Purification of Organic Compounds: JEE Main Notes
Reviewed Last updated 2026-11-21. Syllabus topic: Purification techniques.
In short. Choose the purification method from the property that differs: solubility for crystallisation, sublimation for a solid that vaporises directly, boiling point for distillation, solvent distribution for extraction, and adsorption for chromatography. For chromatography, Rf = distance moved by the compound / distance moved by the solvent front.
- Crystallisation uses a difference in solubility with temperature; sublimation separates a sublimable solid (naphthalene, camphor, ammonium chloride, iodine) from a non-sublimable one.
- Simple distillation needs a boiling-point gap of about 40 K or more; closer boiling points need fractional distillation; a liquid that decomposes near its boiling point is distilled under reduced pressure.
- Differential extraction moves a compound into a second immiscible solvent in which it is more soluble; several small portions extract more than one large portion.
- Chromatography separates by different adsorption on a stationary phase against different solubility in the moving phase; Rf is always between 0 and 1 and is measured from the starting line.
- Acid-base extraction works because the ionic salt of an acid or base dissolves in water and the neutral compound stays in the organic solvent.
Syllabus line: PURIFICATION AND CHARACTERISATION OF ORGANIC COMPOUNDS Purification - Crystallization, sublimation, distillation, differential extraction and chromatography principles and their applications. Qualitative analysis - Detection of nitrogen, sulphur, phosphorus and halogens. Quantitative analysis (basic principles only) - Estimation of carbon, hydrogen, nitrogen, halogens, sulphur and phosphorus. Calculations of empirical formulae and molecular formulae, numerical problems in organic quantitative analysis, (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 13 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Some basic concepts of chemistry (lesson planned): Percentages, ratios and mole arithmetic are used in every numerical problem here. Read this first if mass and mole conversions are slow.
- Solutions (lesson planned): Solubility and the idea of a saturated solution are the basis of crystallisation and extraction. Read this first if saturation is unclear.
Related topics
- Some Basic Concepts of Chemistry (lesson planned)
- Solutions (lesson planned)
- Qualitative and quantitative analysis, empirical and molecular formulae
- Principles Related to Practical Chemistry (lesson planned)
The concept step by step
Step 1: Why a crude organic compound needs purification
A compound made in the laboratory or extracted from a natural source is mixed with starting materials, by-products and solvents. Before its formula or properties can be measured, it must be purified, and its purity is checked by a sharp melting point or a constant boiling point. The method is chosen by asking which physical property of the compound differs from that of the impurity.
Step 2: Crystallisation and sublimation for solids
In crystallisation the impure solid is dissolved in the minimum of a hot solvent in which it is much more soluble hot than cold, the solution is filtered hot to remove insoluble impurity, and cooling gives pure crystals while soluble impurity stays in the mother liquor. In sublimation, a solid that passes directly into vapour on heating, such as naphthalene, camphor, iodine or ammonium chloride, is separated from a non-volatile solid, and the vapour is condensed on a cold surface.
Step 3: Distillation for liquids
Simple distillation separates liquids with a large boiling-point difference (about 40 K or more) or a liquid from a non-volatile solid. Fractional distillation uses a fractionating column to separate liquids whose boiling points are close, as in petroleum fractions. Distillation under reduced pressure lowers the boiling point, so a liquid that would decompose at its normal boiling point, such as glycerol, can be distilled safely.
Step 4: Differential extraction
A compound dissolved in water can be shaken with an immiscible organic solvent, such as diethyl ether, in a separating funnel. It distributes itself between the two layers in a fixed ratio at a given temperature, and if it is more soluble in the organic layer most of it moves there. Several extractions with small portions of solvent remove more compound than one extraction with the same total volume. An acid can also be pulled into water as its salt, leaving neutral compounds in the organic layer.
Step 5: Chromatography
In chromatography a mixture is carried by a moving phase over a stationary phase, and components that are adsorbed more strongly move more slowly. In thin-layer chromatography (TLC) a spot of the mixture is placed on a starting line on a coated plate and the plate is developed in a solvent. The retardation factor Rf = (distance moved by the compound from the starting line) / (distance moved by the solvent front from the starting line) is a number between 0 and 1, characteristic of the compound in that solvent.
Step 6: Choosing the method in an exam question
Read the physical state and stability of the components first. Two solids with different solubility: crystallisation. One sublimable solid: sublimation. Liquids: use the boiling-point gap and thermal stability to decide between simple, fractional and reduced-pressure distillation. A compound in one solvent that dissolves better in another: extraction. A mixture of similar compounds, especially coloured or small amounts: chromatography, with Rf values used to compare spots.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
In TLC the solvent front moved 7.5 cm from the starting line and a compound moved 3.0 cm from the starting line. Find its Rf.
| Step | Marks |
|---|---|
| Rf = distance moved by the compound / distance moved by the solvent front, both from the starting line. | 1 |
| Rf = 3.0 / 7.5. | 1 |
| Rf = 0.40. | 1 |
| Total: 3 marks | 3 |
Answer: Rf = 0.40
Fast method: 3.0 / 7.5 = 2/5 = 0.40.
Sanity check: Rf is dimensionless and must lie between 0 and 1; 0.40 does, and the compound moved less than the front, as it must.
Example 2 (easy)
A solid has a solubility of 25 g per 100 mL of water at 353 K and 5 g per 100 mL at 283 K. A saturated solution made at 353 K using 200 mL of water is cooled to 283 K. What mass of pure solid crystallises, assuming the impurity stays dissolved?
| Step | Marks |
|---|---|
| Dissolved at 353 K in 200 mL: 25 x 2 = 50 g. | 1 |
| Still dissolved at 283 K in 200 mL: 5 x 2 = 10 g. | 1 |
| Crystallised = 50 - 10 = 40 g. | 1 |
| Total: 3 marks | 3 |
Answer: 40 g
Fast method: Difference of solubilities 20 g per 100 mL, times 2 (for 200 mL) = 40 g.
Sanity check: The recovered mass (40 g) is less than the mass dissolved hot (50 g), and 80 percent of it is recovered, which is reasonable for a steep solubility curve.
Example 3 (medium)
The starting line on a TLC plate is 1.5 cm above the bottom edge. After development the solvent front is at 9.5 cm and the spot centre at 5.1 cm, both measured from the bottom edge. Find Rf.
| Step | Marks |
|---|---|
| Distance moved by the compound = 5.1 - 1.5 = 3.6 cm. | 2 |
| Distance moved by the solvent = 9.5 - 1.5 = 8.0 cm. | 2 |
| Rf = 3.6 / 8.0 = 0.45. | 1 |
| Total: 5 marks | 5 |
Answer: Rf = 0.45
Fast method: Subtract the baseline from both readings before dividing.
Sanity check: The wrong value 0.54 is larger than 0.45 because the common offset is left in the numerator; removing the offset must lower the fraction when the compound lags behind the front.
Example 4 (medium)
Two compounds have Rf values 0.25 and 0.60 in a solvent. The solvent front is allowed to travel 8.0 cm from the starting line. How far apart are the spot centres, and which compound is more strongly adsorbed?
| Step | Marks |
|---|---|
| Distance moved = Rf x 8.0: 0.25 x 8.0 = 2.0 cm and 0.60 x 8.0 = 4.8 cm. | 2 |
| Separation = 4.8 - 2.0 = 2.8 cm. | 1 |
| The compound with Rf 0.25 moves less, so it is more strongly adsorbed. Separation 2.8 cm. | 1 |
| Total: 4 marks | 4 |
Answer: 2.8 cm; the compound with Rf 0.25 is more strongly adsorbed
Fast method: Separation = (0.60 - 0.25) x 8.0 = 0.35 x 8.0 = 2.8 cm.
Sanity check: The separation cannot exceed the front distance 8.0 cm, and 2.8 cm is a fraction (0.35) of it, equal to the Rf difference.
Example 5 (hard, multi-step)
A 30.0 g impure sample is 80 percent compound X by mass and the rest is a soluble impurity. X dissolves to 40.0 g per 100 mL of hot solvent and 5.0 g per 100 mL of cold solvent. The minimum volume of hot solvent is used to dissolve X, then the solution is cooled. Find the mass of pure X that crystallises.
| Step | Marks |
|---|---|
| Mass of X in the sample = 0.80 x 30.0 = 24.0 g. | 1 |
| Minimum hot solvent = 24.0 / 40.0 x 100 = 60 mL. | 2 |
| X that stays dissolved in 60 mL of cold solvent = 5.0 x 60 / 100 = 3.0 g. | 1 |
| Crystallised X = 24.0 - 3.0 = 21.0 g; the soluble impurity stays in the mother liquor. | 1 |
| Total: 5 marks | 5 |
Answer: 21.0 g
Fast method: Recovery = (hot solubility - cold solubility) x volume / 100 = 35 x 60 / 100 = 21.0 g.
Sanity check: Grams are the unit asked; 21.0 g is less than the 24.0 g of X present, as it must be, and the loss of 3.0 g is the cold solubility.
Example 6 (hard)
An ether solution contains four compounds: a carboxylic acid, a sulphonic acid, a phenol and a neutral hydrocarbon. It is shaken with aqueous sodium hydrogencarbonate. How many of the four compounds move into the aqueous layer?
| Step | Marks |
|---|---|
| Hydrogencarbonate neutralises only an acid stronger than carbonic acid. | 1 |
| Carboxylic acids and sulphonic acids are stronger than carbonic acid and form water-soluble sodium salts. | 1 |
| A phenol is weaker than carbonic acid and the hydrocarbon is neutral, so both stay in the ether. | 1 |
| Compounds transferred to the aqueous layer: 2. | 1 |
| Total: 4 marks | 4 |
Answer: 2
Fast method: Count the acids stronger than carbonic acid: carboxylic and sulphonic, so two.
Sanity check: Of four compounds, the two acids stronger than carbonic acid are removed, the other two cannot lose a proton to hydrogencarbonate; the count cannot exceed the 3 acidic compounds present, and 2 does not.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Retardation factor | Rf = (distance moved by compound) / (distance moved by solvent front), both from the starting line | both distances measured from the starting line, same plate and solvent | dimensionless, between 0 and 1 | Example 1 |
| Spot position | distance of spot from starting line = Rf x (distance of solvent front) | Rf known for the same plate and solvent; distance from starting line | cm | Example 4 |
| Separation of two spots | separation = (Rf2 - Rf1) x (distance of solvent front) | both spots on one plate; front distance from starting line | cm | Example 4 |
| Crystallisation recovery | mass crystallised = (solubility hot - solubility cold) x volume / 100 | saturated hot solution; impurity stays dissolved; solubility in g per 100 mL | g (with solubility in g per 100 mL) | Example 2 |
| Differential extraction | several small portions of solvent extract more than one large portion of the same total volume | not applicable | not applicable | none |
| Choice of distillation | gap of about 40 K or more: simple; small gap: fractional; decomposes near its boiling point: reduced pressure | not applicable | K | none |
| Sublimable solids to recall | naphthalene, camphor, anthracene, iodine, ammonium chloride | not applicable | not applicable | none |
Common mistakes and speed
- Measuring Rf from the bottom edge of the plate instead of from the starting line. Why it tempts: A ruler is laid along the plate edge, so the printed readings look like the distances to use, and the offset of the starting line is easy to forget.
- Suggesting simple distillation for two liquids whose boiling points are only a few kelvin apart. Why it tempts: Distillation is the familiar method for liquids, and the word fractional is overlooked in the option list.
- Saying that phenol is extracted by aqueous sodium hydrogencarbonate along with a carboxylic acid. Why it tempts: Both are called acids and both react with sodium hydroxide, so the difference in strength compared with carbonic acid is forgotten.
- Thinking that sublimation can separate any two solids, such as sugar from salt. Why it tempts: Sublimation is learned as a method for solids, and the requirement that one solid must vaporise on heating is dropped.
- Believing that one extraction with the whole volume of solvent is better than several with small portions. Why it tempts: It seems that more solvent at once must remove more solute, but each fresh portion works on a lower remaining concentration.
- Using distillation under reduced pressure for a liquid that is already stable, or normal pressure for glycerol. Why it tempts: The reason for lowering the pressure (to lower the boiling point and avoid decomposition) is forgotten and the method is chosen by name.
Time per question and fast method
Target: about 75 seconds per question.
For Rf, subtract the baseline from both readings and divide. For method selection, ask which property differs: boiling-point gap of about 40 K or more means simple distillation, a small gap means fractional, decomposition means reduced pressure. For acid-base extraction, remember that hydrogencarbonate takes carboxylic and sulphonic acids but not phenols.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 5 correct. Pick an option for each question.
Practice
- On a thin-layer chromatography plate the starting line is drawn 1.0 cm above the bottom edge. After… Verified (T1)
- An ether solution contains benzoic acid, phenol and naphthalene. The solution is shaken with aqueous sodium… Verified (T1)
- Two compounds have Rf values of 0.30 and 0.45 in a given solvent on a given plate. The two spots must end up… Verified (T1)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Crystallisation: principle and procedure
The solvent is chosen so that the compound is sparingly soluble in it at room temperature and very soluble when hot, and the impurity is either very soluble at all temperatures (it stays in the mother liquor) or insoluble (removed by hot filtration). A saturated solution is made at the boiling point, filtered hot, and allowed to cool slowly; large pure crystals form. The mass recovered on cooling is the difference between the amount dissolved at the high temperature and the amount that stays dissolved at the low temperature, so a solvent with a steep solubility-temperature curve gives a better recovery. Fractional crystallisation separates two solids whose solubilities differ, by repeating the process.
Sublimation
Sublimation applies only when the desired solid has a vapour pressure high enough below its melting point to vaporise without melting, while the impurity is non-volatile. Standard examples used in the syllabus context are naphthalene, camphor, anthracene, iodine and ammonium chloride. The vapours are cooled on an inverted funnel or a cold finger and the pure solid is collected. Common salt, cane sugar and most inorganic salts do not sublime, so they can serve as the non-volatile impurity. A mixture of two sublimable solids cannot be separated by sublimation alone.
Distillation: simple, fractional, reduced pressure and steam
A liquid boils when its vapour pressure equals the external pressure. Simple distillation boils the mixture and condenses the vapour, and is effective when the liquids differ in boiling point by about 40 K or more, or when the impurity is non-volatile. Fractional distillation repeats the vaporise-condense cycle on the surfaces of a fractionating column, so liquids with close boiling points are separated; the more volatile fraction comes off first. Distillation under reduced pressure is used for liquids that decompose at or below their normal boiling point, for example glycerol separated from spent soap lye. Steam distillation is used for a liquid immiscible with water and volatile in steam, such as aniline; it is a direct application of distillation and is mentioned only for recognition.
Differential extraction and acid-base separation
When a solute is shaken with two immiscible solvents, it distributes itself between the two layers in a fixed ratio at a given temperature, and most of it moves into the solvent in which it is more soluble. Each fresh portion of solvent works on a lower remaining concentration, so several small portions extract more than one large portion of the same total volume. Chemical extraction uses acidity: an ether solution containing a carboxylic acid, a phenol and a neutral compound can be treated with aqueous sodium hydrogencarbonate, which converts only the acid stronger than carbonic acid (the carboxylic acid) into its water-soluble salt. A stronger base such as sodium hydroxide would also extract the phenol.
Chromatography: types, Rf and what examiners test
Adsorption chromatography (column and thin-layer) uses a polar adsorbent such as silica gel or alumina; more polar compounds are adsorbed more strongly, move less, and have a smaller Rf. Partition chromatography (paper) uses water held on the paper as the stationary phase. Rf is measured from the starting line to the centre of the spot and from the starting line to the solvent front, and it depends on the compound, solvent and adsorbent, not on how far the front travels. Examiners test: calculating Rf with a baseline offset, the distance between two spots for a given front distance, which component moves faster, the choice of method for a given mixture, the criteria for simple against fractional distillation, and which compounds an extraction removes. Detailed instrument theory is outside the syllabus line, which asks for principles and applications.
Memory hook
Suppose you are sorting a mixed bag of rice and stones before cooking, and later pouring tea through a strainer.
- You pick the method from what differs: stones are heavier and bigger, so you wash and pour off; tea leaves are caught by the strainer. For compounds, the property that differs (solubility, volatility, boiling point, stickiness to a surface) decides the method.
- If you want sugar back from sweet tea, you evaporate the water and let the sugar form crystals: that is crystallisation, where cooling or evaporation leaves the pure solid.
- A few rice grains stick to a wet spoon more than the others and travel slowest when you drag the spoon through a thin film of water: the sticky ones lag behind, like a polar compound on a TLC plate with a small Rf.
Pick the property that differs between the compound and its impurity, then choose the method built on that property.
Different property, different method: solubility crystallises, volatility distils, stickiness chromatographs.
Revision card
Try to answer each without looking above.
- State the property used for crystallisation, sublimation, distillation, extraction and chromatography.
- When is fractional distillation used instead of simple distillation, and when is reduced pressure used?
- Write the formula for Rf and say where both distances are measured from.
- Which compounds sublime: naphthalene, camphor, sugar, ammonium chloride, common salt?
- Why do several small extractions remove more compound than one large extraction?
- Which acid-type compounds does aqueous sodium hydrogencarbonate extract from ether, and which does it leave?
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 3; fixed: 3
- Report: content/reviews/learn8-pur-2026-11-21.md
Textbook references
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 8: Organic Chemistry: Some Basic Principles and Techniques, 8.8.5 Chromatography (Thin Layer Chromatography) (read from the page image, PDF page 28) (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 13, text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
- NCERT Class 11 Chemistry, Organic Chemistry: Some Basic Principles and Techniques (purification section): named as the scope reference only; not opened for this draft, so textbook section references are pending. Content written fresh.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.