic approach and observations of the experiments and activities: 1. Vernier calipers -its use to measure the internal and external diameter and depth of a vessel. 2. Screw gauge-its use to determine the thickness/ diameter of thin sheet/wire. 3. Simple pendulum-dissipation of energy by plotting a graph between the square of amplitude and time. 4. Metre scale - the mass of a given object by the principle of moments. 5. Young's modulus of elasticity of the material of a metallic wire. 6. Surface tension of water by capillary rise and effect of detergents, 7. Co-efficient of viscosity of a given viscous liquid by measuring the terminal velocity of a given spherical body. 8. Speed of sound in air at room temperature using a resonance tube, 9. Specific heat capacity of a given (i) solid and (ii) liquid by method of mixtures. 10. The resistivity of the material of a given wire using a metre bridge. 11. The resistance of a given wire using Ohm's law. 12. Resistance and figure of merit of a galvanometer by half deflection method. 13. The focal length of (i) Convex mirror (ii) Concave mirror and (iii)Convex lens, using the parallax method. 14. The plot of the angle of deviation vs angle of incidence for a triangular prism. 15. The refractive index of a glass slab using a travelling microscope. 16. Characteristic curves of a p-n junction diode in forward and reverse bias. 17. Characteristic curves of a Zener diode and finding reverse breakdown voltage. 18. Identification of diode, LED, resistor, a capacitor from a mixed collection of such items (NTA JEE (Main) 2026 syllabus, Physics, Unit 20 (https://jeemain.nta.nic.in/document/syllabus-2026/))

Before you start

Prerequisites

  • Current electricity: Ohm law, bridges and resistivity (lesson planned): The metre bridge and Ohm law experiments use balance and V = I R. Read this first if the Wheatstone balance condition is unclear.
  • Optics: mirrors, lenses and prisms (lesson planned): The parallax and prism formulas come from here. Read this first if sign conventions or minimum deviation are unclear.
  • Electronic devices: p-n junction and Zener diode (lesson planned): Diode characteristics need forward and reverse bias. Read this first if the junction behaviour is unclear.

Related topics

The concept step by step

  1. Metre bridge and resistivity of a wire

    The metre bridge is a Wheatstone bridge whose two ratio arms are the two parts of a uniform 100 cm wire. With the unknown X in one gap and a known R in the other, the null point at l cm from the X end gives X/R = l/(100 - l). The resistivity follows from rho = X A/L, with A = pi d²/4 from the screw gauge diameter and L the length of the test wire. Interchange X and R and average the two answers to cancel the end resistances, and choose R so that the null point lies between 40 and 60 cm.

  2. Ohm law and the resistance of a wire

    Connect the wire in series with an ammeter, a rheostat and a cell, with a voltmeter across the wire. Vary the current and record V and I; the plot of V against I is a straight line through the origin and its slope is the resistance R. The graph averages out random errors and shows whether the wire stays ohmic. A voltmeter of finite resistance R_v draws some current, so the ammeter reads the current through the wire plus the voltmeter current; the true resistance is then V/(I - V/R_v), a little higher than V/I.

  3. Galvanometer: resistance and figure of merit

    In the half-deflection method a cell, a large series resistance R and the galvanometer give a deflection theta. A shunt S across the galvanometer, with R left unchanged, is adjusted until the deflection is theta/2. Because R is much larger than G, the total current is almost unchanged, so at half deflection the shunt carries about the same current as the galvanometer and G is close to S. The exact result, from the full circuit (see the notes), is G = R S/(R - S). The figure of merit k is the current per division: k = E/((R + G) theta) amperes per division.

  4. Mirrors and lenses by parallax

    A pin is placed at a known distance from the mirror or lens and an image pin is shifted until there is no parallax between the image and the pin: the two do not move relative to each other when the eye moves sideways. The distances u and v are then read from the optical bench, and 1/f = 1/u + 1/v (magnitudes, with sign convention as required). A convex lens gives a real image and so does a concave mirror; a convex mirror needs an auxiliary convex lens. Plotting 1/v against 1/u gives a straight line whose intercepts on both axes equal 1/f.

  5. Prism, glass slab and diodes

    For a triangular prism the plot of the angle of deviation delta against the angle of incidence i is a curve with a minimum. At minimum deviation the ray passes symmetrically, and mu = sin((A + delta_min)/2)/sin(A/2). A glass slab with a travelling microscope gives mu as real thickness over apparent thickness. A diode characteristic plots current against voltage: in forward bias there is a knee near 0.7 V (silicon), and in reverse bias a Zener diode conducts sharply at its breakdown voltage. Dynamic resistance dV/dI is the slope, not V/I.

Worked examples

Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.

Example 1 (easy)

In a metre bridge the known resistance in the right gap is 10 ohm and the null point is at 45.0 cm from the left end, where X is connected. Find X, in ohm.

Marks-style solution of example 1
StepMarks
X/R = l/(100 - l).1
X = 10 x 45.0/55.0.1
X = 8.18 ohm.1
Total: 3 marks3

Answer: about 8.18 ohm

Fast method: X = 10 x 45/55 = 8.18 ohm.

Sanity check: Units: ohm. The null point is left of the centre, so X is less than R = 10 ohm, as found.

Example 2 (easy)

In an Ohm law experiment the readings are V = 0.5, 1.0, 1.5, 2.0, 2.5 V and I = 0.020, 0.041, 0.060, 0.080, 0.101 A. Find the resistance of the wire, in ohm, from the slope of the best-fit line of I against V.

Marks-style solution of example 2
StepMarks
Resistance is the reciprocal of the slope of the I against V line (the slope of V against I).1
Least-squares slope of I against V over the five points = 0.0402 A/V.2
R = 1/0.0402 = 24.9 ohm.1
Total: 4 marks4

Answer: about 24.9 ohm

Fast method: Single-point ratios V/I vary from 24.4 to 25.0 ohm; the best-fit line gives 24.9 ohm.

Sanity check: Units: ohm. Every individual V/I lies between 24.4 and 25.0 ohm, so the slope value 24.9 ohm is within the spread.

Example 3 (medium)

In a half-deflection experiment R = 3000 ohm and the shunt that halves the deflection is S = 60 ohm. The cell has emf 1.5 V and negligible internal resistance, and the first deflection was 25 divisions. Find G, in ohm.

Marks-style solution of example 3
StepMarks
G = R S/(R - S).1
G = 3000 x 60/(3000 - 60) = 180000/2940.1
G = 61.2 ohm.1
Total: 3 marks3

Answer: about 61.2 ohm

Fast method: Since R is much greater than S, G is close to S = 60 ohm; the exact formula gives 61.2 ohm.

Sanity check: Units: ohm. G is slightly above S (61.2 against 60), as the formula requires, and not far from it because R is large.

Example 4 (medium)

A concave mirror is placed on an optical bench. The object pin is at 36.0 cm from the pole and the image pin that is free of parallax is at 45.0 cm. Find the focal length, in cm.

Marks-style solution of example 4
StepMarks
Both distances are on the same side, so use 1/f = 1/u + 1/v with magnitudes.1
f = u v/(u + v) = 36.0 x 45.0/81.0.1
f = 20.0 cm, so the radius of curvature is 40.0 cm.1
Total: 3 marks3

Answer: f = 20.0 cm

Fast method: f = 36 x 45/81 = 20 cm.

Sanity check: Units: cm. The object at 36 cm lies between f = 20 cm and 2f = 40 cm, so the real image must lie beyond 2f, and 45 cm does.

Typical trap: Reading the sign convention too literally and writing u = +36 cm. In magnitudes 1/f = 1/u + 1/v; with the sign convention u and v are both negative for a real object and real image, and f is negative.

Example 5 (medium)

For a prism of angle 60 degrees the i-delta curve has its minimum deviation at 37.2 degrees. Find the refractive index.

Marks-style solution of example 5
StepMarks
mu = sin((A + delta_min)/2)/sin(A/2).1
(A + delta_min)/2 = (60 + 37.2)/2 = 48.6 degrees; sin 48.6 degrees = 0.750.1
sin 30 degrees = 0.500, so mu = 0.750/0.500 = 1.50.1
Total: 3 marks3

Answer: about 1.50

Fast method: mu = sin 48.6/sin 30 = 1.50.

Sanity check: Units: none. A glass prism gives mu between 1.4 and 1.7, so 1.50 is plausible, and at this angle of incidence of 48.6 degrees the ray is symmetric inside the prism.

Example 6 (hard, multi-step)

In the Zener characteristic experiment the reverse current is negligible up to about 5 V, and then two readings on the steep part of the curve are 2.0 mA at 6.10 V and 14.0 mA at 6.40 V. Taking the steep part as a straight line, find the reverse breakdown voltage V_z, in V, from its intercept on the voltage axis.

Marks-style solution of example 6
StepMarks
Slope of the steep part: dI/dV = (14.0 - 2.0) mA/(6.40 - 6.10) V = 40 mA/V, so the dynamic resistance is 25 ohm.2
Extend the line down to zero current: the voltage must fall by 2.0 mA/(40 mA/V) = 0.05 V from 6.10 V.2
V_z = 6.10 - 0.05 = 6.05 V.1
Total: 5 marks5

Answer: 6.05 V

Fast method: V_z = 6.10 - 2.0 x 0.30/12.0 = 6.10 - 0.05 = 6.05 V.

Sanity check: Units: V. The intercept lies just below the first steep reading of 6.10 V and above the 5 V where the current is negligible, as a knee should; the 25 ohm dynamic resistance is small compared with an ordinary diode below its knee, which is what holds the voltage nearly constant.

Typical trap: Taking the first voltage at which any reverse current appears as V_z. V_z is read where the steep part of the curve, extended to zero current, meets the voltage axis.

Example 7 (medium)

A glass slab is studied with a travelling microscope. The microscope reading for the mark on the table is 1.000 cm; after the slab is placed over the mark, the reading for the mark seen through the slab is 1.700 cm; the reading for powder on the top surface of the slab is 3.000 cm. Find the refractive index of the glass.

Marks-style solution of example 7
StepMarks
Real thickness = reading on the top surface minus reading on the mark without the slab = 3.000 - 1.000 = 2.000 cm.1
Apparent thickness = 3.000 - 1.700 = 1.300 cm.1
mu = real/apparent = 2.000/1.300 = 1.54.1
Total: 3 marks3

Answer: about 1.54

Fast method: mu = (R3 - R1)/(R3 - R2) = 2.000/1.300 = 1.54.

Sanity check: Limiting case: the index has no unit and exceeds 1; the apparent thickness is less than the real thickness, so mu is above 1, and 1.54 is a usual value for glass.

Example 8 (hard, multi-step)

A resistor is connected to a cell, an ammeter and a voltmeter with the voltmeter across the resistor only. The voltmeter reads 2.00 V, the ammeter reads 25.0 mA and the voltmeter resistance is 1000 ohm. Find the true resistance of the resistor, in ohm.

Marks-style solution of example 8
StepMarks
The voltmeter draws 2.00/1000 = 2.0 mA of the 25.0 mA.1
The current through the resistor is 25.0 - 2.0 = 23.0 mA.1
R = 2.00/0.0230 = 87.0 ohm.1
Total: 3 marks3

Answer: about 87.0 ohm

Fast method: R = V/(I - V/R_v) = 2.00/(0.025 - 0.002) = 87.0 ohm.

Sanity check: Units: ohm. The apparent value V/I = 80 ohm is lower than 87.0 ohm, as it must be when the voltmeter shunts the resistor, so the correction goes the right way.

Typical trap: Using the apparent value V/I = 80 ohm, or adding the voltmeter current to the ammeter reading (giving 74 ohm). The voltmeter current must be subtracted from the ammeter current.

Formulas and units

Formula and unit box for Electricity and optics experiments: metre bridge, Ohm law, galvanometer, mirrors, lenses, prism, diodes
ResultFormulaValid whenUnits or noteWorked example
Metre bridgeX = R l/(100 - l)balanced bridge at null point; l in cm measured from the end where X sits, R in the other gapohm (l in cm)Example 1
Resistivity from a wirerho = X pi d²/(4 L)uniform wire of circular cross-section; d diameter, L lengthohm mnone
Ohm law (graph)R = slope of V against Iohmic conductor at steady temperature, line through the originohmExample 2
Voltmeter loading correctionR = V/(I - V/R_v)voltmeter across the resistor only, ammeter reading the total current; R_v the voltmeter resistanceohmExample 8
Galvanometer resistance (half deflection)G = R S/(R - S)half-deflection method, cell internal resistance negligible, R much larger than GohmExample 3
Figure of meritk = E/((R + G) theta)galvanometer in series with R, deflection theta in divisions, cell resistance negligibleA per divisionnone
Lens or mirror by parallax1/f = 1/u + 1/v; f = u v/(u + v) in magnitudesthin lens or mirror, small aperture, real distances taken as magnitudescmExample 4
Error in fdf/f² = du/u² + dv/v²small errors in u and v, maximum error estimatecmnone
Prism refractive indexmu = sin((A + delta_min)/2)/sin(A/2)prism of angle A at minimum deviation, delta_min and A in the same angle unitdimensionlessExample 5
Diode dynamic resistancer = dV/dI (slope)any diode on a smooth region of its I-V curve, small changes about the operating pointohmExample 6
Zener breakdown voltage (reading) and regulator currents (extension)V_z: intercept of the steep reverse curve on the voltage axis; extension: I_z = (V_in - V_z)/R_s - V_z/R_LV_z: steep reverse breakdown region; I_z: Zener with series resistor R_s and load R_L, regulatingAExample 6

Use your browser's print command to print this page; the formula box prints on its own page. Download the one-page formula sheet (PDF).

Common mistakes and speed

  • Writing the metre bridge ratio the wrong way round. Why it tempts: Either l/(100 - l) or (100 - l)/l looks plausible; the length on the side of X goes with X.
  • Using V/I (static) instead of dV/dI for the dynamic resistance of a diode. Why it tempts: Resistance is first met as V/I, and the static values appear as options; dynamic resistance is a slope.
  • Taking the half-deflection G as equal to the shunt S without the correction. Why it tempts: When R is large, G is close to S, so the shortcut appears to work; the exact formula is G = R S/(R - S).
  • Adding the relative errors of u and v to get the relative error of f. Why it tempts: The product rule for errors is learnt first; here 1/f is a sum, so df/f² = du/u² + dv/v².
  • Ignoring the current drawn by the voltmeter in an Ohm law experiment. Why it tempts: The ideal voltmeter is the default assumption; a finite resistance means the ammeter reads extra current.
  • Using the prism angle in place of half of it in the formula for mu. Why it tempts: Both A and delta_min appear, and sin A/sin delta looks like a Snell-type ratio; the formula uses (A + delta_min)/2 and A/2.

Time per question and fast method

Target: about 120 seconds per question.

Name the experiment and write its formula in one line. For the metre bridge write l : (100 - l) directly; for half deflection use G = R S/(R - S) and note G is slightly above S; for parallax use f = u v/(u + v); for diodes use change over change (dV/dI). For error questions differentiate the formula first.

Recall quiz

Pick an option for each question. Your answers stay on this page and are not sent anywhere.

Question 1. A metre bridge has X in the left gap and R = 6 ohm in the right gap, and the null point is at 30.0 cm. If X and R are interchanged, where is the null point, in cm from the left end?
Show the answer

Answer: C: 70 cm. Interchanging the resistances changes l to 100 - l = 70 cm.

Question 2. A wire gives a V against I graph through the origin with V = 3.0 V at I = 0.15 A. What is its resistance, in ohm?
Show the answer

Answer: B: 20 ohm. R = V/I = 3.0/0.15 = 20 ohm.

Question 3. With a convex lens the object pin and the image pin coincide when both are 40 cm from the lens. What is the focal length, in cm?
Show the answer

Answer: B: 20 cm. u = v = 2f, so f = 40/2 = 20 cm.

Question 4. A prism of angle 60 degrees has minimum deviation 30 degrees. What is the refractive index?
Show the answer

Answer: B: 1.41. mu = sin 45 degrees/sin 30 degrees = 1.41.

Question 5. In which bias does a Zener diode operate as a voltage reference?
Show the answer

Answer: B: Reverse bias at breakdown. A Zener holds an almost constant voltage across it in reverse bias at its breakdown voltage.

Question 6. In a travelling microscope experiment on a glass slab the readings are 2.000 cm (mark), 2.600 cm (mark seen through the slab) and 4.000 cm (top surface). What is the refractive index of the glass?
Show the answer

Answer: A: 1.43. Real thickness = 4.000 - 2.000 = 2.000 cm, apparent = 4.000 - 2.600 = 1.400 cm, so mu = 2.000/1.400 = 1.43.

Question 7. A half-deflection experiment gives R = 2400 ohm and S = 96 ohm. What is G, in ohm?
Show the answer

Answer: D: 100 ohm. G = R S/(R - S) = 2400 x 96/2304 = 100 ohm.

Practice

Test your answers nowFull-length mocks

Previous-year questions

Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.

Going deeper and revision

Metre bridge: formula, errors and precautions

X = R l/(100 - l), where l is measured from the end next to X. The sensitivity is greatest when l is close to 50 cm, so R is chosen of the same order as X. Interchanging X and R and taking the mean removes the end-correction errors (the resistance of the copper strips and the zero error of the scale). The percentage error in X from a metre bridge reading is dl/l + dl/(100 - l) in terms of the reading error dl. The resistivity is rho = X A/L = X pi d²/(4 L); the diameter enters squared, so it contributes 2 dd/d to the relative error of rho. Precautions: do not slide the jockey over the wire (it changes the wire cross-section), keep the key open when not in use to avoid heating, and use thick connecting strips of negligible resistance.

Ohm law: graph and meter corrections

The resistance is the slope of the V against I graph, with a best-fit line through all points. For R_v the resistance of the voltmeter, the ammeter current is I = V/R + V/R_v when the voltmeter is across the resistor only, and the true resistance R = V/(I - V/R_v). The apparent value V/I is lower than R. If the ammeter is instead inside the voltmeter connection the apparent value is higher than R by the ammeter resistance. Choose the connection by comparing R with the instrument resistances: a low resistance goes with the voltmeter directly across the resistor only (the ammeter outside the voltmeter connection), which is the arrangement analysed above; the voltmeter across both ammeter and resistor suits a high resistance. Precautions: switch off between readings to avoid heating (a rise in temperature raises the resistance and bends the graph), and check the zero of both meters.

Half deflection: formulas and conditions

The galvanometer current is I_g = E/(R + G) before the shunt. With the shunt S and R unchanged, the circuit resistance changes slightly and the galvanometer current at half deflection satisfies S (R + G)/(R (G + S) + G S) = 1/2, which gives G = R S/(R - S). If R is much larger than S, G is almost equal to S. The figure of merit is the current for one division: k = E/((R + G) theta) A/division, and the current sensitivity is its reciprocal. Conditions: the cell of negligible internal resistance (or its resistance included in R), R large so that the current is small, and the shunt connected across the galvanometer without changing R. Conversion (extension from Current Electricity, not a named experiment): a galvanometer of full-scale current I_g and resistance G becomes an ammeter with a shunt and a voltmeter with a series resistance; these are direct applications, not separate experiments.

Parallax, lens and mirror: methods and error

For a convex lens, f = u v/(u + v) with magnitudes; the special case u = v = 2f gives f = (u + v)/4 and is a quick check. The error in f follows from df/f² = du/u² + dv/v², so relative errors in u and v are weighted by f/u and f/v and are not simply added. For a concave mirror, with the object pin and its image at the centre of curvature, u = v = R and f = R/2. For a convex mirror, an auxiliary convex lens forms a real image at a point I; the mirror is placed so that the rays retrace their path to the same point, and then the distance from the mirror to I is the radius of curvature. The index error of the optical bench (distance between the pin tip and the marker) must be applied to u and v before use.

Prism deviation graph, glass slab and diodes

In the i-delta graph the deviation falls to a minimum at i = (A + delta_min)/2 and rises again; two different incident angles give the same deviation, and they satisfy i1 + i2 = A + delta. Then mu = sin((A + delta_min)/2)/sin(A/2). For a glass slab and a travelling microscope, mu = real depth/apparent depth = (reading 1 to reading 3)/(reading 2 to reading 3) from the three focusings (the mark, the mark seen through the slab, and the powder on top). For a p-n diode, silicon has a forward knee near 0.7 V and a very small reverse current; the dynamic resistance dV/dI falls sharply above the knee. A Zener diode is operated in reverse bias. To find the reverse breakdown voltage, take reverse voltage and current readings in small steps (reverse current is tiny at first), plot reverse current against reverse voltage, and read V_z at the sharp knee where the current rises steeply while the voltage stays nearly constant; extending the steep straight part back to zero current gives V_z. Identification of a diode, LED, resistor or capacitor uses a multimeter in ohmmeter mode: a diode (and an LED) reads low in one direction and very high in the other, a resistor reads the same value in both directions, and a capacitor reading starts low and rises towards a high value as it charges, then stays high. An LED behaves as a diode in this test; telling it from a plain diode needs its visible construction or a lit-up test circuit, not the ohmmeter alone.

Memory hook

Suppose you stretch one long uniform wire along a school bench, hang two coils on its two ends, and slide a pointer along it until a sensitive meter needle in the middle stays at zero.

  1. When the needle stays at zero, the push on both sides is balanced, so no current flows through the meter.
  2. The wire on the left and the wire on the right share one thickness, so their resistances are in the ratio of their lengths.
  3. The unknown on the left and the known on the right must then be in the same ratio as the two wire lengths.

At the null point of a metre bridge the bridge is balanced, so X/R = l/(100 - l) with the lengths standing in for the resistances.

Needle at zero, balanced bridge: resistances in the ratio of lengths.

Revision card

Try to answer each without looking above.

  1. Write the metre bridge formula and the resistivity relation, and say what happens to l when X and R are swapped.
  2. State how the resistance is read from a V-I graph and how a finite voltmeter resistance corrects it.
  3. Write the half-deflection formula for G and the figure of merit.
  4. Give the lens and mirror formulas used with parallax and the error in f.
  5. Write the prism formula for mu from the minimum deviation and the condition for minimum deviation.
  6. Say what dynamic resistance is, and how the breakdown voltage of a Zener diode is read from its reverse characteristic.

Sources and review

Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.

  • Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
  • Reviewer: independent verifier agent run (not the author)
  • Date: 2026-11-20
  • Defects found: 4; fixed: 4
  • Report: content/reviews/learn8-exp-2026-11-21.md

Textbook references

  • NCERT Physics Laboratory Manual (Class XI and Class XII), Class XII manual: EXPERIMENTS EXPERIMENT 1 AIM To determine resistance per unit length o, Experiment 2 Metre bridge: resistance of a wire and resistivity (read 2026-11-22)
  • NCERT Physics Laboratory Manual (Class XI and Class XII), Class XII manual: EXPERIMENT 6 AIM To determine the resistance of a galvanometer by half, Experiment 6 Resistance of a galvanometer by half-deflection method (read 2026-11-22)
  • NCERT Physics Laboratory Manual (Class XI and Class XII), Class XII manual: EXPERIMENT 10 AIM To find the focal length of a convex lens by plottin, Experiment 10 Focal length of a convex lens (u-v and 1/u-1/v graphs) (read 2026-11-22)
  • NCERT Physics Laboratory Manual (Class XI and Class XII), Class XII manual: LABORATORY MANUAL EXPERIMENT11 AIM To find the focal length of a conve, Experiment 13 (Suggested additional activities) Angle of minimum deviation for a glass prism (read 2026-11-22)
  • NCERT Physics Laboratory Manual (Class XI and Class XII), Class XII manual: EXPERIMENTS EXPERIMENT 1 AIM To determine resistance per unit length o, Experiment 1 Calculations (read 2026-11-22)
  • NCERT Physics Laboratory Manual (Class XI and Class XII), Class XII manual: EXPERIMENT 6 AIM To determine the resistance of a galvanometer by half, Experiment 7 Conversion of galvanometer into a voltmeter (read 2026-11-22)
  • NCERT Physics Laboratory Manual (Class XI and Class XII), Class XII manual: EXPERIMENT8 AIM To determine the frequency of alternating current usin, Experiment 9 Parallax (read 2026-11-22)
  • NCERT Physics Laboratory Manual (Class XI and Class XII), Class XII manual: LABORATORY MANUAL EXPERIMENT11 AIM To find the focal length of a conve, Experiment 11 Principle (read 2026-11-22)
  • NCERT Physics Laboratory Manual (Class XI and Class XII), Class XII manual: LABORATORY MANUAL EXPERIMENT11 AIM To find the focal length of a conve, Experiment 13 Principle (read 2026-11-22)
  • NCERT Physics Laboratory Manual (Class XI and Class XII), Class XII manual: EXPERIMENT14 AIM To determine refractive index of a glass slab using a, Experiment 14 Principle (read 2026-11-22)
  • NCERT Physics Laboratory Manual (Class XI and Class XII), Class XII manual: EXPERIMENT14 AIM To determine refractive index of a glass slab using a, Experiment 16 Terms and definitions (read 2026-11-22)
  • NCERT Physics Laboratory Manual (Class XI and Class XII), Class XII manual: EXPERIMENT14 AIM To determine refractive index of a glass slab using a, Experiment 17 Principle (read 2026-11-22)
  • NCERT Physics Laboratory Manual (Class XI and Class XII), Class XII manual: LABORATORY MANUAL ACTIVITY 7 164 AIM To study the effect of intensity , Activity 8 Identify a diode, LED, transistor, IC, resistor and capacitor (read 2026-11-22)

Sources used

  • NTA JEE (Main) 2026 syllabus, Physics, Unit 20 (https://jeemain.nta.nic.in/document/syllabus-2026/), read for scope
  • Standard results of school-level practical physics; no textbook section reference attached yet (to be sourced at verification). Content written fresh for this site.

How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.