Organic Analysis and Formulae: JEE Main Notes and Problems
Reviewed Last updated 2026-11-21. Syllabus topic: Qualitative and quantitative analysis, empirical and molecular formulae.
In short. Convert each element into a product of known formula, weigh or measure it, and take the element's fraction of that product: C from CO2 (12/44), H from H2O (2/18), N from N2 (28 g per 22 400 mL at STP), halogen from AgX, S from BaSO4 (32/233), P from Mg2P2O7 (62/222). Divide percentages by atomic masses for the empirical formula.
- Lassaigne test: sodium fusion gives NaCN, Na2S, NaX; nitrogen gives Prussian blue, sulphur gives a black lead sulphide or violet nitroprusside colour, and N with S gives blood red Fe(SCN)3.
- Liebig: percentage C = (12/44) x (mass of CO2 / mass of compound) x 100 and percentage H = (2/18) x (mass of H2O / mass of compound) x 100.
- Dumas: nitrogen gas is collected over water or KOH, the pressure of dry gas = total pressure - aqueous tension, and percentage N = 28 x V(STP) / 22 400 / mass x 100.
- Kjeldahl: percentage N = 1.4 x (normality x volume in mL of acid consumed by ammonia) / mass of compound; it does not work for nitro, azo and ring-nitrogen compounds.
- Carius method: percentage Cl = (35.5/143.5) x mass AgCl / mass x 100; Br = 80/188 x AgBr; S = 32/233 x BaSO4; P = 62/222 x Mg2P2O7.
- Empirical formula = simplest whole-number ratio of moles of atoms; molecular formula = empirical formula x (molar mass / empirical mass), molar mass = 2 x vapour density.
Syllabus line: PURIFICATION AND CHARACTERISATION OF ORGANIC COMPOUNDS Purification - Crystallization, sublimation, distillation, differential extraction and chromatography principles and their applications. Qualitative analysis - Detection of nitrogen, sulphur, phosphorus and halogens. Quantitative analysis (basic principles only) - Estimation of carbon, hydrogen, nitrogen, halogens, sulphur and phosphorus. Calculations of empirical formulae and molecular formulae, numerical problems in organic quantitative analysis, (NTA JEE (Main) 2026 syllabus, Chemistry, Unit 13 (https://jeemain.nta.nic.in/document/syllabus-2026/))
Before you start
Prerequisites
- Some basic concepts of chemistry (lesson planned): Empirical and molecular formulae, percentage composition and mole ratios are covered there. Read this first if you cannot go from percentages to a formula quickly.
- Purification techniques: An organic compound is purified before it is analysed, so that the percentages belong to one compound. Read this first for the methods and the purity check.
Related topics
- Some Basic Concepts of Chemistry (lesson planned)
- Purification techniques
- Basic Principles of Organic Chemistry (lesson planned)
- Principles Related to Practical Chemistry (lesson planned)
The concept step by step
Step 1: Detect first, then estimate
Organic compounds always contain carbon and hydrogen, and may contain nitrogen, sulphur, phosphorus, halogens and oxygen. Qualitative analysis detects which of these are present, and quantitative analysis finds the percentage of each by mass. Elements other than C and H are tested after the compound is converted into ionic species that dissolve in water, by sodium fusion.
Step 2: Lassaigne's sodium-fusion test
A small piece of sodium is fused with the compound, and the red-hot tube is plunged into water, giving the sodium fusion extract. Nitrogen becomes NaCN, sulphur becomes Na2S, halogens become NaX, and N with S can give NaSCN. Each ion is then tested: cyanide by Prussian blue with FeSO4 and FeCl3, sulphide by a black lead sulphide or a violet colour with sodium nitroprusside, halide by acidifying with HNO3 and adding AgNO3.
Step 3: Weighable products for C, H, N, halogens, S and P
Quantitative analysis converts an element completely into a product with a known formula. Carbon is burnt to CO2 (absorbed in KOH) and hydrogen to H2O (absorbed in anhydrous CaCl2). Nitrogen is measured as N2 gas (Dumas) or as NH3 neutralised by standard acid (Kjeldahl). Halogens, sulphur and phosphorus are converted by the Carius method into AgX, BaSO4 and Mg2P2O7. The mass of the product multiplied by the element's mass fraction in it gives the mass of the element.
Step 4: Turning a measured mass into a percentage
Mass of element = mass of product x (element mass in one mole of product / molar mass of product). Percentage = mass of element / mass of compound x 100. For carbon in CO2 the fraction is 12/44, and for hydrogen in H2O it is 2/18, not 1/18. For nitrogen collected as gas, convert the volume to moles with PV = nRT after removing the aqueous tension, then multiply the moles of N2 by 28.
Step 5: From percentages to the empirical formula
Divide the percentage of each element by its atomic mass to get relative moles, divide all by the smallest, and if a ratio is not a whole number (for example 1.5 or 1.33) multiply all by 2 or 3 to get whole numbers. Oxygen is usually found by difference: percentage O = 100 - sum of the other percentages. The ratios must be whole numbers, and rounding is allowed only for small deviations of about 0.1.
Step 6: From the empirical to the molecular formula
The molar mass M of the compound is given directly, or from vapour density (M = 2 x vapour density relative to hydrogen), or from mass and moles of a gas. The molecular formula is the empirical formula multiplied by n = M / empirical formula mass, a whole number. If two samples are used for two analyses, work with percentages or per-gram amounts, since the masses taken are different.
Worked examples
Each solution shows the marks every step would earn. The sanity check tests units and size of the answer.
Example 1 (easy)
On combustion, 0.30 g of an organic compound gave 0.66 g of carbon dioxide and 0.18 g of water. Find the percentage of carbon and of hydrogen.
| Step | Marks |
|---|---|
| Carbon = 12 x 0.66 / 44 = 0.18 g, so percentage of carbon = 0.18 / 0.30 x 100 = 60. | 2 |
| Hydrogen = 2 x 0.18 / 18 = 0.020 g. | 1 |
| Percentage of hydrogen = 0.020 / 0.30 x 100 = 6.67; carbon 60 percent and hydrogen 6.67 percent. | 1 |
| Total: 4 marks | 4 |
Answer: C = 60 percent, H = 6.67 percent
Fast method: Carbon is 12/44 = 3/11 of the CO2 mass; hydrogen is 1/9 of the H2O mass.
Sanity check: C + H = 66.7 percent, below 100, leaving 33.3 percent for other elements, which is consistent with a compound that may contain oxygen.
Example 2 (easy)
In Dumas' method 0.25 g of a compound gave 42.0 mL of nitrogen measured at STP. Find the percentage of nitrogen (1 mol of gas = 22 400 mL at STP, N = 14 g mol⁻1).
| Step | Marks |
|---|---|
| Moles of N2 = 42.0 / 22 400 = 1.875 x 10⁻3 mol. | 1 |
| Mass of nitrogen = 1.875 x 10⁻3 x 28 = 0.0525 g. | 1 |
| Percentage = 0.0525 / 0.25 x 100 = 21.0. | 1 |
| Total: 3 marks | 3 |
Answer: 21.0 percent
Fast method: 28 g per 22 400 mL is 1.25 mg per mL: 42.0 x 1.25 = 52.5 mg, and 52.5 / 250 = 0.21.
Sanity check: Nitrogen gas has density about 1.25 g per litre at STP, and 42 mL is about 0.05 g, a fifth of the 0.25 g sample.
Example 3 (medium)
In a Kjeldahl determination, 1.50 g of a compound gave ammonia absorbed in 50.0 mL of 0.50 M H2SO4. The excess acid needed 20.0 mL of 1.0 M NaOH. Find the percentage of nitrogen.
| Step | Marks |
|---|---|
| H+ taken = 50.0 x 0.50 x 2 = 50 mmol. | 1 |
| H+ left = NaOH used = 20.0 x 1.0 = 20 mmol, so H+ used by NH3 = 30 mmol. | 2 |
| Nitrogen = 30 mmol x 14 = 0.42 g. | 1 |
| Percentage = 0.42 / 1.50 x 100 = 28. | 1 |
| Total: 5 marks | 5 |
Answer: 28 percent
Fast method: Milliequivalents of acid used = 30; percentage N = 1.4 x 30 / 1.50 = 28.
Sanity check: The wrong monobasic treatment gives a very small acid consumption (5 mmol), while the correct 30 mmol of NH3 gives 0.42 g, below the sample mass 1.50 g as required.
Example 4 (medium)
In the Carius method 0.40 g of an organic compound gave 0.574 g of silver chloride. Find the percentage of chlorine (Ag = 108, Cl = 35.5).
| Step | Marks |
|---|---|
| Molar mass of AgCl = 108 + 35.5 = 143.5 g mol⁻1. | 1 |
| Chlorine in the precipitate = 35.5 x 0.574 / 143.5 = 0.142 g. | 1 |
| Percentage = 0.142 / 0.40 x 100 = 35.5. | 1 |
| Total: 3 marks | 3 |
Answer: 35.5 percent
Fast method: 0.574 / 143.5 = 0.0040 mol AgCl, so 0.0040 x 35.5 = 0.142 g of chlorine.
Sanity check: The chlorine mass (0.142 g) is smaller than the mass of AgCl (0.574 g) and than the sample (0.40 g), as it must be.
Example 5 (medium)
A sulphur-containing compound of mass 0.40 g was oxidised by the Carius method and the sulphate was precipitated as barium sulphate, 0.466 g (Ba = 137, S = 32, O = 16). Find the percentage of sulphur.
| Step | Marks |
|---|---|
| Molar mass of BaSO4 = 137 + 32 + 64 = 233 g mol⁻1. | 1 |
| Sulphur = 32 x 0.466 / 233 = 0.064 g. | 1 |
| Percentage = 0.064 / 0.40 x 100 = 16. | 1 |
| Total: 3 marks | 3 |
Answer: 16 percent
Fast method: 0.466 / 233 = 0.0020 mol, so sulphur 0.064 g; 0.064 / 0.40 = 0.16.
Sanity check: BaSO4 is about 13.7 percent sulphur by mass; the sulphur mass 0.064 g is that fraction of 0.466 g, and it is less than the sample mass.
Example 6 (medium)
A compound has 40.0 percent carbon, 6.7 percent hydrogen and 53.3 percent oxygen, and its molar mass is 180 g mol⁻1. Find its empirical and molecular formulae and the number of carbon atoms per molecule.
| Step | Marks |
|---|---|
| Relative moles: C = 40.0 / 12 = 3.33; H = 6.7 / 1 = 6.7; O = 53.3 / 16 = 3.33. | 1 |
| Dividing by 3.33 gives C : H : O = 1 : 2 : 1, so the empirical formula is CH2O. | 2 |
| Empirical mass = 12 + 2 + 16 = 30; n = 180 / 30 = 6. | 1 |
| Molecular formula C6H12O6, with 6 carbon atoms per molecule. | 1 |
| Total: 5 marks | 5 |
Answer: empirical CH2O, molecular C6H12O6, 6 carbon atoms
Fast method: 40 / 12 and 53.3 / 16 are both about 3.33, and hydrogen is twice that; then 180 / 30 = 6.
Sanity check: The molecular mass of C6H12O6 is 72 + 12 + 96 = 180 g mol⁻1, matching the data; the percentages sum to 100.
Example 7 (hard, multi-step)
0.60 g of a compound of carbon, hydrogen and oxygen on combustion gave 0.88 g of carbon dioxide and 0.36 g of water. Its molar mass is 60 g mol⁻1. Find the molecular formula and the number of hydrogen atoms in a molecule.
| Step | Marks |
|---|---|
| Carbon = 0.88 x 12 / 44 = 0.24 g; hydrogen = 0.36 x 2 / 18 = 0.040 g. | 2 |
| Oxygen by difference = 0.60 - 0.24 - 0.040 = 0.32 g. | 1 |
| Moles: C = 0.020, H = 0.040, O = 0.020, ratio 1 : 2 : 1, empirical formula CH2O of mass 30. | 2 |
| n = 60 / 30 = 2, so the molecular formula is C2H4O2 with 4 hydrogen atoms. | 1 |
| Total: 6 marks | 6 |
Answer: C2H4O2; 4 hydrogen atoms
Fast method: Moles of atoms 0.02 : 0.04 : 0.02 give CH2O at once; 60 / 30 = 2.
Sanity check: Molar mass of C2H4O2 = 24 + 4 + 32 = 60 g mol⁻1, equal to the given value; the masses 0.24 + 0.040 + 0.32 add up to the sample mass 0.60 g.
Example 8 (hard)
In Dumas' method 0.20 g of a compound gave 40.0 mL of nitrogen collected over water at 300 K. The total pressure was 750 mm Hg and the aqueous tension at 300 K is 30 mm Hg. Find the percentage of nitrogen (R = 0.0821 L atm K⁻1 mol⁻1, 760 mm Hg = 1 atm).
| Step | Marks |
|---|---|
| Pressure of dry nitrogen = 750 - 30 = 720 mm Hg = 720 / 760 = 0.9474 atm. | 2 |
| Moles of N2 = PV / RT = 0.9474 x 0.0400 / (0.0821 x 300) = 1.538 x 10⁻3 mol. | 2 |
| Mass of nitrogen = 1.538 x 10⁻3 x 28 = 0.0431 g. | 1 |
| Percentage = 0.0431 / 0.20 x 100 = 21.5. | 1 |
| Total: 6 marks | 6 |
Answer: 21.5 percent
Fast method: Volume at STP = 720 x 40 x 273 / (300 x 760) = 34.5 mL; 34.5 x 1.25 mg = 43.1 mg; 43.1 / 200 = 0.215.
Sanity check: The same gas at 300 K and 720 mm Hg occupies more than at STP (lower pressure and higher temperature both expand it), so the STP volume, 34.5 mL, must be smaller than 40 mL, and it is.
Formulas and units
| Result | Formula | Valid when | Units or note | Worked example |
|---|---|---|---|---|
| Percentage of carbon (Liebig) | %C = (12 / 44) x (mass CO2 / mass compound) x 100 | all carbon converted to CO2 and fully absorbed (Liebig method) | percent by mass | Example 1 |
| Percentage of hydrogen (Liebig) | %H = (2 / 18) x (mass H2O / mass compound) x 100 | all hydrogen converted to H2O and fully absorbed (Liebig method) | percent by mass | Example 1 |
| Percentage of nitrogen (Dumas) | %N = (28 x V(STP) / 22 400) / mass x 100; dry pressure = total pressure - aqueous tension | all N released as N2, volume at STP, dry gas (Dumas method) | V in mL; percent by mass | Example 2 |
| Percentage of nitrogen (Kjeldahl) | %N = 1.4 x (normality x volume of acid used by NH3 in mL) / mass of compound in g | N converted to NH3 (not for nitro, azo or ring N); acid in mL, normality | percent by mass | Example 3 |
| Percentage of halogen (Carius) | %Cl = (35.5 / 143.5) x (mass AgCl / mass) x 100; %Br = (80 / 188) x (mass AgBr / mass) x 100 | halogen fully precipitated as silver halide (Carius method) | percent by mass | Example 4 |
| Percentage of sulphur (Carius) | %S = (32 / 233) x (mass BaSO4 / mass) x 100 | sulphur fully oxidised and precipitated as BaSO4 (Carius method) | percent by mass | Example 5 |
| Percentage of phosphorus | %P = (62 / 222) x (mass Mg2P2O7 / mass) x 100 | phosphorus fully precipitated as Mg2P2O7 | percent by mass | none |
| Empirical formula | ratio of (percentage / atomic mass), divided by the smallest; oxygen % = 100 - sum of the others | percentages by mass add to 100; oxygen found by difference | whole-number ratio | Example 6 |
| Molecular formula | n = molar mass / empirical mass; molar mass = 2 x vapour density (relative to H2) | empirical formula and molar mass known; molar mass = 2 x vapour density | g mol⁻1 | Example 6 |
Common mistakes and speed
- Using the total gas pressure in a Dumas calculation instead of subtracting the aqueous tension. Why it tempts: The question quotes the atmospheric pressure prominently, and the gas looks like pure nitrogen; the water vapour above the water is invisible.
- Treating H2SO4 as monobasic in a Kjeldahl back titration. Why it tempts: Titration problems in school often use HCl or NaOH, so the factor of 2 for a dibasic acid is overlooked when molarity is given.
- Using 1/18 as the hydrogen fraction of water. Why it tempts: The molar mass of water is 18, and the number of hydrogen atoms per molecule (2) is not carried into the fraction.
- Taking the empirical formula as the molecular formula without comparing the molar mass. Why it tempts: The ratio of moles is obtained with effort, and it looks like a finished answer; the final multiplier n is skipped.
- Using the Kjeldahl method for a nitro, azo or ring-nitrogen compound. Why it tempts: It is the standard method for nitrogen and its name is recalled before its limits are.
- Predicting a Prussian blue colour for a compound containing both nitrogen and sulphur, when a blood-red colour is expected. Why it tempts: The nitrogen test is remembered by its blue colour, and the thiocyanate formed when sulphur is also present is forgotten.
Time per question and fast method
Target: about 110 seconds per question.
Carry the element's fraction through in one line: C 12/44, H 2/18, S 32/233, Cl 35.5/143.5, P 62/222, N 28 mg per 22.4 mL at STP. For Kjeldahl use percentage N = 1.4 x milliequivalents of acid used / mass. For formulae, write moles of atoms per sample, divide by the smallest, then compare the empirical mass with the molar mass.
Recall quiz
Pick an option for each question. Your answers stay on this page and are not sent anywhere.
Score: 0 of 5 correct. Pick an option for each question.
Practice
- In Liebig's method, 0.20 g of an organic compound on complete combustion gave 0.44 g of carbon dioxide.… Verified (T1)
- In Dumas' method, 0.30 g of an organic compound gave 50.0 mL of nitrogen collected over water at 300 K. The… Verified (T1)
- In Kjeldahl's method, 1.40 g of an organic compound was digested and the ammonia evolved was passed into 50.0… Verified (T1)
- A compound contains only carbon, hydrogen and nitrogen. Combustion of 0.590 g gave 1.32 g of carbon dioxide… Verified (T1)
- A compound of carbon, hydrogen and oxygen (0.37 g) on combustion gave 0.88 g of carbon dioxide and 0.45 g of… Verified (T3)
- A compound containing carbon, hydrogen, nitrogen and sulphur, but no halogen, is fused with excess sodium, so… Verified (T1)
- A compound contains only carbon, hydrogen and chlorine and has molar mass 85 g mol⁻1. In a Carius… Verified (T1)
- In the estimation of phosphorus, 0.62 g of an organic compound was oxidised to phosphoric acid and… Verified (T1)
- In Dumas' method, 0.35 g of an organic compound gave 70.0 mL of nitrogen collected over water at 300 K. The… Verified (T3)
Previous-year questions
Previous-year questions are not imported yet. Previous-year questions are not imported yet; see the official papers on the NTA site. Official NTA papers page.
Going deeper and revision
Qualitative analysis: nitrogen, sulphur, halogens and phosphorus
In the Lassaigne test, sodium fused with the compound converts the elements into ionic salts (Na + C + N gives NaCN; 2Na + S gives Na2S; Na + X gives NaX), and the aqueous extract is tested. Nitrogen: the extract is boiled with FeSO4, then acidified; Fe2+ and CN- form [Fe(CN)6]4-, which with Fe3+ gives Prussian blue, Fe4[Fe(CN)6]3. Sulphur: acetic acid and lead acetate give a black precipitate of PbS, and sodium nitroprusside gives a violet colour. If both N and S are present, NaSCN may form, and Fe3+ gives a blood-red colour due to Fe(SCN)2+ with no Prussian blue. Halogens: the extract is boiled with dilute HNO3 to expel HCN and H2S, then AgNO3 is added. A curdy white precipitate (AgCl) is soluble in ammonia, a pale yellow precipitate (AgBr) is sparingly soluble, and a yellow precipitate (AgI) is insoluble. Phosphorus: the compound is heated with an oxidising agent such as sodium peroxide to give phosphate, which is boiled with HNO3 and treated with ammonium molybdate to give a yellow colour or precipitate of ammonium phosphomolybdate.
Carbon and hydrogen: Liebig's combustion method
A weighed organic sample is heated with excess dry copper(II) oxide in a stream of oxygen. Carbon is oxidised to CO2 and hydrogen to H2O. Water vapour is absorbed in a weighed tube of anhydrous calcium chloride and CO2 in a weighed tube of concentrated KOH solution, which is placed after the CaCl2 tube. The increases in mass give the masses of H2O and CO2. Percentage of C = (12 / 44) x (mass of CO2 / mass of compound) x 100. Percentage of H = (2 / 18) x (mass of H2O / mass of compound) x 100. A common error is to use 1/18 for hydrogen, which ignores that each water molecule carries two hydrogen atoms. Oxygen, when asked, is obtained by difference.
Nitrogen: Dumas and Kjeldahl methods
Dumas method: the compound is heated with CuO in a stream of CO2; nitrogen (with oxides of nitrogen reduced by hot copper gauze) is collected over concentrated KOH solution, which absorbs CO2. The volume is read at room temperature and pressure, and the pressure of dry nitrogen is the atmospheric (total) pressure minus the aqueous tension at that temperature. Percentage N = (28 x V at STP in mL / 22 400) / mass x 100, or equivalently from n = PV / RT. Kjeldahl method: the compound is heated with concentrated H2SO4 (with K2SO4 and a copper or mercury catalyst) to convert nitrogen into (NH4)2SO4, then boiled with excess NaOH, and the NH3 is absorbed in a known volume of standard H2SO4. The unused acid is titrated with standard alkali. Percentage N = 1.4 x (normality of acid x volume of acid used by NH3 in mL) / mass of compound in g. Kjeldahl's method cannot be used for compounds with nitro or azo groups or for nitrogen in a ring such as pyridine, because the nitrogen is not completely converted into ammonium sulphate.
Halogens, sulphur and phosphorus: Carius method
A weighed compound is heated in a sealed hard-glass Carius tube with fuming nitric acid. For a halogen, silver nitrate is also present and the silver halide formed is filtered, washed, dried and weighed: percentage Cl = (35.5 / 143.5) x (mass of AgCl / mass of compound) x 100, and percentage Br = (80 / 188) x (mass of AgBr / mass of compound) x 100. For sulphur, it is oxidised to sulphuric acid and precipitated as barium sulphate by BaCl2: percentage S = (32 / 233) x (mass of BaSO4 / mass of compound) x 100. For phosphorus, it is oxidised to phosphoric acid, precipitated as magnesium ammonium phosphate, MgNH4PO4, by adding magnesia mixture, and ignited to magnesium pyrophosphate: percentage P = (62 / 222) x (mass of Mg2P2O7 / mass of compound) x 100. Each factor is the element's mass in one mole of precipitate divided by the molar mass, so two P atoms (62 g) appear in one Mg2P2O7 (222 g).
Empirical and molecular formulae: method, edge cases and what examiners test
Empirical formula: percentage divided by atomic mass, divided by the smallest, scaled to whole numbers. Molecular formula: empirical formula x n, with n = molar mass / empirical mass. Examiners test: percentage of C and H from CO2 and H2O masses, nitrogen from a Dumas volume with aqueous tension, Kjeldahl calculations with a dibasic acid and a back titration, Carius calculations for Cl, Br or S, oxygen found by difference, two separate samples for two analyses, vapour density to molar mass, and the number of atoms of an element in a molecule from percentage and molar mass. Calculation traps: using the total pressure in Dumas, forgetting that H2SO4 supplies two H+ per mole, and using 1/18 instead of 2/18 for hydrogen. Instrument details of each method are outside the syllabus line, which asks for basic principles only.
Memory hook
Suppose a mason tells you that a bag of rubble always holds bricks as 12 parts out of every 44 parts by weight, and you weigh 0.44 kg of rubble from a demolished wall.
- You cannot count the bricks in the wall directly, but you know the fixed fraction: 12 out of 44, so 0.44 kg of rubble holds 0.12 kg of brick.
- Dividing by the weight of the original wall sample (0.20 kg) gives 60 percent bricks. This is exactly how a mass of CO2 gives the percentage of carbon.
- If you ask how many bricks of each kind, you divide each weight by the weight of one brick of that kind and compare the counts: the smallest count sets the unit, like finding an empirical formula.
The product of a reaction carries the element in a fixed mass fraction, so weigh the product, apply the fraction, and divide by the sample mass.
Weigh the product, take the element's fraction, divide by the sample, multiply by 100.
Revision card
Try to answer each without looking above.
- Write the sodium-fusion products of N, S and halogens and one colour test for each.
- Write the formulas for percentage C and H from the masses of CO2 and H2O.
- Why must the aqueous tension be subtracted in the Dumas method?
- Write the Kjeldahl formula for percentage N and one class of compounds it cannot be used for.
- State the mass fractions used for Cl in AgCl, S in BaSO4 and P in Mg2P2O7.
- Describe the steps from percentages to the empirical formula and then to the molecular formula.
Sources and review
Reviewed Reviewed on 2026-11-20: every number recomputed by code and independently reviewed; textbook section references pending.
- Method: Every number in worked examples, recall checks and notes recomputed by code; claims recomputed independently by a separate verifier run using other numerical methods; textbook section references not yet attached; wording defects found were fixed afterwards and re-linted (code checks re-run) but not re-reviewed by a second run; syllabus scope compared with the NTA JEE Main 2026 syllabus text (by the verifier; see the report)
- Reviewer: independent verifier agent run (not the author)
- Date: 2026-11-20
- Defects found: 3; fixed: 3
- Report: content/reviews/learn8-pur-2026-11-21.md
Textbook references
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 8: Organic Chemistry: Some Basic Principles and Techniques, 8.10.1 Carbon and Hydrogen (read from the page image, PDF page 31) (read 2026-11-22)
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 8: Organic Chemistry: Some Basic Principles and Techniques, 8.10.2 Nitrogen (read from the page image, PDF page 32) (read 2026-11-22)
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 8: Organic Chemistry: Some Basic Principles and Techniques, 8.10.4 Sulphur (read from the page image, PDF page 34) (read 2026-11-22)
- NCERT Chemistry Part 2, Class 11 (reprint 2026-27), Unit 8: Organic Chemistry: Some Basic Principles and Techniques, 8.10.5 Phosphorus (read from the page image, PDF page 35) (read 2026-11-22)
Sources used
- Syllabus: NTA JEE (Main) 2026 syllabus, Chemistry, Unit 13, text as stored in syllabus/lines/jee-main/2026.json (the extraction may have lost symbols).
- NCERT Class 11 Chemistry, Organic Chemistry: Some Basic Principles and Techniques (qualitative and quantitative analysis sections): named as the scope reference only; not opened for this draft, so textbook section references are pending. Content written fresh.
How labels work: see how answers and lessons are verified. Found a mistake? Use Report an error on any question page.